4MN10CH Ordering number : ENA0268 NPN Epitaxial Planar Silicon Transistor 4MN10CH High-Frequency General-Purpose Amplifier Applications Features * * * High fT : fT=400MHz (typ). High breakdown voltage : VCEO200V. Small reverse transfer capacitance and excellent high-frequnecy characteristic : Cre=1.4pF. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 200 Collector-to-Emitter Voltage VCEO 200 V Emitter-to-Base Voltage VEBO 4 V Collector Current IC ICP PC Collector Current (Pulse) Collector Dissipation Junction Temperature Tj Storage Temperature Tstg 100 V mA 200 mA 600 mW 150 C --55 to +150 C Mounted on a ceramic board (600mm20.8mm) Electrical Characteristics at Ta=25C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current hFE1 hFE2 DC Current Gain Gain-Bandwideth Product Collector-to-Emitter Saturation Voltage fT VCE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Cob Output Capacitance Reverse Transfer Capacitance Cre Conditions VCB=150V, IE=0A VEB=2V, IC=0A VCE=10V, IC=10mA VCE=10V, IC=60mA VCE=30V, IC=30mA IC=30mA, IB=3mA IC=10A, IE=0A IC=1mA, RBE= IE=100A, IC=0A Ratings min typ max 60 Unit 0.1 A 1.0 A 200 20 400 MHz 0.6 V 200 V 200 V 4 VCB=30V, f=1MHz VCB=30V, f=1MHz V 1.8 pF 1.4 pF Marking : GL Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2005AA MS IM TB-00001940 No. A0268-1/3 4MN10CH Package Dimensions unit : mm 7015-003 0.15 0.4 0.2 0.6 3 0.6 1.6 2.8 0.05 1 2 1.9 2.9 0.7 0.9 0.2 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 IC -- VCE 500A 400A 100 350A 300A 30 250A 200A 20 150A 100A 10 IB=0A 0 8 12 16 Collector-to-Emitter Voltage, VCE -- V 40 0 0 0.2 100 7 5 3 2 10 0.6 0.8 1.0 1.2 IT10192 fT -- IC 1000 Gain-Bandwidth Product, f T -- MHz 2 0.4 Base-to-Emitter Voltage, VBE -- V IT10191 VCE=10V DC Current Gain, hFE 60 20 hFE -- IC 3 80 20 50A 4 VCE=10V 450A 40 0 IC -- VBE 120 Collector Current, IC -- mA Collector Current, IC -- mA 50 VCE=30V 7 5 3 2 100 7 5 7 5 5 7 1.0 2 3 5 7 10 2 3 Collector Current, IC -- mA 5 7 100 2 IT10193 3 1.0 2 3 5 7 10 2 3 Collector Current, IC -- mA 5 7 100 IT10194 No. A0268-2/3 4MN10CH Cob -- VCB 2 Cre -- VCB 2 f=1MHz Reverse Transfer Capacitance, Cre -- pF Output Capacitance, Cob -- pF f=1MHz 10 7 5 3 2 1.0 7 5 7 5 3 2 1.0 7 5 5 7 1.0 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB -- V 7 5 100 IT10195 7 1.0 2 3 5 7 2 10 3 5 Collector-to-Base Voltage, VCB -- V VCE(sat) -- IC 2 7 100 IT10196 PC -- Ta 0.7 IC / IB=10 0.6 Collector Dissipation, PC -- W Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 10 1.0 7 5 3 2 0.1 M ou nt 0.5 ed on ac er 0.4 am ic bo ar 0.3 d( 60 0m m2 0.2 0.8 m m ) 0.1 7 5 5 0 7 1.0 2 3 5 7 10 2 Collector Current, IC -- mA 3 5 7 100 IT10197 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 ITR11804 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2005. Specifications and information herein are subject to change without notice. PS No. A0268-3/3