Model 31 Low Low Range Precision Miniature Load Cell DESCRIPTION Model 31 low range precision miniature load cells measure term stability for ranges 1000 grams and above.) A modification both tension and compression load forces of 50 grams to 500 permits this model to be completely welded for underwater g. These models are our highest accuracy, rugged miniature applications. The Model 31 tension/compression load cell has load cells. Model 31's welded, stainless steel construction is male threads attachments. High accuracies of 0.15 % to 0.25 % designed to eliminate or reduce to a minimum, the effects of full scale are achieved. Each bonded strain gage unit is built of off-axis loads. (The internal construction assures excellent long- welded 17-4 PH stainless steel for additional ruggedness. FEATURES * 50 g to 500 g * mV/V output * Stainless steel * Miniature design * Double diaphragm construction Model 31 Low PERFORMANCE SPECIFICATIONS RANGE CODES Characteristic Measure Range Codes Range Load ranges 50 g, 150 g, 250 g, 500 g AJ 50 g Linearity 0.15 % full scale AL 150 g Hysteresis 0.15 % full scale AN 250 g Non-repeatability 0.1 % full scale AP 500 g Tolerance on output 50 g to 150 g 0,1 mV/V max. Tolerance on output 250 g to 500 g 20 mV/V Operation Tension/compression Resolution Infinite 5 OPTION CODES Many range/option combinations are available in our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/ TMsensor-ship for updated listings. 3 ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -53 C to 121 C [-65 F to 250 F] Temperature, compensated 15 C to 71 C [60 F to 160 F] Storage temperature -73 C to 148 C [-100 F to 300 F] Temperature effect, zero 0.015 % full scale/F Temperature effect, span 0.015 % full scale/F Load range 50, 150, 250, 500 g Temperature compensation 1a. 60 F to 160 F 1b. 30 F to 130 F 1c. 0 F to 185 F 1d. -20 F to 130 F Internal amplifiers 2u. Unamplified, mV/V output Overload stops 4a. Overload stop Electrical termination 6d. Microtec DR-4S-4H 4-pin 6e. Integral cable: Teflon 6f. Integral cable: PVC 6h. Integral cable: Silicone Special calibration 30a. Compression only calibration, positive in compression 30b. Tension and compression calibration, positive in tension 30c. Compression only calibration, negative in compression Shock and vibration 44a. Shock and vibration resistance Interfaces 4 53e. Signature calibration6 53t. TEDS IEEE 1451.4 module ELECTRICAL SPECIFICATIONS Characteristic Measure Strain gage type Semiconductor Excitation (calibration) 5 Vdc Insulation resistance 5000 Mohm @ 50 Vdc Bridge resistance 500 ohm Zero balance 1 % max. Electrical termination (std) Teflon cable (5 ft) MECHANICAL SPECIFICATIONS Characteristic Measure Maximum allowable load 5 lb1 Weight 90 g Material 17-4 PH stainless steel Deflection full scale 0,020 mm [0.0008 in] Natural frequency 740 Hz MOUNTING DIMENSIONS WIRING CODES Cable Red (+) excitation Black (-) excitation Green (-) output White (+) output 6-32 UNC base thread 2 Honeywell * Sensing and Control 1e. -20 F to 200 F 1j. 0 F to 50 C 1k. -20 C to 85 C 1m. -25 C to 110 C 6i. Integral underwater cable (max. 82 C [180 F]) 6v. Phoenix connector on end of cable 15d. Connector on end of cable Model 31 Low Low Range Precision Miniature Load Cell NOTES Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. 1. 2. 3. 4. 5. 6. Allowable maximum loads - maximum load to be applied without damage. 2 Without damage - loading to this level will not cause excessive zero shift or performance degradation. The user must consider fatigue life or long term use and structural integrity. All structurally critical applications (overhead loading, etc.) should always be designed with safety redundant load paths. Standard calibration for tension/compression load cells is in tension only. TEDS available with integral cable units only. This unit calibrated to Imperial (non-Metric) units. Signature calibration only available as inline module. TYPICAL SYSTEM DIAGRAM While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to info.sc@honeywell.com WARNING PERSONAL INJURY * DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION * The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008629-1-EN IL50 GLO May 2008 Copyright (c) 2008 Honeywell International Inc. All rights reserved. Model 31 Mid Mid Range Precision Miniature Load Cell DESCRIPTION Model 31 mid range precision miniature load cells measure both The Model 31 tension/compression load cell has male threads tension and compression load forces of 1000 g to 1000 lb. These attachments. High accuracies of 0.15 % to 0.25 % full scale are models are our highest accuracy, rugged miniature load cells. achieved. Each bonded strain gage unit is built of welded 17-4 Model 31's welded, stainless steel construction is designed to PH stainless steel for additional ruggedness. All load cells with eliminate or reduce to a minimum, the effects of off-axis loads. ranges from 1 kg to 10 lb have an electrical balance module in (The internal construction assures excellent long-term stability the lead wire (approximately 1 in x .087 in thick). This balance for ranges 1000 grams and above.) A modification permits this module does not have to be the same temperature as the model to be completely welded for underwater applications. transducer. FEATURES * 1000 g to 1000 lb * mV/V output * Stainless steel * Miniature design Model 31 Mid PERFORMANCE SPECIFICATIONS RANGE CODES Characteristic Measure Range codes Range Load ranges 1000 g, 5 lb, 10 lb, 25 lb, 50 lb, 100 lb, 250 lb, 500 lb, 1000 lb AR 1000 g Linearity 1000 g to 250 lb 0.15 % full scale AT 5 lb Linearity 500 lb to 1000 lb 0.2 % full scale AV 10 lb Hysteresis 1000 g to 250 lb 0.15 % full scale BL 25 lb Hysteresis 500 lb to 1000 lb 0.2 % full scale BN 50 lb Non-repeatability 1000 g 0.1 % full scale BR 100 lb Non-repeatability 5 lb to 1000 lb 0.05 % full scale CN 250 lb 1.5 mV/V (nominal) CR 500 lb Tolerance on output 1000 g Tolerance on output 5 lb to 1000 lb CV 1000 lb 2 mV/V Operation Tension/compression 3 Resolution Infinite 6 WIRING CODES Cable Unamplified Red (+) excitation Black (-) excitation Measure Green (-) output Temperature, operating -53 C to 121 C [-65 F to 250 F] White (+) output Temperature, compensated 15 C to 71 C [60 F to 160 F] Storage temperature -73 C to 148 C [-100 F to 300 F] Temperature effect, zero 0.005 % full scale/F Temperature effect, span 0.005 % full scale/F ENVIRONMENTAL SPECIFICATIONS Characteristic ELECTRICAL SPECIFICATIONS Characteristic Measure Strain gage type Bonded foil Excitation (calibration) 1 kg to 10 lb 5 Vdc Excitation (calibration) 25 lb to 1000 lb 10 Vdc Insulation resistance 5000 Mohm @ 50 Vdc Bridge resistance 350 ohm Zero balance 1 % max. Electrical termination (std) Teflon cable (1524 mm [60 in]) MECHANICAL SPECIFICATIONS Characteristic Measure Maximum allowable load 150 % FS1 Weight See table Material 17-4 PH stainless steel Deflection full scale See table Natural frequency See table 2 Honeywell * Sensing and Control DEFLECTIONS AND RINGING FREQUENCIES Capacity (lb) Deflection at full scale (in) Ringing frequency (Hz) Weight (g) 1000 g to 10 lb 0,03 mm [0.001 in] 3000 Hz 21 g 25 lb to 100 lb 0,03 mm [0.001 in] 10000 Hz 63 g 250 lb to 1000 lb 0,04 mm [0.0015 in] 12000 Hz 80 g Mid Range Precision Miniature Load Cell MOUNTING DIMENSIONS Ranges (lb) T H C F A B 1000 g, 5 lb, 10 lb #6-32 UNC 11,43 mm [0.45 in] 6,35 mm [0.25 in] 1,27 mm [0.05 in] 7,87 mm [0.31 in] 4,83 mm [0.19 in] 25 lb, 50 lb, 100 lb #10-32 UNF 13,21 mm [0.52 in] 6,35 mm [0.25 in] 0,76 mm [0.03 in] 12,7 mm [0.50 in] 6,35 mm [0.25 in] 250 lb, 500 lb, 1000 lb 1/4-28 UNF 13,21 mm [0.52 in] 9,65 mm [0.38 in] 0,76 mm [0.03 in] 12,7 mm [0.50 in] 6,35 mm [0.25 in] OPTION CODES Many range/option combinations are available in our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell. com/TMsensor-ship for updated listings. Load range 1000 g, 5 lb, 10 lb, 25 lb, 50 lb, 100 lb, 250 lb, 500 lb, 1000 lb Temperature compensation 1a. 60 F to 160 F 1b. 30 F to 130 F 1c. 0 F to 185 F 1d. -20 F to 130 F 1e. -20 F to 200 F 1f. 70 F to 250 F Internal amplifiers 2u. Unamplified, mV/V output Overload stops 4a. Overload stops Electrical termination 6a. Bendix PTIH-10-6P - 6 pin (max. 250 F)5 6d. Microtec DR-4S-4H 4 pin 6e. Integral cable: Teflon 6f. Integral cable: PVC Special calibration 9a. 10 point (5 up/5 down) 20 % increments @ 20 C 9b. 20 point (10 up/10 down) 10 % increments @ 20 C Special calibration 30a. Compression only calibration, positive in compression 30b. Tension and compression calibration, positive in tension 30c. Compression only calibration, negative in compression Shock and vibration 44a. Shock and vibration resistance Interfaces4 53e. Signature calibration7 53t. TEDS IEEE 1451.4 module 1g. 70 F to 325 F 1h. 70 F to 400 F 1i. -65 F to 250 F 1j. 0 C to 50 C 1k. -20 C to 85 C 1m. -25 to 110 C 6h. Integral cable: Silicone 6i. Integral underwater cable (max. 180 F) 6v. Phoenix connector on end of cable 15d. Connector on end of cable Honeywell * Sensing and Control 3 Model 31 Mid Mid Range Precision Miniature Load Cell NOTES Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. 1. 2. 3. 4. 5. 6. 7. Allowable maximum loads - maximum load to be applied without damage. 2 Without damage - loading to this level will not cause excessive zero shift or performance degradation. The user must consider fatigue life for long term use and structural integrity. All structurally critical applications (overhead loading, etc.) should always be designed with safety redundant load paths. Standard calibration for tension/compression load cells is in tension only. TEDS available with integral cable units only. Availability varies with range. This unit calibrated to Imperial (non-Metric) units. Signature calibration only available as inline module. TYPICAL SYSTEM DIAGRAM While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to info.sc@honeywell.com WARNING PERSONAL INJURY * DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION * The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008630-1-EN IL50 GLO May 2008 Copyright (c) 2008 Honeywell International Inc. All rights reserved. Model 31 High High Range Precision Miniature Load Cell DESCRIPTION Model 31 high range precision miniature load cells measure term stability for ranges 1000 grams and above.) A modification both tension and compression load forces of 2000 lb to 10000 permits this model to be completely welded for underwater lb. These models are our highest accuracy, rugged miniature applications. The Model 31 tension/compression load cell has load cells. Model 31's welded, stainless steel construction is male threads attachments. High accuracies of 0.15 % to 0.25 % designed to eliminate or reduce to a minimum, the effects of full scale are achieved. Each bonded strain gage unit is built of off-axis loads. (The internal construction assures excellent long- welded 17-4 PH stainless steel for additional ruggedness. FEATURES * 2000 lb to 10000 lb * mV/V output * Stainless steel * Miniature design * Stabilized column construction Model 31 High PERFORMANCE SPECIFICATIONS RANGE CODES Characteristic Measure Range codes Range Load ranges 2000 lb to 10000 lb DL 2000 lb Linearity 0.2 % full scale DN 3000 lb Hysteresis 0.2 % full scale DP 4000 lb Non-repeatability 0.05 % full scale DR 5000 lb Tolerance on output 2 mV/V DT 7500 lb Operation Tension/compression 3 Infinite DV 10000 lb Resolution 5 ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -53 C to 121 C [-65 F to 250 F] Temperature, compensated 15 C to 71 C [60 F to 160 F] Storage temperature -73 C to 148 C [-100 F to 300 F] Temperature effect, zero 0.005 % full scale/F Temperature effect, span 0.005 % full scale/F ELECTRICAL SPECIFICATIONS Characteristic Measure Strain gage type Bonded foil Excitation (calibration) 5 Vdc Insulation resistance 5000 Mohm @ 50 Vdc Bridge resistance 350 ohm Zero balance 1 % max. Electrical termination (std) Teflon cable (1524 mm [60 in]) MECHANICAL SPECIFICATIONS Characteristic Measure Maximum allowable load 150 % FS1 Weight See table Material 17-4 PH stainless steel Deflection full scale See table Natural frequency See table WIRING CODES Cable Unamplified Red (+) excitation Black (-) excitation Green (-) output White (+) output 2 Honeywell * Sensing and Control DEFLECTIONS AND RINGING FREQUENCIES Capacity (lb) Deflection at full scale Ringing frequency Weight 2000 lb, 3000 lb 0.03 mm [0.001 in] 26000 Hz 60 g 4000 lb, 5000 lb 0.04 mm [0.0015 in] 21000 Hz 125 g 7500 lb, 10000 lb 0.04 mm [0.0015 in] 17000 Hz 250 g High Range Precision Miniature Load Cell MOUNTING DIMENSIONS Ranges (lb) T OD C H 2000 lb, 3000 lb 3/8-24 UNF 25,4 mm [1.00 in] 12,7 mm [0.50 in] 18,29 mm [0.72 in] 4000 lb, 5000 lb 1/2-20 UNF 31,75 mm [1.25 in] 16 mm [0.63 in] 23,88 mm [0.94 in] 7500 lb, 10000 lb 3/4-16 UNF 35,05 mm [1.38 in] 22,35 mm [0.88 in] 27,94 mm [1.10 in] OPTION CODES Many range/option combinations are available in our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell. com/TMsensor-ship for updated listings. Load range 2000 lb, 3000 lb, 4000 lb, 5000 lb, 7500 lb, 10000 lb Temperature compensation 1a. 60 F to 160 F 1b. 30 F to 130 F 1c. 0 F to 185 F 1d. -20 F to 130 F 1e. -20 F to 200 F 1f. 70 F to 250 F Internal amplifiers 2u. Unamplified, mV/V output Electrical termination 6e. Integral cable: Teflon 6d. Microtec DR-4S-4H 4 pin 6f. Integral cable: PVC 6g. Integral cable: Neoprene (max. 180 F) Bridge resistance 12a. 1000 ohm (foil) 12b. 5000 ohm (foil) Electrical connector orientation 15a. Horizontal electrical exit port orientation 15b. Vertical electrical exit port orientation 15c. Radial electrical exit port orientation 15d. Connector on end of cable Special calibration 30a. Compression only calibration, positive in compression 30b. Tension and compression calibration, positive in tension 30c. Compression only calibration, negative in compression 30d. Tension and compression calibration, positive in compression Shock and vibration 44a. Shock and vibration resistance Interfaces 53e. Signature calibration6 53t. TEDS IEEE 1451.4 module4 1g. 70 F to 325 F 1h. 70 F to 400 F 1i. -65 F to 250 F 1j. 0 C to 50 C 1k. -20 C to 85 C 1m. -25 to 110 C 6h. Integral cable: Silicone 6i. Integral underwater cable (max. 180 F) 6v. Phoenix connector on end of cable Honeywell * Sensing and Control 3 Model 31 High High Range Precision Miniature Load Cell NOTES 1. 2. 3. 4. 5. 6. Allowable maximum loads - maximum load to be applied without damage. 2 Without damage - loading to this level will not cause excessive zero shift or performance degradation. The user must consider fatigue life for long term use and structural integrity. All structurally critical applications (overhead loading, etc.) should always be designed with safety redundant load paths. Standard calibration for tension/compression load cells is in tension only. TEDS available with integral cable units only. This unit calibrated to Imperial (non-Metric) units. Signature calibration only available as inline module. TYPICAL SYSTEM DIAGRAM Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to info.sc@honeywell.com WARNING PERSONAL INJURY * DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION * The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008631-1-EN IL50 GLO May 2008 Copyright (c) 2008 Honeywell International Inc. All rights reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Honeywell: 060-1432-07 060-1430-04 060-1430-05 060-1432-04 060-1432-08 060-1430-06 060-1426-04 060-1426-02