R07DS0110EJ0300 Rev.3.00 Page 1 of 7
Sep 13, 2010
Preliminary Datasheet
BCR16PM-12LA
Triac
Medium Power Use
Features
IT (RMS) : 16 A
VDRM : 600 V
IFGTI, IRGTI, IRGT III : 30 mA (20 mA)Note5
Viso : 2000 V
Insulated Type
Planar Passivation Type
UL Recognized : Yellow Card No. E223904
Outline
2
13
2
13
1. T
1
Terminal
2. T
2
Terminal
3. Gate Terminal
RENESAS Package code:
PRSS0003AA-A
(Package name:
TO-220F)
Applications
Contactless AC switch, light dimmer, electronic flasher unit, hair drier, control of household equipment such as TV sets,
refrigerator, washing machine, electric fan, and other general controlling devices
Maximum Ratings
Voltage class
Parameter Symbol
12 Unit
Repetitive peak off-state voltageNote1 V
DRM 600 V
Non-repetitive peak off-state voltageNote1 V
DSM 720 V
R07DS0110EJ0300
(Previous: REJ03G0306-0200)
Rev.3.00
Sep 13, 2010
BCR16PM-12LA Preliminary
R07DS0110EJ0300 Rev.3.00 Page 2 of 7
Sep 13, 2010
Parameter Symbol Ratings Unit Conditions
RMS on-state current IT (RMS) 16 A
Commercial frequency, sine full wave
360° conduction, Tc = 71C
Surge on-state current ITSM 160 A
60Hz sinewave 1 full cycle, peak value,
non-repetitive
I2t for fusing I2t 106.5 A2s Value corresponding to 1 cycl e of half
wave 60Hz, surge on-state current
Peak gate power dissipation PGM 5.0 W
Average gate power dissipation PG (AV) 0.5 W
Peak gate voltage VGM 10 V
Peak gate current IGM 2 A
Junction temperature Tj – 40 to +125 C
Storage temperature Tstg – 40 to +125 C
Mass — 2.0 g Typical value
Isolation voltage Viso 2000 V Ta = 25C, AC 1 minute,
T1·T2·G terminal to case
Notes: 1. Gate open.
Electrical Characteristics
Parameter Symbol Min. Typ. Max. Unit Test conditions
Repetitive peak off-state current IDRM — — 2.0 mA Tj = 125C, VDRM applied
On-state voltage VTM — — 1.5 V
Tc = 25C, ITM = 25 A,
Instantaneous measurement
V
FGT — — 1.5 V
V
RGT — — 1.5 V
Gate trigger voltageNote2
V
RGT — — 1.5 V
Tj = 25C, VD = 6 V, RL = 6 ,
RG = 330
I
FGT — — 30Note5 mA
I
RGT — — 30Note5 mA
Gate trigger currentNote2
I
RGT — — 30Note5 mA
Tj = 25C, VD = 6 V, RL = 6 ,
RG = 330
Gate non-trigger voltage VGD 0.2 — — V Tj = 125C, VD = 1/2 VDRM
Thermal resistance Rth (j-c) — — 3.0 C/W Junction to caseNote3
Critical-rate of rise of off-state
commutating voltageNote4 (dv/dt)c 10 — — V/s Tj = 125C
Notes: 2. Measurement using the gate trigger characteristics measurement circuit.
3. The contact thermal resistance Rth (c-f) in case of greasing is 0.5°C/W.
4. Test conditions of the critical-rate of rise of off-state commutating voltage is sho wn in the table bel ow.
5. High sensitivity (IGT 20mA) is also available. (IGT item: 1)
Test conditions Commutating voltage and current waveforms
(inductive load)
1. Junction temperature
Tj = 125C
2. Rate of decay of on-state commutating current
(di/dt)c = – 8.0 A/ms
3. Peak off-state voltage
VD = 400 V
Supply Voltage
Time
Time
Time
Main Current
Main Voltage
(di/dt)c
V
D
(dv/dt)c
BCR16PM-12LA Preliminary
R07DS0110EJ0300 Rev.3.00 Page 3 of 7
Sep 13, 2010
Performance Curves
Maximum On-State Characteristics
On-State Voltage (V)
On-State Current (A)
Rated Surge On-State Current
Conduction Time (Cycles at 60Hz)
Surge On-State Current (A)
Gate Characteristics (I, II and III)
Gate Current (mA)
Gate Voltage (V)
Gate Trigger Voltage vs.
Junction Temperature
Junction Temperature (°C)
Gate Trigger Voltage (Tj = t°C)
Gate Trigger Voltage (Tj = 25°C)
×
100 (%)
Gate Trigger Current vs.
Junction Temperature
Junction Temperature (°C)
Gate Trigger Current (Tj = t°C)
Gate Trigger Current (Tj = 25°C)
× 100 (%)
Maximum Transient Thermal Impedance
Characteristics (Junction to case)
Conduction Time (Cycles at 60Hz)
Transient Thermal Impedance (°C/W)
10
0
2510
1
80
40
3710
2
425374
120
160
200
60
20
100
140
180
0
4.40.4 1.22.4 3.20.8 1.6 2.02.8 3.6 4.0
10
3
7
5
3
2
10
2
7
5
3
2
10
1
7
5
3
2
10
0
100
231015710223 5710323 57104
3
2
101
7
5
3
2
7
5
7
5
3
2
10–1
2310–15710023 5710123 57102
3.5
4.0
4.5
3.0
2.5
2.0
1.5
1.0
0.5
5.0
0
231025710323
101
103
7
5
3
2
–60–20 20
102
7
5
3
2
60100
140
4
4
–400 4080120
101
103
7
5
3
2
–60–20 20
102
7
5
3
2
60100
140
4
4
–400 4080120
Tj = 25°C
Tj = 125°C
VGM = 10VPG(AV) = 0.5W
PGM = 5W
IGM = 2A
VGT = 1.5V
Typical Example
IRGT III
IFGT I, IRGT I
IFGT I, IRGT I, IRGT III VGD = 0.2V
Typical Example
BCR16PM-12LA Preliminary
R07DS0110EJ0300 Rev.3.00 Page 4 of 7
Sep 13, 2010
Maximum Transient Thermal Impedance
Characteristics (Junction to ambient)
Transient Thermal Impedance (°C/W)
Conduction Time (Cycles at 60Hz)
On-State Power Dissipation (W)
RMS On-State Current (A)
Maximum On-State Power Dissipation
RMS On-State Current (A)
Case Temperature (°C)
Allowable Case Temperature vs.
RMS On-State Current
RMS On-State Current (A)
Allowable Ambient Temperature vs.
RMS On-State Current
Ambient Temperature (°C)
RMS On-State Current (A)
Ambient Temperature (°C)
Allowable Ambient Temperature vs.
RMS On-State Current
Junction Temperature (°C)
Repetitive Peak Off-State Current (Tj = t°C)
Repetitive Peak Off-State Current (Tj = 25°C)× 100 (%)
Repetitive Peak Off-State Current vs.
Junction Temperature
10
3
10
–1
10
3
10
4
10
2
7
5
3
2
10
0
7
5
3
2
10
1
7
5
3
2
7
5
3
2
10
1
23 57 23 57
10
2
10
5
23 57 23 57
40
30
15
10
5
35
25
20
020
0248610 12 141618
14040–40–60–20 0 20 6080100120
10
5
7
5
3
2
10
4
7
5
3
2
10
3
7
5
3
2
10
2
160
120
100
60
20
0201618
0 2 610 14
40
80
140
48
12
160
120
100
60
20
020181602 610 14
40
80
140
4812
160
120
100
60
20
04.0
00.5 1.5 2.5 3.5
40
80
140
1.02.0 3.0
No Fins
Curves apply regardless
of conduction angle
360° Conduction
Resistive,
inductive loads
All fins are black painted
aluminum and greased
Natural convection
120 × 120 × t2.3
100 × 100 × t2.3
60 × 60 × t2.3
Typical Example
360° Conduction
Resistive,
inductive loads
Natural convection
No Fins
Curves apply regardless
of conduction angle
Resistive, inductive loads
BCR16PM-12LA Preliminary
R07DS0110EJ0300 Rev.3.00 Page 5 of 7
Sep 13, 2010
Holding Current vs.
Junction Temperature
Junction Temperature (°C)
Holding Current (Tj = t°C)
Holding Current (Tj = 25°C)× 100 (%)
Latching Current (mA)
Latching Current vs.
Junction Temperature
Junction Temperature (°C)
Rate of Rise of Off-State Voltage (V/μs)
Breakover Voltage (dv/dt = xV/μs)
Breakover Voltage (dv/dt = 1V/μs)× 100 (%)
Breakover Voltage vs.
Rate of Rise of Off-State Voltage
Breakover Voltage vs.
Junction Temperature
Junction Temperature (°C)
Breakover Voltage (Tj = t°C)
Breakover Voltage (Tj = 25°C)× 100 (%)
Commutation Characteristics
Critical Rate of Rise of Off-State
Commutating Voltage (V/μs)
Rate of Decay of On-State
Commutating Current (A/ms)
Gate Trigger Current (tw)
Gate Trigger Current (DC)× 100 (%)
Gate Current Pulse Width (μs)
Gate Trigger Current vs.
Gate Current Pulse Width
10
3
7
5
3
2
–60–20 20
10
2
7
5
3
2
60 100 140
4
4
–400 4080120
10
1
160–400 4080120
10
3
7
5
3
2
10
2
7
5
3
2
10
1
7
5
3
2
10
0
10
1
10
3
7
5
3
2
10
0
23 5710
1
10
2
7
5
3
2
23 5710
2
4
4
44
160
100
80
40
20
014040–40–60–20 0 20 6080
140
100120
60
120
2310
1
5710
2
23 5710
3
23 5710
4
120
0
20
40
60
80
100
140
160
10
1
2310
0
5710
1
23 5710
2
23
7
5
5
3
2
7
7
3
2
10
0
Typical Example
Typical Example
Distribution T
2
+, G–
Typical Example
T
2
+, G+
T
2
–, G–Typical Example
Typical Example
Tj = 125°C
III Quadrant
I Quadrant
Main Voltage
Main CurrentI
T
(di/dt)c
τ
V
D
Time
Time
(dv/dt)c
Typical Example
Tj = 125°C
I
T
= 4A
τ = 500μs
V
D
= 200V
f = 3Hz
Minimum
Characteristics
Value
I Quadrant
III Quadrant
Typical Example
IRGT III
IRGT I
IFGT I
BCR16PM-12LA Preliminary
R07DS0110EJ0300 Rev.3.00 Page 6 of 7
Sep 13, 2010
Test Procedure I
Test Procedure III
Test Procedure II
Gate Trigger Characteristics Test Circuits
6Ω6Ω
6Ω
6V 6V
6V
A
V
A
V
A
V
330Ω330Ω
330Ω
BCR16PM-12LA Preliminary
R07DS0110EJ0300 Rev.3.00 Page 7 of 7
Sep 13, 2010
Package Dimensions
SC-67 2.0g
MASS[Typ.]
⎯PRSS0003AA-A
RENESAS CodeJEITA Package Code Previous Code
Unit: mm
Package Name
TO-220F
5.2
10.5Max
5.0
17
3.6
13.5Min
8.51.2
0.8
2.542.540.52.6
4.5
2.8
1.3Max
φ3.2±0.2
Order Code
Lead form Standard packin g Quantity Standard order code Standard order
code example
Straight type Vinyl sack 100 Type name BCR16PM-12LA
Lead form Plastic Magazine (Tube) 50 Type name – Lead forming code BCR16PM-12LA-A8
Note : Please confirm the specification about the shipping in detail.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas
Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to
be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and
regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to
the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is
prohibited under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product
depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas
Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the
use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics.
The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools;
personal electronic equipment; and industrial robots.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically
designed for life support.
"Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical
implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or system manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A.
Tel: +1-408-588-6000, Fax: +1-408-588-6130
Renesas Electronics Canada Limited
1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada
Tel: +1-905-898-5441, Fax: +1-905-898-3220
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-65030, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China
Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2886-9318, Fax: +852 2886-9022/9044
Renesas Electronics Taiwan Co., Ltd.
7F, No. 363 Fu Shing North Road Taipei, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632
Tel: +65-6213-0200, Fax: +65-6278-8001
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics Korea Co., Ltd.
11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
SALES OFFICES
© 2010 Renesas Electronics Corporation. All rights reserved.
Colophon 1.0
