Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model C5060J5003AHF
Rev D
PRELIMINARY
Ultra Low Profile 0805
3 dB, 90° Hybrid Coupler
Description
The C5060J5003AHF is a low cost, low profile sub-miniature high
performance 3 dB coupler in an easy to use surface mount package. The
C5060J5003AHF is ideal for balanced power and low noise amplifiers, plus signal
distribution and other applications where low insertion loss and tight amplitude and
phase balance are required. The C5060J5003AHF is available on tape and reel for
pick and place high volume manufacturing.
All of the Xinger components are constructed from ceramic filled PTFE composites
which possess excellent electrical and mechanical stability. All parts have been
subjected to rigorous qualification testing and units are 100% RF tested.
Detailed Electrical Specifications: Specifications subject to change without notice.
Features:
4500 – 6000 MHz
0.7 mm Height Profile
Surface Mountable
Tape & Reel
RoHS Compliant
Halogen-Free
Room (25C)
Parameter
Min
Typ
Max
Unit
Frequency
4500
6000
MHz
Port Impedance
50
Ω
Return Loss
20
26
dB
Isolation
22
27
dB
Insertion Loss*
0.2
0.3
dB
Amplitude Balance
0.3
1.0
dB
Phase Balance
2
3.8
Degrees
Power Handling @85C
4
Watts
Operating Temperature
-55
+105
ºC
*Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 Ω nominal impedance.
Outline Drawing
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model C5060J5003AHF
Rev D
Typical Broadband Performance: 10 MHz. to 8000 MHz.
0.01 1.01 2.01 3.01 4.01 5.01 6.01 7.01 8.01
-36
-33
-30
-27
-24
-21
-18
-15
-12
-9
-6
-3
0Return Loss at Input Port (dB)
Freq [GHz]
Return Loss at Input Port (dB)
0.01 1.01 2.01 3.01 4.01 5.01 6.01 7.01 8.01
-3.6
-3.3
-3
-2.7
-2.4
-2.1
-1.8
-1.5
-1.2
-0.9
-0.6
-0.3
0Insertion Loss (dB)
Freq [GHz]
Insertion Loss (dB)
0.01 1.01 2.01 3.01 4.01 5.01 6.01 7.01 8.01
-3
-2.5
-2
-1.5
-1
-0.5
0
0.5
1
1.5
2
2.5
3Amplitude Balance (dB)
Freq [GHz]
Amplitude Balance (dB)
0.01 1.01 2.01 3.01 4.01 5.01 6.01 7.01 8.01
-20
-15
-10
-5
0
5
10
15
20 Phase balance(degree)
Freq [GHz]
Phase balance(degree)
0.01 1.01 2.01 3.01 4.01 5.01 6.01 7.01 8.01
-36
-33
-30
-27
-24
-21
-18
-15
-12
-9
-6
-3
0Isolation (dB)
Freq [GHz]
Isolation (dB)
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model C5060J5003AHF
Rev D
PRELIMINARY
Typical Performance: 4900 MHz. to 6100 MHz.
4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 6.1
-36
-33
-30
-27
-24
-21
-18
-15
-12
-9
-6
-3
0Return Loss at Input Port (dB)
Freq [GHz]
Return Loss at Input Port (dB)
4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 6.1
-3.6
-3.3
-3
-2.7
-2.4
-2.1
-1.8
-1.5
-1.2
-0.9
-0.6
-0.3
0Insertion Loss (dB)
Freq [GHz]
Insertion Loss (dB)
4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 6.1
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
0.6
0.8
1Amplitude Balance (dB)
Freq [GHz]
Amplitude Balance (dB)
4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 6.1
-20
-15
-10
-5
0
5
10
15
20 Phase balance(degree)
Freq [GHz]
Phase balance(degree)
4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 6.1
-36
-33
-30
-27
-24
-21
-18
-15
-12
-9
-6
-3
0Isolation (dB)
Freq [GHz]
Isolation (dB)
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model C5060J5003AHF
Rev D
Definition of Measured Specifications
*100% RF test is performed per spec definition for pin configuration 1 and port 1 (input port) is connected to pin1, port 2 (isolated port) is
connected to pin 3, port 3 (direct port) is connected to pin 4 and port 4 (isolated) is connected to pin 6.
Parameter
Definition
Mathematical Representation
i, j, k, m is denoted as the port index of input, isolated, direct
and coupled port for specific pin configuration shown in the table
Return Loss
The impedance match of the
coupler to a 50 system. Return
Loss is an alternate means to
express VSWR.
10
20log ( )
ii
S
Isolation
The input power divided by the
sum of the power at the two
output ports.
10
20log ji
S
Insertion Loss
The input power divided by the
sum of the power at the two
output ports.
22
10
10log ( )
mi ki
SS
Amplitude
Balance
The difference in power between
the two outputs.
10
20log ( )
ki
mi
S
S
Phase Balance
The difference in phase angle
between the two output ports.
90o
ki mi
SS
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model C5060J5003AHF
Rev D
PRELIMINARY
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from organic PTFE based composites which possess excellent
electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and
ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier.
An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the
transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying
pick and place equipment tolerances.
Mounting Footprint
Dimensions are in Millimeters
Plated thru
holes to
ground
Circuit Pattern
Footprint Pad (s)
Solder Resist
4x Transmission
Line
4x 0.30
6x 0.35
6x 0.33
6x 0.05
0.66
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model C5060J5003AHF
Rev D
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below.
Minimum order quantities are 4000 per reel.
