Application Specific Quick Turn ClockTM
For use with Sigma Designs SMP8644/42 and SMP8654/52
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 5/13/09 Page 1
FEATURES
Advanced Low Jitter PLL design
Accepts a 27MHz Fundamental Crystal input
Two LVCMOS Clock Outputs
o27MHz
o60MHz
Single 3.3V ± 10% power supply
Available in 6-pin SOT Green/RoHS compliant
packages
PIN CONFIGURATION
DESCRIPTION
The PL611-01-F93 is a member of PhaseLink’s Quick Turn ClockTM Family. This device has been pre-configured
to supply the clocking needs of products using the Sigma Designs SMP8644 and SMP8654 Secure Media
Processors. The PL611-01-F93 provides two LVCMOS clock outputs from a single 27MHz fundamental crystal
input saving both board space and cost when compared to competing solutions.
BLOCK DIAGRAM
Crystal
Oscillator
XIN
XOUT
PLL 60MOut
27MOut
27MHz
PIN DESCRIPTION
Name SOT-23 Type Description
27MOut 1 O 27MHz LVCMOS clock output
GND 2 P GND connection
XIN 3 I 27MHz fundamental crystal input
XOUT 4 O 27MHz fundamental crystal output
60MOut 5 O 60MHz LVCMOS clock output
VDD 6 P 3.3V power supply
Application Specific Quick Turn ClockTM
For use with Sigma Designs SMP8644/42 and SMP8654/52
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 5/13/09 Page 2
ELECTRICAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
PARAMETERS SYMBOL MIN. MAX. UNITS
Supply Voltage Range VDD -0.5 4.6 V
Input Voltage Range VI-0.5 VDD+0.5 V
Output Voltage Range VO-0.5 VDD+0.5 V
Soldering Temperature (Green package) 260 C
Storage Temperature TS-65 150 C
Ambient Operating Temperature* -40 85 C
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the device
and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other conditions above
the operational limits noted in this specification is not implied. *Operating temperature is guaranteed by design. Parts are tested to commercial grade only.
GENERAL ELECTRICAL SPECIFICATIONS
PARAMETERS SYMBOL CONDITIONS MIN. TYP. MAX. UNITS
Supply Current, Dynamic IDD Load=15pF 20 mA
Operating Voltage VDD 2.97 3.63 V
Output Low Voltage VOL IOL = +4mA 0.4 V
Output High Voltage VOH IOH = -4mA VDD – 0.4 V
Output Current IOSD VOL = 0.4V, VOH = 2.4V 10 mA
Settling Time At power-up (VDD > 2.97V) 2 ms
Output Rise Time tr15pF Load, 10/90%VDD 2.5 3.5 ns
Output Fall Time tf15pF Load, 90/10%VDD 2.5 3.5 ns
Duty Cycle At VDD/2 45 50 55 %
CRYSTAL SPECIFICATIONS
PARAMETERS SYMBOL MIN. TYP. MAX. UNITS
Fundamental Crystal Resonator Frequency FXIN 27 MHz
Crystal Loading Rating CL (xtal) 18 pF
Maximum Sustainable Drive Level 500 W
Operating Drive Level 100 W
Crystal Shunt Capacitance C0 6 pF
Effective Series Resistance, Fundamental ESR 30 Ω
Application Specific Quick Turn ClockTM
For use with Sigma Designs SMP8644/42 and SMP8654/52
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 5/13/09 Page 3
PACKAGE DRAWING (GREEN PACKAGE COMPLIANT)
ORDERING INFORMATION (GREEN PACKAGE COMPLIANT)
PhaseLink Corporation, reserves the right to make changes in its products or specifications, or both at any time without notice. The information
furnished by Phaselink is believed to be accurate and reliable. However, PhaseLink makes no guarantee or warranty concerning the accuracy of said
information and shall not be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product.
LIFE SUPPORT POLICY: PhaseLink’s products are not authorized for use as critical components in life support devices or systems without the
express written approval of the President of PhaseLink Corporation.
For part ordering, please contact our Sales Department:
47745 Fremont Blvd., Fremont, CA 94538, USA
Tel: (510) 492-0990 Fax: (510) 492-0991
PART NUMBER
The order number for this device is a combination of the following:
Part number, Package type and Operating temperature range
Part Number
Package Type
T=SOT23-6L Temperature Range
C=Commercial (0°C to 70°C)
Shipping Option
Blank=Tube
R=Tape & Reel
Part / Order Number Marking* Package Option
PL611-01-F93TC-R C1F93
LLL 6-Pin SOT-23 (Tape and Reel)
*Note: LLL represents the production lot number
Recommended Land Pattern (MM)
2.35
1.905
0.915
±0.05
1.473
0.95 0.482
±0.050
3.785
±0.05
EH
D
Pin1 Dot
C
L
A2
A1
eb
A
Min Max
A 1.05 1.45
A1 0.05 0.15
A2 1.00 1.30
b 0.35 0.50
c
D 2.80 3.00
E 1.50 1.70
H 2.60 3.00
L 0.35 0.55
e
Symbol Dimension (MM)
0.127 Typical
0.95 Typical
SOT23-6L
