Data sheet TERMOPTO TOS 5VDC/48VDC 0,1A Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Similar to illustration TERMOPTO solid-state-relay 5 to 48 V DC 0.1 A output version, with AC or DC input, available in different versions: * With screw connection * In 6.1 mm width * With various input protection circuits (free-wheel diode, varistor) * Pluggable cross-connections * Enclosed design General ordering data Type Order No. Version GTIN (EAN) Qty. TOS 5VDC/48VDC 0,1A 8950700000 TERMOPTO, solid-state relais, 1 NO contact (Transistor), Rated control voltage: 5 V DC 20 % , Rated switching voltage: 5...48 V DC, Continuous current: 100 mA, Screw connection 4032248742073 10 pc(s). Creation date December 19, 2018 4:09:00 AM CET Catalogue status 07.12.2018 / We reserve the right to make technical changes. 1 Data sheet TERMOPTO TOS 5VDC/48VDC 0,1A Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width Height Depth Net weight 6.1 mm 74.4 mm 55 mm 20.3 g Width (inches) Height (inches) Depth (inches) 5-95% rel. humidity, Tu = 40C, no condensation -20 C -40 C -40 C...80 C Operating temperature, max. 0.24 inch 2.929 inch 2.165 inch Temperatures Humidity Operating temperature, min. Storage temperature, min. Storage temperature Storage temperature, max. Operating temperature 60 C 80 C -20 C...60 C Probability of failure MTTF 2,500 Years Environmental Product Compliance REACH SVHC Lead 7439-92-1 Control side Rated control voltage Power rating Status indicator 5 V DC 20 % < 40 mW Nominal control current Cut-in / dropout voltage Protective circuit 7.7 mA DC 4 V / 1.25 V DC Varistor, Reverse polarity protection Continuous current Load category Switch-off delay Leakage current Short-circuit-proof max. switching frequency (DC control voltage) 100 mA DC1 < 42 s < 10 A No TS 35 V-0 Colour Black 300 V Pollution severity Clearance and creepage distances for control side - load side Impulse withstand voltage 2 Green LED Load side Rated switching voltage Rated switching current Switch-on delay Voltage drop at max. load Min. switching current Protective circuit, load side 5...48 V DC 100 mA < 13 s <1V 100 A Free-wheel diode 3,000 Hz Contact data Contact type 1 NO contact (Transistor) General data Mounting rail UL 94 flammability rating Insulation coordination Rated voltage Surge voltage category III Dielectric strength for control side - load 1.2 kVeff / 1 min. side Protection degree IP20 > 3 mm 4 kV (1.2/50 s) Creation date December 19, 2018 4:09:00 AM CET Catalogue status 07.12.2018 / We reserve the right to make technical changes. 2 Data sheet TERMOPTO TOS 5VDC/48VDC 0,1A Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Further details of approvals / standards Standards DIN EN 50178, IEC 62314, UL508 Certificate no. (cULus) Screw connection 0.4 Nm 2.5 mm Stripping length, rated connection Tightening torque, max. Clamping range, min. Wire connection cross section AWG, min. Wire cross-section, solid, min. 9 mm 0.6 Nm 0.5 mm ETIM 4.0 ETIM 6.0 eClass 6.2 eClass 8.1 eClass 9.1 EC001504 EC001504 27-27-09-90 27-27-09-90 27-37-16-04 E223474 Connection data Wire connection method Tightening torque, min. Clamping range, rated connection Clamping range, max. Wire connection cross section AWG, max. Wire cross-section, solid, max. 4 mm AWG 12 4 mm Wire connection cross section, finely stranded, max. 2.5 mm Wire cross-section, finely stranded, max. (AWG) AWG 12 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 1.5 mm Conductor cross-section, flexible, AEH (DIN 46228-1), max. 1.5 mm AWG 20 0.5 mm Wire connection cross-section, finely stranded, min. 0.5 mm Wire cross-section, finely stranded, min. (AWG) AWG 20 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 0.5 mm Conductor cross-section, flexible, AEH (DIN 46228-1), min. 0.5 mm Blade size 0.6 x 3.5 mm Classifications ETIM 3.0 ETIM 5.0 eClass 5.1 eClass 7.1 eClass 9.0 EC001504 EC001504 27-27-09-90 27-27-09-90 27-27-09-90 Product information Descriptive text technical data Accessories and dimensioned drawings: refer to the TERMOPTO Accessories page. Approvals Approvals ROHS Conform Downloads Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation DE_PA_5600_160301_001.pdf CAT 4.2 ELECTR 18/19 EN EPLAN, WSCAD STEP Operating Instructions Creation date December 19, 2018 4:09:00 AM CET Catalogue status 07.12.2018 / We reserve the right to make technical changes. 3 Data sheet TERMOPTO TOS 5VDC/48VDC 0,1A Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Wiring diagram Dimensional drawing Schaltsymbol Creation date December 19, 2018 4:09:00 AM CET Catalogue status 07.12.2018 / We reserve the right to make technical changes. 4 Data sheet TERMOPTO TOS 5VDC/48VDC 0,1A Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Miscellaneous Type codes Creation date December 19, 2018 4:09:00 AM CET Catalogue status 07.12.2018 / We reserve the right to make technical changes. 5