BZW04-5V8 thru BZW04-376 www.vishay.com Vishay General Semiconductor TRANSZORB(R) Transient Voltage Suppressors FEATURES * Glass passivated chip junction * Available in uni-directional and bi-directional * 400 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % * Excellent clamping capability * Very fast response time * Low incremental surge resistance DO-41 (DO-204AL) * Solder dip 275 C max. 10 s, per JESD 22-B106 * AEC-Q101 qualified * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS VWM Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication. 5.8 V to 376 V VBR (uni-directional) 6.45 V to 462 V VBR (bi-directional) 6.45 V to 462 V PPPM 400 W PD 1.5 W MECHANICAL DATA Case: DO-41 (DO-204AL), molded epoxy over passivated chip IFSM (uni-directional only) 40 A TJ max. 175 C Polarity Uni-directional, bi-directional Package DO-41 (DO-204AL) DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional BZW04P-6V4B). types, use B suffix (e.g. Electrical characteristics apply in both directions. Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Note * BZW04-213(B) to BZW04-376(B) for commercial grade only Polarity: for uni-directional types the color band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS AND THERMAL CHARACTERISTICS (TA = 25 C unles otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 s waveform (1) (fig. 1) Peak pulse current with a 10/1000 s waveform (1) Power dissipation on infinite heatsink at TL = 75 C (fig. 5) Peak forward surge current, 8.3 ms single half sine-wave uni-directional only (2) Maximum instantaneous forward voltage at 25 A for uni-directional only (3) Operating junction and storage temperature range SYMBOL LIMIT UNIT PPPM 400 W IPPM See next table A PD 1.5 W IFSM 40 A VF 3.5/5.0 V TJ, TSTG -55 to +175 C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) V = 3.5 V for BZW04P(-)188 and below; V = 5.0 V for BZW04P(-)213 and above F F Revision: 16-Jan-18 Document Number: 88316 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZW04-5V8 thru BZW04-376 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PART NUMBER BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (4) (A) MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMPERATURE COEFFICIENT OF VBR (%/C) MAX. UNI-DIRECTIONAL TYPES BZW04-5V8 6.45 7.14 10.0 5.80 1000 38.0 10.5 0.057 BZW04-6V4 7.13 7.88 10.0 6.40 500 35.4 11.3 0.061 BZW04-7V0 7.79 8.61 10.0 7.02 200 33.0 12.1 0.065 BZW04-7V8 8.65 9.55 1.0 7.78 50 30.0 13.4 0.073 BZW04-8V5 9.50 10.5 1.0 8.55 10 27.6 14.5 0.075 BZW04-9V4 10.5 11.6 1.0 9.4 5.0 25.7 15.6 0.075 BZW04-10 11.4 12.6 1.0 10.2 1.0 24.0 16.7 0.078 BZW04-11 12.4 13.7 1.0 11.1 1.0 22.0 18.2 0.081 BZW04-13 14.3 15.8 1.0 12.8 1.0 19.0 21.2 0.084 BZW04-14 15.2 16.8 1.0 13.6 1.0 17.8 22.5 0.086 BZW04-15 17.1 18.9 1.0 15.3 1.0 16.0 25.2 0.088 BZW04-17 19.0 21.0 1.0 17.1 1.0 14.5 27.7 0.090 BZW04-19 20.9 23.1 1.0 18.8 1.0 13.0 30.6 0.092 BZW04-20 22.8 25.2 1.0 20.5 1.0 12.0 33.2 0.094 BZW04-23 25.7 28.4 1.0 23.1 1.0 10.7 37.5 0.096 BZW04-26 28.5 31.5 1.0 25.6 1.0 9.6 41.5 0.097 BZW04-28 31.4 34.7 1.0 28.2 1.0 8.8 45.7 0.098 BZW04-31 34.2 37.8 1.0 30.8 1.0 8.0 49.9 0.099 BZW04-33 37.1 41.0 1.0 33.3 1.0 7.4 53.9 0.100 BZW04-37 40.9 45.2 1.0 36.8 1.0 6.7 59.3 0.101 BZW04-40 44.7 49.4 1.0 40.2 1.0 6.2 64.8 0.101 BZW04-44 48.5 53.6 1.0 43.6 1.0 5.7 70.1 0.102 BZW04-48 53.2 58.8 1.0 47.8 1.0 5.2 77.0 0.103 BZW04-53 58.9 65.1 1.0 53.0 1.0 4.7 85.0 0.104 BZW04-58 64.6 71.4 1.0 58.1 1.0 4.3 92.0 0.104 BZW04-64 71.3 78.8 1.0 64.1 1.0 3.9 103 0.105 BZW04-70 77.9 86.1 1.0 70.1 1.0 3.5 113 0.105 BZW04-78 86.5 95.5 1.0 78.0 1.0 3.2 125 0.105 BZW04-85 95.0 105 1.0 85.5 1.0 2.9 137 0.106 BZW04-94 105 116 1.0 94.0 1.0 2.6 152 0.107 BZW04-102 114 126 1.0 102 1.0 2.4 165 0.107 BZW04-110 124 137 1.0 111 1.0 2.2 179 0.107 BZW04-128 143 158 1.0 128 1.0 2.0 207 0.108 BZW04-136 152 168 1.0 136 1.0 1.8 219 0.108 BZW04-145 161 179 1.0 145 1.0 1.7 234 0.108 BZW04-154 171 189 1.0 154 1.0 1.6 246 0.108 BZW04-171 190 210 1.0 171 1.0 1.5 274 0.108 BZW04-188 209 231 1.0 188 1.0 1.4 301 0.108 BZW04-213 237 263 1.0 213 1.0 1.2 344 0.110 BZW04-239 266 294 1.0 239 1.0 1.1 384 0.110 BZW04-256 285 315 1.0 256 1.0 1.0 414 0.110 BZW04-273 304 336 1.0 273 1.0 0.90 438 0.110 BZW04-299 332 368 1.0 299 1.0 0.80 482 0.110 BZW04-342 380 420 1.0 342 1.0 0.75 548 0.110 BZW04-376 418 462 1.0 376 1.0 0.67 603 0.110 Revision: 16-Jan-18 Document Number: 88316 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZW04-5V8 thru BZW04-376 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PART NUMBER BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (4) (A) MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMPERATURE COEFFICIENT OF VBR (%/C) 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.80 6.40 7.02 7.78 8.55 9.4 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53.0 58.1 64.1 70.1 78.0 85.5 94.0 102 111 128 136 145 154 171 188 213 239 256 273 299 342 376 1000 500 200 50 10 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 38.0 35.4 33.0 30.0 27.6 25.7 24.0 22.0 19.0 17.8 16.0 14.5 13.0 12.0 10.7 9.6 8.8 8.0 7.4 6.7 6.2 5.7 5.2 4.7 4.3 3.9 3.5 3.2 2.9 2.6 2.4 2.2 2.0 1.8 1.7 1.6 1.5 1.4 1.2 1.1 1.0 0.90 0.80 0.75 0.67 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.5 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103 113 125 137 152 165 179 207 219 234 246 274 301 344 384 414 438 482 548 603 0.057 0.061 0.065 0.073 0.075 0.075 0.078 0.081 0.084 0.086 0.088 0.090 0.092 0.094 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.102 0.103 0.104 0.104 0.105 0.105 0.105 0.106 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 MAX. BI-DIRECTIONAL TYPES BZW04-5V8B BZW04-6V4B BZW04-7V0B BZW04-7V8B BZW04-8V5B BZW04-9V4B BZW04-10B BZW04-11B BZW04-13B BZW04-14B BZW04-15B BZW04-17B BZW04-19B BZW04-20B BZW04-23B BZW04-26B BZW04-28B BZW04-31B BZW04-33B BZW04-37B BZW04-40B BZW04-44B BZW04-48B BZW04-53B BZW04-58B BZW04-64B BZW04-70B BZW04-78B BZW04-85B BZW04-94B BZW04-102B BZW04-110B BZW04-128B BZW04-136B BZW04-145B BZW04-154B BZW04-171B BZW04-188B BZW04-213B BZW04-239B BZW04-256B BZW04-273B BZW04-299B BZW04-342B BZW04-376B 6.45 7.13 7.79 8.65 9.50 10.5 11.4 12.4 14.3 15.2 17.1 19.0 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95.0 105 114 124 143 152 161 171 190 209 237 266 285 304 332 380 418 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21.0 23.1 25.2 28.4 31.5 34.7 37.8 41.0 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105 116 126 137 158 168 179 189 210 231 263 294 315 336 368 420 462 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 (4) For bi-directional types having V WM of 10 V and less, the ID limit is doubled Revision: 16-Jan-18 Document Number: 88316 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZW04-5V8 thru BZW04-376 www.vishay.com Vishay General Semiconductor ORDERING INFORMATION (Example) PREFERRED P/N BZW0410-E3/54 BZW0410HE3/54 (1) UNIT WEIGHT (g) 0.350 0.350 PREFERRED PACKAGE CODE 54 54 BASE QUANTITY 550 550 DELIVERY MODE 13" diameter paper tape and reel 13" diameter paper tape and reel Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 10 000 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 C CJ - Junction Capacitance (pF) PPPM - Peak Pulse Power (kW) 100 10 1 1000 Measured at Zero Bias 100 Measured at Stand-Off Voltage VWM 10 0.1 0.1 1 10 100 1000 10 000 1 100 1000 VBR - Breakdown Voltage (V) Fig. 1 - Peak Pulse Power Rating Curve Fig. 4 - Typical Junction Capacitance 100 100 75 50 25 60 Hz Resistive or Inductive Load 75 50 L = 0.375" (9.5 mm) Lead Lengths 25 0 0 0 25 50 75 100 125 150 175 0 200 Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature tr = 10 s 100 Half Value - IPP IPPM 2 50 75 100 125 150 175 200 100 TJ = 25 C Pulse Width (td) is defined as the Point where the Peak Current Decays to 50 % of IPPM Peak Value IPPM 50 Fig. 5 - Power Derating Curve TJ = TJ Max. 8.3 ms Single Half Sine-Wave Peak Forward Surge Current (A) 150 25 TL - Lead Temperature (C) TJ - Initial Temperature (C) IPPM - Peak Pulse Current, % IRSM 10 td - Pulse Width (s) PD - Power Dissipation (%) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 10/1000 s Waveform as defined by R.E.A. td 0 10 0 1.0 2.0 3.0 4.0 1 10 100 t - Time (ms) Number of Cycles at 60 Hz Fig. 3 - Pulse Waveform Fig. 6 - Max. Non-Repetitive Forward Surge Current Uni-Directional Only Revision: 16-Jan-18 Document Number: 88316 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZW04-5V8 thru BZW04-376 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-41 (DO-204AL) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.026 (0.66) 0.023 (0.58) DIA. Revision: 16-Jan-18 Document Number: 88316 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BZW04-10/54 BZW04-102/54 BZW04-102-E3/4 BZW04-102-E3/51 BZW04-102-E3/54 BZW04-102-E3/73 BZW04102HE3/54 BZW04-102HE3/73 BZW04-10-E3/51 BZW04-10-E3/54 BZW04-10-E3/73 BZW04-10HE3/54 BZW0410HE3/73 BZW04-11/54 BZW04-11B/4 BZW04-11B/54 BZW04-11B-E3/4 BZW04-11B-E3/51 BZW04-11B-E3/54 BZW04-11B-E3/73 BZW04-11BHE3/54 BZW04-11BHE3/73 BZW04-11-E3/4 BZW04-11-E3/51 BZW04-11-E3/54 BZW04-11-E3/73 BZW04-11HE3/54 BZW04-11HE3/73 BZW04-128/54 BZW04-128-E3/4 BZW04-128-E3/51 BZW04-128-E3/54 BZW04-128-E3/73 BZW04-128HE3/54 BZW04-128HE3/73 BZW04-136B/54 BZW04-136B-E3/51 BZW04-136B-E3/54 BZW04-136B-E3/73 BZW04-136BHE3/54 BZW04-136BHE3/73 BZW04-13B/4 BZW04-13B/54 BZW04-13B-E3/4 BZW04-13B-E3/51 BZW04-13B-E3/54 BZW04-13B-E3/73 BZW04-13BHE3/54 BZW0413BHE3/73 BZW04-13-E3/23 BZW04-13-E3/4 BZW04-13-E3/51 BZW04-13-E3/54 BZW04-13-E3/73 BZW0413HE3/54 BZW04-13HE3/73 BZW04-14/4 BZW04-14/54 BZW04-14-E3/4 BZW04-14-E3/51 BZW04-14-E3/54 BZW04-14-E3/73 BZW04-14HE3/54 BZW04-14HE3/73 BZW04-15/4 BZW04-15/54 BZW04-154/54 BZW04-154B/4 BZW04-154B/54 BZW04-154B-E3/4 BZW04-154B-E3/51 BZW04-154B-E3/54 BZW04-154B-E3/73 BZW04154BHE3/54 BZW04-154BHE3/73 BZW04-154-E3/51 BZW04-154-E3/54 BZW04-154-E3/73 BZW04-154HE3/54 BZW04-154HE3/73 BZW04-15B/4 BZW04-15B/54 BZW04-15B-E3/4 BZW04-15B-E3/51 BZW04-15B-E3/54 BZW04-15B-E3/73 BZW04-15BHE3/54 BZW04-15BHE3/73 BZW04-15-E3/4 BZW04-15-E3/51 BZW04-15-E3/54 BZW04-15-E3/73 BZW04-15HE3/54 BZW04-15HE3/73 BZW04-17/54 BZW04-171/23 BZW04-171/4 BZW04171B/54 BZW04-171B-E3/4 BZW04-171B-E3/51