Panasonic To No. A767-040403M-01 Date 3rd Apr. '04 Type No. PRDA2 Data Sheet PCS1900 Rx SAW Filter Application : Rx Filter for PCS1900 Center Frequency : 1960MHz Size : 2.0x1.4mm, 5pin-layout Impedance : 50-50ohms unbalance-unbalance Part No. : EFCH1960TCD1 Issued Check A.Tsunekawa K,Nishimura CIRCUIT COMPONENTS BUSINESS UNIT MATSUSHITA ELECTRONIC COMPONENTS CO.,LTD KADOMA, OSAKA, JAPAN 2004.1.6 PCS1900 Rx SAW Filter ----- Unbalanced input and unbalanced output ----Part No. : Design No. : T1960T5D2 Parameter Frequency Your request Min. Typ. Unit Our Specification Max. Min. Passband Typ. Max. 1930 ... 1990 MHz Insertion loss 1930 ... 1990MHz 1.7 2.8 dB Ripple in passband 1930 ... 1990MHz 0.6 1.7 dB Attenuation VSWR Att1 DC ... 1830MHz 29 36 dB Att2 1830... 1910MHz 13 16 dB Att3 2010 ... 2070MHz 13 17 dB Att4 2070 ... 2500MHz 26 28 dB Att5 2500 ... 4000MHz 24 28 dB Att6 4000 ... 6000MHz 20 38 dB Input 1930... 1990MHz 2.0 2.2 Output 1930 ... 1990MHz 2.0 2.2 Input impedance(Single ended) 50 Ohm Output impedance(Single ended) 50 Ohm Maximum drive level 15 dBm Maximum DC voltage 5 V ESD 50 V Operating temperature -10 +80 deg. C Storage temperature -40 +85 deg. C Panasonic 2004.1.6 PCS1900 Rx SAW Filter ----- Unbalanced input and unbalanced output ----Part No. : Design No. : T1960T5D2 Jig Loss = 0.2dB Panasonic 2004.1.6 PCS1900 Rx SAW Filter ----- Unbalanced input and unbalanced output ----Part No. : Design No. : T1960T5D2 Jig Loss = 0.2dB Panasonic THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED Tolerance : +/-0.05 Under Development BASIC DIMENSIONS UP TO 2.0 +/- 0.15 TOLERANCE INCL TO INCL TO INCL TO INCL 0.8 +/- 0.15 1.4 +/- 0.15 ABOVE 2-0.735 ISSUE 5-0.38 (2) (1) Input (2) GND (3) GND (4) Output (5) GND (3) DO NOT SCALE DRAWING (4) 0.075 (5) REVISIONS INDICATED BY DATE SCALE DRAW CHECK APPROVAL DRAWING NO. NAME 0.075 REVISIONS FINISH DESIGN 5-0.44 (1) MATERIAL Note : The design manufacturing process, and Specification of this device are subject to change without notice. ALL DIMENSIONS ARE IN MILLIMETERS TYPE NO. SAW Filter CERAMIC BUSINESS UNIT, LCR DEVICE COMPANY MATSUSHITA ELECTRONIC COMPONENTS CO.,LTD. KADOMA, OSAKA, JAPAN THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED BASIC DIMENSIONS UP TO (2) S11 (3) S22 TOLERANCE INCL TO INCL TO INCL TO INCL ABOVE (1) (5) C S (4) D 0 Level S22 S11 1 S C 2 ISSUE 3 5 4 D S : Standard Signal Generator (Output Impedance 50 ohm) C : Frequency Counter D : Detector (Input Impedance 50 ohm) MATERIAL REVISIONS FINISH DESIGN DRAW CHECK APPROVAL DRAWING NO. Fig. 2 NAME TYPE NO. SAW filter CERAMIC BUSINESS UNIT , LCR DEVICE COMPANY MATSUSHITA ELECTRONIC COMPONENTS CO.,LTD. DO NOT SCALE DRAWING REVISIONS INDICATED BY ALL DIMENSIONS ARE IN MILLIMETERS KADOMA, OSAKA, JAPAN DATE SCALE UNLESS OTHERWISE SPECIFIED THIRD ANGLE PROJECTION BASIC DIMENSIONS UP TO Recommended land pattern TOLERANCE INCL TO INCL TO INCL TO INCL ABOVE 0.255 0.255 0.810 0.270 5-0.540 5-0.480 ISSUE MATERIAL 0.735 REVISIONS FINISH DATE SCALE DESIGN 0.735 DRAW CHECK APPROVAL DRAWING NO. NAME Note : The design manufacturing process, and Specification of this device are subject to change without notice. DO NOT SCALE DRAWING REVISIONS INDICATED BY ALL DIMENSIONS ARE IN MILLIMETERS TYPE NO. SAW Filter CERAMIC BUSINESS UNIT, LCR DEVICE COMPANY MATSUSHITA ELECTRONIC COMPONENTS CO.,LTD. KADOMA, OSAKA, JAPAN