KGZ-10 Series Oxygen Sensors DESCRIPTION The KGZ-10 is a high-accuracy, zirconia-based oxygen sensor. The ability of the sensor to operate without any reference gas makes it ideal for potential applications such as combustion control or aircraft oxygen generation systems. The sensor employs two ZrO2 discs with a small hermetically sealed chamber in between. One of the discs functions as a reversible oxygen pump, which is used to successively fill and empty the chamber. The second disc measures the ratio of the partial pressure difference and generates a corresponding sense voltage. FEATURES High-accuracy measurement Low power consumption No reference gas required Linear output signal No need for temperature stabilization Function testing and calibration in ambient air Long life A heat element produces the 700 C [1292 F]required for the ZrO2 to operate as an O2 pump. The time taken for the pump to achieve specific minimum and maximum pressures within this chamber is a measure of the partial oxygen pressure of the environment. The KGZ-10 has to be operated by an electronic measuring circuit that controls the sensor operation and signal processing. This circuit can either be incorporated into the customer s own electronics, or be purchased as a separate interface board from Honeywell. POTENTIAL APPLICATIONS Boiler combustion controls Aircraft oxygen generation systems KGZ-10 Series Table 1. Technical Specifications Characteristic Sensor voltage levels (recommended) Pump current (recommended) Heater supply, Heater supply (stand by) Pump resistance at 700 C [1292 F]: dc ac Oxygen pressure range Operational temperature Stand by temperature Sensitivity Accuracy Response time Warm up time Warm up time (from stand by) Permissible gas temperature Gas flow rate Repetitive permissible acceleration Incidental permissible acceleration 2 www.honeywell.com/sensing Parameter 45-64-85 mV 40 uA 4.0 V (1.7 A) 2.0 V 1 kOhm, typ. 1 kHz, 120 Ohm, typ. 2 mbar to 3 bar 700 C [1292 F] 500 C [932 F], typ. 1.05 ms/mbar <5 mbar <4 s <100 s <20 s -100 C/250 C [-148 F/482 F] 0 m/s to 10 m/s 5g 30 g Oxygen Sensors Figure 1. KGZ-10 Dimensions (For reference only: mm/in.) Figure 2. KGZ-10SP Dimensions (For reference only: mm/in.) Order Guide Catalog Listing Description KGZ-10 Oxygen sensor, flange mount with tabs KGZ-10SP Oxygen sensor, flange mount with pins Honeywell Sensing and Control 3 WARNING WARNING PERSONAL INJURY MISUSE OF DOCUMENTATION DO NOT USE these products as safety or emergency stop The information presented in this product sheet is for devices or in any other application where failure of the reference only. Do not use this document as a product product could result in personal injury. installation guide. Failure to comply with these instructions could result in Complete installation, operation, and maintenance death or serious injury. information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of death or serious injury. defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise SALES AND SERVICE by Honeywell in writing; please refer to your order Honeywell serves its customers through a worldwide network acknowledgement or consult your local sales office for specific of sales offices, representatives and distributors. For warranty details. If warranted goods are returned to Honeywell application assistance, current specifications, pricing or name during the period of coverage, Honeywell will repair or replace, of the nearest Authorized Distributor, contact your local sales at its option, without charge those items it finds defective. The office or: foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of E-mail: info.sc@honeywell.com merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. Internet: www.honeywell.com/sensing Phone and Fax: While we provide application assistance personally, through Asia Pacific +65 6445-3033 Fax our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the +65 6355-2828 Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax application. Latin America +1-305-805-8188 Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 www.honeywell.com/sensing 100458-3-EN IL50 GLO Printed in USA February 2011 Copyright (c) 2011 Honeywell International Inc. All rights reserved.