6
.156" x .200" SERIES 6022/6024
Rectangular Tails
Series 6007 Contacts
Features
Extended card guides
Ribbon-type contacts with bifurcated
nose
Choice of terminations: solder (wire
hole and P.C. tab), or low-cost
solderless wrap contacts
For 1/16" P.C. card
Specifications
Current rating: 5 amperes
Contact resistance: 6 milliohms,
maximum
Contact material: Phosphor bronze
Contact plating:*
Overall: 50-100 microinches nickel and 10
microinches min. gold overall
Insertion/withdrawal force: 2 to 16
ounces per contact pair, nominal P.C.
card
Insulator material: Polyester per UL 94VO
Insulation resistance: 5000 megohms,
minimum
Dielectric withstanding voltage: 1800
VAC between adjacent contacts, RMS,
at sea level
Ordering Code
Typical Example 00 6022 044 450 001
SERIES
6022 6024
NUMBER OF CONTACTS
6022 6024
* For other type platings and thicknesses please
consult factory.
CONTACT CODE
Single Read-Out
*457 60-6007-06-53 Wire hole special: .227" lg. (2 term.)
551 60-6007-16-23 Wire hole (single sided): .277" lg.
552 60-6007-16-33 P.C. tab (single sided): .202" lg.
*936 60-6007-06-43 Wrap (.016" x .047") special: .497" lg.
*938 60-6007-06-33 P.C. tab special: .215" lg.
*940 60-6007-06-23 Wire hole special: .227" lg.
Dual Read-Out
1450 60-6007-19-23 Wire hole: .277" lg.
451 60-6007-19-33 P.C. tab: .202" lg.
452 60-6007-18-13 Solderless wrap (.016" x .044"): .697" lg.
453 60-6007-18-23 P.C. tab: .347" lg.
454 60-6007-18-33 Solderless wrap (.016" x .044"): .517" lg.
*498 60-6007-05-33 Switching (used in pairs): .202" lg. P.C. tab
*941 60-6007-05-13 Switching (used in pairs): .229" lg. wire hole
Single Readout Dual Readout
22 44
Single Readout Dual Readout
18 36
VARIATION CODE
6022
Plating
Overall
001 44 Dual read-out contacts
installed in all positions
002 22 Single read-out contacts
installed on numbered side
only (551, 552, 936, 938, 940)
003 22 Single read-out contacts
installed on lettered side only
(551, 552, 936, 938, 940)
004 22 Single read-out contacts
installed staggered starting with
position 1, B, 3, D, etc. (936,
938, 940 only)
005 22 Single read-out contacts
installed staggered starting with
position A, 2, C, 4, etc. (936,
938, 940 only)
POLARIZATION
Ordering polarizing insert separately by part number —
B type: 60-6002-3124
C type: 60-6007-3314
D type: 60-6061-3118
6024
Plating
Overall
001 Dual read-out contacts
002 Single read-out contacts with
tails in position “1” to “18”
(551, 552, 936, 938, 940)
003 Single read-out contacts with
tails in positions “A” to “V”
(551, 552, 936, 938, 940)
004 Single read-out contacts with
tails in positions 1-B-3, etc.
(936, 938, 940 only)
005 Single read-out contacts with
tails in positions A-2-C, etc.
(936, 938, 940 only)
POLARIZATION
Ordering polarizing insert separately by part number —
A type: Fits between contacts 60-6002-31-24
B type: Eliminates one contact position 60-6007-33-14
