SPECIFICATION CONTROL DRAWING
TE Connectivity
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
TITLE:
SOLDERSLEEVE TERMINATOR WITH
PRE-INSTALLED LEAD
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
DOCUMENT NO.:
B-155-XX - 35- GA- C L
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
PROD. REV.:
SEE TABLE
DOC. ISSUE:
2
DATE:
16-Apr-11
PREPARED BY:
mforonda
DCR NUMBER:
D050222
REPLACES:
---
CAGE CODE :
06090
SCALE:
---
SIZE:
A
SHEET:
1 of 1
Print Date: 9-May-11 © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
1Product Revision Product Dimensions Cable Dimensions
2Product
Name øA
min
øB
min
L
max
øD
max
øE
min
øF
min
øG
max J
Qty:
Item 2
B-155-03-35-GA-CL --- 2.50
[0.098]
3.00
[0.118]
24.50
[0.965]
3.00
[0.118]
1.50
[0.059]
1.00
[0.040]
2.50
[0.098]
7.00±0.50
[0.276±0.020] 1
B-155-05-35-GA-CL --- 4.30
[0.169]
4.80
[0.189]
29.30
[1.154]
4.80
[0.189]
2.00
[0.079]
1.50
[0.059]
4.30
[0.169]
9.00±0.50
[0.354±0.020] 1
B-155-06-35-GA-CL --- 6.00
[0.236]
6.70
[0.264]
32.00
[1.260]
6.70
[0.264]
3.30
[0.130]
2.80
[0.110]
6.00
[0.236]
10.00± 0.50
[0.394±0.020] 1
B-155-07-35-GA-CL --- 6.40
[0.252]
7.30
[0.287]
32.50
[1.280]
7.30
[0.287]
3.30
[0.130]
2.80
[0.110]
6.40
[0.252]
11.00±1.00
[0.433±0.040] 1
B-155-09-35-GA-CL --- 8.70
[0.343]
9.20
[0.362]
35.50
[1.398]
9.20
[0.362]
4.50
[0.177]
4.00
[0.157]
8.70
[0.343]
12.00± 1.00
[0.472±0.040] 2
B-155-11-35-GA-CL --- 10.00
[0.394]
11.50
[0.453]
35.50
[1.398]
11.50
[0.453]
4.50
[0.177]
4.00
[0.157]
10.00
[0.394]
13.00±1.00
[0.512±0.040] 2
B-155-13-35-GA-CL --- 13.00
[0.512]
15.00
[0.591]
45.50
[1.791]
15.10
[0.594]
7.00
[0.276]
6.50
[0.256]
13.00
[0.512]
17.00±1.00
[0.669±0.040] 3
1Consult TE Connectivity for individual product revision. Contains more than 1 part name.
MATERIALS
1. INSULATION SLEEVE: Transparent heat-shrinkable radiation cross-linked modified polyolefin.
2. SOLDER PREFORMS WITH FLUX: Qty: see table (one solder washer shown).
SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006.
FLUX: TYPE ROM1 per ANSI / J-STD-004.
3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic.
4. GROUND LEAD: Raychem cross-linked polyolefin-insulated wire, stranded tin-plated copper. Consult TE Connectivity for
sizes and colors other than listed below.
2Part no. callout shall be replaced with;
GA = wire size “AWG”; AWG 22 available.
CL = Lead color designation per MIL-STD-681. Available color: green (5); white (9).
APPLICATION
1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an
insulation rated for at least +85C, meeting the dimensional criteria listed in the table above.
2. Temperature range: -55C to +125C.
3. When installed properly, these devices will meet the requirements of TE Connectivity/Raychem Specification RT-1404.
4. For installation procedure and application equipment, consult TE Connectivity /Raychem RPIP 824-00.
For best results, prepare
the cable as shown:
