HDSP-C3x1/C3x3
0.36” Single Digit PCB Based LED Display
Data Sheet
Description
This is 0.36” height single digit display. It utilizes GaAsP/
GaP Red, Orange, Yellow, Green and AlGaAs/GaAs Red
chips. This device is halogenated.
All devices are categorized for luminous intensity. The
orange, yellow and green devices are categorized for
color. Use of similar device categories will yield a uniform
display.
Features
x High reliability
x Excellent characters appearance
x Available in CA and CC
x RoHS Compliant
x Gray top surface with white diused segments.
Ordering Information
Red Green Yellow Orange AlGaAs Red Description
HDSP-C3E1 HDSP-C3G1 HDSP-C3Y1 HDSP-C3L1 HDSP-C3A1 Common Anode, Right Hand Decimal
HDSP-C3E3 HDSP-C3G3 HDSP-C3Y3 HDSP-C3L3 HDSP-C3A3 Common Cathode, Right Hand Decimal
Package Dimensions
Notes:
1. All dimensions are in millimeter.
2. Unless otherwise stated, the tolerance is ± 0.25mm.
2
Circuit Diagram
Absolute Maximum Ratings at TA = 25°C
Parameter Symbol
Red/Yellow/
Orange Green AlGaAs Red Units
Power Dissipation per segment or Dot Point (DP) PD57.5 62.5 50 mW
Continuous Forward Current per segment IF25 25 25 mA
Peak Forward Current per segment
(1/10 Duty Cycle, 0.1m sec pulse width)
80 80 80 mA
Derating Linearly from 25°C per segment 0.33 0.33 0.33 mA/°C
Reverse Voltage per segment or DP VR5V
Operating Temperature TO-40 to 85 °C
Storage Temperature TS-40 to 85 °C
Wave solder Condition 1.6mm below body 260°C peak for 5 secs max
3
Electrical / Optical Characteristic at TA = 25°C
Red
Parameter Symbol Min Typ Max Units Test Conditions
Average Luminous Intensity (Digit Average) Iv– 1.1 – mcd IF = 10mA
Peak Wavelength Op– 640 – nm IF = 20mA
Dominant Wavelength Od– 626 – nm IF = 20mA
Forward Voltage per segment or DP VF– 2.0 2.3 V IF = 20mA
Reverse Current IR– – 100 PAVR = 5V
Luminous Intensity Matching Ratio
(Segment to Segment)
Iv–M 2:1 IF = 10mA
Green
Parameter Symbol Min Typ Max Units Test Conditions
Average Luminous Intensity (Digit Average) Iv– 1.9 – mcd IF = 10mA
Peak Wavelength Op– 565 – nm IF = 20mA
Dominant Wavelength Od– 569 – nm IF = 20mA
Forward Voltage per segment or DP VF– 2.25 2.5 V IF = 20mA
Reverse Current IR– – 100 PAVR = 5V
Luminous Intensity Matching Ratio
(Segment to Segment)
Iv–M 2:1 IF = 10mA
Yellow
Parameter Symbol Min Typ Max Units Test Conditions
Average Luminous Intensity (Digit Average) Iv– 0.75 – mcd IF = 10mA
Peak Wavelength Op– 587 – nm IF = 20mA
Dominant Wavelength Od– 589 – nm IF = 20mA
Forward Voltage per segment or DP VF– 2.15 2.3 V IF = 20mA
Reverse Current IR– – 100 PAVR = 5V
Luminous Intensity Matching Ratio
(Segment to Segment)
Iv–M 2:1 IF = 10mA
4
Orange
Parameter Symbol Min Typ Max Units Test Conditions
Average Luminous Intensity (Digit Average) Iv– 0.9 – mcd IF = 10mA
Peak Wavelength Op– 610 – nm IF = 20mA
Dominant Wavelength Od– 605 – nm IF = 20mA
Forward Voltage per segment or DP VF– 2.15 2.3 V IF = 20mA
Reverse Current IR– – 100 PAVR = 5V
Luminous Intensity Matching Ratio
(Segment to Segment)
Iv–M 2:1 IF = 10mA
AlGaAs Red
Parameter Symbol Min Typ Max Units Test Conditions
Average Luminous Intensity (Digit Average) Iv– 7.5 – mcd IF = 10mA
Peak Wavelength Op– 660 – nm IF = 20mA
Dominant Wavelength Od– 643 – nm IF = 20mA
Forward Voltage per segment or DP VF– 1.85 2.0 V IF = 20mA
Reverse Current IR– – 100 PAVR = 5V
Luminous Intensity Matching Ratio
(Segment to Segment)
Iv–M 2:1 IF = 10mA
5
Red
Figure 1. Relative Luminous Intensity Vs Forward Current Figure 2. Forward Voltage Vs Current
Figure 3. Relative Luminous Intensity Vs Wavelength
0
0.5
1
1.5
2
2.5
0 5 10 15 20 25 30
DC FORWARD CURRENT - mA
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 10 mA)
0
5
10
15
20
25
30
0 0.5 1 1.5 2 2.5 3
FORWARD VOLTAGE - V
FORWARD CURRENT - mA
0
0.2
0.4
0.6
0.8
1
380 430 480 530 580 630 680 730 780
WAVELENGTH - nm
RELATIVE INTENSITY
6
Green
Figure 4. Relative Luminous Intensity Vs Forward Current Figure 5. Forward Voltage Vs Current
Figure 6. Relative Luminous Intensity Vs Wavelength
-0.5
0
0.5
1
1.5
2
2.5
3
0 5 10 15 20 25 30
DC FORWARD CURRENT - mA
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 10mA)
0
5
10
15
20
25
30
0 0.5 1 1.5 2 2.5 3
FORWARD VOLTAGE - V
FORWARD CURRENT - mA
0.0
0.2
0.4
0.6
0.8
1.0
380 430 480 530 580 630 680 730 780
WAVELENGTH - nm
RELATIVE INTENSITY
7
Yellow
Figure 7. Relative Luminous Intensity Vs Forward Current Figure 8. Forward Voltage Vs Current
Figure 9. Relative Luminous Intensity Vs Wavelength
0
0.5
1
1.5
2
2.5
3
3.5
0 5 10 15 20 25 30
DC FORWARD CURRENT - mA
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 10mA)
0
5
10
15
20
25
30
0 0.5 1 1.5 2 2.5 3
FORWARD VOLTAGE - V
FORWARD CURRENT - mA
0
0.2
0.4
0.6
0.8
1
380 430 480 530 580 630 680 730 780
WAVELENGTH - nm
RELATIVE INTENSITY
8
Orange
Figure 10. Relative Luminous Intensity Vs Forward Current Figure 11. Forward Voltage Vs Current
Figure 12. Relative Luminous Intensity Vs Wavelength
0
0.5
1
1.5
2
2.5
3
0 5 10 15 20 25 30
DC FORWARD CURRENT - mA
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 10mA)
0
5
10
15
20
25
30
0 0.5 1 1.5 2 2.5 3
FORWARD VOLTAGE - V
FORWARD CURRENT - mA
0
0.2
0.4
0.6
0.8
1
380 430 480 530 580 630 680 730 780
WAVELENGTH - nm
RELATIVE INTENSITY
9
AlGaAs Red
Figure 13. Relative Luminous Intensity Vs Forward Current Figure 14. Forward Voltage Vs Current
Figure 15. Relative Luminous Intensity Vs Wavelength
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 10mA)
0
5
10
15
20
25
30
0 0.5 1 1.5 2 2.5 3
FORWARD VOLTAGE - V
FORWARD CURRENT - mA
0
0.2
0.4
0.6
0.8
1
380 430 480 530 580 630 680 730 780
WAVELENGTH - nm
RELATIVE INTENSITY
0
0.5
1
1.5
2
2.5
0 5 10 15 20 25 30
DC FORWARD CURRENT - mA
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved.
AV02-2492EN - April 4, 2011
Packing Tube Specications:
Tube Front View Tube Top View
Reference
For further information on soldering LEDs, please refer to Avago Technologies Application Note 1027.