Continental Device India Limited
An IS/ISO 9002 and IECQ Certified Manufacturer
NPN SILICON PLANAR TRANSISTOR 2N2484
TO-18
This transistors is primarily intended for use in high performance, low level,
l
ow no
i
se amp
lifi
er app
li
cat
i
ons
ABSOLUTE MAXIMUM RATINGS
DESCRIPTION SYMBOL VALUE UNIT
Collector -Emitter Voltage VCEO 60 V
Collector -Base Voltage VCBO 60 V
Emitter -Base Voltage VEBO 6.0 V
Collector Current Continuous IC 50 mA
Power Dissipation @Ta=25 degC PD 360 mW
Derate Above 25 deg C 2.06 mw/deg C
Power Dissipation @Tc=25 degC PD 1.20 W
Derate Above 25 deg C 6.85 mw/deg C
Operating And Storage Junction Tj, Tstg -65 to +200 deg C
Temperature Range
THERMAL RESISTANCE
Junction to Case Rth(j-c) 146 deg C/W
Junction to Ambient in Free Air Rth(j-a) * 485 deg C/W
Lead Temperature TL 300 deg C
1/16" from Case for 10 Seconds
ELECTRICAL CHARACTERISTICS (Ta=25 deg C Unless Otherwise Specified)
DESCRIPTION SYMBOL TEST CONDITION Min MAX UNIT
Collector -Emitter Voltage VCEO** IC=10mA,IB=0 60 - V
Collector -Base Voltage VCBO IC=10uA.IE=0 60 - V
Emitter -Base Voltage VEBO IE=10uA, IC=-0 6.0 - V
Collector-Cut off Current ICBO VCB=45V, IE=0 - 10 nA
Ta=150 deg C
VCB=45V, IE=0 - 10 uA
Emitter-Cut off Current IEBO VEB=5V, IC=0 - 10 nA
Collector Emitter Saturation Voltage VCE(Sat) IC=1mA,IB=0.1mA - 0.35 V
Base Emitter on Voltage VBE(on) IC=0.1mA, VCE=5V 0.5 0.7 V
IS/ISO 90 02
Lic# QSC/L- 000019.2
IS / IECQC 700000
IS / IECQC 750100
Continental Device India Limited Data Sheet Page 1 of 3
Boca Semiconductor Corp
BSC
http://www.bocasemi.com page : 1
ELECTRICAL CHARACTERISTICS (Ta=25 deg C Unless Otherwise Specified) 2N2484
DESCRIPTION SYMBOL TEST CONDITION MIN MAX UNIT
DC Current Gain hFE IC=1uA, VCE=5V 30 -
IC=10uA, VCE=5V 100 500
Ta=55 deg C
IC=10uA, VCE=5V 20 -
IC=100uA, VCE=5V 175 -
IC=500uA, VCE=5V 200 -
IC=1mA, VCE=5V 250 -
IC=10mA,VCE=5V** - 800
Dynamic Characteristics
Transition Frequency ft VCE=5V,IC=0.05mA 15 - MHz
f=5MHz
VCE=5V,IC=0.5mA, 60 - MHz
f=30MHz
Out-put Capacitance Cobo VCB=5V, IE=0 - 6.0 pF
f=140kHz
In-put Capacitance Cibo VEB=0.5V, IC=0 - 6.0 pF
f=140kHz
Noise Figure NF VCE=5V, IC=10uA
Rs=10kohms
f=100Hz, BW'=20Hz - 10 dB
f=1kHz, BW=200Hz - 3.0 dB
f=10kHz, BW=2kHz - 2.0 dB
f=10Hz to 15.7kHz,BW=15.7KHz 3.0 dB
Small Signal Characteristics (@ f=1kHz unless otherwise specified)
Input Impedence hie IC=1mA, VCE=5V 3.5 24 kohms
-4
Voltage Feedback Ratio hre IC=1mA, VCE=5V - 800 x10
Small Signal Current Gain hfe IC=1mA, VCE=5V 150 900
Output Admittance hoe IC=1mA, VCE=5V - 40 umhos
*Rth(j-a) is measured with the device soldered into a typical printed Circuit board.
**Pulse Test: Pulse Width=300us, Duty Cycle=2%
Continental Device India Limited Data Sheet Page 2 of 3
http://www.bocasemi.com page : 2
TO-18 Metal Can Package
Disclaimer
TO-18 1K/polybag 350 gm/1K pcs 3" x 7.5" x 7.5" 5.0K 17" x 15" x 13.5" 80.0K 34 kgs
PACKAGE
Net Weight/Qty
Details
STANDARD PACK INNER CARTON BOX
Qty
OUTER CARTON BOX
Qty Gr WtSize Size
Packing Detail
G
1
2
3
H
J
L
F
A
D
B
E
C
K
DIM MIN MAX
All diminsions in mm.
A 5.24 5.84
B 4.52 4.97
C 4.31 5.33
D 0.40 0.53
E—0.76
F—1.27
G—2.97
H 0.91 1.17
J 0.71 1.21
K12.70
L45 DEG
PIN CONFIGURATION
1. EMITTER
2. BASE
3. COLLECTOR
1
2
3
The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited
for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as
to confirm that the Device(s) meet functionality parameters for your application. The information furnished on the CDIL Web
Site/CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete
information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product;
neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life
saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor
Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own
risk and CDIL will not be responsible for any damages resulting from such sale(s).
CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice.
CDIL is a registered Trademark of
Continental Device India Limited
C-120 Naraina Industrial Area, New Delhi 110 028, India.
Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290
e-mail sales@cdil.com www.cdil.com
Continental Device India Limited Data Sheet Page 3 of 3
http://www.bocasemi.com page : 3