47
Advanced Technology Filters
Miniature, Subminiature & Microminiature
APPLICATIONS
AVX’s Miniature filter line breaks the “small” size barrier. These
ultraminiature products, available as solder-in or screw-in style,
have case diameters as low as .073". Threaded filters will allow
substitution, flexibility of placement and simple installation, while
solder-in parts will provide hermeticity of your microcircuit pack-
ages. Now, with capacitance values of up to 50,000 pF, “C”, “L”
or “T” circuits, superior insertion loss over on-board
filtering, variety of ultra small and lightweight sizes, you can meet
all “mission critical” objectives. World’s smallest and most
complete miniature EMI filter line is especially well suited for
microwave industry, medical electronics, avionics instrumenta-
tion, satellites or other applications where space is at premium.
1
2
3
4
5
6
3
1
2
3
4
6
3
FEATURES
■World’s smallest filters, a “must”
for avionics and space industry.
■Tiny size for miniaturization of
microwave and telecom equip-
ment.
■Hardware real-estate and weight
reduction of up to 60%.
■Most complete product offering
with solder-in or bolt installation.
■Discoidal capacitor design to
meet cost/reliability goals.
SPECIFICATIONS
Mechanical
Material: Solder-In: Case and Leads:
Kovar per ASTM F-15
Screw-in: Case: CRS per ASTM-108
Leads: Copper clad steel
(1-64 & 2-56 Thd.)
Copper (4-40 & 8-36 Thd.)
Finish: Solder-in: Gold per Mil-G-45204
Screw-in: Gold per Mil-G-45204 (standard)
Silver optional (1-64 & 2-56 Thd.)
Silver per QQ-S-365 (standard)
Gold optional (4-40 & 8-36 Thd.)
Electrical
Capacitance: measured @ 1KHz and .1 to 1 VRMS, 25°C
Dissipation factor: 3% max.
Insulation resistance: 10,000 Mohms min. @ 25°C, WVDC;
1000 Mohms min. @ 125°C, WVDC
DC resistance: .02 ohm max.
Dielectric withstanding voltage: 200% of WVDC min.
1– LEAD 2– CASE 3– EPOXY
4– SOLDER 5– GLASS SEAL 6– CAPACITOR
NOTE: Torque limiting tool with custom adapter available upon request.
48
SPECIFICATIONS
MINIMUM NO LOAD INSERTION LOSS
AVXVoltage Min. Current
(db) @ 25°C PER MIL-STD-220
Part Vdc Cap Idc
10 30 100 300 1 10
Number (V) (pF) (A) MHZ MHZ MHZ MHZ GHZ GHZ
ZXS1C3-502 50 5000 1.5 15 22 35 45 55 60
ZXS1C3-272 50 2700 1.5 10 17 30 38 50 60
ZXS1A3-152 100 1500 1.5 5 12 25 33 45 55
ZXS1A3-102 100 1000 1.5 4 10 22 30 42 55
ZXS1A3-501 100 500 1.5 – – 15 25 35 50
ZXS1A3-251 100 250 1.5 – – 10 17 27 40
ZXS1B3-101 200 100 1.5 – – 3 10 20 30
ZXS1B3-500 200 50 1.5 – – 1 6 15 25
ZXS1B3-250 200 25 1.5 – – – 1 10 22
ZXS1B3-100 200 10 1.5 – – – – 3 20
ZXS1B3-5R0 200 5 1.5 – – – – – 15
ZXS1B3-000 200 2 max. 1.5 – – – – – –
ZYS1C3-273 50 27000 2.5 30 37 43 53 65 70
ZYS1C3-103 50 10000 2.5 20 27 37 47 60 65
ZYS1A3-502 100 5000 2.5 15 22 35 45 55 60
ZYS1A3-272 100 2700 2.5 10 17 30 38 50 60
ZYS1A3-152 100 1500 2.5 5 12 25 33 45 55
ZYS1B3-102 200 1000 2.5 4 10 22 30 42 55
ZYS1B3-501 200 500 2.5 – – 15 25 35 50
ZYS1B3-251 200 250 2.5 – – 10 17 27 40
ZYS1B3-101 200 100 2.5 – – 3 10 20 30
ZYS1B3-500 200 50 2.5 – – 1 6 15 25
ZYS1B3-250 200 25 2.5 – – – 1 10 22
ZYS1B3-100 200 10 2.5 – – – – 3 20
ZYS1B3-5R0 200 5 2.5 – – – – – 15
ZYS1B3-000 200 2 max. 2.5 – – – – – –
ZZS1C3-503 50 50000 5 35 40 45 55 70 70
ZZS1C3-273 50 27000 5 30 37 43 53 65 70
ZZS1A3-103 100 10000 5 20 27 37 47 60 65
ZZS1B3-502 200 5000 5 15 22 35 45 55 60
ZZS1B3-272 200 2700 5 10 17 30 38 50 60
ZZS1B3-152 200 1500 5 5 12 25 33 45 55
ZZS1B3-102 200 1000 5 4 10 22 30 42 55
ZZS1B3-501 200 500 5 – – 15 25 35 50
ZZS1B3-251 200 250 5 – – 10 17 27 40
ZZS1B3-101 200 100 5 – – 3 10 20 30
ZZS1B3-500 200 50 5 – – 1 6 15 25
ZZS1B3-250 200 25 5 – – – 1 10 22
ZZS1B3-100 200 10 5 – – – – 3 20
ZZS1B3-5R0 200 5 5 – – – – – 15
ZZS1B3-000 200 2 max. 5 – – – – – –
SOLDER-IN STYLE, C TYPE
NOTE: Dimensions in inches (millimeters).
EMI Filters
Miniature, Subminiature & Microminiature
CONFIGURATION OPTIONS
Terminals
Flattened at Glass Seal End Only
Glass Seal
Opposite Flange End – Standard
At Flange End – Reversed
Change 3rd letter of part number from
“S” to “R” for reversed configuration
Schematic
GLASS
SEAL
.110±.005
(2.79±0.13)
.008±.003
(0.20±0.08)
.030 (0.76)
MAX. POTTING
MENISCUS
.400±.020
(10.16±0.5)
.140±.020
(3.56±0.5)
.140±.005
(3.56±0.13)
.120±.002
(3.05±0.05)
.030±.002
(0.76±0.05)
GLASS
SEAL
.105±.002
(2.67±0.05)
.020±.002
(0.51±0.05)
.030 (0.76)
MAX. POTTING
MENISCUS
.350±.020
(8.89±0.5)
.125±.005
(3.18±0.13)
.125±.020
(3.18±0.5)
.008±.003
(0.20±0.08)
.100±.005
(2.54±0.13)
.075±.002
(1.90±0.05)
.093±.005
(2.36±0.13)
.100±.020
(2.54±0.5)
.275±.020
(6.98±0.5)
.016±.002
(0.41±0.05)
.075±.005
(1.90±0.13)
.008±.003
(0.20±0.08)
.030 (0.76)
MAX. POTTING
MENISCUS
GLASS
SEAL
"C" STANDARD
GLASS
SEAL
END
"L1"AVAILABLE
WITH EXTENDED
CASE LENGTH
49
SCREW-IN STYLE, C TYPE
1-64
THD.
2-56
EMI Filters
Miniature, Subminiature & Microminiature
SPECIFICATIONS
MINIMUM NO LOAD INSERTION LOSS
AVXVoltage Min. Current
(db) @ 25°C PER MIL-STD-220
Part Vdc Cap Idc
10 30 100 300 1 10
Number (V) (pF) (A) MHZ MHZ MHZ MHZ GHZ GHZ
SXD1C3-502 50 5000 3 15 22 35 45 55 60
SXD1C3-272 50 2700 3 10 17 30 38 50 60
SXD1A3-152 100 1500 3 5 12 25 33 45 55
SXD1A3-102 100 1000 3 4 10 22 30 42 55
SXD1A3-501 100 500 3 – – 15 25 35 50
SXD1A3-251 100 250 3 – – 10 17 27 40
SXD1B3-101 200 100 3 – – 3 10 20 30
SXD1B3-500 200 50 3 – – 1 6 15 25
SXD1B3-250 200 25 3 – – – 1 10 22
SXD1B3-100 200 10 3 – – – – 3 20
SXD1B3-5R0 200 5 3 – – – – – 15
SYD1C3-502 50 5000 3 15 22 35 45 55 60
SYD1C3-272 50 2700 3 10 17 30 38 50 60
SYD1A3-152 100 1500 3 5 12 25 33 45 55
SYD1A3-102 100 1000 3 4 10 22 30 42 55
SYD1A3-501 100 500 3 – – 15 25 35 50
SYD1A3-251 100 250 3 – – 10 17 27 40
SYD1B3-101 200 100 3 – – 3 10 20 30
SYD1B3-500 200 50 3 – – 1 6 15 25
SYD1B3-250 200 25 3 – – – 1 10 22
SYD1B3-100 200 10 3 – – – – 3 20
SYD1B3-5R0 200 5 3 – – – – – 15
SZD1C3-273 50 27000 5 30 37 43 53 65 70
SZD1C3-103 50 10000 5 20 27 37 47 60 65
SZD1A3-502 100 5000 5 15 22 35 45 55 60
SZD1A3-272 100 2700 5 10 17 30 38 50 60
SZD1A3-152 100 1500 5 5 12 25 33 45 55
SZD1B3-102 200 1000 5 4 10 22 30 42 55
SZD1B3-501 200 500 5 – – 15 25 35 50
SZD1B3-251 200 250 5 – – 10 17 27 40
SZD1B3-101 200 100 5 – – 3 10 20 30
SZD1B3-500 200 50 5 – – 1 6 15 25
SZD1B3-250 200 25 5 – – – 1 10 22
SZD1B3-100 200 10 5 – – – – 3 20
SZD1B3-5R0 200 5 5 – – – – – 15
NOTE: Dimensions in inches (millimeters). Torque limiting tool with custom adapter required for proper installation (see page 2)
CONFIGURATION OPTIONS
Terminals
“SZD” and “SYD” Parts Only
Slotted terminal available
on one or both sides
Mounting
.090 Thd. Length Standard,
intended for tapped hole
feed through mounting
.140 Thd. Length available
for through hole mounting
with hex nut
Schematic
MOUNTING TORQUE: 14 ± 2 oz-in
.110±.005
(2.79±0.13)
1.5 MAX. IMPERFECT THD.
NO UNDERCUT
#2-56UNC-2A THD.
.090±.005
(2.29±0.13)
.240±.020
(6.10±0.5)
.260±.020
(6.60±0.5)
.020±.003
(0.51±0.08)
.024±.002
(0.61±0.05)
.105±.005
(2.67±0.13)
.021±.001
(.53±0.03)
MOUNTING TORQUE: 14 ± 2 oz-in
.021±.001
(0.53±0.03)
.018±.002
(0.46±0.05)
.086±.003
(2.18±0.08)
.020±.003
(0.51±0.08)
.180±.020
(4.57±0.5)
.080±.005
(2.03±0.13)
1.5 MAX. IMPERFECT THD.
NO UNDERCUT
.190±.020
(4.83±0.5)
.090±.005
(2.29±0.13)
#2-56UNC-2A THD.
MOUNTING TORQUE: 7 ± 1 oz-in
.080±.005
(2.03±0.13)
.018±.002
(0.46±0.05)
.021±.001
(0.53±0.03)
.073±.003
(1.85±0.08)
.020±.003
(0.51±0.08)
.180±.020
(4.57±0.5)
.090±.005
(2.29±0.13)
.190±.020
(4.83±0.5)
#1-64UNC-2A THD.
1.5 MAX. IMPERFECT THD.
NO UNDERCUT
"C" STANDARD
"T"
THD.
END "L1"
AVAILABLE
WITH EXTENDED
CASE LENGTH
50
SPECIFICATIONS
MINIMUM NO LOAD INSERTION LOSS
AVXVoltage Min. Current (db) @ 25°C PER MIL-STD-220
Part Vdc Cap Idc
110100 300 1 10
Number (V) (pF) (A) MHZ MHZ MHZ MHZ GHZ GHZ
SA1C3-503 50 50000 10 15 35 45 55 70 70
SA1A3-273 100 27000 10 10 30 43 53 65 70
SA1A3-103 100 10000 10 4 20 37 47 60 65
SA1B3-502 200 5000 10 – 15 35 45 55 60
SA1B3-272 200 2700 10 – 10 30 38 50 60
SA1B3-152 200 1500 10 – 5 25 33 45 55
SA1B3-102 200 1000 10 – 4 22 30 42 55
SA1B3-501 200 500 10 – – 15 25 35 50
SA1B3-251 200 250 10 – – 10 17 27 40
SA1B3-101 200 100 10 – – 3 10 20 30
SA1B3-500 200 50 10 – – 1 6 15 25
SA1B3-250 200 25 10 – – – 1 10 22
SA1B3-100 200 10 10 – – – – 3 20
SA1B3-5R0 200 5 10 – – – – – 15
SA1C1-104 50 100000 10 20 40 50 60 70 70
SA1A1-503 100 50000 10 15 35 45 55 70 70
SA1A1-273 100 27000 10 10 30 43 53 65 70
SA1B1-103 200 10000 10 4 20 37 47 60 65
SA1B1-502 200 5000 10 – 15 35 45 55 60
SA1B1-272 200 2700 10 – 10 30 38 50 60
SA1B1-102 200 1000 10 – 4 22 30 42 55
SA1B1-501 200 500 10 – – 15 25 35 50
SA1B1-251 200 250 10 – – 10 17 27 40
SA1B1-101 200 100 10 – – 3 10 20 30
SA1B1-500 200 50 10 – – 1 6 15 25
SA1B1-250 200 25 10 – – – 1 10 22
SA1B1-100 200 10 10 – – – – 3 20
SA1B1-5R0 200 5 10 – – – – – 15
SZ1C1-503 50 50000 10 15 35 45 55 70 70
SZ1A1-273 100 27000 10 10 30 43 53 65 70
SZ1A1-103 100 10000 10 4 20 37 47 60 65
SZ1B1-502 200 5000 10 – 15 35 45 55 60
SZ1B1-272 200 2700 10 – 10 30 38 50 60
SZ1B1-152 200 1500 10 – 5 25 33 45 55
SZ1B1-102 200 1000 10 – 4 22 30 42 55
SZ1B1-501 200 500 10 – – 15 25 35 50
SZ1B1-251 200 250 10 – – 10 17 27 40
SZ1B1-101 200 100 10 – – 3 10 20 30
SZ1B1-500 200 50 10 – – 1 6 15 25
SZ1B1-250 200 25 10 – – – 1 10 22
SZ1B1-100 200 10 10 – – – – 3 20
SZ1B1-5R0 200 5 10 – – – – – 15
SCREW-IN STYLE, C TYPE 4-40 THD.
8-36
NOTE: Dimensions in inches (millimeters).
EMI Filters
Miniature, Subminiature & Microminiature
.040±.005
(1.02±0.13)
.240±.020
(6.10±0.50)
.187±.010
(4.75±0.25)
ø.030±.002
(0.76±0.05)
.360±.020
(9.14±0.50)
.025 MAX.(0.64)
IMPERFECT THD.
#8-36UNF-2A THD.
.015 MAX.(0.38)
UNDERCUT
.090±.010
(2.29±0.25)
MOUNTING TORQUE: 64 ± 4 oz-in
.120
(3.05)
.240±.031
(6.10±0.79)
.154 (3.91)
.159 (4.04)
ø.026±.002
(0.66±0.05)
.360±.031
(9.14±0.79)
.220±.010
(5.59±0.25)
#4-40UNC-2A THD.
.030 MAX.(0.762)
IMPERFECT THD.
.030 MAX.(0.762)
UNDERCUT
MOUNTING TORQUE: 32 ± 4 oz-in
.075±.005
(1.91±0.13)
.225±.020
(5.72±0.50)
.125±.003
(3.18±0.08)
ø.032±.002
(0.81±0.05)
.315±.020
(8.00±0.50)
.140±.005
(3.56±0.13)
#4-40UNC-2A THD.
.030 MAX.(0.762)
IMPERFECT THD.
.030 MAX.(0.762)
UNDERCUT
MOUNTING TORQUE: 32 ± 4 oz-in
THD.
END
"L2" AVAILABLE
FOR "SA" P/N
CONFIGURATION OPTIONS
Leads
Custom lead lengths and materials available
Chamfered or rounded lead tips for mating with connectors
Schematic
THD.
END
"L1" AVAILABLE
FOR "SZ" P/N
