2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL 215-781-9956 • FAX 215-781-9845
WWW.ARIESELEC.COM • INFO@ARIESELEC.COM
11006
Rev. 8.4
1 of 2
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
FEATURES
• Wide Array of DIP Jumper Configurations and Wiring Possibilities
• Reliable, Electronically-tested Solder Connections
• Protective Covers Ultrasonically-welded with Strain Relief
• Easy Identification and Tracing with 10-color Cable
GENERAL SPECIFICATIONS
• HEADER BODY AND COVER: black UL 94V-0 4/6 Nylon
• HEADER PINS: Brass 1/2-hard
• STANDARD PIN PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min.
Ni per QQ-N-290
• OPTIONAL PLATING: 200µ [5.08µ] min. matte Sn per ASTM B545-97(2004)e1 over 50µ
[1.27mm] min. Ni per QQ-N-290; –OR– 200µ [5.08µ] 90/10 Sn/Pb per MIL-T-10727 Type I
over 50µ [1.27µ] min. Ni per QQ-N-290
• CABLE INSULATION: UL style 2697 Polyvinyl Chloride (PVC)
• CABLE LAMINATE: clear PVC, self-extinguishing*
• 0.050 [1.27] PITCH CONDUCTORS: 28-AWG, 7/36-strand, tinned Cu per ASTM B 33
• 0.039 [0.99] PITCH CONDUCTORS: 26-AWG, 7/34-strand)
• CABLE CURRENT RATING: 1 amp at 10°C [50°F] above ambient
• CABLE VOLTAGE RATING: 300V
• CABLE TEMPERATURE RATING: 176°F [80°C]
• CABLE CAPACITANCE: 13.0pF/ft. [42.7pF/meter] nominal at 1MHz*
• CROSSTALK: 10-ft sample, 5ns rise time with 2 lines driven; near end 4.7%; far end
4.3% nominal*
• PROPAGATION DELAY: 1.5ns/ft. [4.9ns/meter] nominal*
• INSULATION RESISTANCE: 1010Ω (10 ft. [3 meters] min.)
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.033 ±0.002 [0.86 ±0.05] dia.
* Applies to 0.050 [1.27] Pitch Cable Only
Series 100 thru 111
DIP Jumpers
ORDERING INFORMATION
XX-XXXX-XXX XXX
Optional Header Pin Plating
T = Sn
TL = Sn/Pb
ST = Stripped, Sn-dipped
(106-111 Series)
STL = Stripped & Sn/Pb
dipped ends
( Series 106-111)
Jumper Series
Cable Length (inches)
2" = .002 (min.) [50.88]
2.5" = 002.5
No. of Conductors
(see Table)
Available Sizes Centers “C” Dim. “D”
4 thru 20 0.300 [7.62] 0.395 [10.03]
22 0.400 [10.16] 0.495 [12.57]
24, 28, 40 0.600 [15.24] 0.695 [17.65]
NUMBER OF CONDUCTORS
Series 106, 108, 110 Series 107, 109, 111
Wire
Number
Header Pin
Number
Wire
Number
Header Pin
Number
1111
2822
3233
4744
5355
6666
7477
8588
SINGLE-END DIP JUMPER WIRE LIST
2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL 215-781-9956 • FAX 215-781-9845
WWW.ARIESELEC.COM • INFO@ARIESELEC.COM
11006
Rev. 8.4
2 of 2
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
Series 100 thru 111
DIP Jumpers
