MADRCC0004 Quad Driver for GaAs FET Switches and Attenuators Rev. V3 Features High Speed CMOS Technology Complementary Outputs Positive Voltage Control Low Power Dissipation Plastic SOIC Package for SMT Applications Tape and Reel Packaging Available Lead-Free SOIC-16 Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of DR65-0001 Logic Diagram Ax Cx Bx Description M/A-COM's MADRCC0004 is a Quad channel driver used to translate TTL control inputs into gate voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications. Pin Configuration Pin No. Function Pin No. Function 1 A3 9 C2 2 B3 10 C1 3 A4 11 GND Ordering Information Part Number Package 4 B4 12 GND MADRCC0004 Bulk Packaging 5 VEE 13 A1 MADRCC0004TR 1000 piece reel 6 VCC 14 B1 7 C4 15 A2 8 C3 16 B2 Note: Reference Application Note M513 for reel size information. Guaranteed Operating Ranges Symbol Parameter1 Unit Min Typical Max VCC Positive DC Supply Voltage V 4.5 5.0 5.5 VEE Negative DC Supply Voltage V -5.5 -5.0 -4.5 TA Operating Ambient Temperature C -40 +25 +85 IOH DC Output Current - HIGH mA -- -- -1.0 IOL DC Output Current - LOW mA -- -- 1.0 Trise, Tfall Maximum Input Rise or Fall Time nS -- -- 500 1. All voltages are relative to GND. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0004 Quad Driver for GaAs FET Switches and Attenuators Rev. V3 AC & DC Characteristics Over Guaranteed Operating Range Symbol Parameter Test Conditions Units Min Typ Max VIH Input HIGH Voltage Guaranteed HIGH Input Voltage V 2.0 -- - VIL Input LOW Voltage Guaranteed LOW Input Voltage V - -- 0.8 VOH Output HIGH Voltage IOH = -1 mA VEE = Max V - 0.1 -- - VOL Output LOW Voltage IOL = 1 mA VEE = Max V -- -- VEE + 0.1 IIN Input Current VIN = VCC or GND VEE = Min A -10 0 10 ICC Quiescent Supply Current VCC = Max VEE = Min VIN = VCC or GND A -- -- 400 ICC Additional Supply Current, per TTL Input pin VCC = Max VIN = VCC - 2.1V mA -- -- 1.0 TPHL, TPLH Propagation Delay Guaranteed -40 C to + 85 C nS -- -- 50 TTHL, TTLH Output Transition Time Guaranteed -40 C to + 85 C nS -- -- 25 Delay Skew, Output A to Output B Guaranteed -40 C to + 85 C nS -- -- 8 Switching Waveforms INPUT C VIN TF Absolute Maximum Ratings2,3 TR Parameter Absolute Maximum VCC - .5V to + 6.0 V VEE - 6.0 V to - .5 V VCC - VEE 12 V LOGIC 1 90% 1.3 V 10% LOGIC 0 TPLH TPHL OUTPUT A V IN GND 90% 4 VCC + .5 V V OUT VEE - .5 V Storage Temperature -65C to +150C Operating Temperature -40C to +85C VOUT 50% OUTPUT B 10% TTLH TTHL VEE Note: See Switching Wave Forms for the definition of the switching terms. Supplies must be by-passed with .01 F Capacitors. Note: Unused inputs must be tied to Ground Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2. 3. 4. Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. Truth Table Input Outputs CX AX BX 0 VEE GND 1 GND VEE 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0004 Quad Driver for GaAs FET Switches and Attenuators Rev. V3 Lead-Free, SOIC-16 Reference Application Note M538 for lead-free solder reflow recommendations. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MADRCC0004 Quad Driver for GaAs FET Switches and Attenuators Rev. V3 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: MACOM: MADRCC0004 MADRCC0004TR