PI3A3899 High Speed, Dual DPDT Analog Switch Features Description Applications Block Diagram Pin Configuration COM1 NO1 VCC NC4 UQFN16 1.8mmx2.6mm Package (Top View) 16 15 14 13 NC1 1 12 COM4 A0 2 11 NO4 NO2 3 10 A1 COM2 4 9 NC3 GND 7 8 COM3 6 NO3 5 NC2 C Function Truth Table A0 0 1 Function NC1, 2Connected to COM1, 2 NO1, 2 Connected to COM1, 2 PI3A3899 Document Number DS40939 Rev 1-2 A1 0 1 Function NC3, 4 Connected to COM3, 4 NO3, 4 Connected to COM3, 4 Pin Description Pin# Name 4, 8, 12, 16 COMX 1, 5, 9, 13 NCX 3, 7, 11, 15 NOX 2, 10 A0, A1 6 GND 14 VCC Notes: X = 1, 2, 3, or 4 www.diodes.com 1 Description Common Output / Data Port Data Port (normally connect) Data Port (normally open) Logic Input Control Ground Positive Power Supply April 2018 (c) Diodes Incorporated PI3A3899 Maximum Ratings Note: Storage Temperature ............................................................... -65 to +150 Stresses greater than those listed under MAXIMUM RATINGS may cause permanent Ambient Temperature ............................................................... -40 to +85 damage to the device. This is a stress rating only ESD(HBM) ............................................................................. 4kV for All Pins and functional operation of the device at these or 8kV for I/O to GND any other conditions above those indicated in the Supply Voltage VCC .................................................................. -0.5V to +4.6V operational sections of this specification is not Control Input Voltage (VINX) ........................................................... 0 to +5.0V implied. Exposure to absolute maximum rating DC Input Voltage (VINPUT) ........................................................ -0.5V to +4.6V conditions for extended periods may affect Continuous Current NO/NC/COM ..................................................... 400mA reliability. Peak Current NO/NC/COM (Pulse at 1ms 10% duty cycle) ............... 500mA Recommended Operating Conditions Symbol VCC VINX VINPUT TA Parameter Supply Voltage Control Input Voltage Switch Input Voltage Operating Temperature Conditions Control Input pins Input Rise and Fall Time tr, tf VCC = 2.3V to 3.6V Note: Control input must be held HIGH or LOW; it must not float. PI3A3899 Document Number DS40939 Rev 1-2 www.diodes.com 2 Min. 1.65 0 -0.3 -40 Typ. 25 Max. 4.3 4.3 VCC 85 Unit V V V C 0 - 10 ns/V April 2018 (c) Diodes Incorporated PI3A3899 DC Electrical Characteristics (VCC = 1.65 to 4.3V, GND=0V, VIH=+1.6V, VIL=+0.4V, TA = -40C to 85C, unless otherwise noted. Typical values are at 3V and +25C.) Parameter Symbol Test Conditions Min. Typ. Max. Units VNO, VNC, Analog Signal Range 0 VCC V VCOM VCC = 2.7V, 2.2 3.6 ICOM = 100mA, VNO or V = 3.0V, 2.0 3 On-Resistance RON CC VNC =1V, Test Circuit 1 VCC = 4.3V 1.6 2.4 VCC = 3.0V 0.2 On-Resistance Match ICOM = 100mA, VNO or RON Between Channels VNC =1V, Test Circuit 1 VCC = 4.3V 0.2 ICOM = 100mA, VNO or VCC = 3.0V 0.6 On-Resistance RONF VNC = 0~ VCC, Test Flatness VCC = 4.3V 0.5 Circuit 1 Source Off IOFF (NO) or VCC=4.3V, VNO or VNC = 4.3V/0V, VCOM = 1 Leakage Current IOFF (NC) 0V/4.3V A INC(ON), Channel On Leakage VCC=4.3V, VNO or VNC = 4.3V/0V, VCOM = INO(ON), ICOM 1 Current 0V/4.3V or floating (ON) Input Logic High VIH Input Logic Low VIL IN Input Leakage Current Turn-On Time Turn-Off Time Break-Before-Make Delay NC-NO and COMNC/NO Off-Isolation - 0.5 0.6 V VCC = 4.3V, VIN=0~4.3V - - +/-1 A tON tOFF RL=50, CL=35pF, TA=25C, See Test Circuit Figure 2 - 8 12 - ns ns tD TA=25C, See Test Circuit Figure 3 - 9 - ns - -67 - dB - -100 - dB - 330 - MHz - 0.03 - % - 13 - pC - 7 7 15 - 1 OISO XTALK 3dB Bandwidth Total Harmonic Distortion Charge Injection Select Input to Common I/O f3dB On Capacitance Power Supply Current 1.2 1.3 - IIN Channel-to-Channel Crosstalk Off Capacitance VCC = 3.0V VCC = 4.3V VCC = 3.0V VCC = 4.3V THD Q CNC(OFF) CNO(OFF) CON ICC PI3A3899 Document Number DS40939 Rev 1-2 VBIAS = 1.5V, VIN=0dBm, 1MHz TA=25C, See Test Circuit Figure 4 VBIAS = 1.5V, VIN=0dBm, 1MHz TA=25C, See Test Circuit Figure 5 CL=5pF, See Test Circuit Figure 6 VCC=3.0V, f=20 Hz to 20 kHz, RL =32, VIN= 1.0 VPP VIN = GND, RS = 0, CL = 1nF, TA=25C, See Test Circuit Figure 7 f=1MHz, TA=25C, See Test Circuit Figure 8 f=1MHz, TA=25C, See Test Circuit Figure 9 VCC =4.3V,VIN=0V or VCC www.diodes.com 3 pF A April 2018 (c) Diodes Incorporated PI3A3899 Test Circuits and Timing Diagrams Figure 1. On Resistance Notes: Unused input (NC or NO) must be grounded. VCC Logic Input NO NC Logic Input Figure 2. Switching Times VCC Figure 3. Break Before Make Interval Timing PI3A3899 Document Number DS40939 Rev 1-2 www.diodes.com 4 April 2018 (c) Diodes Incorporated PI3A3899 10nF VCC VCC Figure 4. Off Isolation Test 10nF VCC VCC Figure 5. Channel-to-Channel Cross Talk VCC 10nF VCC Figure 6. Bandwidth PI3A3899 Document Number DS40939 Rev 1-2 www.diodes.com 5 April 2018 (c) Diodes Incorporated PI3A3899 Figure 7. Charge Injection (Q) Figure 8. Channel Off Capacitance Figure 9. Channel On Capacitance Part Marking ZT Package PI3A3899 Document Number DS40939 Rev 1-2 www.diodes.com 6 April 2018 (c) Diodes Incorporated PI3A3899 Package Mechanical UQFN-16 (ZT) Ordering Information Part Number Package Code Package Description PI3A3899ZTEX ZT 16-Pin, 1.8x2.6 (UQFN) Notes: EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. See http://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. Thermal characteristics can be found on the company web site at www.diodes.com/design/support/packaging/ E = Pb-free and Green X suffix = Tape/Reel PI3A3899 Document Number DS40939 Rev 1-2 www.diodes.com 7 April 2018 (c) Diodes Incorporated PI3A3899 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2016, Diodes Incorporated www.diodes.com PI3A3899 Document Number DS40939 Rev 1-2 www.diodes.com 8 April 2018 (c) Diodes Incorporated