CUBEFuse Compact Circuit Protector Base (CCPB) For Quik-SpecTM Coordination Panelboards Specifications: * CCPB Ampacity rejection breaks: 15A, 20A, 30A, 40A, 50A, 60A, 70A, 90A and 100A. * 1-, 2- and 3-Pole versions * For systems 600Vac (or less) * Box lug loadside terminal: 15 - 60A: - 18-6AWG (1-16mm2) single & dual rated, solid or stranded - 75C, Cu only - 4AWG (21.1mm2) single - 75C, Cu only The revolutionary Cooper Bussmann CCPB with CUBEFuse is designed as a fused branch circuit disconnect with fuse holder for the Cooper Bussmann Quik-SpecTM Coordination Panelboard. The CCPB with CUBEFuse simplifies selective coordination and allows for isolation of individual branch circuit loads for safe work practices. 100A: - 18-1AWG (1-45mm2) single or dual rated, solid or stranded - 75C or higher - Cu only - 6AWG (16mm2) single - 75C or higher - Cu only * Box lug loadside terminal torque: 15-60A: - 18-10AWG 20 Lb-In (1-6mm2/2.2N*m) Product Features and Benefits - 8-4AWG 35 Lb-In (10-21.1mm2/3.9N*m) * Uses finger-safe Class CF Low-Peak CUBEFuse with current-limiting, time-delay or fast-acting Class J performance* 100A: - 18-10AWG 25 Lb-In (1-6mm2/2.82N*m * High Short-Circuit Current Ratings at 200kA - 8-1AWG 40 LB-In (10-45mm2/4.52N*m) * Disconnect rated to provide means for load isolation - 6AWG 45Lb-In (16mm2/5.08N*m) * Spade terminal load connection: Max. 30A suitable for use with #8-32UNC screw * Full voltage rated at 600Vac * 125Vdc rated for 80A and below * UL 98 Listed and suitable for branch circuit disconnect and branch circuit protection * 1-, 2- and 3-pole versions are horsepower rated * Patented rejection feature helps prevent overfusing * Complies with UL and cULus * Additional open fuse indication can be provided by using the time-delay indicating CUBEFuse version * Built-in switch/fuse interlock prohibits removing the fuse while energized * Permanent lockout/tagout provisions * Lock-On provision *See data sheet 9000 for CUBEFuse specifications. **For fuse performance under or above 25C, consult fuse performance derating charts. BU-SB10881 * Lockout/tagout: 4mm shank lock * Bolt-mounted design into Quik-Spec Coordination Panelboard bus * Local indication: illumination requires closed circuit and minimum 90Vac operating voltage * Open fuse indication light per pole 0312 * Bolt-on style bus connector, #10-32-UNC Hex flange Phillips screw, torque to 25 Lb-In (2.8N*m) Form No.CCPB * RoHS compliant Agency Information: UL 98 Listed, File E302370, Guide WHTY cULus to CSA Standard 22.2 No. 4, File E302370, Guide WHTY7 CE Compliant Shipping Weight: 2.03 lbs per carton Carton quantity: 6 poles Environmental Data Storage and operating temperature: -20C to 75C** Page 1 of 4 Data Sheet 1161 Bolt-on style bus connector Symbols for ON and OFF Lockout/tagout provision Local, neon open fuse indication light Disconnect handle CUBEFuse base Box lug loadside terminal 0312 BU-SB10881 Spade terminal connection Form No.CCPB Page 2 of 4 Data Sheet 1161 Technical Ratings CUBEFuse (Class J performance) CCPB Part Numbers CCPB-1-15CF CCPB-2-15CF Poles Voltage Rating 1 2 CCPB-3-15CF 3 CCPB-1-20CF CCPB-2-20CF 1 2 CCPB-3-20CF 3 CCPB-1-30CF CCPB-2-30CF 1 2 CCPB-3-30CF 3 CCPB-1-40CF CCPB-2-40CF 1 2 CCPB-3-40CF 3 CCPB-1-50CF CCPB-2-50CF 1 2 CCPB-3-50CF 3 CCPB-1-60CF CCPB-2-60CF 1 2 CCPB-3-60CF 3 CCPB-1-70CF CCPB-2-70CF 1 2 CCPB-3-70CF CCPB-1-90CF CCPB-2-90CF 3 1 2 CCPB-3-90CF CCPB-1-100CF CCPB-2-100CF 3 1 2 CCPB-3-100CF 3 Time-Delay Non-Indicating Time-Delay Indicating* Fast-Acting Non-Indicating Max. Fuse** Ampacity 600Vac TCF1RN, TCF3RN, TCF6RN, TCF10RN, TCF15RN TCF6, TCF10, TCF15 FCF1RN, FCF3RN, FCF6RN, FCF10RN, FCF15RN 15A 200kA 600Vac TCF17-1/2RN, TCF20RN TCF17-1/2, TCF20 FCF20RN 20A 200kA 600Vac TCF25RN, TCF30RN TCF25, TCF30 FCF25RN, FCF30RN 30A 200kA 600Vac TCF35RN, TCF40RN TCF35, TCF40 FCF35RN, FCF40RN 40A 200kA 600Vac TCF45RN, TCF50RN TCF45, TCF50 FCF45RN, FCF50RN 50A 200kA 600Vac TCF60RN TCF60 FCF60RN 60A 200kA 600Vac TCF70RN TCF70 FCF70RN 70A 200kA 600Vac TCF90RN TCF90 FCF80RN, FCF90RN 90A 200kA 600Vac TCF100RN TCF100 FCF100RN 100A 200kA *1A and 3A indicating CUBEFuse not available. Correct fit with CCPB disconnect requires indicating CUBEFuse with date code R38 or later. **Any fuse with an amp rating less than or equal to the max fuse rating may be used.Example: TCF15 may be used with CCPB-1-20CF. ***Do not use UPS/Critical Application fast-acting CF with motors. 0312 SCCR BU-SB10881 Form No.CCPB Page 3 of 4 Data Sheet 1161 Hp Ratings*** 0.5Hp@120V 1.5Hp@240V 3Hp@240V 5Hp@480V 7.5Hp@600V 0.75Hp@120V 2Hp@240V 3Hp@240V 7.5Hp@480V 10Hp@600V 1.5Hp@120V 3Hp@240V 5Hp@240V 15Hp@480V 10Hp@600V 2.0Hp@120V 3Hp@240V 7.5Hp@240V 20Hp@480V 10Hp@600V 3.0Hp@120V 5Hp@240V 7.5Hp@240V 20Hp@480V 10Hp@600V 3.0Hp@120V 7.5Hp@240V 7.5Hp@240V 20Hp@480V 10Hp@600V 3.0Hp@120V 7.5Hp@240V 15Hp@240V 30Hp@480V 5.0Hp@120V 10Hp@240V 20Hp@240V 40Hp@480V 5.0Hp@120V 10Hp@240V 20Hp@240V 50Hp@480V CUBEFuse Motor Sizing Table Voltage 115Vac, 1-Phase 230Vac, 1-Phase 200Vac, 3-Phase 208Vac, 3-Phase Motor Size (Hp) 0.167 0.25 0.333 0.5 0.75 1 1.5 2 3 5** 0.167 0.25 0.333 0.5 0.75 1 1.5 2 3 5 7.5 10** 0.5 0.75 1 1.5 2 3 5 7.5 20** 0.5 0.75 1 1.5 2 3 5 7.5 20** Motor* FLA (Amps) 4.4 5.8 7.2 9.8 13.8 16 20 24 34 56 2.2 2.9 3.6 4.9 6.9 8 10 12 17 28 40 50 2.5 3.7 4.8 6.9 7.8 11 17.5 25.3 62.1 2.4 3.5 4.6 6.6 7.5 10.6 16.7 24.2 59.4 Low-Peak CUBEFuse (Amp Rating) Optimal Code Heavy Protection Max Start 10 10 10 10 15 15 15 15 15 15 20 20 25 25 30 25 30 35 30 35 45 40 45 50 50 60 N/A 90 100 N/A 6 6 6 6 6 6 6 10 10 10 10 10 15 15 15 15 15 17.5 15 20 20 20 25 25 25 30 35 45 50 60 60 N/A N/A 80 90 N/A 6 6 6 6 10 10 10 10 10 15 15 15 15 15 17.5 17.5 20 20 30 35 35 40 45 50 100 N/A N/A 6 6 6 6 10 10 10 10 10 10 15 15 15 15 15 17.5 20 20 25 30 35 40 45 50 90 N/A N/A Voltage 230Vac, 3-Phase 460Vac, 3-Phase 575Vac, 3-Phase Motor Size (Hp) 0.5 0.75 1 1.5 2 3 5 7.5 20** 0.5 0.75 1 1.5 2 3 5 7.5 10 15 20 50** 0.5 0.75 1 1.5 2 3 5 7.5 10 50** Motor1 FLA (Amps) 2.2 3.2 4.2 6 6.8 9.6 15.2 22 54 1.1 1.6 2.1 3 3.4 4.8 7.6 11 14 21 27 65 0.9 1.3 1.7 2.4 2.7 3.9 6.1 9 11 52 Low-Peak CUBEFuse (Amp Rating) Optimal Code Heavy Protection Max Start 6 6 6 6 6 6 10 10 10 10 15 15 15 15 15 15 20 20 25 30 30 35 40 45 90 100 N/A 3 3 3 3 3 3 6 6 6 6 6 6 6 6 6 10 10 10 15 15 15 17.5 20 20 25 25 30 35 40 45 40 50 60 100 N/A N/A 3 3 3 3 3 3 3 3 3 6 6 6 6 6 6 6 10 10 10 15 15 15 20 20 17.5 20 20 80 100 N/A Note: Use Code Max column for low to moderate reverse/jog/plug applications. Heavy Start permitted only if Code Max does not allow motor start-up. *Based on motor FLA from NEC(R) tables 430.248 and 430.250. **Max. Hp rating for the CCPB 100 Amp device at specified voltage. Dimensional Data -- in (mm) 3.9 (99.4) 1.0 (25.4) 2.0 (50.7) 2.7 (69.1) 2.9 (73.5) 3.0 (75.8) O.5 (12.9) O.2 (5.8) 39 For details on the CCPB and its use in the Quik-SpecTM Coordination Panelboard, see data sheet 1160. The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. (c) 2012 Cooper Bussmann www.cooperbussmann.com 0312 BU-SB10881 Form No.CCPB Page 4 of 4 Data Sheet 1161 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cooper Bussmann: CCPB-1-40CF CCPB-2-15CF CCPB-2-20CF CCPB-2-50CF CCPB-3-20CF CCPB-3-50CF CCPB-1-50CF CCPB3-60CF CCPB-2-60CF CCPB-3-30CF CCPB-1-15CF CCPB-1-30CF CCPB-2-30CF CCPB-3-40CF CCPB-1-20CF CCPB-3-15CF CCPB-2-40CF CCPB-1-60CF