DCSD-100B-24 - Wall Industries, Inc.

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833

603-778-2300 www.wallindustries.com Fax 603-778-9797

DCSD-100 Series

100 Watt

Single Output

Chassis Mount DC/DC Converte

FEATURES

● 105°C Output Capacitor

● Low Cost, High Reliability

● Compact Size, Light Weight

● 100% Full Load Burn-In Tested

● Built-In EMI Filter, Low Ripple Noise

● High Efficiency, Low Working Temperature

● Short Circuit, Overload, and Over Voltage Protected

SPECIFICATIONS: DCSD-100 Series

All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.

We reserve the right to change specifications based on technological advances.

INPUT SPECIFICATIONS

Input Voltage

DCSD-100B: 19 ~ 36VDC

DCSD-100C: 36 ~ 72VDC

DCSD-100D: 72 ~ 144VDC or 85~132VAC

AC Current

5V outputs: 6A at 24VDC

12V outputs: 3A at 48VDC

24V outputs: 1.5A at 96VDC

Inrush Current DCSD-100D: 20A at 96VDC

Leakage Current DCSD-100D: < 0.75mA at 120VAC

OUTPUT SPECIFICATIONS

Output Voltage See Table

Output Voltage Tolerance (See Note 3) 5V outputs: ±2%

12V & 24V outputs: ±1%

Voltage Adjustability See Table

Output Current See Table

Line Regulation

5V outputs: ±0.5%

12V outputs: ±0.3%

24V outputs: ±0.2%

Load Regulation

5V outputs: ±0.5%

12V outputs: ±0.3%

24V outputs: ±0.2%

Ripple & Noise See Table

Output Power See Table

Setup, Rise, Hold Up Time DCSD-100D (only): 2s, 50ms, 20ms

PROTECTION

Over Voltage Protection

5V outputs: 5.75 ~ 6.75V / 10% Load

12V outputs: 16.8 ~ 20V / 10% Load

24V outputs: 31.5 ~ 37.5V / 10% Load

Over Load Protection 105%~135% Type: Foldback Current Limiting Reset: Auto recovery.

GENERAL SPECIFICATIONS

Efficiency See Table

Withstand Voltage 1.5KVAC (input to output), 1.5KVAC (input to FG), 0.5KVAC (output to FG)

Isolation Resistance 500VDC / 100MΩ (input to output, input to FG, output to FG)

ENVIRONMENTAL SPECIFICATIONS

Working Temperature -10°C to +60°C (refer to output derating curve)

Storage Temperature -20°C to +85°C

Working Humidity 20% to 90% RH

Storage Humidity 10% to 95% RH

Vibration 10~500Hz, 2G 10min./1cycle, Period for 60min. each axes

Temperature Coefficient ±0.03%/°C (0°C~50°C)

PHYSICAL SPECIFICATIONS

Weight 600 grams

Dimensions 199(L) x 98(W) x 38(H) mm

SAFETY & EMC

EMC Standards EN55022 CLASS B (Radiation), EN61000-4-2,3,4,6,8 ENV50204 Verification for DCSD-100B/C

Series only, not including DCSD-100D series.

(for 24V and 48V input types)

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833

603-778-2300 www.wallindustries.com Fax 603-778-9797

DCSD-100 Series

100 Watt

Single Output

Chassis Mount DC/DC Converte

OUTPUT VOLTAGE / CURRENT RATING CHART

Model Input Voltage Output

Voltage

Adjustability

Rated Output

Current

Output

Ripple & Noise

Output

Power Efficiency

DCSD-100B-5 5 VDC 4.5 ~ 5.5VDC 20A 100mVp-p 100W 74%

DCSD-100B-12 12 VDC 11 ~ 16VDC 8.5A 120mVp-p 102W 75%

DCSD-100B-24

24 VDC

(19 ~ 36 VDC) 24 VDC 23 ~ 30VDC 4.2A 150mVp-p 100.8W 76%

DCSD-100C-5 5 VDC 4.5 ~ 5.5VDC 20A 100mVp-p 100W 75%

DCSD-100C-12 12 VDC 11 ~ 16VDC 8.5A 120mVp-p 102W 77%

DCSD-100C-24

48 VDC

(36 ~ 72 VDC) 24 VDC 23 ~ 30VDC 4.2A 150mVp-p 100.8W 80%

DCSD-100D-5 5 VDC 4.5 ~ 5.5VDC 20A 100mVp-p 100W 78%

DCSD-100D-12 12 VDC 11 ~ 16VDC 8.5A 120mVp-p 102W 81%

DCSD-100D-24

96 VDC

(72 ~ 144 VDC) 24 VDC 23 ~ 30VDC 4.2A 150mVp-p 100.8W 83%

NOTES

1. The DCSD-100 Series is designated as DCSD-100x-y where x can be B (19 ~ 36 VDC input voltage),

C (36 ~ 72 VDC input voltage), or D (72 ~ 144 VDC input voltage) and y can be 5, 12, or 24 for output voltage.

2. All parameters are specified at rated input, rated load and 25ºC 70% RH. ambient.

3. Tolerance includes setup tolerance, line regulation, and load regulation.

4. Ripple & noise are measured at 20MHz using a 12" twisted pair terminated with a 0.1uF & 47uF capacitor.

5. Line regulation is measured from low line to high line at rated load.

6. Load regulation is measured from 0% to 100% rated load.

DERATING CURVE STATIC CHARACTERISTICS (DCSD-100D-24)

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833

603-778-2300 www.wallindustries.com Fax 603-778-9797

DCSD-100 Series

100 Watt

Single Output

Chassis Mount DC/DC Converte

MECHANICAL DRAWING

Unit: mm

Terminal Pin No. Assignment DCSD-100B,C DCSD-100D

Pin No. Assignment Pin. No Assignment Pin No. Assignment Pin No. Assignment

1,2 INPUT 4,5 DC OUTPUT (-V) 1 DC INPUT (V+) 1,2 AC/DC INPUT

3 FG 6,7 DC OUTPUT (+V)

2 DC INPUT (V-)