SPECIFICATION CONTROL DRAWING MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. APPLICATION 1. This sleeve is designed to connect leads having a pretinned conductor and an insulation rated for not less than 125C to terminals having a maximum diameter of 1.27 (0.05) and a height of 5.08 (0.20) minimum. 2. Part may be installed with convection heat. 3. Temperature rating: -65C to 150C. 4. Sleeve will recover to 0.76 (0.03) maximum I.D. THERMOFIT DEVICES 300 Constitution Drive Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A TITLE: SOLDERSLEEVE WIRE TERMINATOR, O1.73 mm I.D. DOCUMENT NO.: D-110-0067 DCR NUMBER: REPLACES: D990734 DRAWN BY: DATE: PROD. REV.: DOC ISSUE: M. FORONDA 06-July-00 A 1 If this document is printed it becomes uncontrolled. Check for the latest revision SCALE: None N/A SIZE: A SHEET: 1 of 1