SURFACE MOUNT PIN GRID ARRAYS
For Standard .100” Spacing
Male Pin Header & Female Socket
www.mill-max.com 516-922-6000
102
Series 599, 514
SPECIFY PLATING CODE XX= 91 93
Sleeve (Pin)
Contact (Clip)
200µ” Sn/Pb 200µ” Sn/Pb
10µ” Au 30µ”Au
• Series 599 SMT PGA headers and Series 514 SMT PGA sockets are
assembled with MM pin# 9976, and receptacle# 1434 respectively.
Each floats vertically within the insulator to compensate for uneven
solder paste on the PCB. Typical example illustrated.
1) “Floating” pin SMT Headers using
machined epoxy insulator.
2) Detail of “Floating” pins which
compensate for unevenly
screened solder paste.
3) PQFP device
4) Translator board
5) Existing motherboard
HEADER TYPE 9976
Ordering Information
SMT RECEPTACLE
TYPE 1434
FOR PGA MALE PIN HEADER
1. Locate footprint pattern from pages 107 to 111, the middle 8 digits of
the part number will be located under the pattern.
Determined from footprint pattern pages 107 to 111
No. of pins Grid size Pattern #
Window
599 10 476
----
Series Plating
Code
SPECIFY PLATING CODE XX= 10
Pin Plating 10µ”Au
FOR PGA FEMALE SOCKET
1. Specify 2-digit plating code from chart at bottom of page.
2. Locate footprint pattern from pages 107 to 111, the middle 8 digits of
the part number will be located under the pattern.
Determined from footprint pattern pages 107 to 111
No. of pins Grid size Pattern #
Window
514 034
----
Series Plating
Code
