CUSTOMER DRAWING
TITLE: SOLDERSLEEVE ONE STEP
SHIELD TERMINATION
LOW TEMPERATURE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: CWT-38XX-WX
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
© 2017 TE Connectivity Corporation. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision.
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
3. MELTABLE RING: Thermally stabilized thermoplastic. Color: True Grey or Natural.
4. MELTABLE RING: Thermally stabilized thermoplastic. Color: Blue.
5. GROUND LEAD: W1/W2: Raychem 35C0211 tin plated copper, W4/W5: MIL-W-81822/13 solid silver plated copper.
Part number:
CWT-38XX-WX
Ground lead type:
W1: AWG22, color -white.
W2: AWG22, color -green.
W4: AWG26, color -white.
W5: AWG26, color -blue.
Sizes: from 03 to 09.
APPLICATION
1. These controlled soldering devices are designed for termination of bare or tin plated copper shield on a cable, rated for
at least +85C.
2. Temperature range: -55C to +125C. For installation procedure and application equipment, consult RPIP-824-00.
For best results, prepare
the cable as shown: