Ultra Low Capacitance ESD Protection Array
DESCRIPTION FEATURES
Transient protection for high-speed data lines
IEC 61000-4-2(ESD) ±25KV(Air)
±17KV(Contact)
IEC 61000-4-4(EFT)40A(5/50ns)
Cable Discharge Event(CDE)
Package optimized for high-speed lines
Ultra-small package(2.5mm*1.0mm*0.55mm)
Protects four data lines
Low capacitance:0.6pF for each channel
Low leakage current:0.1uA@VRWM(Typical)
Low clamping voltage
Each I/O pin can withstand over 1000 ESD strikes
for ±8KV contact discharge
MACHANICAL DATA
TEP0524PLC is an ultra-low capacitance
Transient Voltage Suppressor (TVS) designed to
protection for high-speed data interfaces. With
typical capacitance of 0.6pF only, TEP0524PLC is
designed to protest parasitic-sensitive systems
against over-voltage and over-current transient
events. It complies with IEC 61000-4-2 (ESD),
Level 4(±15KV air, ±8KV contact discharge),
IEC61000-4-4 (electrical fast transient-EFT)
(40A,5/50ns),very fast charged device model
(CDM)ESD and cable discharge event(CDE),etc.
TEP0524PLC uses ultra-small DFN2510 package.
Each TEP0524PLC device can protect four
high-speed data lines. The combined features of
ultra-low capacitance, ultra-small size and high
ESD robustness make TEP0524PLC ideal for
high-speed data ports and high-frequency lines
(e.g., HDMI &DVI) applications. The low
clamping voltage of the TEP0524PLC guarantees
a minimum stress on the protected IC.
DFN2510 package
Flammability Rating: UL 94V-0
Terminal: Matte tin plated.
Packaging: Tape and Reel
High temperature soldering guaranted:260℃/10s
Reel size: 7 inch
ORDERING INFORMATION APPLICATIONS
Device: TEP0524PLC
Package: DFN2510
Marking: 0524P
Material: Halogen free
Packing: Tape & Reel
Quantity per reel: 3,000pcs
Serial ATA
PCI Express
Desktops, Servers and Notebooks
MDDI Ports
USB 2.0/3.0 Power and Data Line Protection
Display Ports
High Definition Multi-Media Interface (HDMI)
Digital Visual Interface (DVI)
PIN CONFIGURATION PACKAGE OUTLINE
TEP0524PLC
2016 -05
REV:O1
ABSOLUTE MAXIMUM RATING
Symbol Parameter Value Units
VESD
ESD per IEC 61000-4-2 (Air)
ESD per IEC 61000-4-2 (Contact)
±25
±17 kV
TOPT Operating Temperature -55/+125 °C
TSTG Storage Temperature -55/+150 °C
ELECTRICAL CHARACTERISTICS (Tamb=25°°°C)
Symbol Parameter Test Condition Min Typ Max Units
VRWM Reverse Working Voltage Any I/O pin to GND 5.0 V
VBR
Reverse Breakdown
Voltage
IT = 1mA
Any I/O pin to GND 6.0 8.0 10.0 V
IRReverse Leakage Current VRWM = 5V
Any I/O pin to GND 0.1 1.0 μA
VCClamping Voltage IPP = 1A, tp = 8/20μs
Any I/O pin to GND 12 V
CESD Parasitic Capacitance VR = 0V, f = 1MHz
Between I/O and GND 0.6 0.8 pF
CESD Parasitic Capacitance VR = 0V, f = 1MHz
Between I/O and I/O 0.2 0.4 pF
Note: I/O pins are pin 1,2,4,5.
ELECTRICAL CHARACTERISTICS CURVE
RATING AND CHARACTERISTIC CURVES ( TEP0524PLC)
DFN2510 PACKAGE OUTLINE DIMENSIONS
Carrier Tape
Packing Quantity
Reel Inner Box Carton
Size Quantity Per
Reel Size Quantity Per
Reel Size Quantity Per
Reel
7
(inch) 3,000pcs 210*208*203
(mm)45,000pcs 440*440*230
(mm)180,000pcs
7
(inch) 3,000pcs 183*188*80
(mm) 18,000pcs 386*265*215
(mm) 108,000pcs
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE
