The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PHOTOCOUPLER
PS8101
1 Mbps HIGH CMR ANALOG OUTPUT TYPE
5-PIN SOP (SO-5) PHOTOCOUPLER
Document No. PN10260EJ06V0DS (6th edition)
Date Published August 2009 NS
−NEPOC Series−
2003, 2009
DESCRIPTION
The PS8101 is an optically coupled isolator containing a GaAlAs LED on the light emitting diode (input side) and a
PIN photodiode and a high-speed amplifier transistor on the output side on one chip.
This is a plastic SOP (Small Out-line Package) type for high density applications.
FEATURES
• High common mode transient immunity (CMH, CML = ±15 kV/
µ
s MIN.)
• Small package (SO-5)
• High supply voltage (VCC = 35 V)
• High isolation voltage (BV = 3 750 Vr.m.s.)
• High-speed response (tPHL = 0.8
µ
s MAX., tPLH = 1.2
µ
s MAX.)
• Ordering number of taping product: PS8101-F3, F4: 2 500 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008902 (Option)
APPLICATIONS
• Computer and peripheral manufactures
• General purpose inverter
• Substitutions for relays and pulse transformers
• Power supply
PIN CONNECTION
(Top View)
1. Anode
2. Cathode
3. GND
4. VO
5. VCC
53
12
4
<R>
<R>
Data Sheet PN10260EJ06V0DS
2
PS8101
PACKAGE DIMENSIONS (UNIT: mm)
1.27
0.4
+0.10
–0.05
0.25 M
0.1±0.1
2.6±0.2
4.4
7.0±0.3
0.5±0.3
0.15
+0.10
–0.05
3.4
+0.3
–0.1
53
12
4
MARKING EXAMPLE
No. 1 pin Mark
Initial of NEC
(Engraved mark)
Rank Code
Year Assembled
(Last 1 Digit)
Week Assembled
N931
8101
N931
N*1
*1 Bar : Pb-Free
Type Number
Assembly Lot No. 1 pin Mark
Initial of NEC
(Engraved mark)
Rank Code
Year Assembled
(Last 1 Digit)
Week Assembled
N931
8101
N931
N*1
*1 Bar : Pb-Free
Type Number
Assembly Lot
SnBi PLATING Ni/Pd/Au PLATING
PHOTOCOUPLER CONSTRUCTION
Parameter PS8101
Air Distance (MIN.) 4.2 mm
Outer Creepage Distance (MIN.) 4.2 mm
Isolation Distance (MIN.) 0.2 mm
<R>
<R>
<R>
Data Sheet PN10260EJ06V0DS 3
PS8101
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification Packing Style Safety Standard
Approval Application Part
Number*1
PS8101 PS8101-A Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS8101
PS8101-F3 PS8101-F3-A (SnBi) Embossed Tape 2 500 pcs/reel (UL, CSA approved)
PS8101-F4 PS8101-F4-A
PS8101-V PS8101-V-A 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2
PS8101-V-F3 PS8101-V-F3-A Embossed Tape 2 500 pcs/reel (VDE0884 Part2)
PS8101-V-F4 PS8101-V-F4-A Approved (Option)
PS8101 PS8101-AX Pb-Free 20 pcs (Tape 20 pcs cut) Standard products
PS8101-F3 PS8101-F3-AX (Ni/Pd/Au) Embossed Tape 2 500 pcs/reel (UL, CSA approved)
PS8101-F4 PS8101-F4-AX
PS8101-V PS8101-V-AX 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2
PS8101-V-F3 PS8101-V-F3-AX Embossed Tape 2 500 pcs/reel (VDE0884 Part2)
PS8101-V-F4 PS8101-V-F4-AX Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode Forward Current IF 25 mA
Reverse Voltage VR 5.0 V
Power Dissipation*1 PD 45 mW
Detector Supply Voltage VCC 35 V
Output Voltage VO 35 V
Output Current IO 8.0 mA
Power Dissipation*2 PC 100 mW
Isolation Voltage*3 BV 3 750 Vr.m.s.
Operating Ambient Temperature TA –55 to +100 °C
Storage Temperature Tstg –55 to +125 °C
*1 Reduced to 0.45 mW/°C at TA = 25°C or more.
*2 Reduced to 1.00 mW/°C at TA = 25°C or more.
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-5 shorted together.
<R>
Data Sheet PN10260EJ06V0DS
4
PS8101
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = 16 mA 1.7 2.2 V
Reverse Current IR VR = 3 V 10
µ
A
Forward Voltage
Temperature Coefficient
∆
VF/
∆
TA IF = 16 mA −2.1 mV/°C
Terminal Capacitance Ct V = 0 V, f = 1 MHz 30 pF
Detector High Level Output Current IOH (1) IF = 0 mA, VCC = VO = 5.5 V 3 500 nA
High Level Output Current IOH (2) IF = 0 mA, VCC = VO = 30 V 100
µ
A
Low Level Output Voltage VOL IF = 16 mA, VCC = 4.5 V, IO = 1.2 mA 0.1 0.4 V
Low Level Supply Current ICCL IF = 16 mA, VO = open, VCC = 30 V 50
µ
A
High Level Supply Current ICCH IF = 0 mA, VO = open, VCC = 30 V 0.01 2
Coupled Current Transfer Ratio*1 CTR IF = 16 mA, VCC = 4.5 V, VO = 0.4 V 15 20 35 %
Isolation Resistance RI-O VI-O = 1 kVDC, RH = 40 to 60% 1011 Ω
Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF
Propagation Delay Time
(H → L)*2 tPHL IF = 16 mA, VCC = 5 V, RL = 2.2 kΩ,
CL = 15 pF 0.5 0.8
µ
s
Propagation Delay Time
(L → H)*2 tPLH 0.6 1.2
Common Mode
Transient Immunity at
High Level Output*3
CMH IF = 0 mA, VCC = 5 V, RL = 4.1 kΩ,
VCM = 1.5 kV 15 kV/
µ
s
Common Mode
Transient Immunity at
Low Level Output*3
CML IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ,
VCM = 1.5 kV −15
*1 CTR rank
K : 20 to 35 (%)
N : 15 to 35 (%)
<R>
<R>
Data Sheet PN10260EJ06V0DS 5
PS8101
*2 Test circuit for propagation delay time
Pulse input
47 Ω
(Pulse width = 100 s,
Duty cycle = 1/10)
µ
R
L
= 2.2 kΩ
V
O
(Monitor)
V
CC
= 5 V
Input
(Monitor)
0.1 F
µ
C
L
= 15 pF
Input
Output
50%
1.5 V
5 V
V
OL
t
PHL
t
PLH
C
L is approximately 15 pF which includes probe and stray wiring capacitance.
*3 Test circuit for common mode transient immunity
IFRL = 4.1 kΩ
VO (Monitor)
VCC = 5 V
0.1 F
µ
VCM
90%
10%
1.5 kV
0 V
5 V
2 V
0.8 V
VOL
VCM
VO
(IF = 0 mA)
VO
(IF = 16 mA)
trtf
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of 0.1
µ
F is used between VCC and GND near device. Also, ensure that the distance between
the leads of the photocoupler and capacitor is no more than 10 mm.
3. Avoid storage at a high temperature and high humidity.
Data Sheet PN10260EJ06V0DS
6
PS8101
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
50
30
20
10
0
40
25 50 75 100
Ambient Temperature T
A
(°C)
Diode Power Dissipation P
D
(mW)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
120
100
60
20
0
80
40
25 50 75 100
Ambient Temperature T
A
(°C)
Detector Power Dissipation P
C
(mW)
DETECTOR POWER DISSIPATION vs.
AMBIENT TEMPERATURE
100
0.01
0.1
10
1
1.4 1.8 2.0 2.41.0 1.2 1.6 2.2
Forward Voltage V
F
(V)
Forward Current I
F
(mA)
FORWARD CURRENT vs.
FORWARD VOLTAGE
T
A
= +100°C
+50°C
+25°C
0°C
–25°C
1 000
1
0.1
100
10
50 100–25 0 25 75
Ambient Temperature T
A
(°C)
High Level Output Current I
OH
(nA)
HIGH LEVEL OUTPUT CURRENT vs.
AMBIENT TEMPERATURE
V
CC
= V
O
= 30 V
V
CC
= V
O
= 5.5 V
I
F
= 0 mA
80
20
0
40
60
70
50
10
30
0.5 5 10 501
Forward Current I
F
(mA)
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
Current Transfer Ratio CTR (
%
)
V
CC
= 4.5 V,
V
O
= 0.4 V 1.6
0.0
1.2
0.4
1.4
1.0
0.8
0.6
0.2
0 50 100–50 –25 25 75
Ambient Temperature T
A
(°C)
Normalized Current Transfer Raio CTR
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
Normalized to 1.0
at T
A
= 25°C, I
F
= 16 mA,
V
CC
= 4.5 V, V
O
= 0.4 V
Remark The graphs indicate nominal characteristics.
Data Sheet PN10260EJ06V0DS 7
PS8101
10
4
0
8
6
2
4 8 18 20162 6 10 12 14
Output Voltage VO (V)
Output Current IO (mA)
OUTPUT CURRENT vs.
OUTPUT VOLTAGE
20 mA
15 mA
10 mA
5 mA
IF = 25 mA
6
5
4
2
0
3
1
12 16 20
4826
10 14 18
Forward Current IF (mA)
Output Voltage VO (V)
OUTPUT VOLTAGE vs.
FORWARD CURRENT
RL = 2.2 kΩ
5.6 kΩ
3.0
0
1.0
2.0
10 15 25
520
Forward Current IF (mA)
PROPAGATION DELAY TIME vs.
FORWARD CURRENT
Propagation Delay Time tPHL, tPLH ( s)
µ
VCC = 5 V,
RL = 2.2 kΩ
tPHL
tPLH
10
1
0.1 10 k 100 k
1 k
Load Resistance RL (Ω)
PROPAGATION DELAY TIME vs.
LOAD RESISTANCE
Propagation Delay Time tPHL, tPLH ( s)
µ
VCC = 5 V,
IF = 16 mA
tPLH
tPHL
5
4
2
0
3
1
–50 0 50 100
–25 7525
Ambient Temperature TA (°C)
NORMALIZED PROPAGATION DELAY TIME
vs. AMBIENT TEMPERATURE
Normalized Propagation Delay Time tPHL, tPLH
Normalized to 1.0
at TA = 25°C,
IF = 16 mA, VCC = 5 V,
RL = 2.2 kΩ
tPLH
tPHL
Remark The graphs indicate nominal characteristics.
Data Sheet PN10260EJ06V0DS
8
PS8101
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
Taping Direction
Outline and Dimensions (Reel)
Packing: 2 500 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ
21.0±0.8
φ
330±2.0
φ
100±1.0
φ
2.0±0.5
11.9 to 15.4
Outer edge of
flange
17.5±1.0
13.5±1.0
13.0±0.2
φ
PS8101-F3 PS8101-F4
1.55±0.1
2.0±0.05
4.0±0.1
1.75±0.1
3.9±0.1
3.45 MAX.
7.4±0.1
0.3±0.05
8.0±0.1
1.5
+0.1
–0
5.5±0.1
12.0±0.2
3.0±0.1
Data Sheet PN10260EJ06V0DS 9
PS8101
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
1.45
0.81.27
5.5
Data Sheet PN10260EJ06V0DS
10
PS8101
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s
(preheating)
220°C
180°C
Package Surface Temperature T (°C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260°C MAX.
120°C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100°C
Data Sheet PN10260EJ06V0DS 11
PS8101
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between VCC
and GND at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum
ratings.
<R>
Data Sheet PN10260EJ06V0DS
12
PS8101
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter Symbol Speck Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1) 55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 × UIORM, Pd < 5 pC
UIORM
Upr
707
1 061
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 × UIORM, Pd < 5 pC Upr 1 326 Vpeak
Highest permissible overvoltage UTR 6 000 Vpeak
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) CTI 175
Material group (DIN EN 60664-1 VDE0110 Part 1) III a
Storage temperature range Tstg –55 to +125 °C
Operating temperature range TA –55 to +100 °C
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
VIO = 500 V dc at TA MAX. at least 100°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Tsi
Isi
Psi
Ris MIN.
150
200
300
109
°C
mA
mW
Ω
<R>
Data Sheet PN10260EJ06V0DS 13
PS8101
The information in this document is current as of August, 2009. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products
and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC
Electronics products are not taken measures to prevent radioactive rays in the product design. When customers
use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate
sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in
order to avoid risks of the damages to property (including public or social property) or injury (including death) to
persons, as the result of defects of NEC Electronics products.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
•
•
•
•
•
•
M8E0904E
(1)
(2)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
"Standard":
"Special":
"Specific":
PS8101
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
