135
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board)
AMP
Soft Shell
Pin and Socket Connectors
5.0 mm Power Key Connectors
.197 [5.00] Centerline
Standard Density
Product Facts
■Compact design with
19.4 mm mated height
■Power circuit connector with
5.0 mm contact centerline
■Wire-to-board connectors
consisting of plug housings
for wires and PCB header
assemblies
■With a clear clicking sound,
contact insertions can be
made easier. The double
lock plate provides for
complete loading of contacts
■Locking levers are
surrounded by walls, which
protect levers and prevent
tangling with wires
■Connector is designed to
release bubbles created
by the process of potting
(PC board coating)
■Housing lances also help
prevent tangling of wired
contacts
■Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards Association,
File No. LR7189
5.0 mm Power Key
Connectors are for power
circuits of home appliances,
especially targeting gas
appliances. The connector
features four kinds of keying
per housing.
Only color-coding of hous-
ings limited the efficiency
of blind mating where you
could not see connectors.
However, the new keying
mechanism not only
improves assembly
efficiency but also helps
prevent mismating.
Part numbers involved
can be reduced so that
purchasing and stock
level control can be
made simpler.
Performance Characteristics
Voltage Rating—300 VAC1
Current Rating—10A max.2
Operating Temperature—
-30°C ~ +105˚C
Applicable Wire—24-16 AWG
Applicable PC Board Thickness—
1.6 mm
1 Excludes header tyne round
space. Usable for 150 VAC
applications when the round
dimensions are 3 mm or less.
2 Specified values vary according to
the number of contacts and the
wire used. The 10 A maximum
value applies to 16 AWG wire
used with 2 contacts.
Technical Documents
Product Specification
108-5699
Application Specification
114-5292
R
R
136
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
AMP
Soft Shell
Pin and Socket Connectors
5.0 mm Power Key Connectors
.197 [5.00] Centerline Standard Density
Quick Reference Chart for Mating Part Numbers
Applicable
No. of Pos. Double Lock Plate Mating Header Assy.
Type of Keying/Color Part Number Part Number Part Number
Type A/Natural 1376388-1 1376394-1 1376382-1
2Type B/Red 1-1376388-2 1376394-1 1-1376382-2
Type C/Blue 2-1376388-3 1376294-1 2-1376382-3
Type D/Yellow 3-1376388-4 1376394-1 3-1376382-4
Type A/Natural 1376389-1 1376395-1 1376383-1 1376421-1
3Type B/Red 1-1376389-2 1376395-1 1-1376383-2 1-1376421-2
Type C/Blue 2-1376389-3 1376395-1 2-1376383-3 2-1376421-3
Type D/Yellow 3-1376389-4 1376395-1 3-1376383-4 3-1376421-4
Type A/Natural 1376390-1 1376396-1 1376384-1
4Type B/Red 1-1376390-2 1376396-1 1-1376384-2
Type C/Blue 2-1376390-3 1376396-1 2-1376384-3
Type D/Yellow 3-1376390-4 1376396-1 3-1376384-4
Type A/Natural 1376391-1 1376397-1 1376385-1
6Type B/Red 1-1376391-2 1376397-1 1-1376385-2
Type C/Blue 2-1376391-3 1376397-1 2-1376385-3
Type D/Yellow 3-1376391-4 1376397-1 3-1376385-4
2 Row
Type A/Natural 1376392-1 1376394-1 1376386-1
4Type B/Red 1-1376392-2 1376394-1 1-1376386-2
Type C/Blue 2-1376392-3 1376394-1 2-1376386-3
Type D/Yellow 3-1376392-4 1376394-1 3-1376386-4
Type A/Natural 1376393-1 1376395-1 1376387-1
6Type B/Red 1-1376393-2 1376395-1 1-1376387-2
Type C/Blue 2-1376393-3 1376395-1 2-1376387-3
Type D/Yellow 3-1376393-4 1376395-1 3-1376387-4
*Included in Header Assy. line are Tube Stick version. Refer to the appropriate description in the catalog.
Note: All part numbers are RoHS Compliant.
Plug Housing
Note: Dimensions shown are metric.
137
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
AMP
Soft Shell
Pin and Socket Connectors
5.0 mm Power Key Connectors
.197 [5.00] Centerline
Standard Density
Material and Finish
Pre-tinned Copper Alloy
Receptacle Contacts
Material and Finish
UL94V-0, 6/6 Nylon, glass filled, Black
Double Lock Plates
Section X-X
Receptacle Contact Applicator
AWG mm2Wire Ins. Dia. Part No. Part No.
24~20 0.22~0.53 1.89~2.7 1376348-1 (Strip Form) *
20~16 0.5~1.25 2.0~3.1 1376347-1 (Strip Form) *
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Number.
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
Wire Range
Double Lock Plate Applicable
No. of Pos. AB Part No. Plug Part No.
2 13.5 5 1376394-1 첸-1376388-첸첸-1376392-첸
3 18.5 10 1376395-1 첸-1376389-첸첸-1376393-첸
4 23.5 15 1376396-1 첸-1376390-첸
6 33.5 25 1376397-1 첸-1376391-첸
* Contact the Tooling Assistance Center (TAC) for Applicator Part Number.
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
Dimensions (Double Lock Plate)
138
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
AMP
Soft Shell
Pin and Socket Connectors
5.0 mm Power Key Connectors
.197 [5.00] Centerline Standard Density
Material and Finish
Housing—6/6 Nylon, glass filled
Related Product Data
Receptacle Contacts—page 137
Double Lock Plates—page 137
Mating Headers—page 140
Plug Housings
(For Receptacle Contacts)
Section X-X
Type of Keying/Color
Applicable
No. of Double Mating
Pos. AB Type A Type B Type C Type D Lock Plate Header Assy.
Natural Red Blue Yellow Part Number Part Number
2 15 — 1376388-1 1-1376388-2 2-1376388-3 3-1376388-4 1376394-1 첸-1376382-첸
3 20 10 1376389-1 1-1376389-2 2-1376389-3 3-1376389-4 1376395-1 첸-1376383-첸
첸-1376421-첸
4 25 15 1376390-1 1-1376390-2 2-1376390-3 3-1376390-4 1376396-1 첸-1376384-첸
6 35 25 1376391-1 1-1376391-2 2-1376391-3 3-1376391-4 1376397-1 첸-1376385-첸
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
Plug Housing Part No.
Type of Keying/Color
Dimensions
139
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
AMP
Soft Shell
Pin and Socket Connectors
5.0 mm Power Key Connectors
.197 [5.00] Centerline
Standard Density
Material and Finish
Housing—6/6 Nylon, glass filled
Related Product Data
Receptacle Contacts—page 137
Double Lock Plates—page 137
Mating Headers—page 141
Plug Housing (2 Rows)
(For Receptacle Contacts)
Section X-X
Type of Keying/Color
Applicable
No. of Double Mating
Pos.
AB
Type A Type B Type C Type D Lock Plate Header Assy.
Natural Red Blue Yellow Part Number Part Number
4 15 — 1376392-1 1-1376392-2 2-1376392-3 3-1376392-4 1376394-1 씲-1376386-씲
6 20 10 1376393-1 1-1376393-2 2-1376393-3 3-1376393-4 1376395-1 씲-1376387-씲
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
Plug Housing Part No.
Type of Keying/ColorDimensions
140
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
AMP
Soft Shell
Pin and Socket Connectors
5.0 mm Power Key Connectors
.197 [5.00] Centerline Standard Density
Material and Finish
Housing—6/6 Nylon, glass filled
Tab Contacts -Copper Alloy, Tin plated
Related Product Data
Mating Plug Housings—page 138
Vertical Header Assembly
Type of Keying/Color
Section X-X
PC Board Layout
No. of Mating
Pos. AB Tube Type A Type B Type C Type D Plug Housing
(Qty.) Natural Red Blue Yellow Part Number
2 11.6 — L.P 1376382-1 1-1376382-2 2-1376382-3 3-1376382-4 씲-1376388-씲
Tube 1376437-1 (40) 1-1376437-2 (40) 2-1376437-3 (40) 3-1376437-4 (40)
3 16.6 10 L.P 1376383-1 1-1376383-2 2-1376383-3 3-1376383-4 씲-1376389-씲
Tube 1376439-1 (25) 1-1376439-2 (25) 2-1376439-3 (25) 3-1376439-4 (25)
4 21.6 15 L.P 1376384-1 1-1376384-2 2-1376384-3 3-1376384-4 씲-1376390-씲
Tube 1376440-1 (20) 1-1376440-2 (20) 2-1376440-3 (20) 3-1376440-4 (20)
6 31.6 25 L.P 1376385-1 1-1376385-2 2-1376385-3 3-1376385-4 씲-1376391-씲
Tube 1376441-1 (15) 1-1376441-2 (15) 2-1376441-3 (15) 3-1376441-4 (15)
2* 16.6 10 L.P 1376421-1 1-1376421-2 2-1376421-3 3-1376421-4 씲-1376389-씲
Tube 1376444-1 (25) 1-1376444-2 (25) 2-1376444-3 (25) 3-1376444-4 (25)
*10 mm centerline
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
Vertical Header Assy. Part No.
Type of Keying/Color
Dimensions Loose Piece
141
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) (Continued)
AMP
Soft Shell
Pin and Socket Connectors
5.0 mm Power Key Connectors
.197 [5.00] Centerline
Standard Density
Material and Finish
Housing—6/6 Nylon, glass filled
Tab Contacts—Copper Alloy, Tin
plated
Related Product Data
Mating Plug Housings—page 139
Vertical Header Assembly
(2 Rows)
Type of Keying/Color
Section X-X
PC Board Layout
No. of Mating
Pos. AB Tube Type A Type B Type C Type D Plug Housing
(Qty.) Natural Red Blue Yellow Part Number
4 11.6 — L.P 1376386-1 1-1376386-2 2-1376386-3 3-1376386-4 씲-1376392-씲
Tube 1376442-1 (40) 1-1376442-2 (40) 2-1376442-3 (40) 3-1376442-4 (40)
6 16.6 10 L.P 1376387-1 1-1376387-2 2-1376387-3 3-1376387-4 씲-1376393-씲
Tube 1376443-1 (25) 1-1376443-2 (25) 2-1376443-3 (25) 3-1376443-4 (25)
Note: Dimensions shown are metric.
Note: All part numbers are RoHS Compliant.
Vertical Header Assy. Part No.
Type of Keying/Color
Dimensions Loose Piece
142
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Engineering Notes
AMP
Soft Shell
Pin and Socket Connectors
143
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.093 [2.36] Commercial Pin and Socket Connectors
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline
Product Facts
■Polarized
■Cavity identification
■Low contact-mating force
■Dual locking lances
■Detent and positive locking
■Contacts available in brass
and phosphor bronze with
tin and gold plating
■Panel mounting and free-
hanging styles
■“F” crimp contacts
■Applicator and hand tool
available
■Economical commercial-
grade connectors
■Compatible with high-speed
application machinery and
competitive soft shells
■Wire range 24 to 14 AWG
[0.2 to 2 mm2]
■Accepts wires with
insulation diameters as
large as .180 [4.57]
■Housings available in 1 to
15 positions
■.093 plug and receptacle
housings accept pin or
socket contacts. The
preferred convention is to
use socket contacts with
receptacle housings
■Not for interrupting current
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards Association,
File No. LR 7189
R
R
Performance Characteristics
The .093 Commercial Pin and Socket
Connectors performance characteristics
found on pages 143-144 are based on
free-hanging and panel mount connec-
tors, loaded with contacts crimped on
stranded wire.
Thermal Shock— -55°C to +105°C
Temperature-Humidity Cycling—
+25°C to +65°C at 90–95% RH
Corrosion—48 hr. at 5% salt
concentration
Vibration—10-55-10 cycles per
minute at .06 [1.52] total excursion
Physical Shock—18 shocks,
50 Gs sawtooth in 11 milliseconds
Durability—50 mating cycles
Dielectric Withstanding Voltage—
1.0 kVAC
Insulation Resistance—
1000 megohms min. initial
Voltage Rating—250 V AC or DC
Connector Mating—
2.5 lb. [11.1 N] max. per contact
Connector Unmating—
1.5 lb. [6.7 N] min. per contact
Contact Retention—
10 lb. [44.5 N] min.
Technical Documents
Application Specification
114-49000 .093 Commercial Pin and
Socket Connectors
Product Specification
108-1038 .093 Commercial Pin and
Socket Connectors
144
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline Standard Density
Performance
Characteristics (continued)
Maximum Current—Maximum cur-
rent rating of .093 Commercial Pin and
Socket Connectors is limited by the
maximum operating temperature of the
housings which is 105°C including the
temperature rise of the contacts which
is a maximum of 30°C. There are
several variables which have a direct
effect on this maximum current-carrying
capability for a given connector and
must be considered for each application.
These variables are:
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current-carrying
capabilities since the wire conducts
heat away from the connector.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Related Product Data
Product Specification —108-1038
Termination Contact
Wire Size Crimp
Resistance Tensile Force
Test Resistance Force (Min.)
AWG mm2Current Milliohms
(Amps) (Max. Init.) lbs. N
24 0.2 2.0 4.0 8 35.6
22 0.3–0.4 3.0 4.0 10 44.5
20 0.5–0.6 4.5 4.0 15 66.7
18 0.8–0.9 6.0 3.5 25 111.2
16 1.25–1.4 8.0 3.5 25 111.2
14 2 10.0 3.0 30 133.4
Note: This is the total resistance between wire crimps of a mated pin and
socket.
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
Wire-to-Wire
.093 Commercial Pin and Socket Connectors — Calculated Current Table
Number of Wire AWG
Circuits 14 16 18 20 22 24
2 13.00 12.00 11.00 8.00 6.00 6.00
3 13.00 11.00 10.00 8.00 6.00 5.00
4 In-Line 11.00 10.00 9.00 7.00 5.00 4.00
4 Matrix 11.00 10.00 9.00 7.00 5.00 4.00
5 10.00 9.00 8.00 6.00 5.00 4.00
6 10.00 9.00 8.00 6.00 4.00 4.00
9 9.00 7.00 6.00 5.00 4.00 3.00
12 8.00 7.00 6.00 4.00 3.00 3.00
15 7.00 6.00 5.00 4.00 3.00 3.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection
of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully
loaded housings being 100% energized. Note: All combinations were not tested and this chart contains interpolated
and extrapolated values.
Termination Resistance/Contact Crimp Tensile Force
Minimum Wire Lengths for T-Rise vs. Current Testing
AWG Min. Length (in.) AWG Min. Length (in.)
30 2.6 18 9.4
28 3.2 16 11.3
26 4.1 14 13.7
24 5.1 12 16.4
20 7.8 10 19.3
Note: If wire lengths used are less than those listed above, the current-
carrying ability of the system will be reduced due to less heat being
conducted away from the connector. The customer should fully test
all applications.
145
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline
Contacts
Pin Diameter .093 [2.36]
Material
.010 [0.25] Stock Thickness
Pin and socket contacts can be used in
either plug or receptacle housings.
Related Product Data
Product Specification —108-1038
Application Specification
114-49000
Performance Characteristics—
pages 143-144
Housings
.198 [5.03] Centerline—pages 146-147
.250 [6.35] Centerline—pages 148-149
Panel Cutouts
.198 [5.03] Centerline Housings—
page 147
.250 [6.35] Centerline Housings—
page 148
Technical Documents—pages 143
and 205-206
Application Tooling—pages 207-210
Pin Socket
Pin
Part No. 770385-1
Socket
Part No. 770383-1
Contact Insertion Tool
(For Pins and Sockets)
Part No. 91002-1
IS 408-7347
Contact Part Numbers HDM
Wire Size Ins. Dia. Material Pin Socket Applicator Hand Tool
AWG mm2& Finish Part Part No.
Strip Form Loose Piece Strip Form Loose Piece No.
Brass,
Pre-tin 350418-1 770147-1 350417-1 770146-1
466656-15
24–18 0.2–0.9 .110 Brass,
2.79 Gold2——350417-32770146-32466656-2590872-1
Brass
Select Gold1350418-51770147-51350417-51770146-51
466656-35
Brass,
Pre-tin 350416-1 770145-1 350415-1 770144-1
466878-15
.140 Brass,
3.56 Select Gold1350416-51770145-51350415-51770144-51466878-2590871-1
20–14 0.6–2 Phos. Brz.,
Pre-tin ——350415-6 770144-6
466878-35
.180 Brass, 567337-36
770530-14— 770529-14— 567337-46—
4.57 Pre-tin 567337-66
18–14 0.8–2 .180 Brass, 567273-27
or or 4.57 Pre-tin 770385-13———
22(per Phos. Brz., 567273-37—
(18) (0.8–0.9) wire) Pre-tin ——770383-13—567273-47
1Select Gold—.000030 [.000762] min gold in mating area over .000050 [.00127] min nickel.
2Gold—.000030 [.000762] min gold in mating area, overall gold flash over .000050 [.00127] min nickel.
3These contacts have a .0125 [.318] stock thickness and accept two wires, each with maximum .180 [4.57] insulation
diameters. They can be used only with the following housing part numbers: 770364-1, 770365-1, 770450-1,
770451-1, 770452-1, and 770453-1 (see page 143).
4Contact length is .875 [22. 23]
5HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is
used on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210
for further information.
6HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is
used on AMP-O-LECTRIC Model K Machine, -6 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210
for further information.
7HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is
used on AMP-O-LECTRIC Model K Machine, -4 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210
for further information.
Note: Phosphor bronze contacts should be used in high-temperature/humidity cycling applications.
Note: All part numbers are RoHS Compliant.
.780
[19.81]
.973
[24.71]
.780
[19.81]
.973
[24.71]
Contact Extraction Tool
Part No. 318837-1
IS 408-4375
146
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline Standard Density
Housings
Free-Hanging or Panel Mount
.198 [5.03] Centerline spacing
Material
Housing —Nylon, natural color
Flammability Rating—
UL94-V-2
Related Product Data
Contacts —page 145
Product Specification —108-1038
Receptacle Plug
Receptacle Plug
2, 3, and 4 Circuit, In-Line
Receptacle Part Numbers Plug Part Numbers
No. of A Dimension Panel Mount Free-Hanging
Circuits Receptacle Plug Without With Without With Panel Free-
Detents Detents Detents Detents Mount Hanging
1—— — — —770063-1 — 770064-1
.540 .640 770065-11,5
213.72 16.26 — 770066-11,5 —7702661,3,5 770068-11770069-11
.670 .770 770070-1
317.02 19.56 — 770071-1 — 770264-13770073-1 770074-1
4.870 .970
(In-Line) 22.10 24.64 — 770076-1 — 770075-1 770077-1 770078-1
4.443 .540
(Matrix) 11.25 13.71 —— —770843-1 — 770842-1
1.070 1.170 770083-1
527.18 29.72 —— —
794015-13— 770084-1
61.268 1.378
(In-Line) 32.21 35.00 —— —770782-14— 770892-14
6.435 .535
(Matrix) 11.05 13.59 770085-1 770087-1 770088-1 770086-1 770089-1 770090-1
.670 .770 770092-1 770095-12
917.02 19.56 770091-1 770093-1 770094-1 770108-1 770096-1
.870 .970
12 22.10 24.64 770097-1 770099-1 770100-1 770098-1 770101-1 770102-1
1.070 1.170
15 27.18 29.72 770103-1 — 770105-1 — 770106-1 770107-1
1.248 [6.30] centerline.
2Mounting ears at wire end.
3Tool removable.
4Positive lock.
5600 V AC or DC
Note: All part numbers are RoHS Compliant.
.970
[24.64]
.245
[6.22]
.360
[9.14]
198
5.03]Typ.
1.095
[27.81]
.340
[8.64]
A
Panel-Mount Flange
.198
[5.03]Typ.
A
1.125
[28.58]
.240
[6.10]
.240
[6.10]1.000
[25.40]
1 Circuit
147
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline
Housings
Free-Hanging or Panel Mount
.198 [5.03] Centerline spacing
Material
Housing —Nylon, natural color
Flammability Rating —
UL94V-2
Related Product Data
Contacts —page 145
Product Specification —108-1038
Receptacle (Free-Hanging) Plug (Free-Hanging)
4, 6, 9, 12, and 15 Circuit, Matrix
Receptacle Plug
Panel Cutout Dimensions
No. of Receptacle Plug
Circuits ABAB
.312 .725 .375 .800
27.92 18.42 9.53 20.32
.312 .840 .375 .933
37.92 21.34 9.53 23.70
4.312 1.038 .375 1.131
(In-Line) 7.92 26.37 9.53 28.73
.600 .718 .695 .750
615.24 18.24 17.65 19.05
.725 .828 .660 .937
918.42 21.03 16.76 23.80
.725 1.050 .760 1.155
12 18.42 26.67 19.30 29.34
.655 1.240 .760 1.343
15 16.64 31.50 19.30 34.11
Note: The panel should be punched so that the housing enters in the same
direction as the punch.
Recommended
Panel Cutouts
Maximum panel thickness is
.090 [2.29].
.198
[5.03]
.430
[10.92]
.630
[16.0]
.198
[5.03]
.198
[5.03]
.198
[5.03]
.735 ±.010
[18.67 ±0.25]
.535 ±.010
[13.59 ±0.25]
.340
[8.64]
1.170
[29.72]
.198
[5.03]
Typ.
1.095
[27.81]
.240
[6.10]
1.070
[27.18]
.198
[5.03]
Typ.
1.125
[28.58]
B
A
5 Circuit, In-Line
1.000 ±.010
[25.4 ±0.25]
.970 ±.010
[24.64 ±0.25]
148
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline Standard Density
Housings
Free-Hanging or Panel Mount
.250 [6.35] Centerline spacing
Material
Housing —Nylon, natural color
Flammability Rating —
UL94V-2
Voltage Rating—600 V AC or DC
Related Product Data
Contacts —page 145
Product Specification —108-1038
Receptacle Plug
Receptacle Plug
Receptacle Plug
Recommended
Panel Cutouts
Maximum panel thickness is
.062 [1.57].
Note: The panel should be punched
so that the housing enters in the same
direction as the punch.
4 Circuit, In-Line
3 Circuit, In-Line
6 Circuit, Matrix
Receptacle Part Numbers Plug Part Numbers
No. of Panel Free- Panel Free-
Circuits Mount Hanging Mount Hanging
3770269-1 770339-1 770338-1 770276-1
770771-11
4 770329-1 770337-1 770330-1 770336-1
6 770372-1 770360-1 770373-1 770361-1
1Pre-bent mounting ears.
Panel Cutout Dimensions
No. of Receptacle Plug
Circuits ABAB
.310 .920 .365 1.022
37.87 23.37 9.27 25.96
.310 1.168 .365 1.270
47.87 29.67 9.27 32.26
.608 .946 .658 1.048
615.44 24.03 16.71 26.62
.250
[6.35]Typ.
.790
20.07]
Panel-Mount
Flange
1.145
[29.08]
545
3.84]
Max.
.250
[6.35]
.641
[16.28]
.886
[22.50]
.250
[6.35]
.250
[6.35]Typ.
1.105
[28.07]
Panel-Mount
Flange
1
1.112
[28.24]
1.100
[27.94]
Panel-Mount
Flange
.350
[8.89]Max.
.250
[6.35]Typ.
.350
[8.89]
.250
[6.35]
.862
[21.89]
Panel-Mount
Flange
1.100
[27.94]
.250
[6.35]Typ.
.765
[19.43]
.255
[6.48]Max. 1.140
[28.96]
Panel-Mount
Flange
1.005
[25.53]
1.140
[28.97]
Panel-Mount
Flange
250
6.35]Typ.
.255
[6.48]
B
A
Note: All part numbers are RoHS Compliant.
149
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.093 [2.36] Commercial Pin and Socket Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
.093 [2.36] Commercial Pin and Socket Connectors
.198 [5.03] Centerline
Housings
Free-Hanging or Panel Mount
.250 [6.35] Centerline spacing
Material
Housing —Nylon, natural color
Flammability Rating —
UL94V-2
Voltage Rating —600 V AC or DC
Related Product Data
Contacts —page 145
Product Specification —108-1038
Receptacle Plug
Receptacle Part Numbers Plug Part Numbers
No. of Panel Free- Panel Free-
Circuits Mount Hanging Mount Hanging
2—770364-11— 770365-11
3 770453-12770451-1 770452-12770450-1
1.248 [6.30] centerline.
2See panel cutout dimensions on page 58.
Dual Wire
2 Circuit, In-Line
Positive Lock
2, 3 and 4 Circuit, In-Line
No. of Receptacle Part Numbers Plug Part Numbers
Circuits Free-Hanging Free-Hanging
2 770424-11770425-11
3 770785-1 770783-1
4 770784-1 770810-1
1.248 [6.30] centerline.
Receptacle Plug
Receptacle Plug
.248
[6.30]
.255
[6.48]
1.073
[27.25]
.536
[13.61]
.248
[6.30]
1.041
[26.44]
.666
[16.92]
.350
[8.89]
.862
[21.89]
.250
[6.35]
.500
[12.70]
Panel-Mount
Flange
1.275
[32.39]
.255
[6.48]Max.
.250
[6.35]Typ.
.765
[19.43]
.500
[12.70]
Panel-Mount
Flange
1.315
[33.40]
.248
[6.30]
.445
[11.30]1.245
[31.62]
.545
[13.84]
.248
[6.30]
1.250
[31.57]
.650
[16.51]
.555
[14.10]
3 Circuit, In-Line
Note: All part numbers are RoHS Compliant.
150
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Engineering Notes
AMP
Soft Shell
Pin and Socket Connectors
151
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
Standard Density
Performance Characteristics
The Commercial MATE-N-LOK
Connector performance characteristics
found on pages 151-152 are based on
free-hanging and panel mount connec-
tors, loaded with contacts crimped on
stranded wire.
Dielectric Withstanding Voltage—
1.5 KVAC between adjacent circuits
Insulation Resistance—
500 megohms minimum initial between
adjacent circuits
Voltage Rating—250 V AC or DC
Connector Mating—
4 lb. max. per circuit
Connector Unmating—
0.7 lb. min. per circuit
Contact Retention—15 lb. min.
per contact
Durability—50 cycles, mating and
unmating
Product Facts
■Fully polarized nylon
housings
■Easy cavity identification
■Locking devices are integral
part of design. Connector
halves will hold together
under severe conditions of
vibration and shock
■Built-in contact stabilization
and self-aligning features
■Hot side egg-crate design
for safety
■Precision molded to exact-
ing tolerances
■Contacts accept a wire
size range of 30-14 AWG
[.05-2.0 mm2
]
■Keying plug available
■“Clean” design contact —
no sharp projections to
impede insertion or damage
housings
■Low insertion/extraction
forces
■Contacts available in pre-tin
or gold over nickel plated to
fit the application require-
ments
■Wire-to-PC Board capability
using pin or socket headers
■Solderability—Headers meet
MIL-STD 202 method 208
■Four circuit PC Board-to-PC
Board capability available
by mating vertical socket
header with either vertical,
right-angle or surface mount
pin header
■Four circuit insulation dis-
placement connector (IDC)
available
■Ultraviolet (UV) stable
housings available in 1, 2
and 3 circuit
■Not for interrupting current
■Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
■Certified by
Canadian Standards
Association,
File No. LR 7189A
R
R
Technical Documents
Product Specifications
108-1000 Commercial MATE-N-LOK
Connectors
108-1077 Commercial MATE-N-LOK
PC Board Headers
108-49000 IDC Connectors
Application Specifications
114-1012 Commercial MATE-N-LOK
Contacts
114-49001 IDC Connectors
Instruction Sheets
408-7209, 408-7166, 408-7200,
408-7201, 408-7215, 408-3186,
408-7300
152
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline Standard Density
Performance
Characteristics (Continued)
Maximum Current—Maximum cur-
rent rating of Commercial MATE-N-LOK
connectors is limited by the maximum
operating temperature of the housings
which is 105°C including the tempera-
ture rise of the contacts which is a
maximum of 30°C. There are several
variables which have a direct effect on
this maximum current-carrying capabil-
ity for a given connector and must
be considered for each application.
These variables are:
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current-carrying
capabilities since the wire conducts heat
away from the connector.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Printed Wiring Board Conductor
Size—The finished trace conductor
width and thickness should be maxi-
mized to allow for the greatest current-
carrying capacity and heat dissipation.
Commercial MATE-N-LOK connectors
also will withstand the following tests:
Vibration—10-55-10 cycles per
minute at .06 inch total excursion
Physical Shock—18 drops,
50 G sawtooth at 11 milliseconds
Housing Panel Mount Retention—
40 lb. min. 3 and 4 circuit
65 lb. min. 6, 9, 12, and 15 circuit
Housing Lock Strength with
Positive Locking Devices
Engaged—
25 lb. min.
Thermal Shock— -55°C to +85°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Corrosion—48 hr. at 5% salt
concentration
Related Product Data
Product Specifications
108-1000 Commercial MATE-N-LOK
Connectors
108-1077 Commercial MATE-N-LOK
PC Board Headers
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
Wire-to-Wire
Motor Mount Calculated Current Table
Number of Wire Gauge
Circuits 14 16 18 20 22 24 30
6 13.00 10.50 9.50 7.50 6.00 5.00 2.50
8 12.00 9.50 8.50 7.00 5.50 4.50 2.50
10 11.00 9.00 8.00 6.50 5.00 4.50 2.00
12 10.50 8.50 7.50 6.00 5.00 4.00 2.00
16 9.50 8.00 7.00 5.50 4.50 3.50 2.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection of a con-
nector family. All applications should be tested by the end user. The values listed are per circuit for fully loaded housings
being 100% energized. Note: All combinations were not tested, and this chart contains interpolated and extrapolated values.
Calculated Current Table
Number of Wire Gauge
Circuits 14 16 18 20 22 24 30
1 19.00 15.50 14.00 11.00 9.00 7.50 4.00
2 18.00 14.50 13.00 10.50 8.50 7.00 4.00
3 16.00 13.00 12.00 9.50 7.50 6.50 3.50
4 15.00 12.50 11.00 9.00 7.00 6.00 3.00
6 Matrix 13.00 10.50 9.50 7.50 6.00 5.00 3.00
8 12.50 10.50 9.00 7.50 6.00 5.00 2.50
9 11.00 9.00 8.00 6.50 5.50 4.50 2.50
10 12.00 9.50 8.50 7.00 5.50 4.50 2.50
12 10.50 8.50 7.50 6.00 5.00 4.00 2.00
15 9.50 8.00 7.00 5.50 4.50 4.00 2.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection of a con-
nector family. All applications should be tested by the end user. The values listed are per circuit for fully loaded housings
being 100% energized. Note: All combinations were not tested, and this chart contains interpolated and extrapolated values.
Termination Contact
Resistance Crimp
Wire Size Test Resistance Tensile Force
AWG mm2Current Milliohms Force (Min.)
(Amps) (Max. Init.) lbs. N
30 .05 .50 4.00 29
28 .08 .75 3.50 3 13
26 .12 1.00 3.50 7 31
24 .2 1.5 3.50 10 44
22 .3 3 3.50 15 67
20 .5 4.5 3.00 20 89
18 .8 6 3.00 30 133
16 1.2 8 2.75 30 133
14 2.0 10 2.75 35 156
Note: This is the total resistance between wire crimps of a mated pin and socket.
Wire-to-Board
Due to the vast differences in trace
geometry and printed circuit board
configurations, we are unable to
provide a separate current carrying
chart for our printed circuit board
header products. However, the
above Wire-to-Wire charts may be
used as a guideline for headers if
the trace width and thickness is
equal to the listed wire gauge. For
vertical headers, only 95% of the
Wire-to-Wire value should be used.
For right-angle headers, only 75% of
the Wire-to-Wire value should be
used. The chart values are only a
tool for connector selection and will
require the customer to fully test
their application.
Minimum Wire Lengths for T-Rise vs. Current Testing
AWG Min. Length (in.) AWG Min. Length (in.)
30 2.6 18 9.4
28 3.2 16 11.3
26 4.1 14 13.7
24 5.1 12 16.4
20 7.8 10 19.3
Note: If wire lengths used are less than those listed above, the current carry-
ing ability of the system will be reduced due to less heat being conducted
away from the connector. The customer should fully test all applications.
Termination Resistance/Contact Crimp Tensile Force
153
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
Standard Density
Commercial MATE-N-LOK Connector Mating Combinations
Connector Part Number Mating Connector Part Number
PC Board Headers
Number Flammability Housing Connector Housing Housing Vertical Vertical
of Rating Style Type Part No. Part No. Type Pin Right-Angle Socket
Circuits Plating Standard Long Pin Standard Long
Tail Tail Tail Tail
1-480350-0 Pin: FH ——————
Socket: FH 1-480349-0 1-480351-0 Pin: FH ——— ———
1 UL94V-2 In-Line Positive Lock
Socket: FH 1-480400-0 1-480401-1 Pin: FH ——————
UV Stable UV Stable
Socket: FH 1-480318-0 1-480319-0 Pin: FH Pre-tin 350209-1 350422-1 794120-1 ——
Duplex11586512-2 ————
Socket: FH 1-480393-1 1-480498-1 Pin: FH ——————
2 UL94V-2 In-Line UV Stable UV Stable
Socket: FH 1-480720-0 794012-1 Pin: FH Pre-tin 350539-1 350540-1 ———
Positive Lock Positive Lock Duplex11586530-2 ————
Socket: FH 1-480303-0 Pre-tin 350210-1 350423-1 643488-1 ——
1-480305-0 Pin: FH Duplex11586514-2 ————
Socket: PM 1-480304-0 ——————
3 UL94V-2 In-Line Socket: FH 1-480721-0 ——Pre-tin 350541-1 350542-1 ———
Positive Lock Duplex11586532-2 ————
Socket: FH 1-480388-0 1-480387-0 Pin: FH ——————
UV Stable UV Stable
4See next page for 4 position mating combinations
1-480340-0 Pin: FH Pre-tin 1-380999-0 350425-1 ———
Socket: FH 1-480270-0 Positive Lock
Positive Lock 1-480271-0 Pin: MM Duplex12-1586546-0 1586526-2 ———
Positive Lock
6 UL94V-2 Matrix Socket: PM 1-480273-0 1-480276-0 Pin: PM Pre-tin —— ———
Positive Lock Positive Lock Duplex1—— ———
Pin: PM 1-480276-0 1-480273-0 Socket: PM Pre-tin —— —350641-1 350576-1
Positive Lock Positive Lock Duplex1—— ———
1-480345-0 Pin: FH Pre-tin 350212-1 350426-1 ———
8UL94V-2 Dual Socket: FH 1-480283-0 Positive Lock
Row Positive Lock 1-480284-0 Pin: MM Duplex11586518-2 1586528-2 ———
Positive Lock
9 UL94V-2 Matrix Pin: PM 1-480277-0 1-480274-0 Socket: PM Pre-tin —— —350642-1 350577-1
Positive Lock Positive Lock Duplex1—— ———
1-480339-0 Pin: FH Pre-tin 1-380991-0 350219-1 ———
10 UL94V-2 Dual Socket: FH 1-480285-0 Positive Lock
Row Positive Lock 1-480286-0 Pin: MM Duplex12-1586544-0 ————
Positive Lock
Dual Socket: MM 1-480287-0 1-480288-0 Pin: MM Pre-tin 350213-1 350220-1 ———
12 UL94V-2
Row Positive Lock Positive Lock Duplex11586520-2 1586524-2 ———
Matrix Pin: PM 1-480278-0 1-480275-0 Socket: PM Pre-tin —— —350643-1 350578-1
Positive Lock Positive Lock Duplex1—— ———
15 UL94V-2 Matrix Pin: PM 1-480324-0 1-480323-0 Socket: PM Pre-tin —— —350644-1 350579-1
Positive Lock Positive Lock Duplex1—— ———
16 UL94V-2 Dual Socket: MM 1-480438-0 1-480439-0 Pin: MM Pre-tin 350214-1 350427-1 ———
Row Positive Lock Positive Lock Duplex11586522-2 1586529-2 ———
FH: Free-Hanging PM: Panel Mount MM: Motor Mount
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact.
Note: All part numbers are RoHS Compliant.
154
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline Standard Density
Commercial MATE-N-LOK 4 Position In-Line Mating Combinations (Note: These connectors are used by the disk drive industry.)
Connector Part Number Mating Connector Part Number
Socket Connectors PC Board Pin Headers
Flammability Connector Connector Housing Housing Insulation PC Board Vertical Right-Angle
Rating Type Part No. Part No. Type Plating
Displacement AWG Vertical
Connector Socket Standard Long Surface Standard W/Fixed W/Fixed Belt
Header Tail Tail Mount Belt Reverse Pol.
Socket Pre-tin — — — 350543-1 350544-1 — — — —
Housing 1-480772-0 — —
Positive Lock Duplex1— — — 1586534-2 1586536-2 — — — —
Socket 350211-1 641737-1
Housing Pre-tin — — — 770328-13350424-1 770829-1 174804-1 174552-1
Detent 1-480424-0 1-480426-0 Pin 770846-1
Lock Duplex1— — — 1586515-2 1586525-2 — — — —
Pin 1-480424-0 Socket 770156-2 22
Housing Pre-tin 770156-3 18 770997-1 — — — — — —
1-480426-0
1-480425-0 Socket
770156-4 20 794287-12
UL94V-2
Detent
PM 770156-5 16
Lock
Duplex1770526-1 18 — — — — — — —
Pin Housing Socket
Detent Lock 3-480426-0 3-480425-0 High — — — — — — — — — —
High Temp Temp
Socket 770997-1 641737-1
1-480426-0 Pin Pre-tin — — — 350211-1 350424-1 770829-1 174804-1 174552-1
Header 794287-12770846-1
Insulation 770156-2
Displacement 770156-3 Pre-tin — — — 350211-1 350424-1 770829-1 641737-1 174804-1 174552-1
Connector 770156-4 1-480426-0 Pin 770846-1
(IDC) 770156-5
770526-1 Duplex1— — — 1586515-2 1586525-2 — — — —
Socket 770827-1 794132-1 Pin Pre-tin — — — — — — 1-641737-1 — —
Housing
Insulation 794036-1
Displacement 794036-2 794132-1 — Pre-tin — — — — — — 1-641737-1 — —
Connector 794036-3
UL94V-0 (IDC) 794036-4
794036-1 18
Right-Angle 1-641737-1 770827-1 Socket Pre-tin 794036-2 20 — 794236-1 — — — — —
Pin Header 794036-3 22
794036-4 16
PM: Panel Mount
1Duplex Finish — Plated with .000030 [.000762] min. gold in matting area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact.
2Surface Mount Compatible.
3With Drainholes
Note: All part numbers are RoHS Compliant.
155
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
Standard Density
Wire Size Ins. Dia. Contact Part Numbers HDM Hand Tool
Range Material & Finish Pin Socket Applicator
AWG [mm2]Range Strip Form Loose Piece Strip Form Loose Piece Part No. Part No.
30-22 .040-.075 Brass, Pre-tin 350079-1 61174-1 350078-1 61173-1 466426-13
[.05-.3] 1.02-1.91 Phos. Brz., Pre-tin 350079-4 — 350078-4 61173-4 466426-2391515-1
Brass, Gold1350079-5 61174-5 350078-5 61173-5 466426-33
Brass, Pre-tin 61116-1 60618-1 61314-1 60617-1
24-18 .060-.100 Phos. Brz., Pre-tin 61116-4 60618-4 61314-4 60617-4 466320-1391512-1
Brass, Gold161116-5 60618-5 61314-5 60617-5 466320-23
[.2-.8] 1.52-2.54 Phos. Brz., Select Gold261116-6 60618-6 61314-6 60617-6 466320-4391528-14
Brass, Select Gold261116-7 — 61314-7 —
Brass, Pre-tin 61118-1 60620-1 61117-1 60619-1
20-14 .100-.130 Phos. Brz., Pre-tin 61118-4 60620-4 61117-4 60619-4 687763-13
Brass, Gold161118-5 60620-5 61117-5 60619-5 687763-2391504-1
[.5-2.0] 2.54-3.30 Phos. Brz., Gold161118-6 — 61117-6 60619-7 687763-63
Brass, Select Gold261118-7 — 61117-7 —
(2) 18 [.8] or (2) .115 Max. Brass, Pre-tin 350558-1 350639-1 350557-1 — 687898-13
(1) 18 [.8] and 2.92 687898-2391504-1
(1) 16 [1.2] (stacked) Phos. Brz., Pre-tin 350558-4 — 350557-4 350638-4 687898-43
1Gold Finish — Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact.
2Select Gold Finish — Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact.
3HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K
Machine; -3, -4, or -6 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information.
4Use Hand Tool No. 91528-1 for .043-.075 [1.09-1.90] insulation diameter.
Notes:
1. Extraction Tools: Pins — No. 1-305183-1 (IS 408-7158); Sockets — No. 1-305183-2 (IS 408-7158); Pins and Sockets — No. 465644-1 (IS 408-7211)
2. Insertion Tools: No. 455830-1 (IS 408-7984)
Contacts
Pin diameter .084 [2.13]
Stock thickness .012 [.305]
These contacts are to be used in
Commercial MATE-N-LOK housings
only.
Related Product Data
Product Specification
108-1000 Commercial MATE-N-LOK
Connectors
Application Specification
114-1012 Commercial MATE-N-LOK
Contacts
Performance Characteristics—
pages 151-152
Housings—pages 157-159
Technical Documents—pages 151
and 205-206
Application Tooling—pages 207-210
Pin Socket
Commoning Tabs
Material and Finish
Brass, tin plated
Stock thickness .008 [.203]
.805
[20.44]
.695
[17.65]
A
B
.170
[4.32]
.008
[.203]
Number of Dimensions Part
Holes AB Number
2.377 .203 60843-1
9.58 5.16
2.355 .195 350444-1
9.02 4.95
3.579 .203 60842-1
14.71 5.16
3.550 .195 350444-2
13.97 4.95
Note: Commoning tabs are designed to be used with pin housings.
Note: All part numbers are RoHS Compliant.
156
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline Standard Density
Contacts
Pin diameter .084 [2.13]
Stock thickness .012 [.305]
These contacts are to be used in
Commercial MATE-N-LOK housings
only.
Related Product Data
Product Specification
108-1000 Commercial MATE-N-LOK
Connectors
Application Specification
114-1012 Commercial MATE-N-LOK
Contacts
Performance Characteristics—
pages 151-152
Housings—pages 157-159
Technical Documents—pages 151
and 205-206
Application Tooling—pages 207-210
Part Number
200821-1
Note: Keying plug snaps into socket housing
Pin Socket
Keying Plug
IS 408-7582
Material
Housing — Nylon, natural color
Flammability Rating — UL94V-2
1.000
[2.54]
Part Numbers
Type of Contact L Dim. Material & Finish Pin Socket
Pin Socket Loose Piece Loose Piece
PC Board
1.110 1.010 Phos. Brz., Pre-tin 61518-1161320-11
[28.19] [25.65]
1.210 1.110 Phos. Brz., Pre-tin
[30.73] [28.19] 350074-12350073-12
1For .062 [1.57] max. board thickness — Board hole size .057 [1.45]
2For .125 [3.14] max. board thickness — Board hole size .057 [1.45]
L L
.900
[22.86]
Grounding Pin
(.095 [2.41] longer than standard pin)
(Mate first, break last, not for interrupting
current)
PC Board Contacts
Wire Size Range Ins. Dia. Contact Part Numbers HDM Hand Tool
Material & Finish Applicator
AWG [mm2] Range Strip Form Loose Piece Part No. Part No.
24-18 .060-.100 466320-11
Brass, Pre-tin 61527-2 — 466320-2191512-1
[.2-.8] 1.52-2.54 466320-41
1HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is
used on AMP-O-LECTRIC Model K Machine; -3, -4, or -6 is used on AMP-O-LECTRIC Model G Machine. See
pages 207-210 for further information.
Note: All part numbers are RoHS Compliant.
157
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
Standard Density
Housings
Free-Hanging
.200 [5.08] Centerline spacing
Material
Housing —Nylon, natural color
Flammability Rating —UL94V-2
Related Product Data
Product Specification
108-1000 Commercial MATE-N-LOK
Connectors
Performance Characteristics—
pages 151-152
Contacts—pages 155-156
Commoning Tabs—page 155
Keying Plug—page 156
Technical Documents—pages 151
and 205-206
Mating Pin Headers—pages 161-164
Mating Socket Headers—page 162
Mating IDC—page 163
1 Circuit
Pin Housing (Cap)
Pin Housing (Cap) Positive Lock
Socket Housing (Plug)
Number of Dimensions Part Numbers
Circuits ABCDEF Pin Housing (Cap) Socket Housing (Plug)
.300 1.200 —.260 .870 — 1-480350-011-480349-0
7.62 30.48 6.60 22.10
1.300 1.240 —.260 .870 — 1-480351-021-480349-0
7.62 31.49 6.60 22.10
.300 1.325 —.260 .995 — 1-480401-01,3 1-480400-03
7.62 33.65 6.60 25.27
.610 .930 .330 .530 .860 .295 1-480319-01,5 1-480318-05
15.49 23.62 8.38 13.46 21.84 7.49
2.610 .930 .330 .530 .860 .295 1-480498-11,3,5 1-480393-13,5
15.49 23.62 8.38 13.46 21.84 7.49
.810 .930 .325 .825 .850 .290 1-480305-01,5 1-480303-05
20.57 23.62 8.25 20.95 21.60 7.37
3.810 .930 .325 .825 .850 .290 1-480387-01,3,5 1-480388-03,5
20.57 23.62 8.25 20.95 21.60 7.37
1.010 .930 .330 1.030 .850 .310 1-480426-01,5,6 1-480424-05,6
425.65 23.62 8.38 26.16 21.60 7.88
———
1.030 .850 .310 794132-14,5,6 770827-14,5,6
26.16 21.60 7.88
1Detent lock
2Positive lock
3UV Stable black color
4Housing Material UL94V-0 rated
5Housing accepts double wire applications where individual insulation diameters do not exceed .115 [2.92].
6Used by the disk drive industry.
Pin Housing (Cap) Detent Lock Socket Housing (Plug)
2, 3 and 4 Circuit,
In-Line
B
C
A
BE
D
F
B
A
A
ED
.200
[5.08]
Note: All part numbers are RoHS Compliant.
158
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline Standard Density
Housings
Free-Hanging, Positive Lock
Material
Housing —Nylon, natural color
Flammability Rating —UL94V-2
Related Product Data
Product Specification
108-1000 Commercial MATE-N-LOK
Connectors
Performance Characteristics—
pages 151-152
Contacts—pages 155-156
Commoning Tabs—page 155
Keying Plug—page 156
Technical Documents—pages 151
and 205-206
Mating Headers—pages 161-164
8 and 10 Circuit, Dual Row
Pin Housing (Cap) Socket Housing (Plug)
A
.195
[4.95]
.785
[19.94]
.360
[9.14]
.930
[23.62]
.725
[18.42]
D
.850
[21.60]
6 Circuit, Dual Row
Pin Housing (Cap) Socket Housing (Plug)
.195
[4.95]
.785
[19.94]
.360
[9.14]
.930
[23.62]
.850
[21.59]
.725
[18.41]
AD
Number of Dimensions Part Numbers
Circuits ADPin Housing (Cap) Socket Housing (Plug)
6.705 .610 1-480340-0 1-480270-01
17.91 15.49
8.900 .805 1-480345-0 1-480283-01
22.86 20.44
10 1.095 1.000 1-480339-0 1-480285-01
27.81 25.40
1Housing accepts double wire applications where individual insulation diameters do not exceed .115 [2.92].
A
.850
[21.59]
.375
[9.52]
.150
[3.81]
.200
[5.08]
Number of A Part Numbers
Socket Housing Mates with Mates with
Circuits Dim. (Plug) Pin Headers Cap Housing
2.435 1-480720-0 350539, 350540 794012-1
11.04
3.630 1-480721-0 350541 —
16.00
4.830 1-480722-013505431, 3505441 —
21.09
1Used by the disk drive industry.
2, 3, and 4 Circuit,
In-Line
.200 [5.08] Centerline spacing
Socket Housing (Plug)
Note: All part numbers are RoHS Compliant.
159
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
Standard Density
Housings
Panel Mount, Positive Lock
Material
Housing —Nylon, natural color
Flammability Rating —UL94V-2
Related Product Data
Product Specification
108-1000 Commercial MATE-N-LOK
Connectors
Performance Characteristics—
pages 151-152
Contacts—pages 155-156
Commoning Tabs—page 155
Keying Plug—page 156
Technical Documents—pages 151
and 205-206
Mating Socket Headers—page 162
Mating IDC—page 163
Recommended Panel
Cutout for Panel Mount
Socket Housing
View is from socket housing entry
side
Mounting Information
1. Recommended panel thickness—
.025-.065 [.635-1.65].
2. Both locking legs are to be
squeezed together and the hous-
ing is to be inserted “straight-in”,
as opposed to a rocking manner.
3. The panel should be punched so
that the housing enters the panel
in the same direction as the
punch.
4. The panel must not have any
material (paint, porcelain, etc.)
applied in the mounting hole area
that would decrease the retention
of the housing in the panel.
5. If the two items above are not
complied with, the “A” dimension
should be reduced .020 [5.08] for
proper retention.
3 and 4 Circuit, In-Line
3 and 4 Circuit, In-Line 6, 9, 12 and 15 Circuit,
Matrix
Pin Housing (Cap) Socket Housing (Plug)
Number of Dimensions Part Numbers
Circuits EFGPin Housing (Cap) Socket Housing (Plug)
3.325 .810 .630 1-480305-021-480304-0
8.26 20.57 16.00
4.330 1.010 .825 1-480426-02,4 1-480425-04
8.38 25.65 20.96 3-480426-01,2,4 3-480425-01,4
6—
.665 .555 1-480276-031-480273-0
16.89 14.10
9—
.905 .795 1-480277-031-480274-0
22.99 20.19
12 — 1.145 1.045 1-480278-031-480275-0
29.08 26.54
15 — 1.382 1.280 1-480324-031-480323-0
35.10 32.51
1Housing material has 125°C temperature rating
2Detent lock
3Positive lock
4Used by disk drive industry
Note: All part numbers are RoHS Compliant.
Number Dimensions
Circuits AB
3.890 .645–.635
22.61 16.38–16.13
41.100 .845–.835
27.94 21.46–21.21
6.840 .575–.570
21.34 14.61–14.48
91.075 .815–.810
27.31 20.70–20.57
12 1.320 1.055–1.050
33.53 26.80–26.67
15 1.550 1.290–1.285
39.37 32.77–32.64
Note: Dimensions “C” and “D” are to
be equal.
6, 9, 12 and 15 Circuit,
Matrix
.200
[5.08]
.240
[6.09]
.202
[5.130]
.930
[23.62]
.930
[23.62]
.850
[21.59]
.850
[21.59]
.850
[21.59]
.650
[16.51]
.310
[7.87]
E
F
FG
G
.215
[5.46]
.015
[.381]
All Corners
.275
[6.98]
A
A
B
B
CC
D
D
.660
[16.76]
.219
[5.56]
.218
[5.54]
R Max.
.015
[.381]
All Corners
R Max.
Pin Housing (Cap) Socket Housing (Plug)
160
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline Standard Density
Number of Dimensions Part Numbers
Circuits E F Pin Housing (Cap) Socket Housing (Plug)
UL94V-2 Nylon, Natural Color
6.705 .610 1-480271-0 1-480270-01
17.90 15.49
8.900 .805 1-480284-0 1-480283-01
22.86 20.45
10 1.095 1.000 1-480286-0 1-480285-01
27.81 25.4
12 1.290 1.195 1-480288-0 1-480287-0
32.77 30.35
16 1.680 1.585 1-480439-0 1-480438-0
42.67 40.26
1Housing accepts double wire applications where individual insulation diame-
ters do not exceed .115 [2.92].
Note: All part numbers are RoHS Compliant.
Number of A
Circuits Dim.
6.715
18.16
8.910
23.11
10 1.105
28.07
12 1.300
33.02
16 1.690
42.93
Mounting Information
1. Recommended panel thickness
“E” is .040-.100 [1.02-2.54] and is
dependent on “T” and “R”.
2. The pin housing must be inserted
in a rocking manner.
3. The panel must be punched so
that the housing enters the panel
in the same direction as the
punch.
.585
[14.86]
A
AE
R
T
Section A-A
A
.015
[.381]
All Corners
R Max.
Note: Motor mount housings may be used in
flat panels
Motor Mount, Positive Lock
.195
[4.95]
.785
[19.94]
.360
[9.14]
.930
[23.62]
.850
[21.59]
.725
[18.41]
EF
Pin Housing (Cap) Socket Housing (Plug)
Recommended
Panel Cutout for
Motor Mount
Pin Housing
View is from pin housing entry
side.
6, 8, 10, 12 and 16 Circuit,
Dual Row
161
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
Standard Density
PC Board Vertical Pin
Headers
Material
Housing — Nylon, natural color
Flammability Rating — UL94V-2
Contacts — Phosphor bronze
Solder tail diameter .062 [1.57]
Related Product Data
Product Specifications
108-1077 Commercial MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 151-152
Technical Documents—pages 151
and 205-206
Mating Socket Housings—
pages 157-160
Mating Socket Headers—page 162
Mating IDC—page 163
Detent Lock Recommended PC Board Hole Layout
Mounting Dimensions
Recommended PC Board Hole Layout
Mounting Dimensions
Positive Lock
Positive Lock
2, 3, and 4 Circuit,
In-Line
6, 8, 10, 12 and 16 Circuit,
Dual Row
Number of A Type Part Numbers Mates with
Standard2Long3Socket Housing
Circuits Dim. Lock Finish Tail Tail Part Number
Positive Pre-tin 350539-1 350540-1 1-480720-0
2.515 Duplex11586530-2 —
13.09 Detent Pre-tin 350209-1 350422-1 1-480318-0
Duplex11586512-2 —
Positive Pre-tin 350541-1 350542-1 1-480721-0
3.715 Duplex11586532-2 —
18.17 Detent Pre-tin 350210-1 350423-1 1-480303-0
Duplex11586514-2 —
Positive Pre-tin 350543-15350544-151-480722-05
Duplex11586534-251586536-25
.915 Pre-tin 350211-15350424-15
4 794236-15,8 1-480424-04,5
23.24 Detent Post-tin 1586627-15,6
1-1586627-15,6,7
Duplex11586515-251586525-25
6.705 Positive Pre-tin 1-380999-0 350425-1 1-480270-0
17.91 Duplex12-1586546-0 1586526-2
8.900 Positive Pre-tin 350212-1 350426-1 1-480283-0
22.86 Duplex11586518-2 1586528-2
10 1.095 Positive Pre-tin 1-380991-0 350219-1 1-480285-0
27.81 Duplex12-1586544-0 —
12 1.290 Positive Pre-tin 350213-1 350220-1 1-480287-0
32.77 Duplex11586520-2 1586524-2
16 1.680 Positive Pre-tin 350214-1 350427-1 1-480438-0
42.68 Duplex11586522-2 1586529-2
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use standard tail for .062 [1.57] thick PC Board.
3Use long tail for .125 [3.18] thick PC Board.
4Other mating connectors include a vertical PC Board socket header and the insulation displacement connectors (IDC).
5Used by the disk drive industry.
6With drain holes.
7Tube loaded.
8Housing material UL94V-0 rated.
Note: All part numbers are RoHS Compliant.
.330
[8.38]
A
A
.375
[9.52]
.375
[9.52]
.200
[5.08]
.330
[3.38]
Typ.
.070
[1.78]
.070
[1.78]
.360
[9.14]
.375
[9.14]
.785
[19.93]
A
Dia. Typ. .195
[4.95] Typ.
Dia. Typ.
162
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline Standard Density
.153
[3.89]
1.000
[25.40]
.484
[12.30]
.120
[3.05]
.330
[8.38]
Contact
Housing
.300
[7.62]
.375
[9.53]
.375
[9.53]
.300
[7.62]
.100
[2.54]
.100
[2.54]
.350
[8.89]
.075
[1.91]
.100
[2.54]
.100
[2.54] Typ.
.150
[3.8] Min.
.125
[3.18]
2 Plcs.
1234
See
Note
Dia.
Dia.
6, 9, 12 and 15 Circuit,
Matrix
Recommended PC Board Hole Layout
.062 [1.57] thick PC Board
Number of A Part Numbers Mates with
Finish Pin Housing
Circuits Dim. Standard Tail5Long Tail6Part Number
1.000 770997-13—
4 Pre-tin 794285-13,7 — 1-480426-02,3
25.40 794287-13,4,8 —
6.720 Pre-tin 350641-1 350576-1 1-480276-0
18.29 Duplex11586539-2 —
9.960 Pre-tin 350642-1 350577-1 1-480277-0
24.39
12 1.200 Pre-tin 350643-1 350578-1 1-480278-0
30.49
15 1.440 Pre-tin 350644-1 350579-1 1-480324-0
36.58
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over
.000050 [.00127] min. nickel underplate on entire contact.
2Other mating connectors include vertical, right-angle and surface mount PC Board pin headers.
3Used by the disk drive industry.
4Surface mount compatible.
5Use standard tail for .062 [1.57] thick PC Board.
6Use long tail for .125 [3.18] thick PC Board.
7Low Mating Force
8High Temperature
Note: All part numbers are RoHS Compliant.
15 14 13
12 11 10
9 8 7
6 5 4
3 2 1
.645
[16.38]
.470
[11.94]
Typ.
Dia. Typ.
.240
[6.09]
.202
[5.13]
.070
[1.78]
Related Product Data
Product Specifications
108-1077 Commercial MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 151-152
Technical Documents—pages 151
and 205-206
Mating Pin Housings—pages 157-160
Mating Pin Headers—pages 161-164
Mating Socket Housings—
pages 157-160
Mating Socket Headers—page 162
Mating IDC—page 163
PC Board Surface Mount
Right-Angle Pin Header
Material and Finish
Housing — Nylon, black color
Flammability Rating — UL94V-2
Contact — Phosphor bronze, pre-tin
Solder tail width .052 [1.32]
A
4 Circuit, In-Line
.200
[5.08]
4 Circuit, In-Line
PC Board Vertical
Socket Headers
Material
Housing — Nylon, natural color
Flammability Rating — UL94V-2
Contacts—Phosphor bronze
Solder tail diameter .062 [1.57]
Recommended PC Board Hole Layout
.062 [1.57] thick PC Board
1234
A
.245
[6.22]
.200
[5.08]
Typ.
.824
[2093]
.440
[11.18] .015
[0.38]
.170
[4.32]
.070
[1.78] Dia. Typ. Typ.
Note: .010 [.25] min. thick solder paste,
63/27 tin
Recommended PC Board Layout
.062 [1.57] thick PC Board
Part Number
770829-1
Notes:
1. Mating parts include socket housings, a
vertical PC Board socket header below and
the insulation displacement connectors (IDC).
2. Used by the disk drive industry.
163
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline
Standard Density
.505
[12.82]
Dust Covers
Material
Housing —Polyester, white color
Flammability Rating — UL94V-2
PC Board Right-Angle
Pin Headers
Material and Finish
Contact — Phosphor bronze, pre-tin
Solder tail width .052 [1.32]
For Feed-To Wiring
Part Number 770232-1
4 Circuit, In-Line
For Feed-Through Wiring
Part Number 770233-1
Wire Size Range Color Finish Part Number Mates with
AWG [mm2] Code UL94V-2 UL94V-0 Part Numbers
22 Red Pre-tin 770156-2 794036-3 1-480426-0**
[.3] 350211-1
20 Yellow Pre-tin 770156-4 794036-2 350211-2
[.5] 350424-1
18 Orange Pre-tin 770156-3 794036-1
350424-2
[.8] 641737-1
16
1-641737-1
770827-1
[1.2] Blue Pre-tin 770156-5* 794036-4 770829-1
770846-1
*Application Tooling: Arbor Tool 91085-2 uses head 231920-2. **Pin Housing
Notes:
1. Insulation diameter .095 [2.41] max.
2. Application Tooling
Power Unit No. 91112-2 (IS 408-7763) uses Head No. 231920-2 (IS 408-9330) and Hand Tool Handle No. 58074-1
(IS 408-6790) uses Terminating Head No. 231894-1(IS 408-3186)
Note: All part numbers are RoHS Compliant.
.994
[25.24]
.325
[8.25] Max.
.142
[3.60] Max.
Max.
.390
[9.90]
.200
[5.08]
.830
[21.08]
Max.
.643
[16.33]
Max.
.760
[19.30]
.760
[19.30]
Insulation Displacement
Connectors (IDC)
Material
Housing — Nylon
Contact — Phosphor bronze
Related Product Data
Used by the disk drive industry.
Product Specifications
108-1077 Commercial MATE-N-LOK
PC Board Headers
108-49000 IDC Connectors
Application Specification
114-49001 IDC Connectors
Performance Characteristics—
pages 151-152
Technical Documents—
pages 151 and 205-206
Mating Socket Housings—
pages 157-160
Mating Pin Housings— pages 157-
160
Mating Pin Headers— pages 161-164
Recommended PC Board Hole Layout
.062 [1.57] thick PC Board
Number of Dimensions Part Mates with
Housing Material Socket Housing
Circuits ABCD Numbers Part Number
2.600 —.300 —UL94V-2 Nylon 794120-1 1-480318-0
15.24 7.62 Natural Color
3.800 .150 .300 .600 UL94V-0 Nylon 643488-1 1-480303-0
20.32 3.81 7.62 15.24
4
UL94V-2 Nylon, 641737-131-480424-02,3
1.000 .200 .400 .800 Natural Color 770846-11,3
25.40 5.08 10.16 20.32 UL94V-0 Nylon 1-641737-13770827-12,3
1Surface Mount Compatible. 2Other mating connectors include a vertical PC Board socket header and the insulation
displacement connectors (IDC). 3Used by the disk drive industry.
.345
[.876]
.400
[10.16]
.100
[2.54]
.100
[2.54]
.484
[12.29]
.140
[3.55] Typ.
Dia.
Dia.
Dia.
.200
[5.08]
Typ.
A
D
B
C
.060
[1.524]
(4 Plcs.)
.100
[2.54]
(2 Plcs.)
.157
[3.98]
(2 Plcs.)
Note: These parts are used with the insulation displacement connectors below.
.142
[3.60]
Max.
Max.
.505
[12.82]
2, 3, and 4 Circuit, In-Line 2, 3, and 4 Circuit
.300
[7.62]
.157
[3.99]
2 Plc.
.060
[1.52]
2 Plc.
.100
[2.54]
2 Plc.
.100
[2.54]
.200
[5.08]
.150
[3.81]
Dia.
Socket Assembly (Plug)
164
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors
.200 [5.08] Centerline Standard Density
PC Board Right-Angle
Pin Header with Fix Belt
Material
Housing — Thermoplastic
Flammability Rating — UL94V-2
Contacts — Copper Alloy
Related Product Data
Used by the disk drive industry
Product Specification
108-5155
.996
[25.30]
.217
[5.50]
.933
[23.70]
.600
[15.24]
.400
[10.16]
.167
[4.23]
.200
[5.08]
.402
[10.20]
.453
[11.50]
.161
[4.10]
.150
[3.80]
.346
[8.80]
.016
[.400] Ref.
432 1
Part No. 174552-1
Notes: Mates with socket housing Part No. 1-480424-0.
Other mating connectors include a vertical PC Board
socket header and the insulation displacement
connectors (IDC).
.933
[23.70]
.209
[5.30]
.215
[5.45]
.600
[15.24]
.400
[10.15]
.167
[4.23]
.200
[5.08]
.091
[2.30]
.059
[1.50]
Recommended PC Board Hole Layout
.062 [1.57] thick PC Board
4 Circuit, In-Line
PC Board Right-Angle
Pin Headers with Fix Belt
Reverse Polarization
Material and Finish
Housing — Nylon
Flammability Rating — UL94V-2
Contacts — Tin plated, Copper alloy
Related Product Data
Used by the disk drive industry
Product Specification
108-5155
.996
[25.30]
.217
[5.50]
Ref.
.933
[23.70]
.600
[15.24]
.400
[10.16]
.167
[4.23]
.933
[23.70]
.200
[5.08]
.600
[15.24]
.167
[4.23]
.200
[5.08]
.400
[10.16]
.090
[2.30]
2 Plcs. .059
[1.50]
4 Plcs.
.215
[5.45]
.209
[5.30]
.402
[10.20]
.453
[11.50]
.161
[4.10]
.512
[13.00]
.362
[9.20]
.346
[8.80]
.016
[.400] Ref.
ARef.*
432 1
Part No. 174804*
Recommended PC Board Hole Layout
.062 [1.57] thick PC Board
Notes: Mates with socket housing Part No. 1-480424-0. Other mating connectors include a vertical PC Board socket
header and the insulation displacement connectors (IDC).
Part No. A Dim.* Description
174804-1 .150 Long Clamp
3.80 with Kink
4 Circuit, In-Line
Note: All part numbers are RoHS Compliant.
165
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.140 MATE-N-LOK Connectors (Large Insulation), .240 Centerline
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
.140 MATE-N-LOK Connectors (Large Insulation)
.240 [6.10] Centerline
Maximum Current—Maximum cur-
rent rating of .140 MATE-N-LOK
Connectors is limited by the maximum
operating temperature of the housings
which is 105°C and the temperature rise
of the contacts which is 30°C. There are
several variables which have a direct
effect on this maximum current-carrying
capability for a given connector and
must be considered for each application.
These variables are:
Wire Size—Larger diameter wire will
carry more current since it has less inter-
nal resistance to current flow and thus
generates less heat. Longer wire lengths
also enhance current-carrying capabili-
ties since the wire conducts heat away
from the connector.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Technical Documents
Product Specification
108-1032 .140 Diameter
MATE-N-LOK Connectors
Application Specification
114-1007 .140 Diameter
MATE-N-LOK Contacts
Termination Contact
Resistance Crimp
Wire Size Test Resistance Tensile Force
AWG mm2Current Milliohms Force (Min.)
(Amps) (Max. Init.) lbs. N
20 .5 4.5 3.0 20 89
18 .8 6 2.5 30 133
16 1.2 8 2.5 45 200
14 2.0 10 2.0 50 222
12 3.0 12 1.5 60 267
10 5.0 14 1.5 65 289
Note: This is the total resistance between wire crimps of a mated pin and socket.
Product Facts
■Available in 2, 3 and 9
circuit configurations for
panel mounting; 4 and 9
circuit configurations for
free-hanging applications
■Standard natural nylon
housings
■Housings fully polarized
■Contacts fully protected in
housings
■Contacts accept wire
size range 20-10 AWG
[.5-5.0 mm2] with insulation
diameters from .100 [2.54]
to .180 [4.57]
■Low insertion/extraction
forces
■Dual locking lances provide
optimum contact stability
■Extraction tool removes both
pins and sockets
■Contacts are on .240 [6.09]
centerline spacing
■Not for interrupting current
■Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards Association,
File No. LR 7189A
Performance Characteristics
The .140 MATE-N-LOK Connector per-
formance characteristics found on this
page are based on free-hanging and
panel mount connectors, loaded with
contacts crimped on stranded wire.
Dielectric Withstand Voltage—
3.0 KVAC between adjacent circuits
Insulation Resistance—
1000 megohms minimum initial between
adjacent circuits
Voltage Rating—600 V AC or DC
Connector Mating—4.5 lb. max. per
circuit
Connector Unmating—.8 lb. min. per
circuit
Contact Retention—30 lb. min.
Durability—25 cycles, mating and
unmating
Thermal Shock— -55°C to +85°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Current Rating Verification for 30°C Maximum Temperature Rise
100% Energized
Wire-to-Wire
.140 MATE-N-LOK Connector Calculated Current Table
Number of Wire AWG
Circuits 10 12 14 16 18 20
2 28.00 23.00 18.50 15.00 13.50 10.50
3 25.00 21.00 17.00 13.50 12.00 9.50
9 18.50 15.00 12.00 10.00 9.00 7.00
Values are based on initial Temperature Rise versus Current Testing and are
intended to be a guide in the selection of a connector family. All applications
should be tested by the end user. The values listed are per circuit for fully
loaded housings being 100% energized. Note: All combinations were not
tested, and this chart contains interpolated and extrapolated values.
Minimum Wire Lengths for T-Rise vs. Current Testing
Note: If wire lengths used are less than those listed, the current carrying
ability of the system will be reduced due to less heat being conducted away
from the connector. The customer should fully test all applications.
R
R
166
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.140 MATE-N-LOK Connectors (Large Insulation), .240 Centerline (Continued)
AMP
Soft Shell
Pin and Socket Connectors
.140 MATE-N-LOK Connectors (Large Insulation)
.240 [6.10] Centerline Standard Density
Socket Housing (Plug)
Part No. 1-480585-0
Socket Housing (Plug)
Part No. 1-480510-0
Pin Housing (Cap)
Part No. 1-480586-0
Pin Housing (Cap)
Part No. 1-480512-0
Part No. 794700-1 (Black Color High Temp.)
Contacts
Pin diameter .140 [3.57]
Stock thickness .014 [.357]
Related Product Data
Product Specification
108-1032 .140 Diameter
MATE-N-LOK Connectors
Application Specification
114-1007 .140 Diameter
MATE-N-LOK Contacts
Performance Characteristics—
page 159
Keying Plug— none
Housings— pages 166-167
Technical Documents— pages 165
and 205-206
Application Tooling— pages 207-210
Housings
Free-Hanging
.240 [6.09] Centerline spacing
Material
Nylon, natural color
Flammability Rating — UL94V-2
Cavity Identification
(Rear View)
Pin
Cap
Cap
Plug
Plug
Socket
9 Circuit, Matrix
4 Circuit
Wire Size Ins. Dia.
Contact Part Numbers HDM Hand Tool
Range Range Material & Finish Pin Socket Applicator Part No.
AWG [mm2]Strip Form Loose Piece Strip Form Loose Piece Part No.
20-14 .100-.180 Brass. pre-tin 61627-1 350389-1 61626-1 350388-1 567306-1
567306-2 90247-1
[.5-2.0] 2.54-4.5 Phos. Brz., pre-tin 61627-2 — 61626-2 — 567306-3
14-10 .100-.180 Brass. pre-tin 350201-1 350391-1 350200-1 350390-1 567309-1
567309-2 69710-12
[2.0-5.0] 2.54-4.5 Phos. Brz., pre-tin 350201-2 350391-2 350200-2 350390-2 567309-3
1HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used
on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for
further information.
2Hand Tool No. 69710-1 uses die set No. 58374-1 for 14-12 AWG and No. 58373-1 for 10 AWG.
.995
[25.27]
1.130
[28.70]
1.065
[27.05]
.865
[21.97]
1.130
[28.70]
.755
[19.17]
.755
[19.17]
.755
[19.17]
.845
[21.46]
.845
[21.46]
.240
[6.09]
.240
[6.09]
.240
[6.09]
.240
[6.09]
1.180
[29.97]
.775
[19.68]
.580
[14.73]
.950
[24.13]
.950
[24.13]
1.350
[34.29]
.565
[14.35]
.795
[20.19]
Note: All part numbers are RoHS Compliant.
Contact Extraction Tool
Part No. 318845-1
IS 408-4378
167
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.140 MATE-N-LOK Connectors (Large Insulation), .240 Centerline (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
.140 MATE-N-LOK Connectors (Large Insulation)
.240 [6.10] Centerline
Housings
Panel Mount
.240 [6.09] Centerline spacing
Material
Housing — Nylon, natural color
Flammability Rating — UL94V-2
Cavity Identification
(Rear View)
Socket Housing (Plug)
Part No. 1-480672-0
Part No. 1586305-1 (Black Color High Temp.)
Pin Housing (Cap)
Part No. 1-480673-0
Part No. 794683-1 (Black Color High Temp.)
Plug
Plug
Plug
Cap
Cap
Cap
Related Product Data
Product Specification
108-1032 .140 Diameter
MATE-N-LOK Connectors
Application Specification
114-1007 .140 Diameter
MATE-N-LOK Contacts
Performance Characteristics—
page 165
Keying Plug— none
Contacts— page 166
Technical Documents— pages 165
and 205-206
Notes:
1. Panel thickness .040-.070
[1.02-1.78].
2. "X" and "Y" dimensions must
be within .005 [.127] of each
other.
3. Panel should be punched so
that the housing enters the
panel in the same direction as
the punch for ease of assembly.
12 Circuit-.725 [18.42]
3 Circuit- .965 [24.51]
2.050 x .050 [1.27-1.27] tabs in corners of
outlet are optional to reduce housing
float in panel.
.515
[13.08]
.950
[24.13]
.950
[24.13]
.950
[24.13]
.950
[24.13]
.910
[23.11]
.755
[19.17]
.755
[19.17]
.765
[19.43]
.765
[19.43]
.755
[19.17]
.755
[19.17]
.815
[20.70]
.275
[6.98]
.275
[6.98]
1.055
[26.79]
1.205
[26.79]
.240
[6.09]
.240
[6.09]
.240
[6.09]
.240
[6.09]
.288
[7.31]
.0502
[1.27]
.0502
[1.27]
1.025
[26.03]
1.025
[26.03]
.475
[12.06]
.910
[23.11]
.190
[4.82]
.190
[4.82]
.240
[6.09]
.240
[6.09]
.965
[24.51]
.365
[9.27]
.365
[9.27]
1.130
[28.70]
1.130
[28.70]
1.130
[28.70]
.515
[13.08]
C1
X
X
Y
Recommended Panel Cutouts
View is from housing entry side
9 Circuit, Matrix
2 and 3 Circuit 9 Circuit
Note: All part numbers are RoHS Compliant.
Socket Housing (Plug)
Part No. 1-350344-0
Part No. 794699-1 (Black Color High Temp.)
Pin Housing (Cap)
Part No. 1-350345-0
Part No. 1586305-1 (Black Color High Temp.)
2 and 3 Circuit, In-Line
Socket Housing (Plug)
Part No. 1-350346-0
Pin Housing (Cap)
Part No. 1-350347-0
Part No. 794061-1 (Black Color High Temp.)
168
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Engineering Notes
AMP
Soft Shell
Pin and Socket Connectors
169
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Standard Density
Performance Characteristics
The Universal MATE-N-LOK Connector
performance characteristics found on
pages 169-170 are based on free-hanging
and panel mount connectors, loaded
with contacts crimped on stranded wire.
Dielectric Withstanding Voltage—
5.0 KVAC or 5.0 KVDC between
adjacent circuits
Insulation Resistance—
1000 megohms minimum initial between
adjacent circuits
Voltage Rating—600 V AC or DC
Contact Insertion Force—
5.0 lb. max. per contact
Contact Retention—15 lb. min.
per contact
Durability—50 cycles, mating and
unmating
Product Facts
■Pins and sockets can be
intermixed in the same
housing
■Positive polarization
■Rear cavity identification
■Contacts completely
enclosed in housings
■Positive locking housings
■Insulation capability to .200
[5.08] diameter
■Removable, crimp snap-in
contacts
■Low contact mating force
■Contacts accept 30-10 AWG
[.05-5.0 mm2] wire sizes
■Contacts available with pre-
tin or gold plating
■Dual locking lances provide
optimum contact stability
■Panel mount or free-hanging
■Mate with Universal
MATE-N-LOK II Housings
■Available in UL 94V-O flame
retardant material. Meets
the material requirements of
table 25.1 of U.L. Standard
1410 (television receivers
and video products)
■Not for interrupting current
■Harness to PC Board capa-
bility using pin or socket
headers
■Pin and socket headers are
available in both vertical and
right-angle style
■Solderability — headers meet
MIL-STD 202 Method 208
■Contacts are on .250 [6.35]
centerline spacing
■Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
■Certified by Canadian
Standards Association,
File No. LR 7189
■Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
R
R
Technical Documents
Product Specifications
108-1031 Universal MATE-N-LOK
Connectors
108-1053 Universal MATE-N-LOK
PC Board Headers
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Instruction Sheet
408-7714 Plug, Cap, Headers, Pin,
Socket and Accessories
170
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline Standard Density
Performance
Characteristics (Continued)
Maximum Current—Maximum cur-
rent rating of Universal MATE-N-LOK
connectors is limited by the maximum
operating temperature of the housings
which is 125°C for 94V-2 housings and
120°C for 94V-0 housings including the
temperature rise of the contacts which is
a maximum of 30°C. There are several
variables which have a direct effect on
this maximum current-carrying capabil-
ity for a given connector and must be
considered for each application. These
variables are:
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current carrying
capabilities since the wire conducts heat
away from the connector.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Printed Wiring Board Conductor
Size—The finished trace conductor
width and thickness should be maxi-
mized to allow for the greatest current
carrying capacity and heat dissipation.
Universal MATE-N-LOK connectors also
will withstand the following tests:
Vibration—10-55-10 cycles per
minute at .06 inch total excursion
Physical Shock—18 drops, 50 G
sawtooth at 10 milliseconds
Housing Panel Retention—
75 lb. min.
Housing Lock Strength—30 lb. min.
Thermal Shock— -55°C to +85°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Corrosion—48 hr. at 5% salt
concentration
Related Product Data
Product Specifications
108-1031 Universal MATE-N-LOK
Connectors
108-1053 Universal MATE-N-LOK
Headers
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
Wire-to-Wire
Calculated Current Table
Number of Wire Gauge
Circuits 10 12 14 16 18 20 22 24 26 30
2 19.00 18.00 17.00 14.50 13.00 10.00 8.00 6.50 5.50 3.50
3 17.50 16.50 15.50 13.00 12.00 9.00 7.50 6.00 5.00 3.00
4 16.50 15.50 15.00 12.50 11.00 8.50 7.00 5.50 4.50 3.00
5 16.00 15.00 14.00 12.00 10.50 8.00 6.50 5.50 4.50 3.00
6 In-Line 15.50 14.50 13.50 11.50 10.00 8.00 6.50 5.00 4.00 2.50
6 Matrix 15.00 14.00 13.00 11.00 9.50 7.50 6.00 5.00 4.00 2.50
8 14.50 14.00 13.00 10.50 9.50 7.50 6.00 5.00 4.00 2.50
9 13.50 12.50 11.50 9.50 8.50 6.50 5.50 4.50 3.50 2.00
10 14.00 13.00 12.50 10.00 9.00 7.00 5.50 4.50 3.50 2.50
12 12.50 12.00 11.00 9.00 8.00 6.00 5.00 4.00 3.00 2.00
15 12.00 11.50 10.00 8.50 7.50 6.00 4.50 4.00 3.00 2.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection
of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully
loaded housings being 100% energized. Note: All combinations were not tested, and this chart contains interpolated
and extrapolated values.
Minimum Wire Lengths for T-Rise vs. Current Testing
AWG Min. Length (in.) AWG Min. Length (in.)
30 2.6 18 9.4
28 3.2 16 11.3
26 4.1 14 13.7
24 5.1 12 16.4
20 7.8 10 19.3
Note: If wire lengths used are less than those listed above, the current
carrying ability of the system will be reduced due to less heat being
conducted away from the connector. The customer should fully test
all applications.
Termination Contact
Resistance Crimp
Wire Size Test Resistance Tensile Force
AWG mm2Current Milliohms Force (Min.)
(Amps) (Max. Init.) lbs. N
30 .05 —— 2 9
28 .08 —— 313
26 .12 —— 627
24 .2 1.5 3.50 8 36
22 .3 3 3.50 14 62
20 .5 4.5 3.00 14 62
18 .8 6 3.00 30 133
16 1.2 8 2.75 45 200
14 2.0 10 2.75 50 222
12 3.0 —— 60 267
10 5.0 —— 70 311
Note: This is the total resistance between wire crimps of a mated pin and socket.
Wire-to-Board
Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a
separate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire charts
may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For vertical
headers, only 95% of the Wire-to-Wire value should be used. For right-angle headers, only 75% of the Wire-to-Wire
value should be used. The chart values are only a tool for connector selection and will require the customer to fully
test their application.
Termination Resistance/Contact Crimp Tensile Force
171
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Standard Density
Universal MATE-N-LOK Connector Mating Combinations
Connector Part Number7Mating Connector Part Number
PC Board Headers7
Number Flammability Plug Cap Vertical Pin2Vertical Socket2Right-Angle2
of Style Part Part Plating Standard Standard Long Standard Standard Long
Circuits Rating Number2Number2Tail Tail Pin Socket
Tail Polarized Tail Tail Polarized Tail
1UL94V-2 — 1-350867-0 770421-1 ————— — — — —
UL94V-0 — 350865-1 350866-1 ————— — — — —
UL94V-2 In-Line 1-480698-0 1-480699-0 Pre-tin 350428-1 641963-1 350582-1 350759-4 643411-1 350986-4 ——
794814-13794815-13Duplex1350428-4 641963-3 350582-4 350759-5 ————
2Pre-tin 350786-1 641964-1 350787-1 350824-1 643412-1 350831-1 1-350942-0 643226-1
UL94V-0 In-Line 350777-1 350778-1 1-641964-15
Duplex1350786-3 641964-3 350787-3 350824-4 643412-3 — 3-350942-0 —
UL94V-2 In-Line61-480700-0 1-480701-0 Pre-tin 350429-1 641965-1 350583-1 350760-4 643413-1 350987-4 ——
794901-13794900-13Duplex1350429-4 — 350583-4 350760-5 ————
3Pre-tin 350789-1 641966-1 350790-1 350825-1 643414-1 350832-1 1-350943-0 643228-1
UL94V-0 In-Line 350766-1 350767-1 1-641966-14
Duplex1350789-3 — 350790-3 350825-4 643414-3 350832-4 3-350943-0 3-643228-0
UL94V-2 In-Line 1-480702-0 1-480703-0 Pre-tin 350430-1 641967-1 350584-1 350761-4 643415-1 350988-4 1-350948-0 —
4794899-13794707-13Duplex1350430-4 — 350584-4 350761-5 — 350988-5 ——
UL94V-0 In-Line 350779-1 350780-1 Pre-tin 350792-1 641968-1 350793-1 350826-1 643416-1 350833-1 1-350944-0 643230-1
Duplex1350792-3 — 350793-3 350826-4 — 350833-4 3-350944-0 3-643230-0
UL94V-2 In-Line 1-480763-0 1-480764-03Pre-tin 640466-1 643405-1 — 640467-1 ——1-350949-0 —
5794863-13Duplex1640466-3 ——640467-3 ————
UL94V-0 In-Line 350809-1 350810-1 Pre-tin 640900-1 643406-1 — 640901-1 ——1-350945-0 643232-1
Duplex1640900-3 ——640901-3 ——3-350945-0 3-643232-0
UL94V-2 In-Line 640585-1 926307-1 Pre-tin 641832-1 643407-1 —— — — 640587-1 —
Duplex1641832-3 ——— — — — —
UL94V-0 In-Line 640581-1 926307-3 Pre-tin 641831-1 643408-1 — 770262-1 ——640583-1 643234-1
6Duplex1641831-3 ——770262-3 ——640583-3 3-643234-0
1-480704-0 1-480705-0 Pre-tin 350431-1 641969-1 350585-1 350762-4 643423-1 350989-4 ——
UL94V-2 Matrix6794535-13
794096-15794536-13Duplex1350431-4 — 350585-4 350762-5 — 350989-5 ——
UL94V-0 Matrix 350715-1 350781-1 Pre-tin 350711-1 641970-1 350732-1 350827-1 643424-1 350834-1 ——
Duplex1350711-4 641970-3 350732-4 350827-4 643424-3 350834-4 ——
UL94V-2 In-Line 640586-1 926308-1 Pre-tin 641825-1 — 770143-1 —— ———
8Duplex1———— — — — —
UL94V-0 In-Line 640582-1 926308-3 Pre-tin 641828-1 643410-1 —— — —640584-1 643236-1
Duplex1— 643410-3 —— — —640584-3 3-643236-0
UL94V-2 Matrix 1-480706-0 1-480707-0 Pre-tin 350432-1 641971-1 350586-1 350763-4 643425-1 350990-4 ——
794537-13794538-13Duplex1350432-4 641971-3 350586-4 350763-5 — 350990-5 ——
9Pre-tin 350712-1 641972-1 350742-1 350828-1 643426-1 350835-1 ——
UL94V-0 Matrix 350720-1 350782-1 1-641972-14
Duplex1350712-4 641972-3 350742-4 350828-4 643426-3 350835-4 ——
UL94V-2 In-Line 926302-1 926309-1 Pre-tin ———— — — — —
10 Duplex1———— — — — —
UL94V-0 In-Line 926302-3 926309-3 Pre-tin ———— — — — —
Duplex1———— — — — —
UL94V-2 Matrix 1-480708-0 1-480709-0 Pre-tin 350433-1 641973-1 350587-1 350764-4 — 350991-4 ——
794851-13794727-13Duplex1350433-4 — 350587-4 350764-5 — 350991-5 ——
12 Pre-tin 350713-1 641974-1 350737-1 350829-1 643428-1 350836-1 ——
UL94V-0 Matrix 350735-1 350783-1 1-641974-14
Duplex1350713-4 641974-3 350737-4 350829-4 — 350836-4 ——
UL94V-26Matrix 1-480710-0 1-480711-0 Pre-tin 350434-1 641975-1 350588-1 350765-4 643429-1 350992-4 ——
15 794546-13794545-13Duplex1350434-4 — 350588-4 350765-5 ————
UL94V-0 Matrix 350736-1 350784-1 Pre-tin 350714-1 641976-1 350738-1 350830-1 643430-1 350837-1 ——
Duplex1350714-4 641976-4 350738-4 350830-4 — 350837-4 ——
Note: All part numbers are RoHS Compliant.
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area,
matte tin on solder tail end over .000050 [.00127] min. nickel underplate
on entire contact.
2Universal MATE-N-LOK Plug and Cap housings accept pin or socket con-
tacts. Use the appropriate contacts in the Plug housing as required by the
mating component.
3Housing material has 125°C temperature rating.
4Black in color.
5Tool Removable
6UV Resistant housing material available.
7European glow wire housing material available.
172
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline Standard Density
Contacts
Solid pin diameter .084 [2.13]
Stock thickness .012 [.305] unless
otherwise noted.
These contacts can be used in either
Universal MATE-N-LOK Plug or Cap
housings only.
Wire Size Ins. Dia. L Dim. Contact Part Numbers HDM Hand Tool
Range Range Pin Socket Material & Finish Pin Socket Applicator Part No.
AWG [mm2]Strip Form Loose Piece Strip Form Loose Piece Part No.
30-26 .032-.057 .790 .760 Brass, Pre-tin 350924-1 770672-1 350925-1 770673-1 466616-2658439-1
[.05-.12] .813-1.45 20.06 19.30 Phos. Brz., Gold2350924-6 770672-6 350925-6 — 466616-36
Brass, Pre-tin 350561-1 350690-1 350851-1 350689-11
350570-11
Brass, Gold2350561-2 350690-2 350851-2 640347-2
466320-16
24-18 .040-.100 .790 .760 350570-21350689-21466320-2691510-1
[.2-.8] 1.02-2.54 20.06 19.30 Brass, Select Gold3350561-7 350690-7 350851-7 350689-71466320-46
350570-71
Phos. Brz., Pre-tin 350561-3 350690-3 350570-31350689-31
Phos. Brz., Select Gold3——350570-61—
Brass, Pre-tin 350218-1 350547-1 350536-1 350550-1
20-14 .060-.130 .790 .760 Brass, Gold2350218-2 350547-2 350536-2 350550-2 687763-16
[.5-2.0] 1.52-3.30 20.06 19.30 Brass, Select Gold3350218-7 350547-7 350536-7 350550-7 687763-2691500-1
Phos. Brz., Pre-tin 350218-3 350547-3 350536-3 350550-3 687763-66
Phos. Brz., Select Gold3350218-6 350547-6 350536-6 350550-6
20-14 Brass, Pre-tin 350538-1 350552-1 350537-1 350551-1
[.5-2.0] .130-.200 .810 .780 Brass, Gold2350538-2 350552-2 350537-2 350551-2 687926-1691508-17
or 3.30-5.08 20.57 19.81 Brass, Select Gold3350538-7 350552-7 350537-7 350551-7 687926-2691506-17
2@18 Phos. Brz., Pre-tin 350538-3 350552-3 350537-3 350551-3 687926-66
[.8] Phos. Brz., Select Gold3350538-6 350552-6 350537-6 350551-6
18-144.130-.200 .810 .780 Brass, Pre-tin 350873-1 — 350874-1 — 466588-1691508-17
466588-26
[.8-2.0] 3.30-5.08 20.57 19.81 Phos. Brz., Pre-tin 350873-3 350918-3 350874-3 350919-3 466588-3691506-17
12-10 .200 max.5.810 .780 Phos. Brz., Pre-tin 350922-3 640309-3 350923-3 640310-3 466597-16
[3.0-5.0] 5.08 20.57 19.81 Phos. Brz., Select Gold3350922-6 640309-6 350923-6 640310-6
466597-2669710-17
466597-36
1Socket Contact — .010 [.254] stock thickness
2Gold Finish — Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact.
3Select Gold Finish — Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact.
4Recommended for predominant use of 14 AWG wire.
5There is no insulation barrel on this contact. Insulation maximum diameter is limited by the housing.
6HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K
Machine, -3, -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information.
7Hand Tool No. 91508-1 is for wire size 20-18 AWG. Hand Tool No. 91506-1 is for wire size 16-14 AWG. Hand Tool No. 69710-1 use die set No. 58380-1 for 12
AWG and No. 58380-2 for 10 AWG.
Note: Phosphor bronze material contacts should be used in high temperature/humidity cycling applications.
Note: All part numbers are RoHS Compliant.
Related Product Data
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Performance Characteristics—
pages 169-170
Technical Documents— pages 169 and
205-206
Application Tooling— pages 207-210
Housings—page 174
Contact Insertion Tool
(For inserting contacts applied
to small diameter wire)
Part No. 91002-1
IS 408-7347
Solid Pin Socket
Contact Extraction Tool
Part No. 318851-1
IS 408-4371
Contact Retention Test Tool
Part No. 1586701-1
IS 408-10003
173
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Standard Density
Contacts
Split pin diameter .086 [2.18]
Stock thickness .012 [.305]
These contacts can be used in either
Universal MATE-N-LOK Plug or Cap
housings only.
Related Product Data
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Performance Characteristics—
pages 169-170
Technical Documents— pages 169
and 205-206
Application Tooling— pages 207-210
Housings—page 174
Split Pins
Wire Size Range Ins. Dia. L Contact Part Number HDM Hand Tool
AWG [mm2] Range Dim. Material & Finish Applicator Part No.
Strip Form Loose Piece Part No.
24-18 .040-.100 .790
Brass, Pre-tin 350699-1 350706-1 466320-13
[.2-.8] 1.02-2.54 20.06 Brass, Gold1350699-2 350706-2 466320-2391510-1
Brass, Select Gold2350699-7 350706-7 466320-43
20-14 .060-.130 .790
Brass, Pre-tin 350687-1 350705-1 687763-13
[.5-2.0] 1.52-3.30 20.06 Brass, Gold1350687-2 350705-2 687763-2391500-1
Brass, Select Gold2350687-7 350705-7 687763-63
.130-.200 .810
Brass, Pre-tin 350700-1 350707-1 687926-1391508-14
3.30-5.08 20.57 Brass, Gold1350700-2 350707-2 687926-2391506-14
Brass, Select Gold2350700-7 350707-7 687926-63
1Gold Finish — Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127]
min. nickel underplate on entire contact.
2Select Gold Finish — Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel
underplate on entire contact.
3HDM Applicator part number ending in -1, is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is
used on AMP-O-LECTRIC Model K Machine, -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See
pages 207-210 for further information.
4Hand Tool No. 91508-1 for wire size 20-18 AWG. Hand Tool No. 91506-1 for wire size 16-14 AWG.
Notes:
1. Split pins recommended for use in housings having 6, 9, 12 and 15 circuits to reduce mating force.
2. Phosphor bronze material contacts are available for use in high temperature/humidity cycling applications,
consult Tyco Electronics.
Note: This contact will accept a 110
Series FASTON Receptacle — Part
No. 350871-1 (strip form) allowing
simple field wiring or wiring changes.
Grounding Pins
(.100 [2.54] longer than standard pin)
(Mate first, break last, not for interrupting
current)
Wire Size Range Ins. Dia. L Contact Part Number HDM Hand Tool
AWG [mm2] Range Dim. Material & Finish Applicator Part No.
Strip Form Loose Piece Part No.
24-18 .060-.130 .890 Brass, Pre-tin 770210-1 — 567216-22—
[.2-.8] 1.52-3.30 22.60 567216-32
20-14 .060-.130 .890 687763-12
Brass, Pre-tin 350654-1 350669-1 687763-2291500-1
[.5-2.0] 1.52-3.30 22.60 687763-62
466597-12
12-10 .200 max.1.910 Phos. Brz., Pre-tin 770234-3 — 466597-22—
[3.0-5.0] 5.08 23.11 466597-32
1There is no insulation barrel on this contact. Insulation maximum diameter is limited by the housing.
2HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is
used on AMP-O-LECTRIC Model K Machine, -3 & -6 are used on AMP-O-LECTRIC Model G Machine. See pages
207-210 for further information.
Programmable Connector
Contact
(Socket with 110 Series Special
FASTON Tab)
Material and Finish
Brass, pre-tin
.805
[20.45]
.048
[1.22] Dia.
Part Number
350877-1
20-14
[.5-2.0]
or
2@18 [.8]
Note: All part numbers are RoHS Compliant.
174
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline Standard Density
Housings
Free-Hanging or Panel Mount
.250 [6.35] Centerline spacing
2, 3, 4, 5, 6, 8 and 10
Circuit, In-Line
6 Circuit, Matrix
9, 12 and 15 Circuit,
Matrix
Number of A Housing Part Numbers
UL94V-2 Nylon, Natural Color2UL94V-0 Nylon3
Circuits Dim. Plug Cap Plug Cap
1—1-350867-0 770421-1 350865-1 350866-1
2.550 1-480698-011-480699-01350777-11350778-11
13.97
3.800 1-480700-011-480701-01350766-11350767-11
20.32
41.050 1-480702-011-480703-01350779-11350780-11
26.67
51.300 1-480763-011-480764-01350809-11350810-11
33.02
1.550 640585-11926307-11640581-11926307-31
39.37
6
—1-480704-0 1-480705-0 350715-1 350781-1
794096-14
82.050 640586-11926308-11640582-11926308-31
52.07
9.800 1-480706-0 1-480707-0 350720-1 350782-1
20.32
10 2.550 926302-11926309-11926302-31926309-31
64.77
12 1.050 1-480708-0 1-480709-0 350735-1 350783-1
26.67
15 1.300 1-480710-0 1-480711-0 350736-1 350784-1
33.02
1In-Line style.
2Housing material has 125°C temperature rating.
3Housing material has 120°C temperature rating.
4Tool Removable.
Related Product Data
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Performance Characteristics—
pages 169-170
Contacts—pages 172-173
Panel Cutout
Recommendations— page 175
Keying Plug— page 175
Strain Reliefs— pages 175-176
Technical Documents— pages 169
and 205-206
Mating Headers—pages 182-183
and 185
Other Mating Connectors
Universal MATE-N-LOK II Housings—
pages 193-194
Note: See charts on page 182 to
order Plug and Cap Housings in
colors.
.580
[14.73]
.300
[7.62] 1.080
[27.43]
.460
[11.68] 1.080
[27.43]
.300
[7.62] .620
[15.75]
1.080
[27.43]
1.080
[27.43]
.550
[13.97]
.550
[13.97]
.460
[11.68] 1.080
[27.43]
.800
[20.32]
1.120
[28.45]
.290
[7.37]
.290
[7.37] 1.080
[27.43]
.460
[11.68]
1.080
[27.43]
.380
[9.65]
.380
[9.65]
.800
[20.32]
1.080
[27.43]
1.080
[27.43]
.460
[11.68] 1.080
[27.43]
.800
[20.32]
1.120
[28.45]
Plug
Cap
Plug
Plug
Plug Cap
Cap
Cap
1 Circuit, Free-Hanging
Note: All part numbers are RoHS Compliant.
175
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Standard Density
Keying Plugs
IS 408-3320
Plug Housing
Strain Reliefs
IS 408-3320
Related Product Data
Plug Housings— page 174
Technical Documents— pages 169
and 205-206
Number of Dimensions
Style Circuits ABCDE
2.565 .340 .095 .530 .250
14.35 8.64 2.41 13.46 6.35
3.815 .340 .095 .530 .250
20.70 8.64 2.41 13.46 6.35
41.065 .340 .095 .530 .250
27.05 8.64 2.41 13.46 6.35
In-Line 51.315 .340 .095 .530 .250
33.40 8.64 2.41 13.46 6.35
61.567 .154 .189 .531 .394
39.80 3.91 4.80 13.49 10.0
82.067 .154 .189 .531 .394
52.50 3.91 4.80 13.49 10.0
10 2.567 .154 .189 .530 .394
65.20 3.91 4.80 13.46 10.0
6.565 .480 .275 1.030 .250
14.35 12.19 6.99 26.16 6.35
9.815 .480 .275 1.030 .250
Matrix 20.70 12.19 6.99 26.16 6.35
12 1.065 .480 .275 1.030 .350
27.05 12.19 6.99 26.16 8.89
15 1.315 .480 .275 1.030 .350
33.40 12.19 6.99 26.16 8.89
Part Numbers
UL94V-2 Nylon material, natural color — 1-350589-0
UL94V-0 Nylon material — 350811-1
2, 3, 4, 5, 6 and 8 Circuit, In-Line 6, 9, 12 and 15 Circuit, Matrix
Part Numbers
UL94V-2 Nylon material, natural color — 1-350590-0
UL94V-0 Nylon material — 350812-1
Part Numbers
UL94V-2 Nylon material, natural color — 1-640415-1
UL94V-0 Nylon material — 1-640415-0
Note: Keying plug snaps into plug or cap housing
Recommended
Cap Housing
Panel Cutouts
View is from cap entry side
Refer to Application Specification
114-1010
Notes:
1. Recommended panel thickness — .030-.090 [.762-2.286]. Panel must be punched so that housing enters panel in
same direction as the punch.
2. Optional — Do not remove this material when keying cap housing to panel.
3. Circuit #1 location when using panel keying with 6, 9, 12 and 15 circuit Matrix housings.
4. Circuit #1 location when using panel keying with 2, 3, 4, 5, 6, 8 and 10 circuit In-Line housings.
5. .175 [4.45] dimension is .125 [3.18] for 6, 8 and 10 circuit In-Line housings.
1.375
[34.93]
.530
[13.46]
.600
[15.24]
2 Req’d/Assy.
See Note
Wire Bundle Dia.—
.312
[7.92]
(2) #6x5 ⁄ 8 Lg Type B
Pan head sheet
metal screws
(not supplied)
(2) #6x5 ⁄ 8 Lg Type B
Pan head sheet
metal screws
(not supplied) .530
[13.46]
.600
[15.24]
1.375
[34.93]
2 Req’d/Assy.
See Note
Wire Bundle Dia.—
.500
[12.7]
Max.
Max.
Note: Strain relief part number represents one half of a strain relief. Two strain reliefs required per housing.
Note: All part numbers are RoHS Compliant.
176
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline Standard Density
Plug or
Cap Housing
Strain Reliefs
IS 408-3320
Related Product Data
Housings— page 174
Technical Documents— pages 169
and 205-206
Number of A Insert Single Wire Wire Bundle Part Numbers
Style Circuits Dim. Supplied Dia. Range Dia. Range UL94V-2 Nylon, UL94V-0 Nylon
Natural Color
Yes .040-.190 — 1-640719-0 640713-1
.960 1.02-4.83
224.38 No — .200-.350 1-640719-1 640713-2
5.08-8.89
Yes .040-.190 — 1-640720-0 640714-1
1.140 1.02-4.83
328.96 No — .200-.350 641763-1 641945-1
5.08-8.89
Yes .040-.190 — 641775-1 641776-1
1.325 1.02-4.83
In-Line
433.65 No — .200-.350 641775-2 641776-2
5.08-8.89
Yes .040-.190 — 643030-3 643030-1
1.530 1.02-4.83
538.86 No — .200-.350 643030-2 643030-4
5.08-8.89
Yes .040-.190 — 643585-1 643313-1
1.780 1.02-4.83
645.21 No — .200-.350 643585-2 643313-2
Note 5 5.08-8.89
Yes .040-.190 ——643314-1
2.280 1.02-4.83
856.08 No — .200-.350 — 643314-2
Note 5 5.08-8.89
61.030 Yes — .120-.650 1-640721-0 640715-1
26.16 3.05-16.51
91.030 Yes — .120-.650 1-640722-0 640716-1
26.16 3.05-16.51
Matrix
12 1.280 Yes — .150-.750 1-640723-0 640717-1
32.51 3.81-19.05
15 1.530 Yes — .200-.850 1-640724-0 640718-1
38.86 5.08-21.59
Notes:
1. Cable clamping insert comes attached to strain relief. It can be used to provide additional adjustment for small wire
bundles or discarded.
2. Insert to be positioned as shown by dotted lines.
3. Strain relief part number represents one-half of a strain relief. Two strain reliefs required per housing.
4. Must use cap housing adapters when attaching strain reliefs to a cap housing. Two adapters required per housing.
5. Strain reliefs for 6 and 8 circuit In-Line fits plug housings only.
Cap Housing Adapters
These adapters are designed to anchor
the cap housing strain reliefs to the
housings and prevent the strain relief
halves from “drawing in” when the
screws are being torqued down to clamp
the cable.
IS 408-3320
2, 3, 4, 5, 6, 8, 9,
12 and 15 Circuit
(Enclosed)
For All Positions Except 2, 6
and 8 Circuit Cap Housings
For 2 In-Line and 6 Matrix
Circuit Cap Housings Only
UL94V-2 Nylon material,
natural color — 641777-1
UL94V-0 Nylon material—
641778-1
UL94V-2 Nylon material,
natural color — 643182-1
UL94V-0 Nylon material—
643182-2
1.300
[33.02] 1.300
[33.02]
.480
[12.19]
.630
[16.0]
In-Line Matrix
(2) #6x3/8 Lg Type B
Pan head sheet metal
screws (not supplied)
2 Req’d/Assy.
Note 3
2 Req’d/Assy.
Note 3
Insert
2 Req’d/Assy.
Note 3
Note 2 Note
2
Note 1
.550
[13.97]
.630
[16.0]
(2) #6x5/8 Lg Type B
Pan head sheet metal
screws (not supplied)
Cap Connector
Enclosed Strain
Relief
Adapter
Note 4
Note: All part numbers are RoHS Compliant.
177
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Flanged Cap Housings with Twist and Lock Feature
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Flanged Cap Housings
.250 [6.35] Centerline
Standard Density
Product Facts
■Available in a 6, 9, and 12
circuit design
■Designed for household
appliances where a
bulkhead connector system
is needed in conjunction
with foam-in insulation
■Mates with standard
Universal MATE-N-LOK plug
housings (page 174)
■Accepts Universal
MATE-N-LOK pin and socket
contacts (page 167)
■Designed to utilize the
Splash Proof/Sealed
Universal MATE-N-LOK
seals for additional sealing
protection (pages 174-175)
Material and Finish
Housing—Nylon, UL 94V-0 or
UL 94V-2 rated
Contacts—Phosphor Bronze or Brass
Plating—Pre-tin or Gold
Related Product Data
Contacts—pages 172-173
Plug Housings—page 174
Seals—page 180
.115
[2.92] 1.365
[34.67]
.185
[4.69]
1.145
[29.08]
2.000
[50.80]
.290
[7.36]
.010
[0.25]
1.080
[27.43]
.800
[20.32]
.550
[13.97]
.675
[17.15]
2 Plc.
.510
[12.95]
Notes:
1. Recommended Panel Thickness:
0.76-2.29 [.030-.090]
2. Panel must be punched so that
the housing enters the panel in
the same direction as the punch.
3. Asymmetrical panel cutout pro-
vides polarization for Pin 1 loca-
tion.
Recommended Panel Cutout
(for 6 and 9 Pos. Housings)
Dia.
Dia.
Dia.
Radius
Number of Cap Housing Part Numbers
Circuits UL 94V-0 UL 94V-2
6 794760-1 794714-1
9 794761-1 794715-1
12 794762-1 794716-1
Note: All part numbers are RoHS Compliant.
178
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Sealed Bulkhead Connectors
.250 [6.35] Centerline Standard Density
Universal MATE-N-LOK Sealed Bulkhead Connectors
Product Facts
■Bulkhead mount Universal
MATE-N-LOK connector
that facilitates sealed
panel mounting and works
with existing Universal
MATE-N-LOK seals to
provide a fully-sealed
interconnection system
■Available in 4, 6, 9 and 12
positions
■Sealed, flange mount
design
■Mates to standard Universal
MATE-N-LOK plug housings
■Accepts standard Universal
MATE-N-LOK contacts
■Works with standard
Universal MATE-N-LOK
connector interface and
wire seals
■Anti-rotation feature aids
installation
■Rear mount flange design
enables use in wire
harnesses
■Pins and sockets can be
intermixed in the same
housing
■UL Recognized,
File No. E28476
■CSA Certified,
File No. 1030930
Applications
■Vending Machines
■Industrial Machinery
■Lighting
■HVAC Equipment
Performance Characteristics
Dielectric Withstanding Voltage—
5.0 KVAC or 5.0 KVDC between
adjacent circuits
Insulation Resistance—
1000 megohms minimum initial
between adjacent circuits
Voltage Rating—600 V AC or DC
Durability—50 cycles, mating
and unmating
Technical Documents
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Instruction Sheet
408-10017 Universal MATE-N-LOK
Bulkhead Connectors
R
179
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Sealed Bulkhead Connectors
.250 [6.35] Centerline
Standard Density
Universal MATE-N-LOK Sealed Bulkhead Connectors (Continued)
Connector Housings
Material and Finish
Housing—Nylon, UL 94V-0 rated
Contacts—Brass with pre-tin or gold
plating
O-ring Seal—Neoprene
Locking Nut—Steel, zinc plated
1.050
[26.67]
.750
[19.05]
.980
[24.89]
.300
[7.62]
1.160
[29.46]
1.500
[38.10]
1.000
[25.40] Ø1.320
[33.53]
1.680
[42.67]
Recommended
Panel Cut-Out for 4, 6 & 9 Position Product Only
1.480
[37.59] Ø1.660
[42.16]
Recommended
Panel Cut-Out for 12 Position Product Only
No. of Pos. Style Housing Part Number
4 In Line 1604256-1
6 Matrix 1604210-1
9 Matrix 1604254-1
12 Matrix 1604941-1
Note: All part numbers are RoHS Compliant.
4 Position Connector Housing
(shown)
180
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Sealed Connectors
.250 [6.35] Centerline Standard Density
Universal MATE-N-LOK Sealed Connectors
Splash Proof Seals
Product Facts
■Economical splash proof/
immersible sealed connec-
tor system
■No design changes to exist-
ing Universal MATE-N-LOK
product
■Existing applications utiliz-
ing Universal MATE-N-LOK
connectors can be upgraded
to a splash proof system
■Utilizes two wire seals and
one interface seal
■Wire range is 20-14 AWG
[.5-2.0] with insulation
diameter range .060-.130
[1.52-3.30]
■.110-.130 [2.79-3.30]
insulation diameter passed
European IP sealing level
5/6 + 7 (swirling dust/
immersion to 1 meter for
30 minutes)
■.060-.110 [1.52-2.79]
insulation diameter passed
European IP sealing level
5/5 + 7 (swirling dust/
heavy seas)
■Universal MATE-N-LOK II
keying plug can be used to
seal unused circuits
■Primary application is for
wire-to-wire; wire-to-board
application must use a
closed bottom header
A
.030
[.762]
.300
[7.62]
A.300
[7.62]
.400
[10.16]
.030
[.762]
.550
[13.97]
.800
[20.32]
A
.800
[20.32]
.400
[10.16]
.550
[13.97]
.400
[10.16]
.800
[20.32]
A
.030
[.762]
.800
[20.32]
2, 3, 4 Circuit, In-Line 6 Circuit, Matrix 9, 12, and 15 Circuit, Matrix
Wire
Wire interfaceinterfaceWire interface
Plug Housing
Mating
End
Contact
Cavity
Wire Seal
Pin Contact
Sealing Plug
Part Number 770377-1
Back Side
(Wire End)
Silos
Interface
Seal
Cap Housing
Wire Seal
Number of A Interface Seal Interface Seal Wire Seal
Circuits Dim Part Number Low Mating Force* Part Number
2 .550 794269-1 794991-1 794270-1
3 .800 794271-1 794992-1 794272-1
4 1.050 794273-1 — 794274-1
6—794275-1 794993-1 794276-1
9 .800 794277-1 794994-1 794278-1
12 1.050 794279-1 — 794280-1
15 1.300 794281-1 — 794282-1
Note: One interface seal and two wire seals required per mated assembly.
*Low mating force interface seals do not meet IP 5/6 IP 5/7 requirements.
Note: All part numbers are RoHS Compliant.
Material
Silicone rubber, blue color
Technical Documents
Product Specification
108-1031-1 Splash Proof Seal,
Universal MATE-N-LOK
Connectors
Contacts—page 175
Housings—page 174
Instruction Sheet
408-3392 Universal MATE-N-LOK
Splash Proof Seals
Note: For proper use of this product, customer should make sure
that Instruction Sheet 408-3392 is available for review.
181
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Sealed Connectors
.250 [6.35] Centerline
Standard Density
Universal MATE-N-LOK Sealed Connectors (Continued)
Contacts (used with
Splash Proof Seals)
Solid pin diameter .084 [2.13]
Split pin diameter .086 [2.18]
Stock thickness .012 [.305] unless
otherwise noted.
These contacts can be used in either
Universal MATE-N-LOK Plug or Cap
housings only.
Related Product Data
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Performance Characteristics—
pages 169-170
Technical Documents— pages 169
and 205-206
Application Tooling— pages 207-210
Housings—page 174
Solid Pin Split Pin Socket
Grounding Pin
(.100 [2.54] longer than standard pin)
(Mate first, break last, not for interrupting
current)
Wire Size Ins. Dia. L Dim. Contact Part Numbers HDM Hand Tool
Range Range Pin Socket Material & Finish Style Pin Socket Applicator Part No.
AWG [mm2]Strip Form Loose Piece Strip Form Loose Piece Part No.
Brass, Pre-tin 350218-1 350547-1 350536-1 350550-1
Brass, Gold1350218-2 350547-2 350536-2 350550-2
Brass, Select Gold2Solid 350218-7 350547-7 350536-7 350550-7
.790 .760 Phos. Brz., Pre-tin 350218-3 350547-3 350536-3 350550-3 687763-13
20-14 .060-.130 20.06 19.30 Phos. Brz., Select Gold2350218-6 350547-6 350536-6 350550-6 687763-2391500-1
[.5-2.0] 1.52-3.30 Brass, Pre-tin 350687-1 350705-1 ——687763-63
Brass, Gold1Split 350687-2 350705-2 ——
Brass, Select Gold2350687-7 350705-7 ——
.890 — Brass, Pre-Tin Grounding 350654-1 350669-1
22.60
1Gold Finish — Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact.
2Select Gold Finish — Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact.
3HDM Applicator part number ending in -1, is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K
Machine, -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information.
Notes:
1. Split pins recommended for use in housings having 6, 9, 12 and 15 circuits to reduce mating force.
2. Phosphor bronze material contacts are available for use in high temperature/humidity cycling applications,
consult Tyco Electronics.
3. 18-24 AWG contacts (page 166) can be used with splash proof seals if insulation diameter range is .060-.100 [1.52-2.54].
Contact Insertion Tool (For inserting
contacts applied to small diameter wire)
Part No. 91002-1
IS 408-7347
Universal MATE-N-LOK II
Keying Plug/Splash Proof
Sealing Plug
IS 408-3392
Related Product Data
Housings— page 174
Technical Documents— pages 169
and 205-206
.940
[23.88]
.130
[3.30]
Part Number
UL94V-0 Nylon material — 770377-1
Seal Latch Tool
Part No. 794381-1
IS 408-3392
Contact Extraction Tool
Part No. 318851-1
IS 408-4371
Note: All part numbers are RoHS Compliant.
182
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline Standard Density
Universal MATE-N-LOK Connectors
PC Board Vertical
Pin Headers
.250 [6.35] Centerline spacing
Material
Housing —
UL94V-2 Nylon, natural color
UL94V-0 Nylon
Contacts — Phosphor bronze
Solder tail diameter .062 [1.57]
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 169-170
Recommended PC Board Hole
Layout— page 184
Technical Documents— pages 169
and 205-206
Mating Connectors
Universal MATE-N-LOK
Plug Housings — page 174
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Mates with Plug
Pin Header Part Numbers Housing Part Number
Number of A Flammability Pin
Standard Standard Tail
(Using Socket Contacts)
Circuits Dim. Rating Finish
Tail2Polarized2Long Tail3Universal Universal
MATE-N-LOK MATE-N-LOK II
UL94V-2 Pre-tin 350428-1 641963-1 350582-1 1-480698-0 —
Duplex1350428-4 641963-3 350582-4
2.550
Pre-tin 350786-1 641964-1 350787-1
13.97 UL94V-0 1-641964-14350777-1 770017-1
Duplex1350786-3 641964-3 350787-3
UL94V-2 Pre-tin 350429-1 641965-1 350583-1 1-480700-0 —
Duplex1350429-4 — 350583-4
3.800
Pre-tin 350789-1 641966-1 350790-1
20.32 UL94V-0 1-641966-14350766-1 770018-1
Duplex1350789-3 — 350790-3
Pre-tin 350430-1 641967-1 350584-1
UL94V-2 Pre-tin 770351-15— — 1-480702-0 —
41.050 Duplex1350430-4 — 350584-4
26.67
UL94V-0 Pre-tin 350792-1 641968-1 350793-1 350779-1 770019-1
Duplex1350792-3 — 350793-3
UL94V-2 Pre-tin 640466-1 643405-1 — 1-480763-0 —
51.300 Duplex1640466-3 ——
33.02 UL94V-0 Pre-tin 640900-1 643406-1 — 350809-1 770016-1
Duplex1640900-3 ——
61.550 UL94V-2 Pre-tin 641832-1 643407-1 — 640585-1 —
39.37 UL94V-0 Pre-tin 641831-1 643408-1 — 640581-1 —
2.050 UL94V-2 Pre-tin 641825-1 — 770143-1 640586-1 —
8 UL94V-0 Pre-tin 641828-1 643410-1 770272-1 640582-1 —
52.07 UL94V-0 Duplex1— 643410-3 770272-3 ——
Mates with Plug
Pin Header Part Numbers Housing Part Number
Number of A Flammability Pin
Standard Standard Tail
(Using Socket Contacts)
Circuits Dim. Rating Finish
Tail2Polarized2Long Tail3Universal Universal
MATE-N-LOK MATE-N-LOK II
Pre-tin 350431-1 641969-1 350585-1
UL94V-2 — 643749-151-480704-0 —
6.550 Duplex1350431-4 — 350585-4
13.97 Pre-tin 350711-1 641970-1 350732-1
UL94V-0 1-641970-14350715-1 770020-1
Duplex1350711-4 641970-3 350732-4
UL94V-2 Pre-tin 350432-1 641971-1 350586-1 1-480706-0 —
.800
Duplex1350432-4 641971-3 350586-4
920.32 Pre-tin 350712-1 641972-1 350742-1
UL94V-0 1-641972-14350720-1 770021-1
Duplex1350712-4 641972-3 350742-4
UL94V-2 Pre-tin 350433-1 641973-1 350587-1 1-480708-0 —
Duplex1350433-4 — 350587-4
12 1.050
Pre-tin 350713-1 641974-1 350737-1
26.67 UL94V-0 1-641974-14350735-1 770022-1
Duplex1350713-4 641974-3 350737-4
UL94V-2 Pre-tin 350434-1 641975-1 350588-1 1-480710-0 —
15 1.300 Duplex1350434-4 — 350588-4
33.02 UL94V-0 Pre-tin 350714-1 641976-1 350738-1 350736-1 770023-1
Duplex1350714-4 641976-4 350738-4
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use Standard Tail for .062 [1.57] thick PC Board. 3Use Long Tail for .125 [3.18] thick PC Board.
4Black in color. 5No drain holes, used w/ seals, page 180. Note: All part numbers are RoHS Compliant.
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
.300
[7.62]
.550
[13.97]
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
.800
[20.32]
2, 3, 4, 5, 6 and 8
Circuit, In-Line
6, 9, 12 and 15
Circuit, Matrix
Polarizing
feature
Polarizing
feature
.550
[13.97]
Note: Header Housings on pages
182-185 are available in colors
listed on page 188. Call Technical
Support for exact Part Numbers.
183
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Standard Density
PC Board Vertical
Socket Headers
.250 [6.35] Centerline spacing
Material
Housing —
UL94V-2 Nylon, natural color
UL94V-0 Nylon
Contacts — Phosphor bronze
Solder tail diameter .062 [1.57]
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 169-170
Recommended PC Board Hole
Layout— page 184
Technical Documents— pages 169
and 205-206
Mating Connectors
Universal MATE-N-LOK
Plug Housings — page 174
Universal MATE-N-LOK II
Plug Housings — pages 193-194
2, 3, 4, 5, and 6
Circuit, In-Line
Mates with Plug
Socket Header Part Numbers Housing Part Number
Number of A Flammability Socket
Standard Standard Tail
(Using Pin Contacts)
Circuits Dim. Rating Finish
Tail2Polarized2Long Tail3Universal Universal
MATE-N-LOK MATE-N-LOK II
UL94V-2 Pre-tin 350759-4 643411-1 350986-4 1-480698-0 —
2.550 Duplex1350759-5 ——
13.97 UL94V-0 Pre-tin 350824-1 643412-1 350831-1 350777-1 770017-1
Duplex1350824-4 643412-3 —
UL94V-2 Pre-tin 350760-4 643413-1 350987-4 1-480700-0 —
3.800 Duplex1350760-5 ——
20.32 UL94V-0 Pre-tin 350825-1 643414-1 350832-1 350766-1 770018-1
Duplex1350825-4 643414-3 350832-4
UL94V-2 Pre-tin 350761-4 643415-1 350988-4 1-480702-0 —
41.050 Duplex1350761-5 — 350988-5
26.67 UL94V-0 Pre-tin 350826-1 643416-1 350833-1 350779-1 770019-1
Duplex1350826-4 — 350833-4
UL94V-2 Pre-tin 640467-1 ——
1-480763-0 —
51.300 Pre-tin 640467-3 ——
33.02 UL94V-0 Pre-tin 640901-1 ——
350809-1 770016-1
Duplex1640901-3 ——
61.550 UL94V-0 Duplex1770262-3 ——640581-1 —
39. 37
Mates with Plug
Socket Header Part Numbers Housing Part Number
Number of A Flammability Socket
Standard Standard Tail
(Using Pin Contacts)
Circuits Dim. Rating Finish
Tail2Polarized2Long Tail3Universal Universal
MATE-N-LOK MATE-N-LOK II
UL94V-2 Pre-tin 350762-4 643423-1 350989-4 1-480704-0 —
6.550 Duplex1350762-5 — 350989-5
13.97 UL94V-0 Pre-tin 350827-1 643424-1 350834-1 350715-1 770020-1
Duplex1350827-4 643424-3 350834-4
UL94V-2 Pre-tin 350763-4 643425-1 350990-4 1-480706-0 —
9.800 Duplex1350763-5 — 350990-5
20.32 UL94V-0 Pre-tin 350828-1 643426-1 350835-1 350720-1 770021-1
Duplex1350828-4 643426-3 350835-4
UL94V-2 Pre-tin 350764-4 — 350991-4 1-480708-0 —
12 1.050 Duplex1350764-5 — 350991-5
26.67 UL94V-0 Pre-tin 350829-1 643428-1 350836-1 350735-1 770022-1
Duplex1350829-4 — 350836-4
UL94V-2 Pre-tin 350765-4 643429-1 350992-4 1-480710-0 —
15 1.300 Duplex1350765-5 ——
33.02 UL94V-0 Pre-tin 350830-1 643430-1 350837-1 350736-1 770023-1
Duplex1350830-4 — 350837-4
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use Standard Tail for .062 [1.57] thick PC Board.
3Use Long Tail for .125 [3.18] thick PC Board.
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
.300
[7.62]
Polarizing
feature
.550
[13.97]
6, 9, 12 and 15
Circuit, Matrix
.550
[13.97]
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
.800
[20.32]
Polarizing
feature
Note: All part numbers are RoHS Compliant.
Note: Header Housings on pages
182-185 are available in colors
listed on page 188. Call Technical
Support for exact Part Numbers.
184
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline Standard Density
Recommended
PC Board
Hole Layouts
for Pin and Socket
Vertical Headers
Related Product Data
Vertical Headers—pages 182-183
8 Circuit
6 Circuit
5 Circuit
4 Circuit
3 Circuit
2 Circuit
olarizing Hole
See Note
No. 1 Position
.250
[6.35]Typ.
Dia. Typ.
.070
[1.78]
.175
[4.45]
2, 3, 4, 5, 6 and 8
Circuit, In-Line
6, 9, 12 and 15
Circuit, Matrix
Polarizing Hole
See Note
.250
[6.35]Typ.
.250
[6.35]Typ. No. 1 Circuit
No. 2 Circuit
Polarizing Hole
See Note
.070
[1.78] Dia. Typ.
.175
[4.45]
.250
[6.35]Typ.
.250
[6.35]Typ.
No. 1 Circuit
No. 2 Circuit
250
.35]Typ. No. 1 Circuit
No. 2 Circuit
Polarizing Hole
See Note
.250
[6.35]Typ.
No. 1 Circuit
No. 2 Circuit
Polarizing Hole
See Note
.250
[6.35]Typ.
.250
[6.35]Typ.
.175
[4.45]
.070
[1.78] Dia. Typ.
.070
[1.78] Dia. Typ.
.175
[4.45]
.175
[4.45]
.070
[1.78] Dia. Typ.
Note: Polarizing hole .070 [1.78] Dia. required for polarized headers only.
PC Board Vertical
Pin Headers with
ACTION PIN Contacts
Material and Finish
Housing — PBT, black
Flammability Rating — UL94V-0
Contacts — Copper alloy, plated with
tin over nickel on entire contact
Related Product Data
Performance Characteristics—
pages 169-170
Technical Documents — pages 169
and 205-206
Product Specification
108-5222 ACTION PIN Universal
MATE-N-LOK Header
Assembly
Mating Connectors
Universal MATE-N-LOK
Plug Housings — page 174
Universal MATE-N-LOK II
Plug Housings — pages 193-194
.299
[7.59] Typ.
A
.250
[6.35]
.200
[5.08 ]
± .004
± 0.10
.630
[16.00]Max.
Recommended PC Board Hole Layout
2 Circuit
3 Circuit
4 Circuit
.062
[1.57]Ref.
PC Board Hole Dimensions
.100
[2.54 ]
± .004
± 0.10 .200
[5.08 ]
± .004
± 0.10
Dia. After
Reflow
.032
[0.81 ]
± .002
± 0.05
.038
[0.97 ]
± .001
± 0.03 .0003-.0012
[0.01-0.03]
.001-.003
[0.03-0.08]
Mates with Plug Housing
Number of Part Number (Using Socket Contacts)
Circuits A Dim. Part Number Universal Universal
MATE-N-LOK MATE-N-LOK II
2.750 173924-1 1-480698-0 770017-1
19.05 350777-1
31.000 173925-1 1-480700-0 770018-1
25.40 350766-1
41.250 173926-1 1-480702-0 770019-1
31.75 350779-1
Note: Install in PC Board with arbor tool.
Note: All part numbers are RoHS Compliant.
Note: Header Housings on pages
182-185 are available in colors
listed on page 188. Call Technical
Support for exact Part Numbers.
185
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors
.250 [6.35] Centerline
Standard Density
PC Board Right-Angle
Pin and Socket Headers
.250 [6.35] Centerline spacing
Material
Housing — Nylon
Contacts — Phosphor bronze
Solder tail width .052 [1.32]
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 169-170
Technical Documents— pages 169
and 205-206
Mating Connectors
Universal MATE-N-LOK
Plug Housings — page 174
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Test Connectors
(with spring loaded
contacts)
Material
Housing — Nylon
Flammability Rating — UL94V-0
Related Product Data
Mating Connectors — Housings and
headers having the same number of
circuits. The housings can have pin or
socket contacts, or a combination
of both.
Mating Housings — page 174
Mating Headers — pages 182-185
Other Mating Connectors
Universal MATE-N-LOK II Housings—
pages 193-194
Notes:
1. Test probes have 5 amp maxi-
mum current rating. 1,000,000
cycles.
2. Test Connector housings are of
the same configuration as stan-
dard housings. Refer to page 23
for dimensional specifications.
Number of Part Numbers
Circuits Plug Cap
2 350848-2 350849-2
3 350848-3 350849-3
4 350848-4 350849-4
5 350848-5 350849-5
6 350848-6 350849-6
9 350848-9 350849-9
12 1-350848-2 1-350849-2
15 1-350848-5 1-350849-5
2, 3, 4 and 5 Circuit,
In-Line
6, 9, 12 and 15 Circuit,
Matrix
.680
[17.27]
.360
[9.14]
.250
[6.35]
.160
[4.06]
Plug
Plug
Cap
Cap
.084 [2.13] Dia. Pin
Mates with
Universal
MATE-N-LOK
Sockets
Recommended PC Board Hole Layout
.062 [1.57] Board Thickness
.060
[1.52]
.150
[3.81]
2 Places
.505
[12.83]
.290
[7.37]
.250
[6.35]
Typ.
.100
[2.54]
No. 1 Circuit
Dia.
Dia. Typ.
Typ.
2, 3, 4, 5, 6 and 8 Circuit, In-line
Use 6-32 UNC Pan Head Screw
3/8 [9.53] long for mounting
(Not Supplied)
Right-Angle Header Part Numbers
No. of
Dimensions
Contact
UL94V-2 UL94V-0
Circuits AB CFinish Mates with
Pin Socket Mates Pin Socket Universal Universal
with
MATE-N-LOK MATE-N-LOK II
.550 1.245 .830 Pre-tin ———
1-350942-0 643226-1
2 770994-12— 350777-1 770017-1
13.97 31.62 21.08 Duplex1———3-350942-0 —
3.800 1.495 1.080 Pre-tin ——
—1-350943-0 643228-1 350766-1 770018-1
20.32 37.97 27.43 Duplex1— — 3-350943-0 3-643228-0
41.050 1.745 1.330 Pre-tin 1-350948-0 — 1-480702-0 1-350944-0 643230-1 350779-1 770019-1
26.67 44.32 33.78 Duplex1—— 3-350944-0 3-643230-0
51.300 1.995 1.580 Pre-tin 1-350949-0 — 1-480763-0 1-350945-0 643232-1 350809-1 770016-1
33.02 50.67 40.13 Duplex1—— 3-350945-0 3-643232-0
61.550 2.245 1.830 Pre-tin 640587-1 643235-1 640585-1 640583-1 643234-1 640581-1 —
39.37 57.02 46.48 Duplex1— 640583-3 3-643234-0
82.050 2.745 2.330 Pre-tin — 643237-1 640586-1 640584-1 643236-1 640582-1 —
52.07 69.72 59.18 Duplex1— 640584-3 3-643236-0
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact. 2Black in color.
Note: All part numbers are RoHS Compliant.
Note: Header Housings on pages
182-185 are available in colors
listed on page 188. Call Technical
Support for exact Part Numbers.
186
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Circular Connectors
.250 [6.35] Centerline Standard Density
Universal MATE-N-LOK Circular Connectors
Applications
■Primary applications are in
the Lighting, Vending, and
Appliance industries
■Applications where use of a
completed harness that will
pass through a 7/8 inch
knock-out is required
■Provides the capability to
quickly disconnect
individual fixtures from
sensitive environmental
areas and perform
maintenance at other sites
■Not for interrupting current
Product Facts
■Unique product designed to
accommodate the specific
needs of the lighting
industry
■Circular design allows the
connector to pass through
7/8 inch knock-out holes in
electrical fixtures and boxes
■6-position accommodates
most major electrical
industry requirements
■Universal MATE-N-LOK
connector centerline
spacing maintains UL and
CSA approvals
■Uses standard Universal
MATE-N-LOK contacts and
application tooling
■Positive polarized housing
helps prevent incorrect
mating
■UL Recognized,
File No. E28476
■CSA Certified,
File No. LR7189
Performance Characteristics
Voltage—600 V AC or DC
Current—20 amps maximum per
UL-1977 (6 position, fully ener-
gized)
Dielectric Withstanding Voltage—
5 KVAC or KVDC
Insulation Resistance—1000 MΩ
max. between adjacent circuits
Durability—50 cycles mating and
unmating
Contact Retention—
15 lb. minimum per contact
R
Technical Documents
Product Specification
108-2069 Universal MATE-N-LOK
Circular Connector
Application Specification
114-1010 Universal MATE-N-LOK
Connectors
187
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Circular Connectors
.250 [6.35] Centerline
Standard Density
Universal MATE-N-LOK Circular Connectors (Continued)
Material and Finish
Housings—Nylon, UL 94V-2 rated
Related Product Data
Contacts—pages 172-173
.810
[20.57] Ref.
1.080
[27.43]
.460
[11.68]
.820
[20.83]
Ref.
45˚
2 Plc.
Plug
Part No. 794911-1
.810
[20.57]
1.080
[27.43]
.820
[20.83]
45˚
2 Plc.
Cap
Part No. 794912-1
Note: All part numbers are RoHS Compliant.
188
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
Universal MATE-N-LOK Connectors — Available in Colors
Universal MATE-N-LOK Connectors — Available in Colors
.250 [6.35] Centerline
Base Part Number No. of Circuits Housing Material
480698 2 Plug V-2
480699 2 Cap V-2
480700 3 Plug V-2
480701 3 Cap V-2
480702 4 Plug V-2
480703 4 Cap V-2
480763* 5 Plug* V-2
480764* 5 Cap* V-2
480704 6 Plug V-2
480705 6 Cap V-2
480706 9 Plug V-2
480707 9 Cap V-2
480708 12 Plug V-2
480709 12 Cap V-2
480710 15 Plug V-2
480711 15 Cap V-2
350777 2 Plug V-0
350778 2 Cap V-0
350766 3 Plug V-0
350767 3 Cap V-0
350799 4 Plug V-0
350780 4 Cap V-0
350809 5 Plug V-0
350810 5 Cap V-0
350715 6 Plug V-0
350781 6 Cap V-0
350720 9 Plug V-0
350782 9 Cap V-0
350735 12 Plug V-0
350783 12 Cap V-0
350736 15 Plug V-0
350784 15 Cap V-0
Dash Number Color
1-xxxxxx-0 Natural
1-xxxxxx-1 Brown
1-xxxxxx-2 Red
1-xxxxxx-3 Orange
1-xxxxxx-4 Yellow
1-xxxxxx-5 Green
1-xxxxxx-6 Blue
1-xxxxxx-8 Gray
1-xxxxxx-9 Black
* Special for Base
Part Numbers 480763 and
480764
Dash Number Color
xxxxxx-1 Natural
1-xxxxxx-1 Brown
1-xxxxxx-2 Red
1-xxxxxx-3 Orange
1-xxxxxx-4 Yellow
1-xxxxxx-5 Green
1-xxxxxx-6 Blue
1-xxxxxx-8 Gray
1-xxxxxx-9 Black
Note: See corresponding Universal
MATE-N-LOK Plug and Cap Housing
Base Part Numbers on page 175.
Header Housings on pages 182-185
are also available in colors. Call
Technical Support for exact Part
Numbers.
189
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK II Connectors
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
Performance Characteristics
The Universal MATE-N-LOK II
Connector performance characteristics
found on pages 189-190 are based on
free-hanging and panel mount connec-
tors, loaded with contacts crimped on
stranded wire.
Dielectric Withstanding Voltage—
5.0 KV AC or DC between adjacent
circuits initially
Insulation Resistance—
1000 megohms minimum between
adjacent circuits
Voltage Rating—600 V AC or DC
Connector Mating—
Split Pin — 1.5 lb. max. per circuit
Connector Unmating—
Split Pin — .5 lb. min. per circuit
Contact Insertion Force—3.0 lb.
max. per contact unassembled
Contact Retention—35 lb. min. per
contact
Durability—50 cycles, mating and
unmating
Product Facts
■High reliability
■For use where repair or re-
placement would be difficult
■Pins and sockets can be
intermixed in the same
housing
■Available in 2 through
15 circuit sizes for free-
hanging or panel mount
wire-to-wire connection
■Mate with standard
Universal MATE-N-LOK
Housings and PC Board
Headers
■Uses standard Universal
MATE-N-LOK panel cutouts
and strain reliefs
■Polarized housings available
in UL94V-0 flammability
rated material
■Enclosed contacts for shock
protection
■F-Crimp terminals accept
30-10 AWG [.05 -5.0 mm2]
wire sizes
■Contacts available in strip
and loose form
■Lanceless contacts for
tangle-free handling
■Insulation capability to
.200 [5.08] diameter
■Connector design provides
for complete contact
insertion
■Three-point stabilization pre-
cisely controls contact align-
ment, minimizing stubbing
■Tin or duplex gold plated
contacts
■Contacts are on .250 [6.35]
centerline spacing
■Not for interrupting current
■Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
■Certified by Canadian
Standards Association,
File No. LR 7189
■Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
R
R
Technical Documents
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
Application Specification
114-1043 Universal MATE-N-LOK II
Connectors
Instruction Sheet
408-3200 Housing, Contacts and
Accessories
190
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline Standard Density
Performance
Characteristics (Continued)
Maximum Current—Maximum cur-
rent rating of Universal MATE-N-LOK II
connectors is limited by the maximum
operating temperature of the housings
which is 120°C including the tempera-
ture rise of the contacts which is a maxi-
mum of 30°C. There are several
variables which have a direct effect on
this maximum current-carrying capabil-
ity for a given connector and must be
considered for each application. These
variables are:
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current carrying
capabilities since the wire conducts heat
away from the connector.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Universal MATE-N-LOK II connectors
also will withstand the following tests:
Vibration—10-55-10 cycles per
minute at .06 inch total excursion
Physical Shock—18 drops,
50 g sawtooth at 10 milliseconds
Housing Panel Retention—75 lb. min.
Housing Lock Strength—35 lb. min.
Thermal Shock— -55°C to +85°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Corrosion—48 hr. at 5% salt
concentration
Related Product Data
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
Termination Contact
Resistance Crimp
Wire Size Test Resistance Tensile Force
AWG mm2Current Milliohms Force (Min.)
(Amps) (Max. Init.) lbs. N
30 .05 —— 1.5 7
28 .08 —— 313
26 .12 —— 522
24 .2 1.5 3.50 7 31
22 .3 3 3.50 12 53
20 .5 4.5 3.00 17 66
18 .8 6 3.00 30 133
16 1.2 8 2.75 45 200
14 2.0 10 2.75 50 222
12 3.0 —— 60 267
10 5.0 —— 70 311
Note: This is the total resistance between wire crimps of a mated pin and
socket.
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
Wire-to-Wire
Minimum Wire Lengths for T-Rise vs. Current Testing
AWG Min. Length (in.) AWG Min. Length (in.)
30 2.6 18 9.4
28 3.2 16 11.3
26 4.1 14 13.7
24 5.1 12 16.4
20 7.8 10 19.3
Note: If wire lengths used are less than those listed above, the current carry-
ing ability of the system will be reduced due to less heat being conducted
away from the connector. The customer should fully test all applications.
Calculated Current Table
Number of Wire Gauge
Circuits 10 12 14 16 18 20 22 24 26 30
2 19.00 18.00 17.00 14.50 13.00 10.00 8.00 6.50 5.50 3.50
3 17.50 16.50 15.50 13.00 12.00 9.00 7.50 6.00 5.00 3.00
4 16.50 15.50 15.00 12.50 11.00 8.50 7.00 5.50 4.50 3.00
5 16.00 15.00 14.00 12.00 10.50 8.00 6.50 5.50 4.50 3.00
6 Matrix 15.00 14.00 13.00 11.00 9.50 7.50 6.00 5.00 4.00 2.50
8 14.50 14.00 13.00 10.50 9.50 7.50 6.00 5.00 4.00 2.50
9 13.50 12.50 11.50 9.50 8.50 6.50 5.50 4.50 3.50 2.00
10 14.00 13.00 12.50 10.00 9.00 7.00 5.50 4.50 3.50 2.50
12 12.50 12.00 11.00 9.00 8.00 6.00 5.00 4.00 3.00 2.00
15 12.00 11.50 10.00 8.50 7.50 6.00 4.50 4.00 3.00 2.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection
of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully
loaded housings being 100% energized. Note: All combinations were not tested, and this chart contains interpolated
and extrapolated values.
Wire-to-Board
Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a
separate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire charts
may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For vertical
headers, only 95% of the Wire-to-Wire value should be used. For right-angle headers, only 75% of the Wire-to-Wire
value should be used. The chart values are only a tool for connector selection and will require the customer to fully
test their application.
Termination Resistance/Contact Crimp Tensile Force
191
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
Universal MATE-N-LOK II Connector Mating Combinations
Connector Part Number Mating Connector Part Number
PC Board Headers
Number Flammability Plug Kit Cap Kit Vertical Pin2Vertical Socket2Right-Angle2
of Style Part Part Plating Standard Standard Long Standard Standard Long Pin Socket
Circuits Rating Number2Number2Tail Tail
Tail Polarized Tail Tail Polarized Tail
2 UL94V-0 In-Line 770017-1 770024-1 Pre-tin 350786-1 641964-1 350787-1 350824-1 643412-1 350831-1 1-350942-0 643226-1
Duplex1350786-3 641964-3 350787-3 350824-4 643412-3 — 3-350942-0 —
3 UL94V-0 In-Line 770018-1 770025-1 Pre-tin 350789-1 641966-1 350790-1 350825-1 643414-1 350832-1 1-350943-0 643228-1
Duplex1350789-3 — 350790-3 350825-4 643414-3 350832-4 3-350943-0 3-643228-0
4 UL94V-0 In-Line 770019-1 770026-1 Pre-tin 350792-1 641968-1 350793-1 350826-1 643416-1 350833-1 1-350944-0 643230-1
Duplex1350792-3 — 350793-3 350826-4 — 350833-4 3-350944-0 3-643230-0
5 UL94V-0 In-Line 770016-1 — Pre-tin 640900-1 643406-1 — 640901-1 ——1-350945-0 643232-1
Duplex1640900-3 ——640901-3 ——3-350945-0 3-643232-0
6 UL94V-0 Matrix 770020-1 770027-1 Pre-tin 350711-1 641970-1 350732-1 350827-1 643424-1 350834-1 ——
Duplex1350711-4 641970-3 350732-4 350827-4 643424-3 350834-4 ——
9 UL94V-0 Matrix 770021-1 770028-1 Pre-tin 350712-1 641972-1 350742-1 350828-1 643426-1 350835-1 ——
Duplex1350712-4 641972-3 350742-4 350828-4 643426-3 350835-4 ——
12 UL94V-0 Matrix 770022-1 770029-1 Pre-tin 350713-1 641974-1 350737-1 350829-1 643428-1 350836-1 ——
Duplex1350713-4 641974-3 350737-4 350829-4 — 350836-4 ——
15 UL94V-0 Matrix 770023-1 770030-1 Pre-tin 350714-1 641976-1 350738-1 350830-1 643430-1 350837-1 ——
Duplex1350714-4 641976-4 350738-4 350830-4 — 350837-4 ——
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate
on entire contact.
2Universal MATE-N-LOK II Plug and Cap housings accept pin or socket contacts. Use the appropriate contacts in the Plug housing as required by the
mating component.
Note: All part numbers are RoHS Compliant.
192
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline Standard Density
Contacts
Split pin diameter .086 [2.18]
Stock thickness .012 [.305]
These contacts can be used in either
Universal MATE-N-LOK II Plug or Cap
housings.
Related Product Data
Product Specification
108-1090 Universal MATE-N-LOK II Connectors
Application Specification
114-1043 Universal MATE-N-LOK II Contacts
Performance Characteristics— pages 189-190
Housings— pages 193-194
Technical Documents—pages 189 and 205-206
Application Tooling— pages 207-210
Contact Extraction Tool
(For extracting contacts crimped
on 24 AWG or smaller wire)
Part No. 318851-1
IS 408-4371
Latch Disengaging Tool
Part No. 58382-1
IS 408-9436
Contact Insertion Tool
(For inserting contacts applied to small diameter wire)
Part No. 91002-1
IS 408-7347
Pin Socket
Grounding Pin
(Mate first, break last, not for interrupting
current)
Solid pin diameter .084 [2.13]
.100 [2.54] longer than standard pin
Stock thickness .012 [.304]
These contacts can be used in either
Universal MATE-N-LOK II Plug or Cap
housings only.
LL
L
Contact Part Numbers
Wire Size Ins. Dia. L Dim. Pin Socket HDM Hand Tool
Range Range Pin Socket Material & Finish Strip Loose Strip Loose Applicator Part No.
AWG [mm2]Form Piece Form Piece Part No.
30 -26 .032 -.057 1.005 .980 Phos. Brz. Gold1770011-6 770512-6 770012-6 770416-6 567252-1658439-1
[.05 -.12] .813 -1.45 25.53 24.90 567252-46
Brass. Pre-tin 770009-1 770252-1 ——
24 -18 .040 -100 1.005 .980 Brass. Duplex21-770009-0 1-770252-0 ——
567214-16
91510-1
[.2 -.8] 1.02 -2.54 25.53 24.90 Phos. Brz. Pre-tin ——770010-3 770253-3 567214-26
Phos. Brz. Duplex2——1-770010-0 1-770253-0
567214-46
Brass. Pre-tin 770007-1 770250-1 ——
.060 -.130 1.005 .980 Brass. Duplex21-770007-0 1-770250-0 ——
567213-16
91500-1
1.52 -3.30 25.53 24.90 Phos. Brz. Pre-tin ——770008-3 770251-3 567213-26
20 -14 Phos. Brz. Duplex2— — 1-770008-0 1-770251-0
567213-46
[.5 -2.0] Brass. Pre-tin 770005-1 770248-1 ——
.130 -.200 .995 .970 Brass. Duplex21-770005-0 1-770248-0 ——
567212-1691508-14
3.30 -5.08 25.27 24.63 Phos. Brz. Pre-tin 770005-3 — 770006-3 770249-3 567212-2691506-14
Phos. Brz. Duplex21-770005-1 — 1-770006-0 1-770249-0
567212-46
12 -10 .200 max.31.005 .980 Phos. Brz. Pre-tin 770003-3 770246-3 770004-3 770247-3 567211-16
567211-2669710-15
[3.0 -5.0] 5.08 25.53 24.90 Phos. Brz. Duplex21-770003-0 1-770246-0 1-770004-0 1-770247-0 567211-46
1Gold Finish — Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact.
2Duplex Finish — Plated with .000030 [.000762] min. gold in mating area and .000050 [.00127] min. tin in crimp area over .000050 [.00127] min. nickel
underplate on entire contact.
3There is no insulation barrel on this contact. Insulation maximum diameter is limited by the housing. Use of strain relief is recommended with these contacts.
4Use Hand Tool No. 91508-1 for 20 – 18 AWG and No. 91506-1 for 16–14 AWG.
5Hand Tool No. 69710-1 uses die set No. 58380-1 for 12 AWG and No. 58380-2 for 10 AWG.
6HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K
Machine, -4 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for further information.
Wire Size Ins. Dia. L Contact Part Numbers HDM Hand Tool
Range Material & Finish Applicator
AWG [mm2]Range Dim. Strip Form Loose Piece Part No. Part No.
.060 -.130 1.105 Brass. Pre-tin 770193-1 770254-1 567213-13
567213-2391500-1
20 -14 1.52-3.30 25.53 Brass. Duplex11-770193-0 1-770254-0 567213-43
[.5 -2.0] .130-.200 1.085 Brass. Pre-tin 770194-1 770255-1 567212-1391508-12
567212-2391506-12
3.30-5.08 27.56 Brass. Duplex11-770194-0 1-770255-0 567212-43
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area and .000050 [.00127] min. tin in crimp area
over .000050 [.00127] min. nickel underplate on entire contact.
2Use Hand Tool No. 91508-1 for 20 –18 AWG and No. 91506-1 for 16 –14 AWG.
3HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used
on AMP-O-LECTRIC Model K Machine, -4 is used on AMP-O-LECTRIC Model G Machine. See pages 207-210 for
further information.
Note: All part numbers are RoHS Compliant.
193
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
Housing Kits
Free-Hanging or Panel Mount
.250 [6.35] Centerline spacing
Material — Nylon
Flammability Rating — UL 94V-0
Related Product Data
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
Performance Characteristics—
pages 189-190
Contacts— page 192
Panel Cutout Recommendations—
page 195
Keying Plug— page 196
Strain Reliefs— page 196
Kit Components— page 195
Technical Documents— pages 189
and 205-206
Other Mating Connectors
Universal MATE-N-LOK Housings —
page 175
Universal MATE-N-LOK Headers—
pages 182-183 and 185
Universal MATE-N-LOK Test
Connectors — page 185
3, 4 and 5 Circuit,
In-Line
Plug Rear
Cap Front
Cap Front
Plug Rear Plug Front
Cap Rear
Cap Rear
Plug Front
2 Circuit, In-line
.550
[13.97]
.580
[14.73]
.845
[21.46]
Max. .300
[7.62]
.550
[13.97]
.550
[13.97]
.905
[22.98]
.580
[14.73]
.845
[21.46]
Max.
.550
[13.97]
.905
[22.98]
.300
[7.62]
A
.580
[14.73]
.300
[7.62]
A
.845
[21.46]
Max.
.905
[22.98]
.845
[21.46]
Max.
.580
[14.73]
A
A
.300
[7.62]
.905
[22.98]
Number Kit Part Numbers
of A(Includes Front and Rear)
Circuits Dim. Plug Cap
2—770017-1 770024-1
3.800 770018-1 770025-1
20.32
41.050 770019-1 770026-1
26.67
51.300 770016-14—
33.02
Notes:
1. Kits consist of a front and rear component.
2. Kit components can be purchased separately. Page 195.
3. Packaging: Bulk — 250 each component per poly bag/box.
4. Mates with standard Universal MATE-N-LOK cap housing P/N 350810-1
and 640900-X or 640901-X Vertical headers.
Note: All part numbers are RoHS Compliant.
194
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline Standard Density
Housing Kits
Free-Hanging or Panel Mount
.250 [6.35] Centerline spacing
Material — Nylon
Flammability Rating — UL 94V-0
Related Product Data
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
Performance Characteristics—
pages 189-190
Contacts— page 192
Panel Cutout Recommendations—
page 195
Keying Plug— page 196
Strain Reliefs— page 196
Kit Components— page 195
Technical Documents— pages 189
and 205-206
Other Mating Connectors
Universal MATE-N-LOK Housings —
page 176
Universal MATE-N-LOK Headers—
pages 182-183 and 185
Universal MATE-N-LOK Test
Connectors — page 185
9, 12 and 15 Circuit,
Matrix
Plug Rear
Cap Front
Cap Front
Plug Rear Plug Front
Cap Rear
Cap Rear
Plug Front
6 Circuit, Matrix
1.080
[27.43]
.845
[21.46]
Max.
.550
[13.97]
.550
[13.97]
.800
[20.32]
.905
[22.99]
1.020
[25.91]
.905
[22.99]
.800
[20.32]
.550
[13.97]
.845
[21.46]
Max.
.550
[13.97]
1.080
[27.43]
1.080
[27.43]
1.020
[25.91]
A
.905
[22.99]
.845
[21.46]
Max.
.800
[20.32]
A
A.905
[22.99]
.800
[20.32]
.845
[21.46]
Max.
A
1.080
[27.43]
Number Kit Part Numbers
of A(Includes Front and Rear)
Circuits Dim. Plug Cap
6—770020-1 770027-1
9.800 770021-1 770028-1
20.32
12 1.050 770022-1 770029-1
26.67
15 1.300 770023-1 770030-1
33.02
Notes:
1. Kits consist of a front and rear component.
2. Kit components can be purchased separately. Page 195.
3. Packaging: Bulk — 250 each component per poly bag/box.
Note: All part numbers are RoHS Compliant.
195
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline
Number Kit Component Part Numbers
of Plug Cap
Circuits Kit Front Rear Kit Front Rear
2 770017-1 770031-1 770032-1 770024-1 770045-1 770046-1
3 770018-1 770033-1 770034-1 770025-1 770047-1 770048-1
4 770019-1 770035-1 770036-1 770026-1 770049-1 770050-1
5 770016-1 770319-1 770320-1 ———
6 770020-1 770037-1 770038-1 770027-1 770051-1 770052-1
9 770021-1 770039-1 770040-1 770028-1 770053-1 770054-1
12 770022-1 770041-1 770042-1 770029-1 770055-1 770056-1
15 770023-1 770043-1 770044-1 770030-1 770057-1 770058-1
Notes:
1. Kits consist of a front and rear component.
2. Kit components can be purchased separately.
Note: All part numbers are RoHS Compliant.
Recommended
Cap Housing
Panel Cutouts
View is from cap entry side
Refer to Application Specification
114-1043
Notes:
1. Recommended panel thickness — .030-.090 [.762-2.286]. Panel must be punched so that housing enters panel in
same direction as the punch.
2. Optional — Do not remove this material when keying cap housing to panel.
3. Circuit #1 location when using panel keying with 6, 9, 12 and 15 circuit housings.
4. Circuit #1 location when using panel keying with 2, 3, and 4 circuit housings.
.100
[2.54]
D
B
E
C
A
.175
[4.45]
.110
[2.79]
.175
[4.45]
Note 3
Note 4
Note
2
Number of Dimensions
Circuits ABCDE
2.565 .340 .095 .530 .250
14.35 8.63 2.41 13.46 6.35
3.815 .340 .095 .530 .250
20.70 8.63 2.41 13.46 6.35
41.065 .340 .095 .530 .250
27.05 8.63 2.41 13.46 6.35
6.565 .480 .275 1.030 .250
14.35 12.19 6.99 26.16 6.35
9.815 .480 .275 1.030 .250
20.70 12.19 6.99 26.16 6.35
12 1.065 .480 .275 1.030 .350
27.05 12.19 6.99 26.16 8.89
15 1.315 .480 .275 1.030 .350
33.40 12.19 6.99 26.16 8.89
Housing Components
Free-Hanging or Panel Mount
.250 [6.35] Centerline spacing
Material — Nylon
Flammability Rating — UL 94V-0
Related Product Data
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
Performance Characteristics—
pages 189-190
Contacts— page 192
Illustrations and Dimensions—
pages 193-194
Panel Cutout Recommendations—
page 195
Keying Plug— page 196
Strain Reliefs— page 196
Technical Documents— pages 189
and 205-206
Other Mating Connectors
Universal MATE-N-LOK Connectors —
page 176
Universal MATE-N-LOK Headers—
pages 182-183 and 185
Universal MATE-N-LOK Test
Connectors — page 185
Front Housing
Section
Rear
Housing
Section
Rear
Housing
Section
Front
Housing
Section
Cap HousingPlug Housing
196
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK II Connectors
.250 [6.35] Centerline Standard Density
Plug or
Cap Housing
Strain Reliefs
IS 408-3320
Material — Nylon
Flammability Rating — UL 94V-0
Keying Plug
IS 408-3200
Related Product Data
Housings— pages 193-194
Technical Documents— pages 189
and 205-206
(2) #6x3/8 Lg. Type B
Pan head sheet metal
screws (not supplied)
Insert
Note 2
2 Req’d/Assy.
Note 3
1.300
[33.02]
A
(2) #6x3/8 Lg. Type B
Pan head sheet metal
screws (not supplied)
Insert
Note 2
2 Req’d/Assy.
Note 3
1.300
[33.02]
A
2, 3, 4, 5, 6, 9, 12 and 15
Circuit (Enclosed)
.940
[23.88]
.130
[3.30]
Style Number of A Insert Single Wire Wire Bundle Strain Relief
Circuits Dim. Supplied Dia. Range Dia. Range Part Numbers
Yes .040 – .190 — 640713-1
2.960 1.02 – 4.83
24.38 No — .200 – .350 640713-2
5.08 – 8.89
Yes .040 – .190 — 640714-1
31.140 1.02 – 4.83
28.96 No — .200 – .350 641945-1
In-Line 5.08 – 8.89
Yes .040 – .190 — 641776-1
41.340 1.02 – 4.83
34.04 No — .200 – .350 641776-2
5.08 – 8.89
Yes .040 – .190 — 643030-1
51.530 1.02 – 4.83
38.86 No — .200 – .350 643030-4
5.08 – 8.89
61.030 Yes — .120 – .650 640715-1
26.16 3.05 – 16.51
91.030 Yes — .120 – .650 640716-1
Matrix 26.16 3.05 – 16.51
12 1.280 Yes — .150 – .750 640717-1
32.51 3.81 – 19.05
15 1.530 Yes — .200 – .850 640718-1
38.86 5.08 – 21.59
Notes:
1. Insert comes attached to strain relief. It can be used to provide additional adjustment for small wire bundles or discarded.
2. Insert to be positioned as shown by dotted lines.
3. Strain relief part number represents one-half of a strain relief. Two of a part number are required for one connector.
Part Number
UL94V-0 Nylon material — 770377-1
In-Line Matrix
Note: All part numbers are RoHS Compliant.
197
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Headers for UMNL II Connectors
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
Universal MATE-N-LOK Headers
.250 [6.35] Centerline
PC Board Vertical
Pin Headers
.250 [6.35] Centerline spacing
Material
Housing — Nylon
Flammability Rating — UL94V-0
Contacts — Phosphor bronze
Solder tail diameter .062 [1.57]
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 189-190
Recommended PC Board Hole
Layout— page 199
Technical Documents— pages 189
and 205-206
Mating Connectors
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Universal MATE-N-LOK
Plug Housings — page 175
Mates with Plug
Number of A Pin Pin Header Part Numbers Housing Part Number
Circuits Dim. Finish Standard Standard Tail Long Tail3(Using Socket Contacts)
Tail2Polarized2Universal Universal
MATE-N-LOK II MATE-N-LOK
.550 Pre-tin 350786-1 641964-1 350787-1
213.97 1-641964-14770017-1 350777-1
Duplex1350786-3 641964-3 350787-3
.800 Pre-tin 350789-1 641966-1 350790-1
320.32 1-641966-14770018-1 350766-1
Duplex1350789-3 — 350790-3
41.050 Pre-tin 350792-1 641968-1 350793-1 770019-1 350779-1
26.67 Duplex1350792-3 — 350793-3
51.300 Pre-tin 640900-1 643406-1 — 770016-1 350809-1
33.02 Duplex1640900-3 ——
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use Standard Tail for .062 [1.57] thick PC Board.
3Use Long Tail for .125 [3.18] thick PC Board.
4Black in color.
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
.300
[7.62]
.550
[13.97]
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
.800
[20.32]
2, 3, 4 and 5
Circuit, In-Line
6, 9, 12 and 15
Circuit, Matrix
Polarizing
feature
Polarizing
feature
.550
[13.97]
Mates with Plug
Number of A Pin Pin Header Part Numbers Housing Part Number
Circuits Dim. Finish Standard Standard Tail Long Tail3(Using Socket Contacts)
Tail2Polarized2Universal Universal
MATE-N-LOK II MATE-N-LOK
6.550 Pre-tin 350711-1 641970-1 350732-1 770020-1 350715-1
13.97 Duplex1350711-4 641970-3 350732-4
.800 Pre-tin 350712-1 641972-1 350742-1
920.32 1-641972-14770021-1 350720-1
Duplex1350712-4 641972-3 350742-4
1.050 Pre-tin 350713-1 641974-1 350737-1
12 26.67 1-641974-14770022-1 350735-1
Duplex1350713-4 641974-3 350737-4
15 1.300 Pre-tin 350714-1 641976-1 350738-1 770023-1 350736-1
33.02 Duplex1350714-4 641976-4 350738-4
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use Standard Tail for .062 [1.57] thick PC Board.
3Use Long Tail for .125 [3.18] thick PC Board.
4Black in color.
Note: All part numbers are RoHS Compliant.
198
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Headers for UMNL II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Headers
.250 [6.35] Centerline Standard Density
PC Board Vertical
Socket Headers
.250 [6.35] Centerline spacing
Material
Housing — Nylon
Flammability Rating — UL94V-0
Contacts — Phosphor bronze
Solder tail diameter .062 [1.57]
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 189-190
Recommended PC Board Hole
Layout— page 199
Technical Documents— pages 189
and 205-206
Mating Connectors
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Universal MATE-N-LOK
Plug Housings — page 175
2, 3, 4 and 5
Circuit, In-Line
6, 9, 12 and 15
Circuit, Matrix
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
.300
[7.62]
.550
[13.97]
.175 Standard Tail
[4.45]
.235 Long Tail
[5.97]
.800
[20.32]
Polarizing
feature
Polarizing
feature
.550
[13.97]
Mates with Plug
Number of A Socket Socket Header Part Numbers Housing Part Number
Circuits Dim. Finish Standard Standard Tail Long Tail3(Using Pin Contacts)
Tail2Polarized2Universal Universal
MATE-N-LOK II MATE-N-LOK
2.550 Pre-tin 350824-1 643412-1 350831-1 770017-1 350777-1
13.97 Duplex1350824-4 643412-3 —
3.800 Pre-tin 350825-1 643414-1 350832-1 770018-1 350766-1
20.32 Duplex1350825-4 643414-3 350832-4
41.050 Pre-tin 350826-1 643416-1 350833-1 770019-1 350779-1
26.67 Duplex1350826-4 — 350833-4
51.300 Pre-tin 640901-1 ——
770016-1 350809-1
33.02 Duplex1640901-3 ——
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use Standard Tail for .062 [1.57] thick PC Board.
3Use Long Tail for .125 [3.18] thick PC Board.
Mates with Plug
Number of A Socket Socket Header Part Numbers Housing Part Number
Circuits Dim. Finish Standard Standard Tail Long Tail3(Using Pin Contacts)
Tail2Polarized2Universal Universal
MATE-N-LOK II MATE-N-LOK
6.550 Pre-tin 350827-1 643424-1 350834-1 770020-1 350715-1
13.97 Duplex1350827-4 643424-3 350834-4
9.800 Pre-tin 350828-1 643426-1 350835-1 770021-1 350720-1
20.32 Duplex1350828-4 643426-3 350835-4
12 1.050 Pre-tin 350829-1 643428-1 350836-1 770022-1 350735-1
26.67 Duplex1350829-4 — 350836-4
15 1.300 Pre-tin 350830-1 643430-1 350837-1 770023-1 350736-1
33.02 Duplex1350830-4 — 350837-4
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
2Use Standard Tail for .062 [1.57] thick PC Board.
3Use Long Tail for .125 [3.18] thick PC Board.
Note: All part numbers are RoHS Compliant.
199
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Headers for UMNL II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
Universal MATE-N-LOK Headers
.250 [6.35] Centerline
Recommended
PC Board
Hole Layouts
for Pin and Socket
Vertical Headers
Related Product Data
Vertical Headers — pages 197-198
5 Circuit
4 Circuit
3 Circuit
2 Circuit
Polarizing Hole
See Note
No. 1 Position
.250
[6.35]Typ.
Dia. Typ.
.070
[1.78]
.175
[4.45]
2, 3, 4 and 5
Circuit, In-Line
6, 9, 12 and 15
Circuit, Matrix
Polarizing Hole
See Note
.250
[6.35]Typ.
.250
[6.35]Typ. No. 1 Circuit
No. 2 Circuit
Polarizing Hole
See Note
.070
[1.78] Dia. Typ.
.175
[4.45]
.250
[6.35]Typ.
.250
[6.35]Typ.
No. 1 Circuit
No. 2 Circuit
250
.35]Typ. No. 1 Circuit
No. 2 Circuit
Polarizing Hole
See Note
.250
[6.35]Typ.
No. 1 Circuit
No. 2 Circuit
Polarizing Hole
See Note
.250
[6.35]Typ.
.250
[6.35]Typ.
.175
[4.45]
.070
[1.78] Dia. Typ.
.070
[1.78] Dia. Typ.
.175
[4.45]
.175
[4.45]
.070
[1.78] Dia. Typ.
Note: Polarizing hole .070 [1.78] Dia. required for polarized headers only.
PC Board Vertical
Pin Headers with
ACTION PIN Contacts
Material and Finish
Housing — PBT, black
Flammability Rating — UL94V-0
Contacts — Copper alloy, plated with
tin over nickel on entire contact
Related Product Data
Performance Characteristics—
pages 189-190
Technical Documents— pages 189
and 205-206
Product Specification
108-5222 ACTION PIN Universal
MATE-N-LOK Header
Assembly
Mating Connectors
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Universal MATE-N-LOK
Plug Housings — page 175
.299
[7.59] Typ.
A
.250
[6.35]
.200
[5.08 ]
± .004
± 0.10
.630
[16.00]Max.
Recommended PC Board Hole Layout
2 Circuit
3 Circuit
4 Circuit
.062
[1.57]Ref.
PC Board Hole Dimensions
.100
[2.54 ]
± .004
± 0.10 .200
[5.08 ]
± .004
± 0.10
Dia. After
Reflow
.032
[0.81 ]
± .002
± 0.05
.038
[0.97 ]
± .001
± 0.03 .0003-.0012
[0.01-0.03]
.001-.003
[0.03-0.08]
Mates with Plug Housing
Number of Part Number (Using Socket Contacts)
Circuits A Dim. Part Number Universal Universal
MATE-N-LOK II MATE-N-LOK
2.750 173924-1* 770017-1 350777-1
19.05
31.000 173925-1* 770018-1 350766-1
25.40
41.250 173926-1* 770019-1 350779-1
31.75
*Install in PC Board with arbor tool.
Note: All part numbers are RoHS Compliant.
200
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Headers for UMNL II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Headers
.250 [6.35] Centerline Standard Density
PC Board Right-Angle
Pin and Socket Headers
.250 [6.35] Centerline spacing
Material
Housing — Nylon
Flammability Rating — UL 94V-0
Contacts — Phosphor bronze
Solder tail width .052 [1.32]
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board Headers
Performance Characteristics—
pages 189-190
Technical Documents— pages 189
and 205-206
Mating Connectors
Universal MATE-N-LOK II
Plug Housings — pages 193-194
Universal MATE-N-LOK
Plug Housings — page 175
Part Numbers
Number of Dimensions Contact Right-Angle Header Mates with Plug Housing
Circuits ABC
Finish Pin Socket Universal Universal
MATE-N-LOK II MATE-N-LOK
2.550 1.245 .830 Pre-tin 1-350942-0 643226-1 770017-1 350777-1
13.97 31.62 21.08 Duplex13-350942-0 —
3.800 1.495 1.080 Pre-tin 1-350943-0 643228-1 770018-1 350766-1
20.32 37.97 27.43 Duplex13-350943-0 3-643228-0
41.050 1.745 1.330 Pre-tin 1-350944-0 643230-1 770019-1 350779-1
26.67 44.32 33.78 Duplex13-350944-0 3-643230-0
51.300 1.995 1.580 Pre-tin 1-350945-0 643232-1 770016-1 350809-1
33.02 50.67 40.13 Duplex13-350945-0 3-643232-0
1Duplex Finish — Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
[.00127] min. nickel underplate on entire contact.
Note: All part numbers are RoHS Compliant.
.680
[17.27]
.360
[9.14]
.250
[6.35]
.160
[4.06]
Recommended PC Board Hole Layout
.062 [1.57] Board Thickness
.060
[1.52]
.150
[3.81]
2 Places
.505
[12.83]
.290
[7.37]
.250
[6.35]
Typ.
.100
[2.54]
No. 1 Circuit
Dia.
Dia. Typ.
Typ.
2, 3, 4 and 5 Circuit, In-line
Use 6-32 UNC Pan Head Screw
3/8 [9.53] long for mounting
(Not Supplied)
201
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Headers for UMNL II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
Universal MATE-N-LOK Headers
.250 [6.35] Centerline
High Current Contacts
The Louvertac bands have the versatility
of being designed into contact dimen-
sions used in existing AMP connectors.
Universal MATE-N-LOK II High Current
contacts have been designed to fit into
an existing Universal MATE-N-LOK II
housing. An initial T-Rise test of a
fully energized 4 circuit connector with
10 gage wires has shown a 31 amp
capability per line with a 30° T-rise.
Cable-to-Cable
Material
Body — Copper Alloy
Louvertac Band — Beryllium Copper
Finish — Silver
Contact Extraction Tool No. 318851-1
Latch Disengaging Tool No. 58382-1
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
■Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
Design Objective —108-1583
Application Specification—
114-16021
R
R
Connector Housings
No. of Kit Part Numbers
CircuIts Plug Cap
2 770017-1 770024-1
3 770018-1 770025-1
4 770019-1 770026-1
5 770016-1 —
6 770020-1 770027-1
9 770021-1 770028-1
12 770022-1 770029-1
15 770023-1 770030-1
Cable-to-Right-Angle Board
Material
Housing — UL 94V-0 Nylon
Contact Body — Copper Alloy
Louvertac Band — Beryllium Copper
Finish — Silver
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
■Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
Design Objective —108-1594
R
R
Connector Housings
No. of Part Numbers
CircuIts Socket Header Mates with Plug Housing
2 193839-1 770017-1
3 193839-2 770018-1
4 193839-3 770019-1
5 193839-4 770016-1
Notes: 1. High Current contacts with Louvertac bands are not intermateable with any other contact.
2. Additional information on connectors is available in AMP High Current Products Catalog 65141.
3. Additional information on contacts is available in AMP Precision Pin and Socket Contacts
Catalog 65910.
Standard
MATE-N-LOK II Pin
Standard
MATE-N-LOK II
Socket
High Current Socket
Part No. 193797-1
High Current Pin
Part No. 193796-1
Plug
Part No. 770020-1
Cap
Part No. 770027-1
Plug
Part No. 770019-1
Right-Angle Receptacle
Part No. 193839-3
Contacts
Wire Size Contact Part Numbers Crimp Tools
AWG Pin Socket
10 193796-1 193797-1 Daniels
Hand Tool #M310 or AMP P/N 356114-1
12-14 193841-1 193842-1 Positioner #TP1013 or AMP P/N 356337-1
Note: High Current contacts are not intermateable with any other Universal MATE-N-LOK contact.
Note: All part numbers are RoHS Compliant.
202
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Headers for UMNL II Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Headers
.250 [6.35] Centerline Standard Density
15 Circuit
Part No. 194013-1
.80
[20.32]
1.30
[33.02]
.25
[6.35] Typ.
.55
[13.97]
.17
[4.32]
.03
[.76]
High Current
Vertical Pin Headers
High Current Universal MATE-N-LOK II
Vertical Pin Headers are designed to
accept Universal MATE-N-LOK II Plugs
with High Current Socket contacts. All
housings are polarized in order to allow
proper circuit board placement. Eight
versions are available from 2 circuit to
15 circuits.
Material
Housing — UL 94V-0 Nylon
Contacts — Copper Alloy
Finish — Silver
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR7189
■Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
Design Objective —108-1594
R
R
Notes: 1. High Current contacts with Louvertac bands are not intermateable with any other contact.
2. Additional information on connectors is available in AMP High Current Products Catalog 65141.
2 Circuit
Part No. 194009-1
6 Circuit
Part No. 194002-1
3 Circuit
Part No. 194017-1
9 Circuit
Part No. 194012-1
4 Circuit
Part No. 194010-1
12 Circuit
Part No. 194014-1
5 Circuit
Part No. 194018-1
.35
[8.89]
.55
[13.97]
.17
[4.32]
.03
[.76]
.55
[13.97]
.250
[6.35] Typ.
.80
[20.32]
.55
[13.97]
.250
[6.35] Typ.
.55
[13.97]
.17
[4.32]
.03
[.76]
.30
[7.62]
.80
[20.32]
.25
[6.35] Typ.
.55
[13.97]
.17
[4.32]
.03
[.76]
.80
[20.32]
.80
[20.32]
.25
[6.35] Typ.
.55
[13.97]
.17
[4.32]
.03
[.76]
.30
[7.62]
1.05
[26.67]
.25
[6.35] Typ.
.55
[13.97]
.17
[4.32]
.03
[.76]
.80
[20.32]
1.05
[26.67]
.25
[6.35] Typ.
.55
[13.97]
.17
[4.32]
.03
[.76]
.30
[7.62]
1.30
[33.02]
.25
[6.35] Typ.
.55
[13.97]
.17
[4.32]
.03
[.76]
203
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.156 MATE-N-LOK Connectors
AMP
Soft Shell
Pin and Socket Connectors
.156 MATE-N-LOK Connectors
.390 [9.91] Centerline
Standard Density
Product Facts
■Positive polarized nylon
housings
■Panel mount or free-hanging
■Numbered cavities for easy
circuit identification
■Removable, crimp snap-in
contacts
■Contacts accept 20-10 AWG
wire sizes
■Pin contacts are used in cap
housings, socket contacts
are used in plug housings
■Not for interrupting current
■Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
■Certified by Canadian
Standards Association File
No. LR7189
R
Wire Size Ins. Dia. Contact Part Number HDM1Hand Tool
Range Pin Socket Applicator
AWG [mm2]Range Strip Form Loose Piece Strip Form Loose Piece Part No. Part No.
20-14 466462-1
[.5-2.0] .125 max. 61086-1 61251-1 61085-1 61250-1 466462-2 58631-1
466462-3
12-10 .185 max. 61234-1 61253-1 61233-1 61252-1 687765-2 58632-1
[3.0-6.0] 687765-3
1To be used with appropriate application machine. See pages 201-204 for further information.
Note: All part numbers are RoHS Compliant.
.925
[2.35]
Pin
Used in Caps
Socket
Used in Plugs
.760
[1.93]
Insertion Tool
Part No. 91002-1
(IS 408-7347)
Extraction Tool
Part No. 691458-1 (Pins)
Part No. 691458-2 (Sockets)
(IS 408-4322)
Contacts
Pin diameter .156 [3.96]
Material and Finish
Contacts—
Brass, Pre-tin plated
Stock thickness .018 [.457]
204
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
.156 MATE-N-LOK Connectors (Continued)
AMP
Soft Shell
Pin and Socket Connectors
.156 MATE-N-LOK Connectors
.390 [9.91] Centerline Standard Density
.430
[10.92]
A
1.220
[30.99]
.390
[9.91]
1.220
[30.99]
A
.430
[10.92]
.390
[9.91]
.210
[5.33]
.370
[9.40]
.480
[12.19]
.180
[4.57]
1.17
[29.72]
.450
[11.43]
Ref.
1.91
[48.51]
Ref.
R .225
[5.72]
4 Plc.
1.020
[25.91]
.460
[11.68]
A
.430
[10.92]
.390
[9.91]
Pin Housing (Cap)
Free-Hanging
Part Number 794117-1
Pin Housing (Cap)
Panel Mount
Part Number 794118-1
Socket Housing (Plug)
Part Number 794116-1
Panel Mount Cutout
Housings
Free-Hanging or Panel Mount
Related Product Data
Contacts—page 203
Product Specification
108-8002
Application Specification
114-1109
Material
Housings—
Nylon, Natural Color
Flammability Rating—UL94V-2
Number of A Cap
Circuits Dim. Plug Free-Hanging Panel Mount
3.048 794412-1 794413-1 —
1.210
4.063 794116-1 794117-1 794118-1
1.590
Note: All part numbers are RoHS Compliant.
Note: Panel must be punched in the same
direction as the housing will be inserted.
205
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Technical Documents
AMP
Soft Shell
Pin and Socket Connectors
Technical Documents
Related Product Data
Connectors
2.5 mm Signal Double Lock (SDL)—
pages 9-16
Micro MATE-N-LOK 3 mm—
pages 17-47
Grace Inertia Connectors
(GIC) 3.5—pages 49-52
.062 Commercial Pin and
Socket—pages 53-57
Power Double Lock (PDL)—
pages 59-81
Mini Universal MATE-N-LOK—
pages 83-94
Mini Universal MATE-N-LOK 2—
pages 99-107
(MR) Miniature Rectangular—
pages 109-118
VAL-U-LOK Connector System—
pages 119-124
AMP-DUAC—pages 125-133
5.0 mm Power Key Connectors
(PKC)—pages 135-141
.093 Commercial Pin and
Socket—pages 143-149
Commercial MATE-N-LOK—
pages 151-162
.140 MATE-N-LOK—pages 165-167
Universal MATE-N-LOK—
pages 169-188
Universal MATE-N-LOK II—
pages 189-195
.156 MATE-N-LOK—pages 203-204
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineer.
108-1000 Commercial MATE-N-LOK Connectors
108-1022 (MR) Miniature Rectangular Connectors
108-1031 Universal MATE-N-LOK Connectors
108-1031-1 Splash Proof Seal, Universal MATE-N-LOK Connectors
108-1032 .140 Diameter MATE-N-LOK Pin and Socket Connectors
108-1037 .062 Commercial Pin and Socket Connectors
108-1037-1 .062 Commercial Pin and Socket Contacts
108-1038 .093 Commercial Pin and Socket Connector
108-1053 Universal MATE-N-LOK Printed Circuit Board Headers
108-1077 Commercial MATE-N-LOK Printed Circuit Board Headers
108-1078 (MR) Miniature Rectangular Printed Circuit Board Headers
108-1090 Universal MATE-N-LOK II Connectors
108-1542 Mini-Universal MATE-N-LOK Connectors
108-1542-2 Splash Proof Seals for Mini-Universal MATE-N-LOK Connectors
108-1543 Mini-Universal MATE-N-LOK Headers
108-1594 Universal MATE-N-LOK Headers with High Current Contacts
108-1693 Mini-Universal MATE-N-LOK II Connectors
108-1694 Mini-Universal MATE-N-LOK II Headers
108-1699 AMP-DUAC Headers
108-1836 Micro MATE-N-LOK 3 mm Connectors
108-2069 Universal MATE-N-LOK Circular Connector
108-5138 Mini-Universal MATE-N-LOK Connectors (UL 94V-0)
108-5151 Mini-Universal MATE-N-LOK Connectors (UL 94V-2)
108-5155 Commercial MATE-N-LOK Pin Header Assembly
108-5222 Universal MATE-N-LOK Headers with ACTION PIN Contacts
108-5410 Power Double Lock (PDL) Connectors
108-5439 Power Double Lock (PDL) Connectors (SMT)
108-5459 2.5 mm Signal Double Lock (SDL) Connectors
108-5699 5.0 mm Power Key Connectors (PKC)
108-5810 Grace Inertia Connectors (GIC) 3.5
108-8002 .156 Diameter MATE-N-LOK Connectors
108-19099 AMP-DUAC Receptacles
108-49000 Commercial MATE-N-LOK IDC Insulation Displacement Connectors
Application Specifications describe requirements for using the product in its intended appli-
cation and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-1007 .140 Diameter MATE-N-LOK Contacts
114-1010 Universal MATE-N-LOK Connectors
114-1012 Commercial MATE-N-LOK Contacts
114-1013 .062 Commercial Pin and Socket Connectors
114-1014 (MR) Miniature Rectangular Contacts
114-1043 Universal MATE-N-LOK II Connectors (housings, contacts and strain reliefs)
114-1109 .156 Diameter MATE-N-LOK Connectors
114-1111 Mini-Universal MATE-N-LOK 2 Connectors
114-5175 Power Double Lock (PDL) Connectors
114-5203 2.5 mm Signal Double Lock (SDL) Connectors
114-5292 5.0 mm Power Key Connectors (PKC)
114-5306 Grace Inertia Connectors (GIC) 3.5
114-6067 AMP-DUAC Crimping Contacts
114-13000 Micro MATE-N-LOK 3 mm Connectors
206
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Technical Documents (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Technical Documents
114-13089 Mini-Universal MATE-N-LOK Sealed Connectors
114-16017 Mini-Universal MATE-N-LOK Connectors
114-19048 AMP-DUAC Receptacles (Use of)
114-49000 .093 Commercial Pin and Socket Connectors
114-49001 Commercial MATE-N-LOK IDC Insulation Displacement Connectors
Instruction Sheets provide instructions for assembling or applying the product. They are in-
tended for the Manufacturing Assembler or Operator.
408-3186 Terminating Head (PN 231894-1) (Commercial MATE-N-LOK IDC Connector)
408-3200 Universal MATE-N-LOK II Connectors (Housings, Contacts and Accessories)
408-3231 (MR) Miniature Rectangular Connectors (Pin Housing, Socket Housing,
Contacts, and Accessories)
408-3234 Mini-Universal MATE-N-LOK Connectors
408-3320 Universal MATE-N-LOK Strain Relief Assembly and Keying Plug
408-3392 Universal MATE-N-LOK Splash Proof Seals
408-3393 Mini-Universal MATE-N-LOK 2 Connectors
408-4118 Contact Extraction Tool (PN 189727-1)
408-4322 Contact Extraction Tools [PN 691458-1 (Pins) and 691458-2 (Sockets)]
408-4370 Contact Extraction Tool (PN 318831-1)
408-4371 Contact Extraction Tool (PN 318851-1)
408-4375 Contact Extraction Tool (PN 318837-1)
408-4378 Extraction Tool (PN 318845-1)
408-6790 Hand Tool Handle (PN 58074-1)
408-7158 Contact Extraction Tools [PN 1-305183-1 (Pins) and 1-305183-2 (Sockets)]
408-7166 Commercial MATE-N-LOK Panel Mount Connector
408-7200 Commercial MATE-N-LOK Free-Hanging Connector
408-7201 Commercial MATE-N-LOK Detent Engagement Connectors, 2 and 3 circuit
408-7209 Commercial MATE-N-LOK Commoning Tabs
408-7211 Pin and Socket Extraction Tool (PN 465644-1)
408-7215 Commercial MATE-N-LOK Single Circuit Connector
408-7300 MATE-N-LOK Contact and Housing Selection Charts
408-7347 Contact Insertion Tool (PN 91002-1)
408-7582 Commercial MATE-N-LOK Keying Plug
408-7714 Universal MATE-N-LOK Connectors
408-7763 Power Unit (PN 91112-2)
408-7984 Contact Insertion Tool (PN 455830-1)
408-9330 Head (PN 231920-2) (Used with Arbor Tool PN 91085-2)
408-9436 Latch Disengaging Tool (PN 58382-1)
408-9570 Contact Extraction Tool (PN 455822-2)
408-10003 Contact Retention Test Tool (PN 1586700-1)
408-10017 Universal MATE-N-LOK Sealed Bulkhead Connectors
411-5105 Mini-Universal MATE-N-LOK Connectors
411-5638 Power Double Lock (PDL) Connectors
Application Specifications (Continued)
207
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling
AMP
Soft Shell
Pin and Socket Connectors
Application Tooling
Semiautomatic bench crimping
machines that also strip the
wire, and are therefore used for
terminating jacketed cable.
Feature manual precision
adjustment of crimp height,
keyed strip blades for faster,
more accurate setups, and an
efficient scrap removal system.
All adjustments can be made
from the front of the machines
without special tools. Available
with crimp quality monitoring.
Specifications
Width—14 [355]
Depth—18 [457]
Height—33 [838] without reel
Weight—150 lb [68 kg]
Electrical—120 VAC, 50 or 60 Hz, .5 A
Air—80-100 psi [5.52-6.90 bar], 3.5
scfm [0.00165 m3/s]
Wire Range—32-14 AWG
[0.03-2 mm2]
For more information, request Catalog
65004.
AMP-O-LECTRIC Model “G”
Terminating Machines,
354500-1, -9, -11
AMP-O-MATIC
Stripper-Crimper Machine,
854040-3, -4
Semiautomatic Machines
Semiautomatic bench machines
for crimping reeled terminals
and contacts, featuring a quiet
and reliable direct motor drive,
microprocessor controls for
ease of setup and operation,
and guarding and lighting
designed for operator conven-
ience and safety. All models
are equipped with either
manual or automatic precision
adjustment of crimp height.
Machine-mounted sensors are
available for crimp quality
monitoring using conventional
miniature-style applicators.
Specifications
Width—18.7-25.3 [475-643] depend-
ing on applicator type
Depth—21.5-28.1 [546-713] depend-
ing on applicator type
Height—20 [508]
Weight—240 lb [110 kg]
Electrical—120 or 220 VAC, 50 or 60 Hz
Air—90-110 psi [6.21-7.59 bar],
6 scfm [0.00282 m3/s] when required
with air-feed applicators
Wire Range—26-10 AWG [0.12-6
mm2] solid or stranded, depending on
product applied
For more information, request Catalog
65828, Catalog 82275 [Crimp
Quality Monitor (CQM)].
Crimp Quality Monitor
This system measures the crimp
height of each termination as it
is made. It also evaluates the
quality of each crimp. If a crimp
is questionable, the monitor
alerts the operator with both
visual and audible alarms. It
also features ports for printing
and networking. For use with
AMP-O-LECTRIC Model “G”
and AMP-O-MATIC Stripper-
Crimper Machines, the monitor
is mounted to the machine. For
use with AMPOMATOR CLS IV+
Machines, it is integrated into
the machine’s operating system,
with the displays appearing on
the machine’s touch screen.
For more information, request Catalog
82275.
Note: This listing is for reference purposes only. To obtain part numbers for specific applications call Technical Support.
As value oriented terminators,
the AMP 3K/40 and AMP 5K/40
are designed for customers
that require the increased
output and quality of a semi-
automatic machine at a com-
petitive price. By incorporating
the most commonly requested
features as standard and
offering a long list of optional
equipment, these terminators
offer flexibility to meet the
specific needs of various
applications at the lowest
possible cost.
AMP 3K/40 and AMP 5K/40
Terminators
The combination of the
Stripping Module with the
AMP-O-LECTRIC Model G
Terminator or the AMP 3K/40,
5K/40 provides an economical,
proficient method of stripping
wire and crimping terminals
on the same machine. Wires
are stripped moments before
crimping, meaning there is
virtually no chance of damag-
ing wire conductors during
handling or storage. Once the
wire is fed into the start sensor
the Stripping Module does the
rest, improving placement
accuracy.
For more information, request
Catalog 1309085.
Optional Stripping Module for the AMP 3K/40, AMP 5K/40
and AMP-O-LECTRIC Model G Terminators
208
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Application Tooling
Automatic Machines
EDGE Electronic Applicator
Counter
Fully-automatic machines
that measure, cut, strip
and terminate single leads.
Microprocessor-controlled, and
programmed and operated
using an easy-to-follow, menu-
driven touchscreen. Features
include direct-drive terminating
units with precision crimp height
adjustment, fully programmable
setups, wire runout and splice
detection, and motorized
pre-feed with wire straightener.
Crimp quality monitoring is
also available.
Specifications
Width—159 [4 039]
Depth—68 [1 730]
Height—90 [2 285] min., with
24 [610] dia. reel
Weight—2 000 lb [907 kg]
Electrical—220 VAC, 50 or 60 Hz,
1∅, 20 A with neutral and ground
Air—90 psi [6.21 bar], 15 scfm
[0.00708 m3/s] sustained
Wire Range—26-10 AWG
[0.12-6 mm2] stranded, 26-16 AWG
[0.12-1.4 mm2] solid
Lead Lengths—3-90 [76.2-2 286],
90-1 000 [2 286-25 400] with long lead
conveyors
For more information, request Catalog
124324.
AMPOMATOR CLS IV+
Lead-Making Machines,
356500-1, -2
The AMPOMATOR System III
Leadmaker is designed for
the demands of low-volume/
high-mix manufacturing and
precision quality. This lead-
maker combines the best wire
processing capabilities with
new technologies in terminal
feeding and machine set-up
found in the System III
Applicator to offer significant
advantages for higher through-
put and efficiencies.
Request Catalog 1654956-5.
AMPOMATOR System III
Leadmaker
The new, versatile EDGE appli-
cator counter tracks wearable
tool usage for the most effec-
tive maintenance planning. The
completely electronic counter,
with clear LCD display, indi-
cates cycles since installation.
By performing maintenance at
measured intervals with pre-set
limits, operators avoid break-
downs and rejects caused by
tool wear or mis-adjustment.
For more information, request Catalog
1773385.
The System III Applicator
introduces several new
technologies into the applicator
including a precision servo-
electric motorized feeding
system, a built-in data module
for storing terminal crimp and
set-up information, a precision
fit round ram, and a newly
designed terminal depressor.
It still utilizes the proven quality
of the HD-M crimper and
anvil tooling.
System III Applicator
209
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Application Tooling
Applicator Styles
Applicator and Hand Tool
Selection Guide
Related Product Data
Contacts
2.5 mm Signal Double Lock (SDL)—page 12
Micro MATE-N-LOK 3 mm—page 22
Grace Inertia Connectors (GIC) 3.5—page 50
.062 Commercial Pin and Socket—page 55
Power Double Lock (PDL)—page 61
Mini Universal MATE-N-LOK—page 84
Mini Universal MATE-N-LOK 2—pages 100-101
(MR) Miniature Rectangular—page 112
VAL-U-LOK Connector System—page 120
AMP-DUAC—pages 126-127
5.0 mm Power Key Connectors (PKC)—page 137
.093 Commercial Pin and Socket—page 145
Commercial MATE-N-LOK—pages 155-156
.140 MATE-N-LOK—page 166
Universal MATE-N-LOK—pages 172-173
Universal MATE-N-LOK II—page 192
.156 MATE-N-LOK—page 203
Stripper-Crimper (SCA)
Applicators
End- and Side-Feed Heavy-
Duty Miniature (HDM)
Applicators
Crimp Quality Monitor
(CQM) Applicators
■For use with AMP-O-MATIC
Stripper-Crimper Machines
■Terminate a wide variety of
open-barrel products
■Quickly interchangeable to
run different products
■Easily repaired
■Simple dial-in settings to
handle similar products and
various wire sizes
■CQM applicators are
available
■Handle a wide variety of
products
■Used with both semi- and
fully-automatic machines
■Quickly interchangeable to
run different products
■Easily repaired
■Simple dial-in settings to
handle similar products
and various wire sizes
■Same basic features as
regular HDM and SCA
applicators
■Recommended for use
with machines featuring
manual or automatic
precision-adjust
■Use two built-in sensors to
provide the Crimp Quality
Monitor with data to
measure crimp height,
and evaluate the quality of
each crimp
Note: This listing is for reference purposes only. To obtain part numbers for specific applications call Technical Support.
Mechanical Hand Tools CERTI-CRIMP II Straight
Action Hand Tools (SAHT)
91501-1, 91502-1
Premium grade hand tools.
Feature ratchet control to
provide complete crimp
cycle. Die sets close in a
straight line. Include a con-
tact locator and wire stop,
plus an insulation crimp
adjustment lever, when
applicable. Approximate
weight 1.3 lb [0.59 kg]
For more information, request
Catalog 65780.
Applicators Hand Tools
Density Product Line ABC DE
2.5 mm Signal Double Lock (SDL) *** X-
Micro MATE-N-LOK 3 mm XXX X-
Grace Inertia Connectors (GIC) 3.5 *** X-
.062 Commercial Pin and Socket XXX -X
High Power Double Lock (PDL) *** X-
Mini-Universal MATE-N-LOK XXX XX
Sealed Mini-Universal MATE-N-LOK XXX X-
Mini-Universal MATE-N-LOK 2 XXX XX
(MR) Miniature Rectangular XXX X-
VAL-U-LOK Connector System X-- -X
AMP-DUAC XX- X-
5.0 mm Power Key Connectors (PKC) *** X-
.093 Commercial Pin and Socket XXX -X
Standard Commercial MATE-N-LOK XXX XX
.140 MATE-N-LOK XXX X-
Universal MATE-N-LOK XXX XX
Universal MATE-N-LOK II XXX XX
.156 MATE-N-LOK X-- X-
A—Heavy Duty Miniature (HDM) Applicators
B—Stripper-Crimper Applicators (SCA)
C—Crimp Quality Monitor (CQM) Applicators
D—CERTI-CRIMP Hand Tool
E—PRO-CRIMPER III Commercial Hand Tool
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Numbers.
210
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Application Tooling
Hand Tools
Related Product Data
Contacts
2.5 mm Signal Double Lock
(SDL)—page 12
Micro MATE-N-LOK 3 mm—page 22
Grace Inertia Connectors (GIC)
3.5—page 50
.062 Commercial Pin and
Socket—page 55
Power Double Lock (PDL)—page
61
Mini Universal MATE-N-LOK—
page 86
Mini Universal MATE-N-LOK 2—
pages 100-101
(MR) Miniature Rectangular—
page 112
VAL-U-LOK Connector System—
page 120
AMP-DUAC—pages 126-127
5.0 mm Power Key Connectors
(PKC)—page 137
.093 Commercial Pin and
Socket—page 145
Commercial MATE-N-LOK—
pages 155-156
.140 MATE-N-LOK—page 166
Universal MATE-N-LOK—
pages 172-173
Universal MATE-N-LOK II—page 192
.156 MATE-N-LOK—page 203
Features CERTI-CRIMP Hand Tool PRO-CRIMPER III Hand Tool
Field Repair/Prototyping X X
OEM Applications/Low Volume Production X—
Ratchet Control XX
Brush/Bellmouth Control XX
Precision Crimp Height Control XX
Little/No Operator Training X—
Insulation Adjustment X—
Repairable X—
CERTI-CRIMP II Hand Tool PRO-CRIMPER III Hand Tool
Catalog 65780 Catalog 82276
CERTI-CRIMP Hand Tool PRO-CRIMPER III Hand Tool
Density Product Line Part Number Instruction Sheet Part Number Instruction Sheet
2.5 mm Signal Double Lock (SDL) 234603-1 411-5735 ——
234604-1 411-5736 ——
Micro MATE-N-LOK 3 mm 91501-1 408-8547 ——
91502-1 408-8547 ——
Grace Inertia Connectors (GIC) 3.5 1596277-1 411-78101 ——
.062 Commercial Pin & Socket ——90870-1 408-9965
——90869-1 408-9964
Power Double Lock (PDL) 91567-1 408-8547 ——
91569-1 408-8547 ——
Mini-Universal MATE-N-LOK 91529-1 408-8547 90758-1 408-9938
High and 91522-1 408-8547 90759-1 408-9962
Sealed Mini-Universal MATE-N-LOK 91594-1 408-8547 90760-1 408-9963
90717-2 408-4443 ——
91529-1 408-8547 ——
Mini-Universal MATE-N-LOK 2 91522-1 408-8547 ——
91594-1 408-8547 ——
90717-2 408-4443 ——
(MR) Miniature Rectangular 91534-1 408-8547 58514-1 408-9973
91526-1 408-8547 58514-1 408-9973
VAL-U-LOK Connector System ——91387-1 408-8917
——91388-1 408-8918
AMP-DUAC 90714-1 408-4385 ——
734202-2 ———
5.0 mm Power Key Connectors (PKC) —— ——
.093 Commercial Pin & Socket ——90872-1 408-9967
——90871-1 408-9966
91515-1 408-8547 ——
Commercial MATE-N-LOK 91512-1 408-8547 90574-1 408-9886
91504-1 408-8547 90575-1 408-9887
91552-1 408-8547 ——
.140 MATE-N-LOK 69710-11408-2095 ——
58373-12408-9442 ——
Standard 58374-12408-9442 ——
58439-1 408-9591 ——
91510-1 408-8547 90548-1 408-9885
Universal MATE-N-LOK 91500-1 408-8547 90546-1 408-9883
and 91508-1 408-8547 90547-1 408-9884
Universal MATE-N-LOK II 91506-1 408-8547 90547-1 408-9884
69710-11408-2095 ——
58380-12408-9433 ——
58380-22408-9433 ——
.156 MATE-N-LOK 58631-1 408-4341 ——
58632-1 408-4340 ——
1Hand tool requires die set. 2Die set.
Note: This listing is for reference purposes only. To obtain part numbers for specific applications call Technical Support.
211
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Applicator Options
AMP
Soft Shell
Pin and Socket Connectors
Applicator Options
Strip Form Contact Heavy-Duty Miniature Applicator Part Numbers
Part Number Used on Bench Top Terminators Used on Automatic Leadmaking Used on
Pin Socket AMP-O-LECTRIC AMP-O-LECTRIC Equipment (AMPOMATOR CLS AMP-O-MATIC
Model K Machine Model G Machine Machine with T or G Terminators) Stripper-Crimper Machine
917764-1 917683-1 ** * *
917765-1 917684-1 ** * *
1-794608-0 —
1-794608-1 — 1385194-2 1385194-3 1385194-1 —
1-794608-2 —
1-794609-0 —
1-794609-1 — 1385377-2 1385377-3 1385377-1 —
1-794609-2 —
— 794606-1
— 1-794606-1 680893-2 680893-3 680893-1 —
— 1-794606-2
— 794607-1
— 1-794607-1 680894-2 680894-3 680894-1 —
— 1-794607-2
1565080-1 1565079-1 ** * *
1612335-1 1612334-1 ** * *
640391-1 640392-1
640391-5 640392-5 466686-2 466686-3 466686-1 466955-1
— 640392-2
— 794046-1
350629-1 350628-1
— 350628-2
350629-5 350628-5 687996-2 687996-3 687996-1 —
— 350628-6
— 794103-1
177916-1 177914-1 ** * *
177914-2† ** * *
177917-1 177915-1 ** * *
177915-2† ** * *
† High contact pressure type.
770835-1 770834-1
1-770835-0 1-770834-0 567418-2 567418-3 567418-1 —
770901-1 770902-1
1-770901-0 1-770902-0 567066-4 567066-5 567066-3 466990-2
770903-1 770904-1
1-770903-0 1-770904-0 567067-2 567067-3 567067-1 466986-1
171636-1 171637-1
— 171637-3 680582 567251-1 680582 567902-1
794216-1 794217-1
1-794216-0 1-794217-0 567418-2 567418-3 567418-1 —
794218-1 794219-1
1-794218-0 1-794219-0 567066-4 567066-5 567066-3 466990-2
794220-1 794221-1
1-794220-0 1-794221-0 680854-2 680854-3 680854-1 466986-1
794222-1 794223-1
1-794222-0 1-794223-0 680582-2 680582-3 — 567902-1
350968-1 794000-1
350968-2 794000-2 466352-2 466352-3 466352-1 —
350967-1 641294-1
350967-2 641294-2 466351-2 466351-4 466351-1 466913-1
350969-1 —
350969-2 — 466351-2 466351-4 466351-1 466913-1
2.5 mm Signal Double
Lock (SDL) Contacts
Grace Inertia
Connectors (GIC) 3.5
Power Double Lock
(PDL)
Micro MATE-N-LOK
3 mm Connector
System
.062 Commercial Pin
and Socket Contacts
Mini-Universal
MATE-N-LOK 2
Contacts
Mini-Universal
MATE-N-LOK
Contacts
(MR) Miniature
Rectangular
Contacts
Note: Stripper Crimper (SCA) and Crimp Quality Monitor Applicators may be available. Call Technical Support for Part Numbers.
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Numbers.
Note: All part numbers are RoHS Compliant.
212
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Applicator Options (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Applicator Options
Strip Form Contact Heavy-Duty Miniature Applicator Part Numbers
Part Number Used on Bench Top Terminators Used on Automatic Leadmaking Used on
Pin Socket AMP-O-LECTRIC AMP-O-LECTRIC Equipment (AMPOMATOR CLS AMP-O-MATIC
Model K Machine Model G Machine Machine with T or G Terminators) Stripper-Crimper Machine
794955-1 794956-1
794955-2 794956-2 1385817-2 1385817-3 1385817-1 —
794955-3 794956-3
794955-4 794956-4
794957-1 794958-1
794957-2 794958-2 1385448-2 1385448-3 1385448-1 —
794957-3 794958-3
794957-4 794958-4
794576-1 106529-2 680308-2 680308-3 — 567959-1
1-794138-3
794578-1 106528-2 680307-2 680307-3 — 567960-1
1-794139-3
— 1-794140-3 680350-2 680350-3 ——
794418-1
— 1376347-1 ** * *
— 1376348-1 ** * *
350418-1 350417-1
— 350417-3 466656-2 466656-3 466656-1 466922-1
350418-5 350417-5
350416-1 350415-1 466878-2 466878-3 466878-1 466959-1
350416-5 350415-5
770530-1 770529-1 567337-4 567337-6 567337-3 —
770385-1 770383-1
——
567273-2 567273-4 567273-3 —
350079-1 350078-1
350079-4 350078-4 466426-2 466426-3 466426-1 —
350079-5 350078-5
61116-1 61314-1
61116-4 61314-4
61116-5 61314-5 466320-2 466320-4 466320-1 466917-1
61116-6 61314-6
61116-7 61314-7
61118-1 61117-1
61118-4 61117-4
61118-5 61117-5 687763-2 687763-6 687763-1 466920-1
61118-6 61117-6
61118-7 61117-7
350558-1 350557-1
350558-4 350557-4 687898-2 687898-4 687898-1 —
61527-2 — 466320-2 466320-4 466320-1 466917-1
61627-1 61626-1
61627-2 61626-2 567306-2 567306-3 567306-1 —
350201-1 350200-1
350201-2 350200-2 567309-2 567309-3 587309-1 —
350924-1 350925-1
350924-6 350925-6 466616-2 466616-3 ——
350561-1 350851-1
— 350570-1
350561-2 350851-2
— 350570-2
350561-7 350851-7 466320-2 466320-4 466320-1 466917-1
— 350570-7
350561-3 350570-3
— 350570-6
Note: Stripper Crimper (SCA) and Crimp Quality Monitor Applicators may be available. Call Technical Support for Part Numbers.
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Numbers.
Note: All part numbers are RoHS Compliant.
5.0 mm Power Key
Connectors (PKC)
.093 Commercial Pin
and Socket Contacts
Commercial
MATE-N-LOK
Contacts
.140 MATE-N-LOK
Contacts
Universal
MATE-N-LOK
Contacts
AMP-DUAC
VAL-U-LOK
Connector System
213
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Applicator Options (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Applicator Options
.156 MATE-N-LOK
Contacts
350218-1 350536-1
350218-2 350536-2
350218-7 350536-7 687763-2 687763-6 687763-1 466920-1
350218-3 350536-3
350218-6 350536-6
350538-1 350537-1
350538-2 350537-2
350538-7 350537-7 687926-2 687926-6 687926-1 466989-1
350538-3 350537-3
350538-6 350537-6
350873-1 350874-1
350873-3 350874-3 466588-2 466588-3 466588-1 —
350922-3 350923-3
350922-6 350923-6 466597-2 466597-3 466597-1 —
350922-4 350923-4
350699-1 —
350699-2 — 466320-2 466320-4 466320-1 466917-1
350699-7 —
350687-1 —
350687-2 — 687763-2 687763-6 687763-1 466920-1
350687-7 —
350700-1 —
350700-2 — 687926-2 687926-6 687926-1 466989-1
350700-7 —
770210-1 — 567216-2 567216-3 567216-1
350654-1 — 687763-2 687763-6 687763-1 466920-1
770234-3 — 466597-2 466597-3 466597-1
770011-6 770012-6 — 567252-4 567252-1 —
770009-1 —
1-770009-0 —
— 770010-3 — 567214-4 567214-1 567914-1
— 1-770010-0
770007-1 —
1-770007-0 —
— 770008-3 — 567213-4 567213-1 567913-1
— 1-770008-0
770005-1 —
1-770005-0 —
— 770006-3 — 567212-4 567212-1 —
1-770005-1 1-770006-0
770003-3 770004-3
1-770003-0 1-770004-0 — 567211-4 567211-1 —
770193-1 —
1-770193-0 — — 567213-4 567213-1 567913-1
770194-1 —
1-770194-0 — — 567212-4 567212-1 —
61086-1 61085-1 466462-1 466462-3 466462-1 —
61234-1 61233-1 687765-2 687765-2 ——
Strip Form Contact Heavy-Duty Miniature Applicator Part Numbers
Part Number Used on Bench Top Terminators Used on Automatic Leadmaking Used on
Pin Socket AMP-O-LECTRIC AMP-O-LECTRIC Equipment (AMPOMATOR CLS AMP-O-MATIC
Model K Machine Model G Machine Machine with T or G Terminators) Stripper-Crimper Machine
Note: Stripper Crimper (SCA) and Crimp Quality Monitor Applicators may be available. Call Technical Support for Part Numbers.
* Contact the Tooling Assistance Center (TAC) at 1-800-722-1111 for Applicator Part Numbers.
Note: All part numbers are RoHS Compliant.
Universal
MATE-N-LOK II
Contacts
Universal
MATE-N-LOK
Contacts (Continued)
214
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Feature Comparisons
AMP
Soft Shell
Pin and Socket Connectors
Product Feature Comparisons
2.5 mm Micro Grace .062 Power Mini- Sealed Mini- (MR) VAL-U-LOK
High Density Signal MATE-N-LOK Inertia Commercial Double Universal Mini- Universal Miniature Connector AMP-
Double 3 mm Connectors Pin & Lock MATE-N-LOK Universal MATE-N-LOK 2 Rectangular System DUAC
Lock (SDL) (GIC) 3.5 Socket (PDL) MATE-N-LOK
Wire AWG—
Maximum 20 20 18 18 16 16 18 16 18 18 18
Minimum 26 30 26 30 26 30 26 30 26 26 26
Current Rating —
10 AWG Wire ——— ——
14 AWG Wire ——————— — ———
16 AWG Wire ——14 ——
18 AWG Wire — ** 7 17 —9 9 10.5 699
20 AWG Wire 3—— ——
Max. Operating Voltage 50 250 300 250 300 600 600 600 250 600 600
(AC or DC)
Flammability Rating —
UL 94V-0 Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes
UL 94V-2 No No No Yes No Yes* No Yes No Yes Yes
Approvals —
UL Yes Yes Yes Yes Yes Yes Yes Submitted Yes Yes Yes
CSA Yes Yes Yes Yes Yes Yes Yes Submitted Yes Yes Yes
VDE Yes Yes — No Yes Yes Yes Submitted No — No
Contact Material —
Brass No Yes Yes Yes Yes Yes Yes Yes No Yes —
Phos. Bronze Yes Yes No Yes No Yes Yes No Yes Yes Yes
Plating Finish —
Tin Plating Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Gold Plating No Yes No Yes No Yes Yes Yes Yes Yes Yes
.156 [3.96]
Centerline Spacing — .098 .118 .137 .145 256 [6.50] .163 .163 .163 .165 .165 .165
[2.50] [3.00] [3.50] [3.68] .312 [7.92] [4.14] [4.14] [4.14] [4.20] [4.20] [4.20]
.512 [13.00]
Housings —
Panel Mount No Yes No Yes Yes Yes Yes No Yes Yes Yes
Free-Hanging Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes
Secondary Locking Latches Yes No Yes No Yes No No Yes No Yes Yes
Contact Position Control Yes No No No No No No Yes No No Yes
In-Line Config. Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes
Dual Row Config. No Yes Yes No Yes Yes Yes Yes No Yes Yes
Matrix Config. No No No Yes Yes Yes No Yes Yes No No
Accessories —
Strain Relief No No Yes No Yes Yes No No Yes No Yes
Keying Plug No No No No No Yes Yes Yes Yes No No
Seals No No No No No Yes Yes No No No No
Headers —
Vertical Yes Yes No No Yes Yes Yes Mini-Universal Yes Yes Yes
MATE-N-LOK
Blindmate No No No No No Yes Yes Mini-Universal No Yes No
MATE-N-LOK
Right-Angle Planned Yes No No No Yes Yes Mini-Universal No Yes Yes
MATE-N-LOK
Positions —
Minimum 2221112 2 222
Maximum 13 24 6912 24 10 24 36 24 24
* Wire-to-Wire Only.
** 5 A on 20 AWG*
215
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Product Feature Comparisons (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Product Feature Comparisons
5.0 mm .093 Commercial .140 Universal Universal .156
Standard Density Power Key Commercial MATE-N-LOK MATE-N-LOK MATE-N-LOK MATE-N-LOK II MATE-N-LOK
Connectors (PKC) Pin & Socket
Wire AWG—
Maximum 16 14 14 10 10 10 10
Minimum 24 24 30 20 30 30 20
Current Rating —
10 AWG Wire — 28 32.5
14 AWG Wire — 19 13 — 15 19 —
16 AWG Wire 10 ——
18 AWG Wire ———————
20 AWG Wire ———
Max. Operating Voltage (AC or DC) 300 250 250 600 600 600 600
Flammability Rating —
UL 94V-0 Yes No Yes No Yes Yes No
UL 94V-2 No Yes Yes Yes Yes No Yes
Approvals —
UL Yes Yes Yes Yes Yes Yes Yes
CSA Yes Yes Yes Yes Yes Yes No
VDE No No No No Yes Yes No
Contact Material —
Brass Yes Yes Yes Yes Yes Yes Yes
Phos. Bronze No Yes Yes Yes Yes Yes No
Plating Finish —
Tin Plating Yes Yes Yes Yes Yes Yes Yes
Gold Plating No Yes Yes No Yes Yes No
.198 [5.03] .200 [5.08]
Centerline Spacing — .197 [5.00] .250 [6.35] .240 [6.10] x .202 [5.13] .240 [6.10] .250 [6.35] .250 [6.35] .390 [9.91]
.248 [6.30] .195 [4.95] x .360 [9.14]
Housings —
Panel Mount No Yes Yes Yes Yes Yes Yes
Free-Hanging No Yes Yes Yes Yes Yes Yes
Secondary Locking Latches Yes No No Yes No Yes Yes
Contact Position Control No No No No No Yes No
In-Line Config. Yes Yes Yes Yes Yes Yes Yes
Dual Row Config. Yes No Yes No No No No
Matrix Config. No Yes Yes Yes Yes Yes No
Accessories —
Strain Relief Yes No No No Yes Universal No
MATE-N-LOK
Keying Plug No No Yes No Yes Yes No
Seals No No No No Yes No No
Headers —
Vertical Yes No Yes No Yes Universal No
MATE-N-LOK
Blindmate No No No No No No No
Right-Angle No No Yes No Yes Universal No
MATE-N-LOK
Positions —
Minimum 2112123
Maximum 6 15 16 9 15 15 4
* Wire-to-Wire Only.
** 5 A on 20 AWG*
216
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Non-Compliant to RoHS Compliant Part Number Cross Reference
350827-2 350827-4
350828-2 350828-4
350829-2 350829-4
350830-2 350830-4
350832-2 350832-4
350833-2 350833-4
350834-2 350834-4
350835-2 350835-4
350836-2 350836-4
350837-2 350837-4
2-350942-0 3-350942-0
2-350943-0 3-350943-0
2-350944-0 3-350944-0
2-350945-0 3-350945-0
350988-3 350988-5
350989-3 350989-5
350990-3 350990-5
350991-3 350991-5
1-380935-0 2-380935-0
1-380936-0 2-380936-0
1-380937-0 2-380937-0
2-380991-0 2-1586544-0
2-380999-0 2-1586546-0
640466-2 640466-3
640467-2 640467-3
640497-2 2-640497-2
640497-4 2-640497-4
640498-2 2-640498-2
640498-4 2-640498-4
640499-2 2-640499-2
640499-4 2-640499-4
640500-2 2-640500-2
640500-4 2-640500-4
640501-2 2-640501-2
640501-4 2-640501-4
640502-2 2-640502-2
640502-4 2-640502-4
640503-2 2-640503-2
640503-4 2-640503-4
640504-2 2-640504-2
640504-4 2-640504-4
640505-2 2-640505-2
640505-4 2-640505-4
640506-2 2-640506-2
640506-4 2-640506-4
640583-2 640583-3
640584-2 640584-3
640900-2 640900-3
640901-2 640901-3
641831-2 641831-3
641832-2 641832-3
641963-2 641963-3
641964-2 641964-3
641970-2 641970-3
641971-2 641971-3
641972-2 641972-3
641974-2 641974-3
641976-2 641976-4
643228-2 3-643228-0
643230-2 3-643230-0
643232-2 3-643232-0
Non-Compliant RoHS Compliant
Part Number Part Number
350209-2 1586512-2
350210-2 1586514-2
350211-2 1586515-2
350211-3 1586515-3
350212-2 1586518-2
350213-2 1586520-2
350214-2 1586522-2
350220-2 1586524-2
1-350375-0 2-350375-0
1-350376-0 2-350376-0
1-350377-0 2-350377-0
1-350378-1 2-350378-1
1-350379-1 2-350379-1
1-350380-1 2-350380-1
350424-2 1586525-2
350425-2 1586526-2
350426-2 1586528-2
350428-2 350428-4
350429-2 350429-4
350430-2 350430-4
350431-2 350431-4
350432-2 350432-4
350433-2 350433-4
350434-2 350434-4
350539-2 1586530-2
350541-2 1586532-2
350543-2 1586534-2
350544-2 1586536-2
350582-2 350582-4
350583-2 350583-4
350584-2 350584-4
350585-2 350585-4
350586-2 350586-4
350587-2 350587-4
350588-2 350588-4
350641-2 1586539-2
350711-2 350711-4
350712-2 350712-4
350713-2 350713-4
350714-2 350714-4
350714-3 350714-5
350732-2 350732-4
350737-2 350737-4
350738-2 350738-4
350742-2 350742-4
350759-3 350759-5
350760-3 350760-5
350761-3 350761-5
350762-3 350762-5
350763-3 350763-5
350764-3 350764-5
350765-3 350765-5
350786-2 350786-3
350787-2 350787-3
350789-2 350789-3
350790-2 350790-3
350792-2 350792-3
350793-2 350793-3
350824-2 350824-4
350825-2 350825-4
350826-2 350826-4
Non-Compliant RoHS Compliant
Part Number Part Number
643234-2 3-643234-0
643236-2 3-643236-0
643410-2 643410-3
643412-2 643412-3
643414-2 643414-3
643424-2 643424-3
643426-2 643426-3
770003-4 1-770003-0
770004-4 1-770004-0
770005-2 1-770005-0
770005-4 1-770005-1
770006-4 1-770006-0
770007-2 1-770007-0
770008-4 1-770008-0
770010-4 1-770010-0
770166-1 1-770166-0
770166-2 1-770166-1
770170-1 1-770170-0
770170-2 1-770170-1
770174-1 1-770174-0
770174-2 1-770174-1
770178-1 1-770178-0
770178-2 1-770178-1
770182-1 1-770182-0
770182-2 1-770182-1
770186-1 1-770186-0
770186-2 1-770186-1
770190-1 1-770190-0
770190-2 1-770190-1
770193-2 1-770193-0
770194-2 1-770194-0
770246-4 1-770246-0
770247-4 1-770247-0
770248-2 1-770248-0
770249-4 1-770249-0
770250-2 1-770250-0
770251-4 1-770251-0
770252-2 1-770252-0
770254-2 1-770254-0
770255-2 1-770255-0
770262-2 770262-3
770328-1 1586627-1
1-770328-1 1-1586627-1
770621-1 1-770621-0
770621-2 1-770621-1
770743-1 1-770743-0
770743-2 1-770743-1
770834-3 1-770834-0
770834-6 1-770834-1
770835-3 1-770835-0
770858-1 1-770858-0
770858-2 1-770858-1
770859-1 1-770859-0
770859-2 1-770859-1
770872-1 1-770872-0
770872-2 1-770872-1
770873-1 1-770873-0
770873-2 1-770873-1
770874-2 1-770874-1
770875-1 1-770875-0
770875-2 1-770875-1
Non-Compliant RoHS Compliant
Part Number Part Number
770876-1 1-770876-0
770876-2 1-770876-1
770901-3 1-770901-0
770902-3 1-770902-0
770902-6 1-770902-1
770903-3 1-770903-0
770903-6 1-770903-1
770904-3 1-770904-0
770904-6 1-770904-1
770966-1 1-770966-0
770966-2 1-770966-1
770967-1 1-770967-0
770967-2 1-770967-1
770968-1 1-770968-0
770968-2 1-770968-1
770969-1 1-770969-0
770969-2 1-770969-1
770970-1 1-770970-0
770970-2 1-770970-1
770971-1 1-770971-0
770971-2 1-770971-1
770972-1 1-770972-0
770972-2 1-770972-1
770973-1 1-770973-0
770973-2 1-770973-1
770974-1 1-770974-0
770974-2 1-770974-1
770985-3 1-770985-0
770986-3 1-770986-0
770987-3 1-770987-0
770988-3 1-770988-0
794040-1 1-794040-0
794040-2 1-794040-1
794058-3 1-794058-0
794059-3 1-794059-0
794065-1 1-794065-0
794065-2 1-794065-1
794066-1 1-794066-0
794066-2 1-794066-1
794067-1 1-794067-0
794067-2 1-794067-1
794068-1 1-794068-0
794068-2 1-794068-1
794069-1 1-794069-0
794069-2 1-794069-1
794070-1 1-794070-0
794070-2 1-794070-1
794071-1 1-794071-0
794071-2 1-794071-1
794072-1 1-794072-0
794072-2 1-794072-1
794073-1 1-794073-0
794073-2 1-794073-1
794074-1 1-794074-0
794074-2 1-794074-1
794075-2 1-794075-1
794076-1 1-794076-0
794076-2 1-794076-1
794077-1 1-794077-0
794077-2 1-794077-1
794078-1 1-794078-0
Non-Compliant RoHS Compliant
Part Number Part Number
AMP
Soft Shell
Pin and Socket Connectors
Non-Compliant to RoHS Compliant Part Number Cross Reference
217
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Non-Compliant to RoHS Compliant Part Number Cross Reference (Continued)
794078-2 1-794078-1
794079-1 1-794079-0
794079-2 1-794079-1
794105-1 1-794105-0
794105-2 1-794105-1
794106-1 1-794106-0
794106-2 1-794106-1
794107-1 1-794107-0
794107-2 1-794107-1
794108-1 1-794108-0
794108-2 1-794108-1
794126-1 1-794126-0
794130-2 1-794130-1
794136-3 1-794136-1
794137-3 1-794137-1
794138-3 1-794138-3
794139-3 1-794139-3
794140-3 1-794140-3
794141-3 1-794141-3
794142-3 1-794142-3
794143-3 1-794143-3
794181-1 1-794181-1
794181-2 1-794181-2
794216-3 1-794216-0
794217-3 1-794217-0
794218-3 1-794218-0
794219-3 1-794219-0
794220-3 1-794220-0
794221-3 1-794221-0
794222-3 1-794222-0
794223-3 1-794223-0
794224-3 1-794224-0
794225-3 1-794225-0
794226-3 1-794226-0
794227-3 1-794227-0
794228-3 1-794228-0
794229-3 1-794229-0
794230-3 1-794230-0
794231-3 1-794231-0
794302-1 1-794302-1
794302-2 1-794302-2
794303-1 1-794303-1
794303-2 1-794303-2
794304-1 1-794304-1
794304-2 1-794304-2
794305-1 1-794305-1
794305-2 1-794305-2
794306-1 1-794306-1
794306-2 1-794306-2
794307-1 1-794307-1
794307-2 1-794307-2
794308-1 1-794308-1
794308-2 1-794308-2
794309-1 1-794309-1
794309-2 1-794309-2
794310-1 1-794310-1
794310-2 1-794310-2
794311-1 1-794311-1
794311-2 1-794311-2
794312-1 1-794312-1
794312-2 1-794312-2
Non-Compliant RoHS Compliant
Part Number Part Number
794313-1 794313-3
794313-2 794313-4
794325-1 1-794325-0
794326-2 1-794326-1
794327-1 1-794327-0
794327-2 1-794327-1
794328-1 1-794328-0
794330-2 1-794330-1
794349-1 1-794349-1
794349-2 1-794349-2
794350-1 1-794350-1
794350-2 1-794350-2
794351-1 1-794351-1
794351-2 1-794351-2
794352-1 1-794352-1
794352-2 1-794352-2
794353-1 1-794353-1
794353-2 1-794353-2
794354-1 1-794354-1
794354-2 1-794354-2
794355-1 1-794355-1
794355-2 1-794355-2
794356-1 1-794356-1
794356-2 1-794356-2
794357-1 1-794357-1
794357-2 1-794357-2
794358-1 1-794358-1
794358-2 1-794358-2
794359-1 1-794359-1
794359-2 1-794359-2
794360-1 1-794360-1
794360-2 1-794360-2
794374-1 1-794374-0
794374-2 1-794374-1
794406-3 1-794406-0
794407-3 1-794407-0
794415-1 1-794415-1
794415-2 1-794415-2
794429-1 1-794429-1
794429-2 1-794429-2
794448-1 1-794448-1
794449-1 1-794449-1
794453-1 1-794453-1
794453-2 1-794453-2
794454-1 1-794454-1
794454-2 1-794454-2
794455-1 1-794455-1
794455-2 1-794455-2
794466-1 1-794466-1
794466-2 1-794466-2
794467-1 1-794467-1
794467-2 1-794467-2
794468-1 1-794468-1
794468-2 1-794468-2
794469-1 1-794469-1
794469-2 1-794469-2
794470-1 1-794470-1
794470-2 1-794470-2
794471-1 1-794471-1
794471-2 1-794471-2
794472-1 1-794472-1
Non-Compliant RoHS Compliant
Part Number Part Number
794472-2 1-794472-2
794484-1 1-794484-1
794484-2 1-794484-2
794485-1 1-794485-1
794485-2 1-794485-2
794486-1 1-794486-1
794486-2 1-794486-2
794487-1 1-794487-1
794487-2 1-794487-2
794488-1 1-794488-1
794488-2 1-794488-2
794489-1 1-794489-1
794489-2 1-794489-2
794490-1 1-794490-1
794490-2 1-794490-2
794491-1 1-794491-1
794491-2 1-794491-2
794492-1 1-794492-1
794492-2 1-794492-2
794493-1 1-794493-1
794493-2 1-794493-2
794494-1 1-794494-1
794494-2 1-794494-2
794507-1 1-794507-1
794508-1 1-794508-1
794509-1 1-794509-1
794510-1 1-794510-1
794511-1 1-794511-1
794512-1 1-794512-1
794513-1 1-794513-1
794514-1 1-794514-1
794515-1 1-794515-1
794516-1 1-794516-1
794526-1 1-794526-1
794527-1 1-794527-1
794528-1 1-794528-1
794529-1 1-794529-1
794530-1 1-794530-1
794531-1 1-794531-1
794532-1 1-794532-1
794533-1 1-794533-1
794534-1 1-794534-1
794540-1 1-794540-1
794540-2 1-794540-2
794543-1 1-794543-1
794543-2 1-794543-2
794576-2 794576-4
794578-2 794578-4
794588-1 1-794588-1
794589-1 1-794589-1
794590-1 1-794590-1
794606-2 1-794606-1
794606-3 1-794606-2
794607-2 1-794607-1
794607-3 1-794607-2
794608-1 1-794608-0
794608-2 1-794608-1
794608-3 1-794608-2
794609-1 1-794609-0
794609-2 1-794609-1
794609-3 1-794609-2
Non-Compliant RoHS Compliant
Part Number Part Number
794610-2 1-794610-1
794610-3 1-794610-2
794611-2 1-794611-1
794611-3 1-794611-2
794612-1 1-794612-0
794612-2 1-794612-1
794612-3 1-794612-2
794613-1 1-794613-0
794613-2 1-794613-1
794613-3 1-794613-2
794618-2 3-794618-2
794618-4 3-794618-4
794618-6 3-794618-6
794618-8 3-794618-8
1-794618-0 4-794618-0
1-794618-2 4-794618-2
1-794618-4 4-794618-4
1-794618-6 4-794618-6
1-794618-8 4-794618-8
2-794618-0 5-794618-0
2-794618-2 5-794618-2
2-794618-4 5-794618-4
794619-2 3-794619-2
794619-4 3-794619-4
794619-6 3-794619-6
794619-8 3-794619-8
1-794619-0 4-794619-0
1-794619-2 4-794619-2
1-794619-4 4-794619-4
1-794619-6 4-794619-6
1-794619-8 4-794619-8
2-794619-0 5-794619-0
2-794619-2 5-794619-2
2-794619-4 5-794619-4
794620-2 3-794620-2
794620-4 3-794620-4
794620-6 3-794620-6
794620-8 3-794620-8
1-794620-0 4-794620-0
1-794620-2 4-794620-2
1-794620-4 4-794620-4
1-794620-6 4-794620-6
1-794620-8 4-794620-8
2-794620-0 5-794620-0
2-794620-2 5-794620-2
2-794620-4 5-794620-4
794621-2 3-794621-2
794621-4 3-794621-4
794621-6 3-794621-6
794621-8 3-794621-8
1-794621-0 4-794621-0
1-794621-2 4-794621-2
1-794621-4 4-794621-4
1-794621-6 4-794621-6
1-794621-8 4-794621-8
2-794621-0 5-794621-0
2-794621-2 5-794621-2
2-794621-4 5-794621-4
794622-2 3-794622-2
794622-4 3-794622-4
794622-6 3-794622-6
Non-Compliant RoHS Compliant
Part Number Part Number
AMP
Soft Shell
Pin and Socket Connectors
Non-Compliant to RoHS Compliant Part Number Cross Reference
218
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Non-Compliant to RoHS Compliant Part Number Cross Reference (Continued)
1-794627-0 4-794627-0
1-794627-2 4-794627-2
1-794627-4 4-794627-4
1-794627-6 4-794627-6
1-794627-8 4-794627-8
2-794627-0 5-794627-0
2-794627-2 5-794627-2
2-794627-4 5-794627-4
794628-2 3-794628-2
794628-4 3-794628-4
794628-6 3-794628-6
794628-8 3-794628-8
1-794628-0 4-794628-0
1-794628-2 4-794628-2
1-794628-4 4-794628-4
1-794628-6 4-794628-6
1-794628-8 4-794628-8
2-794628-0 5-794628-0
2-794628-2 5-794628-2
2-794628-4 5-794628-4
794629-2 3-794629-2
794629-4 3-794629-4
794629-6 3-794629-6
794629-8 3-794629-8
1-794629-0 4-794629-0
1-794629-2 4-794629-2
1-794629-4 4-794629-4
1-794629-6 4-794629-6
1-794629-8 4-794629-8
2-794629-0 5-794629-0
2-794629-2 5-794629-2
2-794629-4 5-794629-4
794630-2 3-794630-2
794630-4 3-794630-4
794630-6 3-794630-6
794630-8 3-794630-8
1-794630-0 4-794630-0
1-794630-2 4-794630-2
1-794630-4 4-794630-4
1-794630-6 4-794630-6
1-794630-8 4-794630-8
2-794630-0 5-794630-0
2-794630-2 5-794630-2
2-794630-4 5-794630-4
794631-2 3-794631-2
794631-4 3-794631-4
794631-6 3-794631-6
794631-8 3-794631-8
1-794631-0 4-794631-0
1-794631-2 4-794631-2
1-794631-4 4-794631-4
1-794631-6 4-794631-6
1-794631-8 4-794631-8
2-794631-0 5-794631-0
2-794631-2 5-794631-2
2-794631-4 5-794631-4
794632-2 3-794632-2
794632-4 3-794632-4
794632-6 3-794632-6
794632-8 3-794632-8
1-794632-0 4-794632-0
Non-Compliant RoHS Compliant
Part Number Part Number
794622-8 3-794622-8
1-794622-0 4-794622-0
1-794622-2 4-794622-2
1-794622-4 4-794622-4
1-794622-6 4-794622-6
1-794622-8 4-794622-8
2-794622-0 5-794622-0
2-794622-2 5-794622-2
2-794622-4 5-794622-4
794623-2 3-794623-2
794623-4 3-794623-4
794623-6 3-794623-6
794623-8 3-794623-8
1-794623-0 4-794623-0
1-794623-2 4-794623-2
1-794623-4 4-794623-4
1-794623-6 4-794623-6
1-794623-8 4-794623-8
2-794623-0 5-794623-0
2-794623-2 5-794623-2
2-794623-4 5-794623-4
794624-2 3-794624-2
794624-4 3-794624-4
794624-6 3-794624-6
794624-8 3-794624-8
1-794624-0 4-794624-0
1-794624-2 4-794624-2
1-794624-4 4-794624-4
1-794624-6 4-794624-6
1-794624-8 4-794624-8
2-794624-0 5-794624-0
2-794624-2 5-794624-2
2-794624-4 5-794624-4
794625-2 3-794625-2
794625-4 3-794625-4
794625-6 3-794625-6
794625-8 3-794625-8
1-794625-0 4-794625-0
1-794625-2 4-794625-2
1-794625-4 4-794625-4
1-794625-6 4-794625-6
1-794625-8 4-794625-8
2-794625-0 5-794625-0
2-794625-2 5-794625-2
2-794625-4 5-794625-4
794626-2 3-794626-2
794626-4 3-794626-4
794626-6 3-794626-6
794626-8 3-794626-8
1-794626-0 4-794626-0
1-794626-2 4-794626-2
1-794626-4 4-794626-4
1-794626-6 4-794626-6
1-794626-8 4-794626-8
2-794626-0 5-794626-0
2-794626-2 5-794626-2
2-794626-4 5-794626-4
794627-2 3-794627-2
794627-4 3-794627-4
794627-6 3-794627-6
794627-8 3-794627-8
Non-Compliant RoHS Compliant
Part Number Part Number
1-794632-2 4-794632-2
1-794632-4 4-794632-4
1-794632-6 4-794632-6
1-794632-8 4-794632-8
2-794632-0 5-794632-0
2-794632-2 5-794632-2
2-794632-4 5-794632-4
794633-2 3-794633-2
794633-4 3-794633-4
794633-6 3-794633-6
794633-8 3-794633-8
1-794633-0 4-794633-0
1-794633-2 4-794633-2
1-794633-4 4-794633-4
1-794633-6 4-794633-6
1-794633-8 4-794633-8
2-794633-0 5-794633-0
2-794633-2 5-794633-2
2-794633-4 5-794633-4
794634-2 3-794634-2
794634-4 3-794634-4
794634-6 3-794634-6
794634-8 3-794634-8
1-794634-0 4-794634-0
1-794634-2 4-794634-2
1-794634-4 4-794634-4
1-794634-6 4-794634-6
1-794634-8 4-794634-8
2-794634-0 5-794634-0
2-794634-2 5-794634-2
2-794634-4 5-794634-4
794635-2 3-794635-2
794635-4 3-794635-4
794635-6 3-794635-6
794635-8 3-794635-8
1-794635-0 4-794635-0
1-794635-2 4-794635-2
1-794635-4 4-794635-4
1-794635-6 4-794635-6
1-794635-8 4-794635-8
2-794635-0 5-794635-0
2-794635-2 5-794635-2
2-794635-4 5-794635-4
794636-2 3-794636-2
794636-4 3-794636-4
794636-6 3-794636-6
794636-8 3-794636-8
1-794636-0 4-794636-0
1-794636-2 4-794636-2
1-794636-4 4-794636-4
1-794636-6 4-794636-6
1-794636-8 4-794636-8
2-794636-0 5-794636-0
2-794636-2 5-794636-2
2-794636-4 5-794636-4
794637-2 3-794637-2
794637-4 3-794637-4
794637-6 3-794637-6
794637-8 3-794637-8
1-794637-0 4-794637-0
1-794637-2 4-794637-2
Non-Compliant RoHS Compliant
Part Number Part Number
1-794637-4 4-794637-4
1-794637-6 4-794637-6
1-794637-8 4-794637-8
2-794637-0 5-794637-0
2-794637-2 5-794637-2
2-794637-4 5-794637-4
794638-2 3-794638-2
794638-4 3-794638-4
794638-6 3-794638-6
794638-8 3-794638-8
1-794638-0 4-794638-0
1-794638-2 4-794638-2
1-794638-4 4-794638-4
1-794638-6 4-794638-6
1-794638-8 4-794638-8
2-794638-0 5-794638-0
2-794638-2 5-794638-2
2-794638-4 5-794638-4
794662-2 1586489-2
794662-4 1586489-4
794662-6 1586489-6
794662-8 1586489-8
1-794662-0 1-1586489-0
1-794662-2 1-1586489-2
1-794662-4 1-1586489-4
1-794662-6 1-1586489-6
1-794662-8 1-1586489-8
2-794662-0 2-1586489-0
2-794662-2 2-1586489-2
2-794662-4 2-1586489-4
794663-2 1586490-2
794663-4 1586490-4
794663-6 1586490-6
794663-8 1586490-8
1-794663-0 1-1586490-0
1-794663-2 1-1586490-2
1-794663-4 1-1586490-4
1-794663-6 1-1586490-6
1-794663-8 1-1586490-8
2-794663-0 2-1586490-0
2-794663-2 2-1586490-2
2-794663-4 2-1586490-4
794664-2 1586491-2
794664-4 1586491-4
794664-6 1586491-6
794664-8 1586491-8
1-794664-0 1-1586491-0
1-794664-2 1-1586491-2
1-794664-4 1-1586491-4
1-794664-6 1-1586491-6
1-794664-8 1-1586491-8
2-794664-0 2-1586491-0
2-794664-2 2-1586491-2
2-794664-4 2-1586491-4
794665-2 1586492-2
794665-4 1586492-4
794665-6 1586492-6
794665-8 1586492-8
1-794665-0 1-1586492-0
1-794665-2 1-1586492-2
1-794665-4 1-1586492-4
Non-Compliant RoHS Compliant
Part Number Part Number
AMP
Soft Shell
Pin and Socket Connectors
Non-Compliant to RoHS Compliant Part Number Cross Reference
219
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Non-Compliant to RoHS Compliant Part Number Cross Reference (Continued)
1-794665-8 1-1586492-8
2-794665-0 2-1586492-0
2-794665-2 2-1586492-2
2-794665-4 2-1586492-4
794666-2 1586493-2
794666-4 1586493-4
794666-6 1586493-6
794666-8 1586493-8
1-794666-0 1-1586493-0
1-794666-2 1-1586493-2
1-794666-4 1-1586493-4
1-794666-6 1-1586493-6
1-794666-8 1-1586493-8
2-794666-0 2-1586493-0
2-794666-2 2-1586493-2
2-794666-4 2-1586493-4
794667-2 1586494-2
794667-4 1586494-4
794667-6 1586494-6
794667-8 1586494-8
1-794667-0 1-1586494-0
1-794667-2 1-1586494-2
1-794667-4 1-1586494-4
1-794667-6 1-1586494-6
1-794667-8 1-1586494-8
2-794667-0 2-1586494-0
2-794667-2 2-1586494-2
2-794667-4 2-1586494-4
794668-2 1586495-2
794668-4 1586495-4
794668-6 1586495-6
794668-8 1586495-8
1-794668-0 1-1586495-0
1-794668-2 1-1586495-2
1-794668-4 1-1586495-4
1-794668-6 1-1586495-6
1-794668-8 1-1586495-8
2-794668-0 2-1586495-0
2-794668-2 2-1586495-2
2-794668-4 2-1586495-4
794669-2 1586496-2
794669-4 1586496-4
794669-6 1586496-6
794669-8 1586496-8
1-794669-0 1-1586496-0
1-794669-2 1-1586496-2
1-794669-4 1-1586496-4
1-794669-6 1-1586496-6
1-794669-8 1-1586496-8
2-794669-0 2-1586496-0
2-794669-2 2-1586496-2
2-794669-4 2-1586496-4
794677-2 3-794677-2
794677-4 3-794677-4
794677-6 3-794677-6
794677-8 3-794677-8
1-794677-0 4-794677-0
1-794677-2 4-794677-2
1-794677-4 4-794677-4
1-794677-6 4-794677-6
1-794677-8 4-794677-8
Non-Compliant RoHS Compliant
Part Number Part Number
2-794677-0 5-794677-0
2-794677-2 5-794677-2
2-794677-4 5-794677-4
794678-2 3-794678-2
794678-4 3-794678-4
794678-6 3-794678-6
794678-8 3-794678-8
1-794678-0 4-794678-0
1-794678-2 4-794678-2
1-794678-4 4-794678-4
1-794678-6 4-794678-6
1-794678-8 4-794678-8
2-794678-0 5-794678-0
2-794678-2 5-794678-2
2-794678-4 5-794678-4
794679-2 3-794679-2
794679-4 3-794679-4
794679-6 3-794679-6
794679-8 3-794679-8
1-794679-0 4-794679-0
1-794679-2 4-794679-2
1-794679-4 4-794679-4
1-794679-6 4-794679-6
1-794679-8 4-794679-8
2-794679-0 5-794679-0
2-794679-2 5-794679-2
2-794679-4 5-794679-4
794680-2 3-794680-2
794680-4 3-794680-4
794680-6 3-794680-6
794680-8 3-794680-8
1-794680-0 4-794680-0
1-794680-2 4-794680-2
1-794680-4 4-794680-4
1-794680-6 4-794680-6
1-794680-8 4-794680-8
2-794680-0 5-794680-0
2-794680-2 5-794680-2
2-794680-4 5-794680-4
794681-2 3-794681-2
794681-4 3-794681-4
794681-6 3-794681-6
794681-8 3-794681-8
1-794681-0 4-794681-0
1-794681-2 4-794681-2
1-794681-4 4-794681-4
1-794681-6 4-794681-6
1-794681-8 4-794681-8
2-794681-0 5-794681-0
2-794681-2 5-794681-2
2-794681-4 5-794681-4
794682-2 3-794682-2
794682-4 3-794682-4
794682-6 3-794682-6
794682-8 3-794682-8
1-794682-0 4-794682-0
1-794682-2 4-794682-2
1-794682-4 4-794682-4
1-794682-6 4-794682-6
1-794682-8 4-794682-8
2-794682-0 5-794682-0
Non-Compliant RoHS Compliant
Part Number Part Number
2-794682-2 5-794682-2
2-794682-4 5-794682-4
794704-1 1586542-1
1445050-2 2-1445050-2
1445050-3 2-1445050-3
1445050-4 2-1445050-4
1445050-5 2-1445050-5
1445050-6 2-1445050-6
1445050-7 2-1445050-7
1445050-8 2-1445050-8
1445050-9 2-1445050-9
1-1445050-0 3-1445050-0
1-1445050-1 3-1445050-1
1-1445050-2 3-1445050-2
1445051-2 2-1445051-2
1445051-3 2-1445051-3
1445051-4 2-1445051-4
1445051-5 2-1445051-5
1445051-6 2-1445051-6
1445051-7 2-1445051-7
1445051-8 2-1445051-8
1445051-9 2-1445051-9
1-1445051-0 3-1445051-0
1-1445051-1 3-1445051-1
1-1445051-2 3-1445051-2
1445052-2 2-1445052-2
1445052-3 2-1445052-3
1445052-4 2-1445052-4
1445052-5 2-1445052-5
1445052-6 2-1445052-6
1445052-7 2-1445052-7
1445052-8 2-1445052-8
1445052-9 2-1445052-9
1-1445052-0 3-1445052-0
1-1445052-1 3-1445052-1
1-1445052-2 3-1445052-2
1445053-2 2-1445053-2
1445053-3 2-1445053-3
1445053-4 2-1445053-4
1445053-5 2-1445053-5
1445053-6 2-1445053-6
1445053-7 2-1445053-7
1445053-8 2-1445053-8
1445053-9 2-1445053-9
1-1445053-0 3-1445053-0
1-1445053-1 3-1445053-1
1-1445053-2 3-1445053-2
1445054-2 2-1445054-2
1445054-3 2-1445054-3
1445054-4 2-1445054-4
1445054-5 2-1445054-5
1445054-6 2-1445054-6
1445054-7 2-1445054-7
1445054-8 2-1445054-8
1445054-9 2-1445054-9
1-1445054-0 3-1445054-0
1-1445054-1 3-1445054-1
1-1445054-2 3-1445054-2
1445055-2 2-1445055-2
1445055-3 2-1445055-3
1445055-4 2-1445055-4
Non-Compliant RoHS Compliant
Part Number Part Number
1445055-5 2-1445055-5
1445055-6 2-1445055-6
1445055-7 2-1445055-7
1445055-8 2-1445055-8
1445055-9 2-1445055-9
1-1445055-0 3-1445055-0
1-1445055-1 3-1445055-1
1-1445055-2 3-1445055-2
1445056-2 2-1445056-2
1445056-3 2-1445056-3
1445056-4 2-1445056-4
1445056-5 2-1445056-5
1445056-6 2-1445056-6
1445056-7 2-1445056-7
1445056-8 2-1445056-8
1445056-9 2-1445056-9
1-1445056-0 3-1445056-0
1-1445056-1 3-1445056-1
1-1445056-2 3-1445056-2
1445057-2 2-1445057-2
1445057-3 2-1445057-3
1445057-4 2-1445057-4
1445057-5 2-1445057-5
1445057-6 2-1445057-6
1445057-7 2-1445057-7
1445057-8 2-1445057-8
1445057-9 2-1445057-9
1-1445057-0 3-1445057-0
1-1445057-1 3-1445057-1
1-1445057-2 3-1445057-2
1445058-2 2-1445058-2
1445058-3 2-1445058-3
1445058-4 2-1445058-4
1445058-5 2-1445058-5
1445058-6 2-1445058-6
1445058-7 2-1445058-7
1445058-8 2-1445058-8
1445058-9 2-1445058-9
1-1445058-0 3-1445058-0
1-1445058-1 3-1445058-1
1-1445058-2 3-1445058-2
1445084-2 2-1445084-2
1445084-3 2-1445084-3
1445084-4 2-1445084-4
1445084-5 2-1445084-5
1445084-6 2-1445084-6
1445084-7 2-1445084-7
1445084-8 2-1445084-8
1445084-9 2-1445084-9
1-1445084-0 3-1445084-0
1-1445084-1 3-1445084-1
1-1445084-2 3-1445084-2
1445085-2 2-1445085-2
1445085-3 2-1445085-3
1445085-4 2-1445085-4
1445085-5 2-1445085-5
1445085-6 2-1445085-6
1445085-7 2-1445085-7
1445085-8 2-1445085-8
1445085-9 2-1445085-9
1-1445085-0 3-1445085-0
Non-Compliant RoHS Compliant
Part Number Part Number
AMP
Soft Shell
Pin and Socket Connectors
Non-Compliant to RoHS Compliant Part Number Cross Reference
220
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Non-Compliant to RoHS Compliant Part Number Cross Reference (Continued)
1-1445089-2 3-1445089-2
1445090-2 2-1445090-2
1445090-3 2-1445090-3
1445090-4 2-1445090-4
1445090-5 2-1445090-5
1445090-6 2-1445090-6
1445090-7 2-1445090-7
1445090-8 2-1445090-8
1445090-9 2-1445090-9
1-1445090-0 3-1445090-0
1-1445090-1 3-1445090-1
1-1445090-2 3-1445090-2
1445091-2 2-1445091-2
1445091-3 2-1445091-3
1445091-4 2-1445091-4
1445091-5 2-1445091-5
1445091-6 2-1445091-6
1445091-7 2-1445091-7
1445091-8 2-1445091-8
1445091-9 2-1445091-9
1-1445091-0 3-1445091-0
1-1445091-1 3-1445091-1
1-1445091-2 3-1445091-2
1445092-2 2-1445092-2
1445092-3 2-1445092-3
1445092-4 2-1445092-4
1445092-5 2-1445092-5
1445092-6 2-1445092-6
1445092-7 2-1445092-7
1445092-8 2-1445092-8
1445092-9 2-1445092-9
1-1445092-0 3-1445092-0
1-1445092-1 3-1445092-1
1-1445092-2 3-1445092-2
1445093-2 2-1445093-2
1445093-3 2-1445093-3
1445093-4 2-1445093-4
1445093-5 2-1445093-5
1445093-6 2-1445093-6
1445093-7 2-1445093-7
1445093-8 2-1445093-8
1445093-9 2-1445093-9
1-1445093-0 3-1445093-0
1-1445093-1 3-1445093-1
1-1445093-2 3-1445093-2
Non-Compliant RoHS Compliant
Part Number Part Number
1-1445085-1 3-1445085-1
1-1445085-2 3-1445085-2
1445086-2 2-1445086-2
1445086-3 2-1445086-3
1445086-4 2-1445086-4
1445086-5 2-1445086-5
1445086-6 2-1445086-6
1445086-7 2-1445086-7
1445086-8 2-1445086-8
1445086-9 2-1445086-9
1-1445086-0 3-1445086-0
1-1445086-1 3-1445086-1
1-1445086-2 3-1445086-2
1445087-2 2-1445087-2
1445087-3 2-1445087-3
1445087-4 2-1445087-4
1445087-5 2-1445087-5
1445087-6 2-1445087-6
1445087-7 2-1445087-7
1445087-8 2-1445087-8
1445087-9 2-1445087-9
1-1445087-0 3-1445087-0
1-1445087-1 3-1445087-1
1-1445087-2 3-1445087-2
1445088-2 2-1445088-2
1445088-3 2-1445088-3
1445088-4 2-1445088-4
1445088-5 2-1445088-5
1445088-6 2-1445088-6
1445088-7 2-1445088-7
1445088-8 2-1445088-8
1445088-9 2-1445088-9
1-1445088-0 3-1445088-0
1-1445088-1 3-1445088-1
1-1445088-2 3-1445088-2
1445089-2 2-1445089-2
1445089-3 2-1445089-3
1445089-4 2-1445089-4
1445089-5 2-1445089-5
1445089-6 2-1445089-6
1445089-7 2-1445089-7
1445089-8 2-1445089-8
1445089-9 2-1445089-9
1-1445089-0 3-1445089-0
1-1445089-1 3-1445089-1
Non-Compliant RoHS Compliant
Part Number Part Number
1445094-2 2-1445094-2
1445094-3 2-1445094-3
1445094-4 2-1445094-4
1445094-5 2-1445094-5
1445094-6 2-1445094-6
1445094-7 2-1445094-7
1445094-8 2-1445094-8
1445094-9 2-1445094-9
1-1445094-0 3-1445094-0
1-1445094-1 3-1445094-1
1-1445094-2 3-1445094-2
1445095-2 2-1445095-2
1445095-3 2-1445095-3
1445095-4 2-1445095-4
1445095-5 2-1445095-5
1445095-6 2-1445095-6
1445095-7 2-1445095-7
1445095-8 2-1445095-8
1445095-9 2-1445095-9
1-1445095-0 3-1445095-0
1-1445095-1 3-1445095-1
1-1445095-2 3-1445095-2
1445096-2 2-1445096-2
1445096-3 2-1445096-3
1445096-4 2-1445096-4
1445096-5 2-1445096-5
1445096-6 2-1445096-6
1445096-7 2-1445096-7
1445096-8 2-1445096-8
1445096-9 2-1445096-9
1-1445096-0 3-1445096-0
1-1445096-1 3-1445096-1
1-1445096-2 3-1445096-2
1445097-2 2-1445097-2
1445097-3 2-1445097-3
1445097-4 2-1445097-4
1445097-5 2-1445097-5
1445097-6 2-1445097-6
1445097-7 2-1445097-7
1445097-8 2-1445097-8
1445097-9 2-1445097-9
1-1445097-0 3-1445097-0
1-1445097-1 3-1445097-1
1-1445097-2 3-1445097-2
1445098-2 2-1445098-2
Non-Compliant RoHS Compliant
Part Number Part Number
1445098-3 2-1445098-3
1445098-4 2-1445098-4
1445098-5 2-1445098-5
1445098-6 2-1445098-6
1445098-7 2-1445098-7
1445098-8 2-1445098-8
1445098-9 2-1445098-9
1-1445098-0 3-1445098-0
1-1445098-1 3-1445098-1
1-1445098-2 3-1445098-2
1445099-2 2-1445099-2
1445099-3 2-1445099-3
1445099-4 2-1445099-4
1445099-5 2-1445099-5
1445099-6 2-1445099-6
1445099-7 2-1445099-7
1445099-8 2-1445099-8
1445099-9 2-1445099-9
1-1445099-0 3-1445099-0
1-1445099-1 3-1445099-1
1-1445099-2 3-1445099-2
1445100-2 2-1445100-2
1445100-3 2-1445100-3
1445100-4 2-1445100-4
1445100-5 2-1445100-5
1445100-6 2-1445100-6
1445100-7 2-1445100-7
1445100-8 2-1445100-8
1445100-9 2-1445100-9
1-1445100-0 3-1445100-0
1-1445100-1 3-1445100-1
1-1445100-2 3-1445100-2
1445101-2 2-1445101-2
1445101-3 2-1445101-3
1445101-4 2-1445101-4
1445101-5 2-1445101-5
1445101-6 2-1445101-6
1445101-7 2-1445101-7
1445101-8 2-1445101-8
1445101-9 2-1445101-9
1-1445101-0 3-1445101-0
1-1445101-1 3-1445101-1
1-1445101-2 3-1445101-2
Non-Compliant RoHS Compliant
Part Number Part Number
AMP
Soft Shell
Pin and Socket Connectors
Non-Compliant to RoHS Compliant Part Number Cross Reference
60617 155
60618 155
60619 155
60620 155
60842 155
60843 155
61085 203, 213
61086 203, 213
61116 155, 214
61117 155, 214
61118 155, 214
61173 155
61174 155
61233 203, 213
61234 203, 213
61250 213
61251 213
61252 213
61253 213
61314 155, 212
61320 156
61518 156
61527 156, 212
61626 166, 212
61627 166, 212
106527 126
106528 126, 212
106529 126, 212
171636 213
171637 213
171638 86
171639 86
172156 85, 87
172157 85, 87
172158 85, 87
172159 85, 87
172160 85, 87
172161 85, 88
172162 85, 88
172163 85, 88
172164 85, 87, 92
172165 85, 87, 90, 92, 103, 105
172166 85, 87, 90, 92, 103, 105
172167 85, 87, 90-92, 103-105
172168 85, 87, 90-92, 103-105
172169 85, 88, 90-92, 103-105
172170 85, 88, 90-92, 103-105
172171 85, 88, 90-92, 103-105
172233 85, 87
172234 85, 87
172327 85, 87
172328 85, 87
172329 85, 87
172330 85, 87
172331 85, 87
172332 85, 88
172333 85, 88
Part No. Page
172334 85, 88
172335 85, 87
172336 85, 87
172337 85, 87
172338 85, 87
172339 85, 87
172340 85, 88
172341 85, 88
172342 85, 88
172343 85, 87
172344 85, 87
172807 85, 89
172808 85, 89
172809 85, 89
172971 86
173924 184, 199
173925 184, 199
173926 184, 199
173956 85
173957 85, 89
173958 85
174552 154, 164
174670 86
177898 60, 62, 71
177899 60, 62, 71
177900 60, 63, 71
177901 60, 63, 71
177902 60, 63, 71
177903 60, 64, 71
177904 60, 64, 71
177905 60, 64, 71
177906 60, 67, 71
177907 60, 67, 71
177908 60, 68, 71
177909 60, 68, 71
177911 60, 69, 71
177912 60, 69, 71
177913 60, 70-71
177914 61, 211
177915 61, 211
177916 61, 211
177917 61, 211
177918 60, 71
177919 60, 71
177920 60, 71
177921 60, 71
179463 60, 65, 71
179464 60, 65, 71
179465 60, 66, 71
179466 60, 66, 71
179467 60, 66, 71
179592 61
179593 61
179594 61
179595 61
179838 61, 72
179839 61, 72
179840 61, 73
179841 61, 73
179843 61, 74
179844 61, 74
179846 61, 79
Part No. Page
179847 61, 79
179848 61, 80
179849 61, 80
179861 61, 75, 77
179862 61, 76-77
179938 61, 75, 77
179939 61, 75, 77
179944 61
179945 61
193796 201
193797 201
193839 201
193841 201
193842 201
194002 202
194009 202
194010 202
194012 202
194013 202
194014 202
194017 202
194018 202
200821 156
306088 14
316061 60, 78
316062 60, 78
316063 60, 78
316086 10, 12, 14
316087 10, 12, 14
316088 10, 12, 14
316089 10, 12, 14
316090 10, 12, 14
316091 10, 12, 14
316092 10, 12, 14
316094 10, 12, 14
316221 16
316222 16
316223 16
316224 16
316225 16
316226 16
316227 16
316299 72
316398 12
316399 12
316400 12
316401 12
316454 94
316455 94
316501 60, 62, 71
316502 60, 67, 71
316768 60, 62, 71
316769 60, 65, 71
316770 60, 71
350020 116
350021 116
350022 116
350073 156
350074 156
350078 155, 212
350079 155, 212
350200 166, 212
Part No. Page
350201 166, 212
350209 153, 161
350210 153, 161
350211 154, 161, 163
350212 153, 161
350213 153, 161
350214 153, 161
350218 172, 181, 213
350219 153, 161
350220 153, 161
350344 167
350345 167
350346 167
350347 167
350373 116
350374 116
350375 116
350376 116
350377 116
350378 116
350379 116
350380 116
350388 166
350389 166
350390 166
350391 166
350415 145, 212
350416 145, 212
350417 145, 212
350418 145, 212
350422 153, 161
350423 153, 161
350424 154, 161, 163
350425 153, 161
350426 153, 161
350427 153, 161
350428 171, 182
350429 171, 182
350430 171, 182
350431 171, 182
350432 171, 182
350433 171, 182
350434 171, 182
350444 155
350522 116
350523 116
350524 116
350536 172, 181, 213
350537 172, 213
350538 172, 213
350539 153, 158, 161
350540 153, 158, 161
350541 153, 158, 161
350542 153, 161
350543 154, 158, 161
350544 154, 158, 161
350547 172, 181
350550 172, 181
350551 172
350552 172
350557 155, 212
350558 155, 212
Part No. Page
221
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Note: This index lists all cataloged parts
by base no. only. Complete part nos.
(with prefixes and/or suffixes) are shown
on the page(s) indicated.
Part Number Index
AMP
Soft Shell
Pin and Socket Connectors
Part Number Index
350779 171, 174, 182-185,
197-200
350780 171, 174
350781 171, 174
350782 171, 174
350783 171, 174
350784 171, 174
350786 171, 182, 191, 197
350787 171, 182, 191, 197
350789 171, 182, 191, 197
350790 171, 182, 191, 197
350792 171, 182, 191, 197
350793 171, 182, 191, 197
350809 171, 174, 182-183,
185, 197-198
350810 171, 174, 193
350811 173
350812 173
350824 171, 183, 191, 198
350825 171, 183, 191, 198
350826 171, 183, 191, 198
350827 171, 183, 191, 198
350828 171, 183, 191, 198
350829 171, 183, 191, 198
350830 171, 183, 191, 198
350831 171, 183, 191, 198
350832 171, 183, 191, 198
350833 171, 183, 191, 198
350834 171, 183, 191, 198
350835 171, 183, 191, 198
350836 171, 183, 191, 198
350837 171, 183, 191, 198
350838 112
350848 185
350849 185
350851 172, 212
350865 171, 174
350866 171, 174
350867 171, 174
350871 173
350873 172, 213
350874 172, 213
350877 173
350918 172
350919 172
350922 172, 213
350923 172, 213
350924 172, 212
350925 172, 212
350942 171, 183, 191, 200
350943 171, 183, 191, 200
350944 171, 183, 191, 200
350945 171, 183, 191, 200
350948 171, 185
350949 171, 185
350967 106, 205
350968 106, 205
350969 106, 205
350986 171, 183
350987 171, 183
350988 171, 183
350989 171, 183
Part No. Page
350561 172, 212
350570 172, 212
350576 153, 162
350577 153, 162
350578 153, 162
350579 153, 162
350582 171, 182
350583 171, 182
350584 171, 182
350585 171, 182
350586 171, 182
350587 171, 182
350588 171, 182
350589 175
350590 173
350591 112
350628 55, 211
350629 55, 211
350638 155
350639 155
350641 153, 162
350642 153, 162
350643 153, 162
350644 153, 162
350654 173, 181, 213
350669 173, 181
350687 173, 181, 213
350689 172
350690 172
350699 173, 213
350700 173, 213
350705 173, 181
350706 173
350707 173
350711 171, 182, 191, 197
350712 171, 182, 191, 197
350713 171, 182, 191, 197
350714 171, 182, 191, 197
350715 171, 174, 182-183,
197-198
350720 171, 174, 182-183,
197-198
350732 171, 182, 191, 197
350735 171, 174, 182-183,
197-198
350736 171, 174, 182-183,
197-198
350737 171, 182, 191, 197
350738 171, 182, 191, 197
350742 171, 182, 191, 197
350759 171, 183
350760 171, 183
350761 171, 183
350762 171, 183
350763 171, 183
350764 171, 183
350765 171, 183
350766 171, 174, 182-185,
197-200
350767 171, 174
350777 171, 174, 182-185,
197-200
350778 171, 174
Part No. Page
350990 171, 183
350991 171, 183
350992 171, 183
353891 60, 78
380935 116
380936 116
380937 116
380991 153, 161
380999 153, 161
480270 153, 158, 160-161
480271 153, 160
480273 153, 159
480274 153, 159
480275 153, 159
480276 153, 159, 162
480277 153, 159, 162
480278 153, 159, 162
480283 153, 158, 160-161
480284 153, 160
480285 153, 158, 160-161
480286 153, 160
480287 153, 160-161
480288 153, 160
480303 153, 157, 161, 163
480304 153, 159
480305 153, 157, 159
480318 153, 157, 161, 163
480319 153, 157
480323 153, 159
480324 153, 159, 162
480339 153, 158
480340 153, 158
480345 153, 158
480349 153, 157
480350 153, 157
480351 153, 157
480387 153, 157
480388 153, 157
480393 153, 157
480400 153, 157
480401 153, 157
480424 154, 157, 165, 163-164
480425 154, 159
480426 154, 157, 165, 162-163
480438 153, 160-161
480439 153, 160
480498 153, 157
480510 166
480512 166
480585 166
480586 166
480594 116
480634 116
480672 167
480673 167
480698 171, 174, 182-184
480699 171, 174
480700 171, 174, 182-184
480701 171, 174
480702 171, 174, 182-185
480703 171, 174
480704 171, 174, 182-183
Part No. Page
480705 171, 174
480706 171, 174, 182-183
480707 171, 174
480708 171, 174, 182-183
480709 171, 174
480710 171, 174, 182-183
480711 171, 174
480720 153,158,161
480721 153,158,161
480722 158, 161
480763 171, 174, 182-183, 185
480764 171, 174
480772 154
640309 172
640310 172
640347 172
640391 55, 211
640392 55, 211
640415 173
640466 171, 182
640467 171, 183
640497 105, 112
640498 105, 112
640499 105, 112
640500 105, 112
640501 105, 112
640502 105, 112
640503 105, 112
640504 105, 112
640505 105, 112
640506 105, 112
640507 105, 107
640508 105, 107
640509 105, 107
640510 105, 107
640511 105, 108
640512 105, 108
640513 105, 108
640514 105, 108
640515 105, 108
640516 105, 108
640517 105, 107, 112
640518 105, 107, 112
640519 105, 107, 112
640520 105, 107, 112
640521 105, 108, 112
640522 105, 108, 112
640523 105, 108, 112
640524 105, 108, 112
640525 105, 108, 112
640526 105, 108, 112
640545 112
640579 112
640580 112
640581 171, 174, 182-183, 185
640582 171, 174, 182, 185
640583 171, 185
640584 171, 185
640585 171, 174, 182, 185
640586 171, 174, 182, 185
640587 171, 185
640713 180, 196
Part No. Page
222
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Part Number Index (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Part Number Index
640714 180, 196
640715 180, 196
640716 180, 196
640717 180, 196
640718 180, 196
640719 176
640720 176
640721 176
640722 176
640723 176
640724 176
640900 171, 182, 191, 197
640901 171, 183, 191, 198
641083 171
641294 106, 205
641300 112
641737 154, 163
641763 176
641775 176
641776 180, 196
641777 176
641778 176
641825 171, 182
641828 171, 182
641831 171, 182
641832 171, 182
641945 180, 196
641963 171, 182
641964 171, 182, 191, 197
641965 171, 182
641966 171, 182, 191, 197
641967 171, 182
641968 171, 182, 191, 197
641969 171, 182
641970 171, 182, 191, 197
641971 171, 182
641972 171, 182, 191, 197
641973 171, 182
641974 171, 182, 191, 197
641975 171, 182
641976 171, 182, 191, 197
643030 180, 196
643182 176
643226 171, 183, 191, 200
643228 171, 183, 191, 200
643230 171, 183, 191, 200
643232 171, 183, 191, 200
643234 171, 185
643235 185
643236 171, 185
643237 185
643313 176
643314 176
643405 171, 182
643406 171, 182, 191, 197
643407 171, 182
643408 171, 182
643410 171, 182
643411 171, 183
643412 171, 183, 191, 198
643413 171, 183
643414 171, 183, 191, 198
Part No. Page
643415 171, 183
643416 171, 183, 191, 198
643423 171, 183
643424 171, 183, 191, 198
643425 171, 183
643426 171, 183, 191, 198
643428 171, 183, 191, 198
643429 171, 183
643430 171, 183, 191, 198
643488 153, 163
643585 176
643749 182
770003 192, 213
770004 192, 213
770005 192, 213
770006 192, 213
770007 192, 213
770008 192, 213
770009 192, 213
770010 192, 213
770011 192, 213
770012 192, 213
770016 194-195, 185, 191,
193, 195, 197-198
770017 194-195, 191, 193,
195, 197-201
770018 194-195, 191, 193,
195, 197-201
770019 194-195, 191, 193,
195, 197-1201
770020 194-195, 191, 194-195,
197-198, 201
770021 194-195, 191, 194-195,
197-198, 201
770022 194-195, 191, 194-195,
197-198, 201
770023 194-195, 191, 194-195,
197-198, 201
770024 191, 193, 195, 201
770025 191, 193, 195, 201
770026 191, 193, 195, 201
770027 191, 194-195, 201
770028 191, 194-195, 201
770029 191, 194-195, 201
770030 191, 194-195, 201
770031 195
770032 195
770033 195
770034 195
770035 195
770036 195
770037 195
770038 195
770039 195
770040 195
770041 195
770042 195
770043 195
770044 195
770045 195
770046 195
770047 195
770048 195
770049 195
Part No. Page
770050 195
770051 195
770052 195
770053 195
770054 195
770055 195
770056 195
770057 195
770058 195
770063 146
770064 146
770065 146
770066 146
770068 146
770069 146
770070 146
770071 146
770073 146
770074 146
770075 146
770076 146
770077 146
770078 146
770083 146
770084 146
770085 146
770086 146
770087 146
770088 146
770089 146
770090 146
770091 146
770092 146
770093 146
770094 146
770095 146
770096 146
770097 146
770098 146
770099 146
770100 146
770101 146
770102 146
770103 146
770105 146
770106 146
770107 146
770108 146
770143 171, 182
770144 145
770145 145
770146 145
770147 145
770156 154, 163
770166 85, 90, 103, 107
770170 85, 90, 103, 107
770174 85, 90, 103, 107
770178 85, 90, 103, 107
770182 85, 90, 103, 107
770186 85, 90, 103, 107
770190 85, 90, 103, 107
770193 192, 213
Part No. Page
770194 192, 213
770210 173, 213
770232 163
770233 163
770234 173, 213
770246 192
770247 192
770248 192
770249 192
770250 192
770251 192
770252 192
770253 192
770254 192
770255 192
770262 171, 183
770264 146
770266 146
770269 148
770272 182
770274 56
770275 56
770276 148
770277 56
770278 56
770319 195
770320 195
770326 56
770329 148
770330 148
770331 56
770332 56
770333 56
770334 56
770335 56
770336 148
770337 148
770338 148
770339 148
770340 56
770341 56
770342 56
770343 56
770351 182
770353 56
770354 56
770355 56
770356 56
770360 148
770361 148
770364 145, 149
770365 145, 149
770372 148
770373 148
770377 180, 196
770383 145, 212
770385 145, 212
770416 192
770419 56
770421 171, 174
770424 149
770425 149
Part No. Page
223
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Part Number Index (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Part Number Index
770973 85, 91, 105, 107
770974 85, 91, 105, 107
770983 53, 55
770985 85, 96
770986 85, 96
770987 85, 96
770988 85, 96
770994 185
770997 154, 162
794000 106, 205
794001 112
794012 153, 158
794015 146
794016 55
794017 55
794018 55
794019 55
794036 154, 163
794040 85, 90, 103, 107
794046 55, 211
794058 86
794059 86
794061 167
794065 85, 90, 103, 107
794066 85, 90, 103, 107
794067 85, 90, 103, 107
794068 85, 90, 103, 107
794069 85, 90, 103, 107
794070 85, 90, 103, 107
794071 85, 90, 103, 107
794072 85, 90, 103, 107
794073 85, 90, 103, 107
794074 85, 90, 103, 107
794075 85, 90, 103, 107
794076 85, 90, 103, 107
794077 85, 90, 103, 107
794078 85, 90, 103, 107
794079 85, 90, 103, 107
794096 171, 174
794103 55, 211
794105 85, 91, 105, 107
794106 85, 91, 105, 107
794107 85, 91, 105, 107
794108 85, 91, 105, 107
794116 214
794117 214
794118 214
794120 153, 163
794132 154, 157
794138 126, 212
794139 126, 212
794140 126, 212
794141 126
794142 126
794143 126
794184 90, 92, 101, 103,
105, 107
794185 101, 107
794186 90, 92, 101, 103,
105, 107
794187 101, 107
794188 90-92, 99, 101-102, 107
Part No. Page
770426 56
770427 56
770428 56
770429 56
770433 56
770441 56
770442 56
770443 56
770450 145, 149
770451 145, 149
770452 145, 149
770453 145, 149
770512 192
770526 154
770529 145, 212
770530 145, 212
770579 85, 88, 90-93, 103-106
770580 85, 88, 90-93, 103-106
770581 85, 88, 90, 92, 103, 105
770582 85, 88, 90, 92, 103, 105
770583 85, 88, 90, 92, 103, 105
770584 85, 88, 90, 92, 103, 105
770585 85, 88, 90, 92, 103, 105
770586 85, 88, 90, 92, 103, 105
770587 85, 88, 90, 92, 103, 105
770621 85, 90, 103, 107
770672 172
770673 172
770743 85, 90, 103, 107
770771 148
770782 146
770783 149
770784 149
770785 149
770810 149
770827 154, 157, 163
770829 154, 162-163
770834 85, 211
770835 85, 211
770842 146
770843 146
770846 154, 163
770858 85, 90, 103, 107
770859 85, 90, 103, 107
770872 85, 90, 103, 107
770872 97
770873 85, 90, 103, 107
770874 85, 90, 103, 107
770875 85, 90, 103, 107
770876 85, 90, 103, 107
770892 146
770901 86, 96, 211
770902 86, 96, 211
770903 86, 96, 211
770904 86, 96, 211
770966 85, 91, 105, 107
770967 85, 91, 105, 107
770968 85, 91, 105, 107
770969 85, 91, 105, 107
770970 85, 91, 105, 107
770971 85, 91, 105, 107
770972 85, 91, 105, 107
Part No. Page
794189 101, 107
794190 90-92, 99, 101-102, 107
794191 101, 107
794192 90-91, 100-101, 105, 107
794193 101, 107
794194 90-91, 100-102, 107
794195 101, 107
794196 90-91, 100-105, 107
794197 101, 107
794198 90, 92, 100-101,
105, 107
794199 101, 107
794200 90-91, 100-102, 107
794201 101, 107
794202 90, 92, 100-101,
105, 107
794203 101, 107
794204 90-91, 100-102, 107
794205 101, 107
794206 90, 92, 100-101,
105, 107
794207 101, 107
794208 90, 92, 100-101,
105, 107
794209 101, 107
794210 90, 92, 100-101,
105, 107
794211 101, 107
794212 90, 92, 100-101,
105, 107
794213 101, 107
794214 90, 92, 100-101,
105, 107
794215 101, 107
794216 100, 211
794217 100, 211
794218 100, 211
794219 100, 211
794220 100, 211
794221 100, 211
794222 100, 211
794223 100, 211
794224 100
794225 100
794226 100
794227 100
794228 100
794229 100
794230 100
794231 100
794236 154, 161
794237 101, 107
794238 101, 107
794239 101, 107
794240 101, 107
794241 101, 107
794242 101, 107
794243 101, 107
794244 101, 107
794245 101, 107
794246 101, 107
794247 101, 107
794248 101, 107
794249 101, 107
Part No. Page
794250 101, 107
794251 101, 107
794252 101, 107
794253 101, 107
794254 101, 107
794255 101, 107
794256 101, 107
794257 101, 107
794258 101, 107
794259 101, 107
794260 101, 107
794261 101, 107
794262 101, 107
794263 101, 107
794264 101, 107
794265 101, 107
794266 101, 107
794267 101, 107
794268 101, 107
794269 179
794270 179
794271 179
794272 179
794273 179
794274 179
794275 179
794276 179
794277 179
794278 179
794279 179
794280 179
794281 179
794282 179
794285 162
794287 154, 162
794302 128
794303 128
794304 128
794305 129
794306 129
794307 130
794308 130
794309 131
794310 131
794311 132
794312 132
794313 133
794325 85, 90, 104, 107
794326 85, 90, 104, 107
794327 85, 90, 104, 107
794328 85, 90, 104, 107
794329 85, 90, 104, 107
794330 85, 90, 104, 107
794349 128
794350 128
794351 128
794352 129
794353 129
794354 130
794355 130
794356 131
794357 131
Part No. Page
224
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Part Number Index (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Part Number Index
794358 132
794359 132
794360 133
794369 101
794370 94
794374 85, 92
794380 53, 55
794406 86
794407 86
794412 214
794413 214
794415 132
794418 126,212
794421 126
794423 94
794429 131
794432 85, 90, 104, 107
794448 133
794449 133
794453 130
794454 131
794455 132
794466 128
794467 128
794468 129
794469 129
794470 130
794471 132
794472 133
794484 128
794485 128
794486 129
794487 129
794488 130
794489 130
794490 131
794491 131
794492 132
794493 132
794494 133
794507 133
794508 133
794509 133
794510 133
794511 133
794512 133
794513 133
794514 133
794515 133
794516 133
794526 133
794527 133
794528 133
794529 133
794530 133
794531 133
794532 133
794533 133
794534 133
794535 171
794536 171
794537 171
Part No. Page
794538 171
794540 128
794542 127
794543 128
794545 171
794546 171
794550 127
794576 121, 206
794577 127
794578 121, 206
794579 127
794588 133
794589 133
794590 133
794594 127
794598 127
794606 19-22, 211
794606 20
794607 19-22, 211
794608 19, 22, 211
794609 19, 22, 211
794610 19-22
794610 20
794611 19-22
794611 20
794612 19, 22
794613 19, 22
794615 19, 28
794616 19, 27
794617 19, 21, 24, 34-37,
43-47
794618 21, 44
794619 21, 44
794620 21, 44
794621 21, 46
794622 21, 46
794623 21, 46
794624 21, 45
794625 21, 45
794626 21, 45
794627 21, 47
794628 21, 47
794629 21, 47
794630 21, 34
794631 21, 34
794632 21, 34
794633 21, 36
794634 21, 36
794635 21, 36
794636 21, 37
794637 21, 37
794638 21, 37
794657 126
794677 21, 43
794678 21, 43
794679 21, 43
794680 21, 35
794681 21, 35
794682 21, 35
794683 167
794699 167
794700 166
Part No. Page
794707 171
794714 177
794715 177
794716 177
794727 171
794758 96
794760 177
794761 177
794762 177
794772 96
794772 97
794781 85, 96
794781 97
794805 85, 96
794805 97
794814 171
794815 171
794821 85, 96
794821 97
794824 96
794824 97
794851 171
794863 171
794894 85, 96
794894 97
794895 85, 96
794896 85, 96
794899 171
794900 171
794901 171
794911 191
794912 191
794939 85, 96
794940 85, 96
794941 85, 96
794942 85, 96
794953 122
794954 122
794955 114, 206
794956 114, 206
794957 114, 206
794958 114, 206
794991 180
794992 180
794993 180
794994 180
794995 96
797607 20
917353 61, 81
917354 61, 76-77
917683 12-13, 205
917684 12-13, 205
917686 10, 12-13
917687 10, 12-13
917688 10, 12-13
917689 10, 12-13
917690 10, 12-13
917691 10, 12-13
917692 10, 12-13
917693 10, 12-13
917694 10, 12-13
917695 10, 12-13
Part No. Page
917696 10, 12-13
917697 10, 12-13
917698 10, 12
917699 10, 12
917700 10, 12
917701 10, 12
917702 10, 12
917703 10, 12
917704 10, 12
917705 10, 12
917706 10, 12
917707 10, 12
917708 10, 12
917709 10, 12
917722 10, 16
917723 10, 16
917724 10, 16
917725 10, 16
917726 10, 16
917727 10, 16
917728 10, 16
917729 10, 16
917730 10, 16
917731 10, 16
917732 10, 16
917733 10, 16
917745 61, 79
917746 79
917747 80
917764 12, 14, 205
917765 12, 14, 205
917780 10, 15
917781 10, 15
917782 10, 15
917783 10, 15
917784 10, 15
917785 10, 15
917786 10, 15
917787 10, 15
917788 10, 15
917789 10, 15
917790 10, 15
917791 10, 15
917845 61,73
917894 15
917895 15
917896 15
917897 15
917898 15
917899 15
917900 15
926302 171, 174
926307 171, 174
926308 171, 174
926309 171, 174
1375618 126-127
1376294 136
1376347 137, 212
1376348 137, 212
1376382 136, 138, 140
1376383 136, 138, 140
1376384 136, 138, 140
Part No. Page
225
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Part Number Index (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Part Number Index
1445087 20, 33
1445088 20, 38
1445089 20, 39
1445090 20, 40
1445091 20, 41
1445092 20, 42
1445093 20, 30
1445094 20, 31
1445095 20, 32
1445096 20, 33
1445097 20, 38
1445098 20, 39
1445099 20, 40
1445100 20, 41
1445101 20, 42
1565079 50, 211
1565080 50, 211
1565081 51
1565082 51
1565083 52
1565084 52
1565085 51
1565086 51
1565087 52
1565088 52
1586000 122
1586017 122
1586018 122
1586019 122
1586022 121
1586023 121
1586024 121
1586025 121
1586026 121
1586027 121
1586037 123
Part No. Page
1376385 136, 138, 140
1376386 136, 139, 141
1376387 136, 139, 141
1376388 136-138, 140
1376389 136-138, 140
1376390 136-138, 140
1376391 136-138, 140
1376392 136, 139, 141
1376393 136, 139, 141
1376394 136-139
1376395 136-139
1376396 136-138
1376397 136-138
1376421 136, 138, 140
1376437 140
1376439 140
1376440 140
1376441 140
1376442 140
1376443 140
1376444 140
1445022 19-20, 23, 30-33, 38-42
1445048 19, 26
1445049 19, 25
1445050 20, 30
1445051 20, 31
1445052 20, 32
1445053 20, 33
1445054 20, 38
1445055 20, 39
1445056 20, 40
1445057 20, 41
1445058 20, 42
1445084 20, 30
1445085 20, 31
1445086 20, 32
Part No. Page
1586038 123
1586039 123
1586040 123
1586041 123
1586042 123
1586043 123
1586044 123
1586101 121
1586102 121
1586103 121
1586104 121
1586105 121
1586106 121
1586305 167
1586314 121
1586315 121
1586316 121
1586317 121
1586359 97
1586359 96
1586362 96
1586362 97
1586404 96
1586489 128-133
1586490 128-133
1586491 128-133
1586492 128-133
1586493 128-133
1586494 128-133
1586495 128-133
1586496 128-133
1586512 153, 161
1586514 153, 161
1586515 154, 161
1586518 153, 161
1586520 153, 161
Part No. Page
1586522 153, 161
1586524 153, 161
1586525 154, 161
1586526 153, 161
1586528 153, 161
1586529 153, 161
1586530 153, 161
1586532 153, 161
1586534 154, 161
1586536 154, 161
1586539 162
1586544 153, 161
1586546 153, 161
1586585 124
1586586 124
1586587 124
1586588 124
1586627 161
1604210 178
1604254 178
1604256 178
1604941 178
1612334 50, 211
1612335 50, 211
1903486 60, 78
1903487 60, 78
1903720 60 ,66
1939343 60 ,73, 78
1939344 60
2029030 20, 29
2029047 20, 29
2029056 97
2029058 97
2029102 20, 29
2029104 20, 29
Part No. Page
226
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Part Number Index (Continued)
AMP
Soft Shell
Pin and Socket Connectors
Part Number Index
58074 163, 206
58373 166, 210
58374 166, 210
58380 172, 192, 210
58382 192, 201, 206
58439 172, 192, 210
58514 210
58631 203, 210
58632 203, 210
65780 209-210
69710 166, 172, 192, 210
82276 210
90247 166
90546 210
90547 210
90548 210
90574 210
90575 210
90714 126,210
90717 86, 100,210
90758 210
90759 210
90760 210
90869 55, 210
90870 55, 210
90871 145,210
90872 145, 210
91002 55, 86, 145, 172,
181, 192, 203, 206
91085 163, 206
91112 163, 206
91387 120, 210
91388 120, 210
91500 172-173, 181,
192, 210
91501 22, 209-210
Part No. Page
91502 22, 209-210
91504 155, 210
91506 172-173, 192,210
91508 172-173, 192,210
91510 172-173, 192,210
91512 155-156, 210
91515 155, 210
91522 86, 96, 100, 210
91526 112, 210
91528 155
91529 86, 96, 100, 210
91534 112, 210
91536 86
91552 210
91567 61, 210
91569 61, 210
91594 100, 210
188688 126
189727 86, 206
231894 163, 206
231920 163, 206
234603 12, 210
234604 12, 210
234605 12
234912 61
234914 61
305183 155, 206
318831 55, 206
318837 145, 206
318845 166, 206
318851 172, 181, 192,
201, 206
354500 207
356114 201
356337 201
356500 208
Part No. Page
455822 112, 206
455830 112, 155, 206
457306 116
465644 155, 206
466320 155-156, 172-173,
212-213
466351 112, 211
466352 112, 211
466426 155, 212
466462 203, 213
466588 172, 213
466597 172-173, 213
466616 172, 212
466656 145, 212
466686 55, 211
466878 145, 212
466913 211
466917 212-213
466920 212-213
466922 212
466955 211
466959 212
466986 211
466989 213
466990 211
567066 86, 96, 100, 211
567067 86, 96, 211
567211 192, 213
567212 192, 213
567213 192, 213
567214 192, 213
567216 173, 213
567251 211
567252 192, 213
567273 145, 212
567306 166, 212
Part No. Page
567309 166, 212
567337 145, 212
567418 86, 100, 211
567902 211
567913 213
567914 213
567959 126-127, 212
567960 126-127, 212
587309 212
680307 126-127, 212
680308 126-127, 212
680350 126, 212
680582 86, 100, 211
680854 100, 211
680893 22, 211
680894 22, 211
687763 155, 172-173,
181, 212-213
687765 155, 212
687898 172-173, 213
687926 55, 211
687996 203, 206
691458 181
794381 22
843996 207
854040 22, 211
1385194 22, 211
1385377 120, 212
1385448 120, 212
1385817 120
1586343 22
1586344 172, 206
1586700 50, 210
1596277
Part No. Page
227
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Tooling Part Number Index
AMP
Soft Shell
Pin and Socket Connectors
Tooling Part Number Index
228
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Engineering Notes
AMP
Soft Shell
Pin and Socket Connectors
229
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Engineering Notes
AMP
Soft Shell
Pin and Socket Connectors
230
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 4-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Engineering Notes
AMP
Soft Shell
Pin and Socket Connectors
82181–7.5M–MS–FP–4-08 0G3B Tyco Electronics Corporation
Printed in the U.S.A. www.tycoelectronics.com
231
Global Contacts
Americas
Argentina – Buenos Aires
Phone: +54-11-4733-2200
Fax: +54-11-4733-2211
Brasil – São Paulo
Phone: +55-11-3611-1311
Fax: +55-11-3611-0397
Canada – Toronto
Phone: +905-475-6222
Fax: +905-474-5520
Product Information Center:
(Technical Support)
Phone: +905-470-4425
Fax: +905-474-5525
Colombia – Bogota
Phone: +57-1-231-9398
Fax: +57-1-660-0206
Mexico – Mexico City
Phone: +52-55-1106-0800
+01-800-733-8926
Fax: +52-55-1106-0901
United States – Harrisburg, PA
Phone: +717-564-0100
Fax: +717-986-7575
Product Information Center:
(Technical Support)
Phone: +800-522-6752
Fax: +717-986-7575
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax: +54-11-4733-2083
Asia/Pacific
Australia – Sydney
Phone: +61-2-9554-2600
Fax: +61-2-9502-2556
Product Information Center:
(Technical Support)
Phone: +61-2-9840-8200
Fax: +61-2-9634-6188
India – Bangalore
Phone: +91-80-285-40800
Fax: +91-80-285-40820
Indonesia – Jakarta
Phone: +65-6482-0311
Fax: +65-6482-1012
Japan – Toyko
Phone: +81-44-844-8111
Fax: +81-44-812-3207
Product Information Center:
(Technical Support)
Phone: +81-44-844-8013
Fax: +81-44-812-3200
Korea – Seoul
Phone: +82-2-3415-4500
Fax: +82-2-3486-3810
Malaysia – Kuala Lumpur
Phone: +60-3-78053055
Fax: +60-3-78053066
New Zealand – Auckland
Phone: +64-9-634-4580
Fax: +64-9-634-4586
Philippines – Makati City
Phone: +632-848-0171
Fax: +632-867-8661
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Fax: +852-2735-0243
Shanghai
Phone: +86-21-2407-1588
Fax: +86-21-2407-1599
Taiwan – Taipei
Phone: +886-2-8768-2788
Fax: +886-2-8768-2268
Singapore – Singapore
Phone: +65-6482-0311
Fax: +65-6482-1012
Thailand – Bangkok
Phone: +66-2-955-0500
Fax: +66-2-955-0505
Vietnam and Indochina –
Ho Chi Minh City
Phone: +84-8 930-5546
Fax: +84-8 930-3443
Europe/Middle East/Africa
Austria – Vienna
Phone: +43-1 90 5 60-0
Fax: +43-1 90 5 60-1333
Belgium – Kessel-Lo
Phone: +32-16-35-23-00
Fax: +32-16-35-23-52
Bulgaria – Sofia
Phone: +359-2-971-2152
Fax: +359-2-971-2153
Czech Republic – Kurim
Phone: +420-5-41-162-111
Fax: +420-5-41-162-223
Denmark – Glostrup
Phone: +45-43-480-452
Fax: +45-43-441-414
Egypt – Cairo
Phone: +20-2-29 04 281
Fax: +20-2-41 92 334
Estonia – Tartu
Phone: +372-5138-274
Fax: +372-7400-779
Finland – Helsinki
Phone: +358-95-12-34-20
Fax: +358-95-12-34-250
France – Cergy-Pontoise
Phone: +33-1-3420-8888
Fax: +33-1-3420-8600
Product Information Center:
(Technical Support)
Phone: +33-1-3420-8943
Fax: +33-1-3420-8623
Germany – Bensheim
Phone: +49-6251-133-0
Fax: +49-6251-133-1600
Product Information Center:
(Technical Support)
Phone: +49-6251-133-1999
Fax: +49-6251-133-1988
Germany – Langen
Phone: +49-6103-709-0
Fax: +49-6103-709-1223
Germany – Speyer
Phone: +49-6232-30-0
Fax: +49-6232-30-2243
Germany - HTS Division – Neunkirchen
Phone: +49-2247-305-0
Fax: +49-2247-305-122
Greece – Athens
Phone: +30-210-9370-396/397
Fax: +30-210-9370-655
Hungary – Budapest
Phone: +36-1-289-1000
Fax: +36-1-289-1010
Ireland – Dublin
Phone: +353-1-820-3000
Fax: +353-1-820-9790
Israel – Yokneam
Phone: +972-4-959-0508
Fax: +972-4-959-0506
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Fax: +39-011-4031116
Lithuania – Vilnius
Phone: +370-5-2131-402
Fax: +370-5-2131-403
Netherlands – ’s-Hertogenbosch
Phone: +31-73-624-62-46
Fax: +31-73-621-23-65
Product Information Center:
(Technical Support)
Phone: +31-73-6246-999
Fax: +31-73-6246-998
Norway – Nesbru
Phone: +47-66-77-8886
Fax: +47-66-77-8855
Poland – Warsaw
Phone: +48-22-45-76-700
Fax: +48-22-45-76-720
Romania – Bucharest
Phone: +40-21-311-3479/3596
Fax: +40-21-312-0574
Russia – Moscow
Phone: +7-495-926-5506/07/08/09
Fax: +7-495-926-5505
Russia – St. Petersburg
Phone: +7-812-718-8192
Fax: +7-812-718-8193
Slovenia – Ljubljana
Phone: +386-1561-3270
Fax: +386-1561-3240
South Africa – Port Elizabeth
Phone: +2741-503-4500
Fax: +2741-581-0440
Spain – Barcelona
Phone: +34-93-291-0330
Fax: +34-93-201-7879
Product Information Center:
(Technical Support):
Phone: +34-93-291-0330
Fax: +34-93-200-3779
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Fax: +46-8-50-72-50-01
Switzerland – Steinach
Phone: +41-71-447-0447
Fax: +41-71-447-0444
Turkey – Istanbul
Phone: +90-212-281-8181/2/3
Fax: +90-212-281-8184
Ukraine – Kiev
Phone: +380-044-206-2265
Fax: +380-044-206-2264
United Kingdom – Swindon
Phone: +44-8706-080-208
Fax: +44-1793-572-516
Product Information Center:
(Technical Support)
Freephone GB: 0800-267-666
Phone: +44-8706-080-208
Fax: +44-208-420-8081
For Middle East/African Countries Not
Shown
Phone: +33-1-3420-8866
Fax: +33-1-3420-8300
231
Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
82181–7.5M–MS–FP–4-08–2–0G3B
AMP Soft Shell Pin
and Socket Connectors
Catalog 82181 Revised 4-08 Soft Shell Pin and Socket Connectors
