(c) 2015 Mitutoyo America Corporation Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring Mitutoyo is not only a manufacturer of top-quality measuring products but one that also offers qualified support for the lifetime of the equipment, backed by comprehensive services that ensure your staff can make the very best use of the investment. Sensor Systems Test Equipment and Seismometers Digital Scale and DRO Systems Small Tool Instruments and Date Management Apart from the basics of calibration and repair, Mitutoyo offers product and metrology training, as well as IT support for the sophisticated software used in modern measuring technology. We can also design, build, test and deliver bespoke measuring solutions and even, if deemed cost-effective, take your critical measurement challenges in-house on a sub-contract basis. DIGIMATIC INDICATORS ID-C Series For Calculation, Peak-Value Hold and Bore Gage Applications SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT Whatever your challenges are, Mitutoyo supports you from start to finish. Find additional product literature and our product catalog www.mitutoyo.com Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive. Specifications are subject to change without notice. Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may require prior approval by an appropriate governing authority. Trademarks and Registrations Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate companies should be contacted for more complete trademark and registration information. Mitutoyo America Corporation www.mitutoyo.com One Number to Serve You Better 1-888-MITUTOYO (1-888-648-8869) M3 Solution Centers: Aurora, Illinois (Headquarters) Boston, Massachusetts Huntersville, North Carolina Mason, Ohio Plymouth, Michigan City of Industry, California Birmingham, Alabama Renton, Washington Houston, Texas 1.5M 0315-02 * Printed in USA * May 2015 Bulletin No. 2179 Digimatic Indicators SPECIFICATIONS Max Min Ax'+B+Cx'-1 Digimatic Indicators Bore For Peak-Value Hold Applications FEATURES * Peak-Value TIR/MAX/MIN Hold enables GO/NG judgment for peak value. * Simple operation of many functions using five buttons and status icons. * Wide LCD and new analog bar graph are now standard on all models. Performs sampling at 50 times per second and detects peak value more correctly. Max Min Digimatic Indicators For Bore Gage Applications Ax'+B+Cx'-1 Bore FEATURES * Dedicated for inside measurement with minimum value hold and tolerance judgment function. * Measurement data memory function (9 measurement results can be stored) * Simple operation of many functions using five buttons and status icons. * Wide LCD and new analog bar graph are now standard on all models. * Performs sampling at 50 times per second and detects peak value more correctly. Max Min Ax'+B+Cx'-1 Bore 543-341B o8mm 543-342B .5" = 12.7 mm .00010" / 0.003 mm .00010" / 0.002 mm .00010" / 0.002 mm o9.52mm=.375"(3/8") DIA Functions * Calculation function operates on spindle displacement. * Entering the appropriate formula factors for a fixture dedicated to the application enables direct measurement readout, thereby eliminating the need for conversion tables previously needed for those applications where fixtures are typically used. * Peak-Value TIR/MAX/MIN Hold enables GO/NG judgment for peak value. * Simple operation of many functions using five buttons and status icons. * Wide LCD and new analog bar graph are now standard on all models. * Performs sampling at 50 times per second and detects peak value more correctly. 543-340B 12.7 mm 0.003 mm 0.002 mm 0.002 mm Calculation 543-591B 543-592B 1" = 25.4 mm .00010" / 0.003 mm .00010" / 0.002 mm .00010" / 0.002 mm o8mm o9.52mm=.375"(3/8") DIA 330 12 steps 20 scales Three Preset values (P1, P2 and P3) can be set and stored. Four sets of upper and lower limits (P1, P2, P3 and INC) can be set and stored. TIR, Max, Min Displayed value = Ax'+B+Cx'-1 (x' = plunger displacement + offset) Display value HOLD Digimatic Yes Yes Yes Capacitance-type absolute-linear-encoder infinite 543-590B 25.4 mm 0.003 mm 0.002 mm 0.002 mm 543-595B 50.8 mm 0.006 mm 0.002 mm 0.002 mm 543-596B o8mm 543-597B 2" = 50.8 mm .00025" / 0.006 mm .00010" / 0.002 mm .00010" / 0.002 mm o9.52mm=.375"(3/8") DIA 10 times/sec 50 times/sec CR2032 x 1 pc. Approx. 1 year Flat 170 g 190 g 260 g *1 Does not include quantizing error (1 count). Valid for resolution set to 0.001mm/'.00005" and coefficients A=1, B=0 and C=0. *2 When data processors are not connected. Battery life depends on use of the indicator. Use the above value as a guide only. (TIP) Battery life with Peak detection mode and FAST mode ON is about 10 months. SPECIFICATIONS Type/Model Order No. Measuring range Magnification and linearity (overall) *1 Hysteresis *1 Repeatability *1 Stem diameter Display rotate Resolution Analog bar display Preset Tolerance judgment Peak detection Calculation Others Data output Input from PC (Dedicated I/F) Key lock (set from instrument or PC) Parameter lock (set from PC) Detection method Response speed Normal mode Measurement Peak detection FAST mode OFF frequency mode FAST mode ON Power supply 2 Battery life (normal use) * Type of back Net weight 543-300 12.7 mm 0.003 mm 0.002 mm 0.002 mm 0.001/0.01 mm Functions FEATURES Type/Model Order No. Measuring range Magnification and linearity (overall) *1 Hysteresis *1 Repeatability *1 Stem diameter Display rotate Resolution (selectable) Analog bar display Preset Tolerance judgment Peak detection Calculation Others Data output Input from PC (Dedicated I/F) Key lock (set from instrument or PC) Parameter lock (set from PC) Detection method Response speed Normal mode Measurement Peak detection FAST mode OFF frequency mode FAST mode ON Power supply 2 Battery life (normal use) * Type of back Net weight 543-300B 543-301 o8mm Peak-value hold 543-301B .5" = 12.7 mm .00010" / 0.003 mm .00010" / 0.002 mm .00010" / 0.002 mm 543-302 330 543-302B o9.52mm=.375"(3/8") DIA .00005/.0001/.0005" // 0.001/0.01 mm 20 scales Three Preset values (P1, P2 and P3) can be set and stored. Four sets of upper and lower limits (P1, P2, P3 and INC) can be set and stored. TIR, Max, Min Ax Display value HOLD Digimatic Yes Yes Yes Capacitance-type absolute-linear-encoder infinite 10 times/sec 50 times/sec CR2032 x 1 pc. Approx. 1 year With lug Flat With lug Flat With lug Flat 180 g 170 g 180 g 170 g 195 g 170 g *1 Does not include quantizing error (1 count). Valid for resolution set to 0.001mm/'.00005" and coefficient A=1. *2 When data processors are not connected. Battery life depends on use of the indicator. Use the above value as a guide only. (TIP) Battery life with Peak detection mode and FAST mode ON is about 4.5 months. SPECIFICATIONS Type/Model Order No. Measuring range Magnification and linearity (overall) *1 Hysteresis *1 Repeatability *1 Stem diameter Display rotate Resolution Analog bar display Preset Tolerance judgment Peak detection Calculation Others Data output Input from PC (Dedicated I/F) Key lock (set from instrument or PC) Parameter lock (set from PC) Detection method Response speed Normal mode Measurement Peak detection FAST mode OFF frequency mode FAST mode ON Power supply 2 Battery life (normal use) * Type of back Net weight Functions For Calculation Applications 543-310B 12.7 mm 0.003 mm 0.002 mm 0.002 mm 0.001/0.01 mm Bore gage 543-311B o8mm 330 .5" = 12.7 mm .00010" / 0.003 mm .00010" / 0.002 mm .00010" / 0.002 mm 543-312B o9.52mm=.375"(3/8") DIA .00005/.0001/.0005" // 0.001/0.01 mm 20 scales Three Preset values (P1, P2 and P3) can be set and stored. Three sets of upper and lower limits (P1, P2 and P3) can be set and stored. Min -- Measurement data memory (9 measurement results can be stored), Display value HOLD Digimatic Yes Yes Yes Capacitance-type absolute-linear-encoder infinite 10 times/sec 50 times/sec CR2032 x 1 pc. Approx. 1 year Flat 170 g *1 Does not include quantizing error (1 count). Valid for resolution set to 0.001mm/'.00005". *2 When data processors are not connected. Battery life depends on use of the indicator. Use the above value as a guide only. (TIP) Battery life with Peak detection mode and FAST mode ON is about 4.5 months. 2 3 Digimatic Indicators SPECIFICATIONS Max Min Ax'+B+Cx'-1 Digimatic Indicators Bore For Peak-Value Hold Applications FEATURES * Peak-Value TIR/MAX/MIN Hold enables GO/NG judgment for peak value. * Simple operation of many functions using five buttons and status icons. * Wide LCD and new analog bar graph are now standard on all models. Performs sampling at 50 times per second and detects peak value more correctly. Max Min Digimatic Indicators For Bore Gage Applications Ax'+B+Cx'-1 Bore FEATURES * Dedicated for inside measurement with minimum value hold and tolerance judgment function. * Measurement data memory function (9 measurement results can be stored) * Simple operation of many functions using five buttons and status icons. * Wide LCD and new analog bar graph are now standard on all models. * Performs sampling at 50 times per second and detects peak value more correctly. Max Min Ax'+B+Cx'-1 Bore 543-341B o8mm 543-342B .5" = 12.7 mm .00010" / 0.003 mm .00010" / 0.002 mm .00010" / 0.002 mm o9.52mm=.375"(3/8") DIA Functions * Calculation function operates on spindle displacement. * Entering the appropriate formula factors for a fixture dedicated to the application enables direct measurement readout, thereby eliminating the need for conversion tables previously needed for those applications where fixtures are typically used. * Peak-Value TIR/MAX/MIN Hold enables GO/NG judgment for peak value. * Simple operation of many functions using five buttons and status icons. * Wide LCD and new analog bar graph are now standard on all models. * Performs sampling at 50 times per second and detects peak value more correctly. 543-340B 12.7 mm 0.003 mm 0.002 mm 0.002 mm Calculation 543-591B 543-592B 1" = 25.4 mm .00010" / 0.003 mm .00010" / 0.002 mm .00010" / 0.002 mm o8mm o9.52mm=.375"(3/8") DIA 330 12 steps 20 scales Three Preset values (P1, P2 and P3) can be set and stored. Four sets of upper and lower limits (P1, P2, P3 and INC) can be set and stored. TIR, Max, Min Displayed value = Ax'+B+Cx'-1 (x' = plunger displacement + offset) Display value HOLD Digimatic Yes Yes Yes Capacitance-type absolute-linear-encoder infinite 543-590B 25.4 mm 0.003 mm 0.002 mm 0.002 mm 543-595B 50.8 mm 0.006 mm 0.002 mm 0.002 mm 543-596B o8mm 543-597B 2" = 50.8 mm .00025" / 0.006 mm .00010" / 0.002 mm .00010" / 0.002 mm o9.52mm=.375"(3/8") DIA 10 times/sec 50 times/sec CR2032 x 1 pc. Approx. 1 year Flat 170 g 190 g 260 g *1 Does not include quantizing error (1 count). Valid for resolution set to 0.001mm/'.00005" and coefficients A=1, B=0 and C=0. *2 When data processors are not connected. Battery life depends on use of the indicator. Use the above value as a guide only. (TIP) Battery life with Peak detection mode and FAST mode ON is about 10 months. SPECIFICATIONS Type/Model Order No. Measuring range Magnification and linearity (overall) *1 Hysteresis *1 Repeatability *1 Stem diameter Display rotate Resolution Analog bar display Preset Tolerance judgment Peak detection Calculation Others Data output Input from PC (Dedicated I/F) Key lock (set from instrument or PC) Parameter lock (set from PC) Detection method Response speed Normal mode Measurement Peak detection FAST mode OFF frequency mode FAST mode ON Power supply 2 Battery life (normal use) * Type of back Net weight 543-300 12.7 mm 0.003 mm 0.002 mm 0.002 mm 0.001/0.01 mm Functions FEATURES Type/Model Order No. Measuring range Magnification and linearity (overall) *1 Hysteresis *1 Repeatability *1 Stem diameter Display rotate Resolution (selectable) Analog bar display Preset Tolerance judgment Peak detection Calculation Others Data output Input from PC (Dedicated I/F) Key lock (set from instrument or PC) Parameter lock (set from PC) Detection method Response speed Normal mode Measurement Peak detection FAST mode OFF frequency mode FAST mode ON Power supply 2 Battery life (normal use) * Type of back Net weight 543-300B 543-301 o8mm Peak-value hold 543-301B .5" = 12.7 mm .00010" / 0.003 mm .00010" / 0.002 mm .00010" / 0.002 mm 543-302 330 543-302B o9.52mm=.375"(3/8") DIA .00005/.0001/.0005" // 0.001/0.01 mm 20 scales Three Preset values (P1, P2 and P3) can be set and stored. Four sets of upper and lower limits (P1, P2, P3 and INC) can be set and stored. TIR, Max, Min Ax Display value HOLD Digimatic Yes Yes Yes Capacitance-type absolute-linear-encoder infinite 10 times/sec 50 times/sec CR2032 x 1 pc. Approx. 1 year With lug Flat With lug Flat With lug Flat 180 g 170 g 180 g 170 g 195 g 170 g *1 Does not include quantizing error (1 count). Valid for resolution set to 0.001mm/'.00005" and coefficient A=1. *2 When data processors are not connected. Battery life depends on use of the indicator. Use the above value as a guide only. (TIP) Battery life with Peak detection mode and FAST mode ON is about 4.5 months. SPECIFICATIONS Type/Model Order No. Measuring range Magnification and linearity (overall) *1 Hysteresis *1 Repeatability *1 Stem diameter Display rotate Resolution Analog bar display Preset Tolerance judgment Peak detection Calculation Others Data output Input from PC (Dedicated I/F) Key lock (set from instrument or PC) Parameter lock (set from PC) Detection method Response speed Normal mode Measurement Peak detection FAST mode OFF frequency mode FAST mode ON Power supply 2 Battery life (normal use) * Type of back Net weight Functions For Calculation Applications 543-310B 12.7 mm 0.003 mm 0.002 mm 0.002 mm 0.001/0.01 mm Bore gage 543-311B o8mm 330 .5" = 12.7 mm .00010" / 0.003 mm .00010" / 0.002 mm .00010" / 0.002 mm 543-312B o9.52mm=.375"(3/8") DIA .00005/.0001/.0005" // 0.001/0.01 mm 20 scales Three Preset values (P1, P2 and P3) can be set and stored. Three sets of upper and lower limits (P1, P2 and P3) can be set and stored. Min -- Measurement data memory (9 measurement results can be stored), Display value HOLD Digimatic Yes Yes Yes Capacitance-type absolute-linear-encoder infinite 10 times/sec 50 times/sec CR2032 x 1 pc. Approx. 1 year Flat 170 g *1 Does not include quantizing error (1 count). Valid for resolution set to 0.001mm/'.00005". *2 When data processors are not connected. Battery life depends on use of the indicator. Use the above value as a guide only. (TIP) Battery life with Peak detection mode and FAST mode ON is about 4.5 months. 2 3 (c) 2015 Mitutoyo America Corporation Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring Mitutoyo is not only a manufacturer of top-quality measuring products but one that also offers qualified support for the lifetime of the equipment, backed by comprehensive services that ensure your staff can make the very best use of the investment. Sensor Systems Test Equipment and Seismometers Digital Scale and DRO Systems Small Tool Instruments and Date Management Apart from the basics of calibration and repair, Mitutoyo offers product and metrology training, as well as IT support for the sophisticated software used in modern measuring technology. We can also design, build, test and deliver bespoke measuring solutions and even, if deemed cost-effective, take your critical measurement challenges in-house on a sub-contract basis. DIGIMATIC INDICATORS ID-C Series For Calculation, Peak-Value Hold and Bore Gage Applications SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT Whatever your challenges are, Mitutoyo supports you from start to finish. Find additional product literature and our product catalog www.mitutoyo.com Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive. Specifications are subject to change without notice. Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may require prior approval by an appropriate governing authority. Trademarks and Registrations Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate companies should be contacted for more complete trademark and registration information. Mitutoyo America Corporation www.mitutoyo.com One Number to Serve You Better 1-888-MITUTOYO (1-888-648-8869) M3 Solution Centers: Aurora, Illinois (Headquarters) Boston, Massachusetts Huntersville, North Carolina Mason, Ohio Plymouth, Michigan City of Industry, California Birmingham, Alabama Renton, Washington Houston, Texas 1.5M 0315-02 * Printed in USA * May 2015 Bulletin No. 2179