Panasonic
To No.
Date
MATSUSHITA ELECTRONIC COMPONENTS CO.,LTD
KADOMA, OSAKA, JAPAN
Issued
Check
3rd Apr. '04
Data Sheet
PCS1900 Rx SAW Filter
A
.Tsunekawa
K
,Nishimur
a
A
767-040403M-01
A
pplication : Rx Filter for PCS1900
Center Frequency : 1960MHz
Size : 2.0x1.4mm, 5pin-layout
Impedance : 50-50ohms
unbalance-unbalance
Part No. : EFCH1960TCD1
PRDA2
T
y
pe No.
CIRCUIT COMPONENTS BUSINESS UNIT
2004.1.6
PCS1900 Rx SAW Filter
----- Unbalanced input and unbalanced output -----
Part No. :
Design No. : T1960T5D2
Parameter Frequency Your request Our Specification Unit
Min. Typ. Max. Min. Typ. Max.
Passband 1930 ... 1990 MHz
Insertion loss 1930 ... 1990MHz 1.7 2.8 dB
Ripple in passband 1930 ... 1990MHz 0.6 1.7 dB
Attenuation Att1 DC ... 1830MHz 29 36 dB
Att2 1830... 1910MHz 13 16 dB
Att3 2010 ... 2070MHz 13 17 dB
Att4 2070 ... 2500MHz 26 28 dB
Att5 2500 ... 4000MHz 24 28 dB
Att6 4000 ... 6000MHz 20 38 dB
VSWR Input 1930... 1990MHz 2.0 2.2
Output 1930 ... 1990MHz 2.0 2.2
Input impedance(Single ended) 50 Ohm
Output impedance(Single ended) 50 Ohm
Maximum drive level 15 dBm
Maximum DC voltage 5V
ESD 50 V
Operating temperature -10 +80 deg. C
Storage temperature -40 +85 deg. C
Panasonic
2004.1.6
PCS1900 Rx SAW Filter
----- Unbalanced input and unbalanced output -----
Part No. :
Design No. : T1960T5D2
Jig Loss = 0.2dB
Panasonic
2004.1.6
PCS1900 Rx SAW Filter
----- Unbalanced input and unbalanced output -----
Part No. :
Design No. : T1960T5D2
Jig Loss = 0.2dB
Panasonic
DO NOT SCALE DRAWING REVISIONS INDICATED BY ∆ ALL DIMENSIONS ARE IN MILLIMETERS
UNLESS OTHERWISE SPECIFIED
BASIC DIMENSIONS TOLERANCE
UP TO INCL
TO INCL
TO INCL
TO INCL
ABOVE
THIRD ANGLE PROJECTION
NAME TYPE NO.
ISSUE REVISIONS DATE
MATERIAL FINISH SCALE
CERAMIC BUSINES S UNIT, LCR DEVICE COMPANY
MATSUSHITA ELECTRONIC COMPONENTS CO.,LTD.
KADOMA, OSAKA, JAPAN
DRAW
CHECK
APPROVAL
DESIGN
DRAWING NO.
Tolerance : +/-0.05
SAW Filter
5-0.38
5-0.44
2-0.735
0.075
0.075
(1)
(2) (3)
(4)(5)
(1) Input
(2) GND
(3) GND
(4) Output
(5) GND
0.8 +/- 0.15
Note :
The design manufacturing process,
and Specification of this device
are subject to change without
notice.
Under De vel opme nt
2.0 +/- 0.15
1.4 +/- 0.15
(1)
(2) (3)
(4)(5)
CERAMIC BUSINESS UNIT , LCR DEVICE COMPANY
MATSUSHITA ELECTRONIC COMPONENTS CO.,LTD.
KADOMA, OSAKA, JAPAN
DO NOT SCALE DRAWING REVISIONS INDICATED BY ALL DIMENSIONS ARE IN MILLIMETERS
THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED
BASIC DIMENSIONS TOLERANCE
UP TO INCL
TO INCL
TO INCL
TO INCL
A
BOVE
ISSUE REVISIONS DATE
MATERIAL FINISH SCALE
DRAW
NAME TYPE NO.
CHECK
PPROVAL
DESIGN
DRAWING NO.
SC
D
S : Standard Signal Generator
(Output Impedance 50 ohm)
C : Frequency Counter
D : Detector
(Input Impedance 50 ohm)
SAW filter
Fig. 2
S11 S22
0 Level
SC
D
S11 S22
123
45
DO NOT SCALE DRAWING REVISIONS INDICATED BY ∆ ALL DIMENSIONS ARE IN MILLIMETERS
UNLESS OTHERWISE SPECIFIED
BASIC DIMENSIONS TOLERANCE
UP TO INCL
TO INCL
TO INCL
TO INCL
ABOVE
THIRD ANGLE PROJECTION
NAME TYPE NO.
ISSUE REVISIONS DATE
MATERIAL FINISH SCALE
CERAMIC BUSINESS UNIT, LCR DEVICE COMPANY
MATSUSHITA ELECTRONIC COMPONENTS CO.,LTD.
KADOMA, OSAKA, JAPAN
DRAW
CHECK
APPROVAL
DESIGN
DRAWING NO.
Note :
The design manufacturing process, and
Specification of this device are subject to
change without notice.
SAW Filter
0.735
0.810
5-0.480
Recommended land pattern
0.735
5-0.540
0.255
0.270
0.255