SPEC NO: DSAG6679 REV NO: V.1 D ATE: JUL/20/2006 P AGE: 1 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP : 1102001724
Part Number: WP59BL/GEW GREEN
HIGH EFFICIENCY RED
Description
The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.
The High Efficiency Red source color devices are made
With Gallium Arsenide Phosphide on Gallium Phosphide
Orange Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
T-1 3/4 (5mm) BI-COLOR RIGHT ANGLE
LED INDICATOR
Features
z PRE-TRIMMED LEADS FOR PC BOARD MOUNTING.
z 3 LEADS WITH COMMON CATHODE LEAD.
z I.C. COMPATIBLE.
z BLACK CASE ENHANCES CONTRAST RATIO.
z WIDE VIEWING ANGLE.
z HIGH RELIABILITY - LIFE MEASURED IN YEARS.
z UL RATING : 94V-0.
z HOUSING MATERIAL: TYPE 66 NYLON.
z RoHS COMPLIANT.
SPEC NO: DSAG6679 REV NO: V.1 D ATE: JUL/20/2006 P AGE: 2 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP : 1102001724
Selection Guide
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2 θ1/2
WP59BL/GEW WHITE DIFFUSED 60°
GREEN (GaP) 18 50
HIGH EFFICIENCY RED (GaAsP/GaP) 18 60
Symbol Parameter Device Typ. Max. Units Test Conditi ons
λpeak Peak Wavelength Green
High Efficiency Red 565
627 nm IF=20mA
λD [1] Dominant Wavelength Green
High Efficiency Red 568
625 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green
High Efficiency Red 30
45 nm IF=20mA
C Capacitance Green
High Efficiency Red 15
15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Green
High Efficiency Red 2.2
2.0 2.5
2.5 V IF=20mA
IR Reverse Current Green
High Efficiency Red 10
10 uA VR = 5V
Parameter Green High Efficiency Red Units
Power dissipation 62.5 75 mW
DC Forward Current 25 30 mA
Peak Forward Current [1] 140 160 mA
Reverse Voltage V
Operating/storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
5
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous flux: +/-15%.
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
SPEC NO: DSAG6679 REV NO: V.1 D ATE: JUL/20/2006 P AGE: 3 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP : 1102001724
Green /High Efficiency Red WP59BL/GEW
SPEC NO: DSAG6679 REV NO: V.1 D ATE: JUL/20/2006 P AGE: 4 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP : 1102001724
PACKING & LABEL SPECIFICATIONS WP59BL/GEW
