Ordering information On-board type SUCW1R5 SUC W 1R5 12 1 2 3 4 12 5 DC OUTPUT 6 P 7 1Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP 7Packing form Blank:Plastic cover P :Tray (SMD type) R MODEL MAX OUTPUT WATTAGE[W] B SUCW1R50512 1.56 VOLTAGE[V] *1 t12 or +24 CURRENT[A] 0.065 SUCW1R50515 1.5 t15 or +30 0.05 SUCW1R51212 1.56 t12 or +24 0.065 SUCW1R51215 1.5 t15 or +30 0.05 SUCW1R52412 1.56 t12 or +24 0.065 SUCW1R52415 1.5 t15 or +30 0.05 SUCW1R54812 1.56 t12 or +24 0.065 SUCW1R54815 1.5 t15 or +30 0.05 SUCW1R51215 SUCW1R52412 DC18 - 36 0.171typ 0.089typ 73typ 73typ t15(+30) t12(+24) SUCW1R52415 SUCW1R54812 DC36 - 76 0.086typ 0.045typ 73typ 73typ t15(+30) t12(+24) SUCW1R54815 0.05 75max 750max 120max 150max 150max 200max 180max 290max 60max 0.05 75max 750max 120max 150max 150max 200max 180max 290max 60max SPECIFICATIONS SU.SUC MODEL VOLTAGE[V] *2 CURRENT[A] INPUT *2 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] -20 to +55C *3 RIPPLE[mVp-p] -40 to -20C *3 -20 to +55C *3 RIPPLE NOISE[mVp-p] OUTPUT -40 to -20C *3 -20 to +55C TEMPERATURE REGULATION[mV] -40 to +55C *4 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING[V] (t5%) OVERCURRENT PROTECTION INPUT-OUTPUT ISOLATION INPUT-CASE OUTPUT-CASE OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE ENVIRONMENT VIBRATION IMPACT SAFETY AGENCY APPROVALS CASE SIZE/WEIGHT OTHERS COOLING METHOD PROTECTION CIRCUIT AND OTHERS *1 *2 *3 *4 * SUCW1R50512 DC4.5 - 9 0.446typ 70typ t12(+24) SUCW1R50515 SUCW1R51212 DC9 - 18 0.429typ 0.178typ 70typ 73typ t15(+30) t12(+24) 0.065 0.05 0.065 60max 75max 60max 600max 750max 600max 120max 120max 120max 150max 150max 150max 150max 150max 150max 200max 200max 200max 150max 180max 150max 240max 290max 240max 50max 60max 50max 20max (Minimum input, Io=100%) Fixed (TRM pin open) t5% adjustable 0.065 60max 600max 120max 150max 150max 200max 150max 240max 50max by external VR 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 Works over 105% of rating and recovers automatically AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) -40 to +85C, 20 - 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis UL60950-1, C-UL, EN60950-1 22.4X7.0X13.2mm (WXHXD) / 3g max Convection/Forced air Output pins can be connected in series to make a 24V/30V output. Rated input 5V, 12V, 24V or 48V DC Io=100% Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. Parallel operation with other model is not possible. G-28 0.065 60max 600max 120max 150max 150max 200max 150max 240max 50max 0.043typ 73typ t15(+30) 0.05 75max 750max 120max 150max 150max 200max 180max 290max 60max SUCW1R5 External view Recommended Pad and Hole dia. (TOP VIEW) Adsorption area Model type B -Vin 7.62 0.2 12.7 13.2 7.62 0.2 COM TRM 0.6 0.1 -Vout +0.5 2.54 -0.25 2.54 0.2 0.70.4 3.2 Part A 0.1min 22.4 Closeup of part A 1.9 +Vout 1.3 +Vin 1.4 2.54 0.2 1. SMD(type B) Component area 2 3.2 25.22 type C 2.54 -0.25 +0.5 1.6 (0-1 1.80.3 0.8 min 0) 7 Pin terminal part details 6-0.9 1 23.62 0.6 Component area Model 2.540.2 2. DIP(type C) Unit : 0.1inch Dimension : mm Coplanarity within 0.1 +Vout +Vin -Vin 7.620.2 12.7 13.2 TRM 22.4 0.1min Closeup of part A +0.5 7 2.44 -0.25 3.680.25 Part A +0.5 0.60.1 -Vout 2.44 -0.25 2.54 0.2 7.62 0.2 COM Tolerance 0.5 Dimensions in mm Pin terminal thickness : 0.30.1 Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.20.05 Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Mass 3g less 1 20.32 G-29 SU.SUC Ordering information On-board type SUCW3 SUC W 1 2 3 3 12 12 4 5 B 6 P 7 -O 8 1Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP 7Packing form Blank:Plastic cover P :Tray (SMD type) 8Optional G :Capacitor between Input and Output is removed. R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT SUCW30512 3.12 VOLTAGE[V] *1 t12 or +24 CURRENT[A] 0.13 SUCW30515 3 t15 or +30 0.1 SUCW31212 3.12 t12 or +24 0.13 SUCW31215 3 t15 or +30 0.1 SUCW32412 3.12 t12 or +24 0.13 SUCW32415 3 t15 or +30 0.1 SUCW34812 3.12 t12 or +24 0.13 SUCW34815 3 t15 or +30 0.1 SUCW31215 SUCW32412 DC18 - 36 0.329typ 0.172typ 76typ 76typ t15(+30) t12(+24) SUCW32415 SUCW34812 DC36 - 76 0.165typ 0.086typ 76typ 76typ t15(+30) t12(+24) SUCW34815 0.1 75max 750max 120max 150max 150max 200max 180max 290max 60max 0.1 75max 750max 120max 150max 150max 200max 180max 290max 60max SPECIFICATIONS INPUT SU.SUC OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 * MODEL VOLTAGE[V] *2 CURRENT[A] *2 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] -20 to +55C *3 RIPPLE[mVp-p] -40 to -20C *3 -20 to +55C *3 RIPPLE NOISE[mVp-p] -40 to -20C *3 -20 to +55C TEMPERATURE REGULATION[mV] -40 to +55C *4 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING[V] (t5%) OVERCURRENT PROTECTION REMOTE ON/OFF INPUT-OUTPUT INPUT-CASE OUTPUT-CASE OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD SUCW30512 DC4.5 - 9 0.844typ 74typ t12(+24) SUCW30515 SUCW31212 DC9 - 18 0.811typ 0.343typ 74typ 76typ t15(+30) t12(+24) 0.13 0.1 0.13 60max 75max 60max 600max 750max 600max 120max 120max 120max 150max 150max 150max 150max 150max 150max 200max 200max 200max 150max 180max 150max 240max 290max 240max 50max 60max 50max 20max (Minimum input, Io=100%) Fixed (TRM pin open) t5% adjustable 0.13 60max 600max 120max 150max 150max 200max 150max 240max 50max by external VR 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 Works over 105% of rating and recovers automatically Provided (Negative logic L : ON, H : OFF) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) -40 to +85C, 20 - 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis UL60950-1, C-UL, EN60950-1 25X7.0X16.1mm (WXHXD) / 5g max Convection/Forced air Output pins can be connected in series to make a 24V/30V output. Rated input 5V, 12V, 24V or 48V DC Io=100% Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. Parallel operation with other model is not possible. G-30 0.13 60max 600max 120max 150max 150max 200max 150max 240max 50max 0.083typ 76typ t15(+30) 0.1 75max 750max 120max 150max 150max 200max 180max 290max 60max SUCW3 External view Model COM TRM RC -Vout 3.94+0.5 -0.25 +0.5 3.94-0.25 Model Component area 2.54 0.2 2.540.2 Part A 0.1min SU.SUC 1.3 +0.5 25 Tolerance 0.5 Dimensions in mm Pin terminal thickness : 0.30.1 Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.20.05 Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Mass 5g less 3.84 -0.25 -Vout 15.5 16.1 Closeup of part A +0.5 3.84 -0.25 7.62 0.2 TRM -Vin 7.62 0.2 +Vout RC 1.6 Unit : 0.1inch Dimension : mm COM 2.54 0.2 0.6 0.1 3.2 type C 7-0.9 +Vin 7 2 27.76 Closeup of part A 2.DIP(type C) 3.68 0.25 2.54 0.2 15.5 16.1 Coplanarity within 0.1 3.2 0.1min 1 1.27 26.16 0.6 (0-1 1.8 0.3 0) Pin terminal part details Part A 25 7 0.8min 0.7 0.4 2.54 0.2 0.6 0.1 7.62 0.2 -Vin 7.62 0.2 +Vin Recommended Pad and Hole dia. (TOP VIEW) type B Component area 1.9 +Vout 1.4 Adsorption area 2.54 0.2 1.SMD(type B) 1 1.27 22.86 G-31 Ordering information On-board type SUCW6 SUC W 1 2 6 3 12 12 4 5 B 6 P 7 -O 8 1Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP 7Packing form Blank:Plastic cover P :Tray (SMD type) 8Optional G :Capacitor between Input and Output is removed. R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT SUCW60512 6 VOLTAGE[V] *1 t12 or +24 CURRENT[A] 0.25 SUCW60515 6 t15 or +30 0.2 SUCW61212 6 t12 or +24 0.25 SUCW61215 6 t15 or +30 0.2 SUCW62412 6 t12 or +24 0.25 SUCW62415 6 t15 or +30 0.2 SUCW64812 6 t12 or +24 0.25 SUCW64815 6 t15 or +30 0.2 SUCW61215 SUCW62412 DC18 - 36 0.588typ 0.291typ 85typ 86typ t15(+30) t12(+24) SUCW62415 SUCW64812 DC36 - 76 0.291typ 0.145typ 86typ 86typ t15(+30) t12(+24) SUCW64815 0.2 75max 750max 120max 150max 150max 200max 180max 290max 60max 0.2 75max 750max 120max 150max 150max 200max 180max 290max 60max SPECIFICATIONS INPUT SU.SUC OUTPUT MODEL VOLTAGE[V] *2 CURRENT[A] *2 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] -20 to +55C *3 RIPPLE[mVp-p] -40 to -20C *3 -20 to +55C *3 RIPPLE NOISE[mVp-p] -40 to -20C *3 -20 to +55C TEMPERATURE REGULATION[mV] -40 to +55C *4 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING[V] (t5%) SUCW60512 DC4.5 - 9 1.538typ 78typ t12(+24) SUCW60515 SUCW61212 DC9 - 18 1.538typ 0.588typ 78typ 85typ t15(+30) t12(+24) 0.25 0.2 0.25 60max 75max 60max 600max 750max 600max 120max 120max 120max 150max 150max 150max 150max 150max 150max 200max 200max 200max 150max 180max 150max 240max 290max 240max 50max 60max 50max 20max (Minimum input, Io=100%) Fixed (TRM pin open) t5% adjustable 0.25 60max 600max 120max 150max 150max 200max 150max 240max 50max 0.25 60max 600max 120max 150max 150max 200max 150max 240max 50max 0.145typ 86typ t15(+30) 0.2 75max 750max 120max 150max 150max 200max 180max 290max 60max by external VR 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT AND REMOTE ON/OFF Provided (Negative logic L : ON, H : OFF) OTHERS INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) ISOLATION INPUT-CASE OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 SAFETY CASE SIZE/WEIGHT 32.6X7.0X19.1mm (WXHXD) / 7g max OTHERS COOLING METHOD Convection/Forced air *1 *2 *3 *4 * Output pins can be connected in series to make a 24V/30V output. Rated input 5V, 12V, 24V or 48V DC Io=100% Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. Parallel operation with other model is not possible. G-32 SUCW6 External view Recommended Pad and Hole dia. (TOP VIEW) type B Adsorption area 1.SMD(type B) Model +Vin -Vin 32.6 3.2 7-0.9 Model +Vin 2.540.2 3.1 5.080.2 12.70.2 +Vout 19.1 12.70.2 COM TRM 3.680.25 -Vout Tolerance 0.5 Dimensions in mm Pin terminal thickness : 0.30.1 Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.20.05 Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Mass 7g less SU.SUC Part A 0.1min 32.6 7 Closeup of part A 2.2 2.2 3.1 2.54 0.2 0.6 0.1 RC -Vin 1.6 Unit : 0.1inch Dimension : mm Coplanarity within 0.1 2.DIP(type C) 1.9 0.1min Closeup of part A 2.2 1 23 33.780.6 3.2 type C 3.2 0) (0-1 2.2 2 35.38 Part A 7 0.1min Pin terminal part details 1.80.3 -Vout 0.70.4 2.540.2 RC 0.6 0.1 TRM 1.3 19.1 12.7 0.2 COM 1.4 3.2 5.080.2 2.540.2 12.70.2 +Vout 1 23 30.48 G-33 Ordering information On-board type SUCW10 SUC W 10 12 12 1 2 3 4 5 B 6 P 7 -O 8 1Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP 7Packing form Blank:Plastic cover P :Tray(SMD type) 8Optional G :Capacitor between Input and Output is removed. R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT SUCW100512 10.8 VOLTAGE[V] *1 t12 or +24 CURRENT[A] 0.45 SUCW100515 10.5 t15 or +30 0.35 SUCW101212 10.8 t12 or +24 0.45 SUCW101215 10.5 t15 or +30 0.35 SUCW102412 10.8 t12 or +24 0.45 SUCW102415 10.5 t15 or +30 0.35 SUCW104812 10.8 t12 or +24 0.45 SUCW104815 10.5 t15 or +30 0.35 SUCW101215 SUCW102412 DC18 - 36 1.02typ 0.523typ 86typ 86typ t15(+30) t12(+24) SUCW102415 SUCW104812 DC36 - 76 0.509typ 0.262typ 86typ 86typ t15(+30) t12(+24) SUCW104815 0.35 75max 750max 120max 150max 150max 200max 180max 290max 60max 0.35 75max 750max 120max 150max 150max 200max 180max 290max 60max SPECIFICATIONS INPUT SU.SUC OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY OTHERS *1 *2 *3 *4 * MODEL VOLTAGE[V] *2 CURRENT[A] *2 EFFICIENCY[%] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] -20 to +55C *3 RIPPLE[mVp-p] -40 to -20C *3 -20 to +55C *3 RIPPLE NOISE[mVp-p] -40 to -20C *3 -20 to +55C TEMPERATURE REGULATION[mV] -40 to +55C *4 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING[V] (t5%) OVERCURRENT PROTECTION REMOTE ON/OFF INPUT-OUTPUT INPUT-CASE OUTPUT-CASE OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD SUCW100512 DC4.5 - 9 2.51typ 86typ t12(+24) SUCW100515 SUCW101212 DC9 - 18 2.44typ 1.05typ 86typ 86typ t15(+30) t12(+24) 0.45 0.35 0.45 60max 75max 60max 600max 750max 600max 120max 120max 120max 150max 150max 150max 150max 150max 150max 200max 200max 200max 150max 180max 150max 240max 290max 240max 50max 60max 50max 20max (Minimum input, Io=100%) Fixed (TRM pin open) t5% adjustable 0.45 60max 600max 120max 150max 150max 200max 150max 240max 50max by external VR 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 11.40 - 12.60 14.25 - 15.75 Works over 105% of rating and recovers automatically Provided (Negative logic L : ON, H : OFF) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) -40 to +85C, 20 - 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis UL60950-1, C-UL, EN60950-1 40.2X7.0X22.0mm (WXHXD) / 10g max Convection/Forced air Output pins can be connected in series to make a 24V/30V output. Rated input 5V, 12V, 24V or 48V DC Io=100% Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. Parallel operation with other model is not possible. G-34 0.45 60max 600max 120max 150max 150max 200max 150max 240max 50max 0.254typ 86typ t15(+30) 0.35 75max 750max 120max 150max 150max 200max 180max 290max 60max SUCW10 External view Recommended Pad and Hole dia. (TOP VIEW) Adsorption area 1.SMD(type B) type B Model 2.54 0.2 2.2 (0-1 1.27 30.6 41.4 0.6 0.1min Coplanarity within 0.1 2.DIP(type C) Model +Vin 3.28 7.620.2 2.540.2 15.240.2 +Vout 22 15.240.2 COM TRM 2.54 0.2 0.6 0.1 -Vout 1.6 Unit : 0.1inch Dimension : mm Tolerance 0.5 Dimensions in mm Pin terminal thickness : 0.30.1 Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.20.05 Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Mass 10g less Part A 0.1min 40.2 7 Closeup of part A 2.2 2.2 1 3.28 3.680.25 type C 7-0.9 RC -Vin 3.2 Closeup of part A 2.2 1 Part A 2 43 3.38 0) 1.80.3 40.2 7 0.1min Pin terminal part details 0.70.4 -Vout RC -Vin 3.2 1.9 0.60.1 TRM 1.3 22 15.240.2 COM 1.4 3.38 7.620.2 2.540.2 15.240.2 +Vout +Vin 1.27 30.6 38.1 G-35 SU.SUC