S PA 0 2 2W DC-DC Regulated Single Output Converter 1/2 E E E E E E E E E E E E E SPECIFICATION ORDER NO. Features : 2:1 wide input range 4:1 wide input range (Option) 1000VDC I/O isolation 3000VDC I/O isolation (Option) Built-in remote ON/OFF control Built-in EMI filter Protections: Short circuit / Overload Cooling by free air convection Single in line package 100% full load burn-in test Low cost / High reliability Modified models available: output 3.3V/9V 2 years warranty SPA02E-05 SPA02A-05 SPA02B-05 SPA02C-05 SPA02E-12 SPA02A-12 SPA02B-12 SPA02C-12 SPA02E-15 SPA02A-15 SPA02B-15 SPA02C-15 DC VOLTAGE 5V 12V CURRENT RANGE 40 ~ 400mA 15 ~ 150mA 17 ~ 167mA 12 ~ 120mA 13 ~ 133mA RATED POWER 2W 1.8W 1.8W RIPPLE & NOISE (max.) Note.2 60mVp-p LINE REGULATION Note.3 0.5% LOAD REGULATION Note.4 VOLTAGE ACCURACY SWITCHING FREQUENCY INPUT EFFICIENCY (Typ.) 71% 74% C: 36 ~ 72VDC 74% 80% Full load E: 600mA A: 225mA B: 115mA C: 60mA No load A: 25mA C: 8mA E: 50mA B: 15mA 80% 82% 76% Fuse recommended OVERLOAD 150 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 80% 78% All output equipped with short circuit -40 ~ +85 J (Refer to output load derating curve) WORKING HUMIDITY 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +105 , 10 ~ 95% RH 0.05% / (0 ~ 50 ) TEMP. COEFFICIENT O J J J VIBRATION 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes WITHSTAND VOLTAGE I/P-O/P:1KVDC ISOLATION RESISTANCE ISOLATION CAPACITANCE I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH 80pF max. EMC EMISSION EMC IMMUNITY REMOTE CONTROL Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8 light industry level, criteria A Power ON : R.C. ~ +Vin < 1VDC or open ; Power OFF : R.C. ~ +Vin > 4VDC or short MTBF DIMENSION 600Khrs min. MIL-HDBK-217F(25 ) 21.8*9.2*11.1mm or 0.86"*0.36"*0.44" inch (L*W*H) WEIGHT 4.8g 1 2 3 0.5 (0.02) 5 6 7 8 O 0.5 0.05(0.02) 2.54(0.1) 3.81 0.5(0.15) 5.08 (0.2) BOTTOM VIEW 9.2(0.36) 17.78(0.7) 3.2(0.13) 11.1(0.44) O Derating Curve Pin Configuration Unit:mm(inch) 21.8(0.86) FRONT VIEW J J Mechanical Specification Pin No. Output 1 2 3 5 6 7 8 - Vi n + Vi n R.C. N.C. + Vo u t - Vo u t N.C. 100 50 -40 0 25 50 70 85 2.01(0.08) NOTE 80% Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. OTHERS B: 18 ~ 36VDC 76% PROTECTION SHORT CIRCUIT SAFETY A: 9 ~ 18VDC 76% 2W 60mVp-p Pi network PROTECTION ENVIRONMENT O O 0.5% O 2.0% 100KHz min. E: 4.5 ~ 9VDC FILTER (Note. 5) 2W 60mVp-p VOLTAGE RANGE DC CURRENT 15V LOAD (%) OUTPUT series J Ta ( J) 100 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name:SPA02-SPEC 2012-07-18