REV. 6/3/05 2 { DATE REV ECN APPD. BY 1/24/06 | BS | 7448 M 850 [21.59] MAX. > 206-09 | 86 | 8652 TA | .635 [16.13] MAX. UU 3 }o| | 5 g Ps, + STEWART 2 eS LH PATENTED 8 C =, 7L_Ik | g | | A < T _! _- tas} | 40 [1.02] - : NOTES: | 1. CONNECTOR MATERIALS: I HOUSING: THERMOPLASTIC UL94 V-0 = = 2 CONTACTS/SHIELD: COPPER ALLOY s SHIELD PLATING: NICKEL OR TIN a CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA 3 SEE CHART FOR PART NUMBER Z LU 2. FOR PRODUCT SPECIFICATIONS SEE PRO22-01. @ 100 [2.54] (3) zr 3. DIMENSIONS AND TOLERANCES COMPLY WITH FCC/CFR 47, PART 68. A y 080 [1.27] (7) B 4, THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE 080 [1.27] = USER THE ABILITY TO HAVE REASONABLE JACK /PANEL | 8 CLEARANCES, YET MAINTAIN GROUNDING CAPABILITY. that IU) 2 eel = -_ [1.73]) ={ /( .039 [1.00] ) 9.035 ea TT 89] +,003 [0. 08] (8) mn L Melt _l 0 065 [1.65] +.003 [0.08] Ma 4006 [0.15] 125 [3.18] #108 [3.25] []di006 [0.15] -080 [2.03] 450 [11.43] 610 [15.49] P.C.B. RECOMMENDED HOLE LAYOUT SEEN FROM COMPONENT SIDE 250 135) aor 120 [3.05] at | ALL CENTERLINE DIMENSIONS ARE BASIC. THESE VARIABLES CAN BE ADJUSTED IN EITHER DIRECTION BUT MAY CARRY SOME CONSEQUENCES IN THE FORM OF LOWER MATING FORCES OR TIGHTER ASSEMBLY TOLERANCES. 30 MICRO-INCHES [0.76um] SS6488SANF-K1 CONTACT PLATING IN MATING AREA PART NUMBER THIRD ANGLE PROJECTION @ = Bel Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327-9199 (717) 235-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com DO NOT SCALE DRAWING Oo 2002/95/EC DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE EIGHT CONTACT, EIGHT POSITION, SHIELDED JACK, NON-FLANGED WITH K1 KEYING OPTION DIMENSIONS: INCHES [METRIC] UNLESS OTHERWISE SPECIFIED THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON | PRN BY: SAR DATE 9-11-03 ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF . J TOLERANCES ARE +.005 [0.13] | BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, |MPPPBY Bp | DATE 4 13 ANGLES ARE + 1" COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN SHEET NO. CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT /DWG NO. REV. 1 OF 1 MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING, C1640099 B6 2 1 AutoCAD