TLP320,TLP320-2,TLP320-4 TOSHIBA Photocoupler GaAs Ired & Photo-Transistor TLP320, TLP320-2, TLP320-4 Telecommunication Office Machine Telephone Use Equipment Unit: mm The TOSHIBA TLP320, -2 and -4 consists of a photo-transistor optically coupled to a gallium arsenide infrared emitting diode. The TLP320-2 offers two isolated channels in an eight lead plastic DIP package, while the TLP320-4 provides four isolated channels in a sixteen lead plastic DIP package. This is suitable for application of AC input current up to 150mA. * IF maximum rating: 150 mA * Collector-emitter voltage: 55 V (min) * Current transfer ratio: 25% (min) * Isolation voltage: 5000 Vrms (min) * UL recognized: UL1577, File No. E67349 * c-UL recognized: CSA Component Acceptance Service No. 5A File No.E67349 TOSHIBA 11-5B2 Weight: 0.26g (typ.) Unit: mm Pin Configurations (top view) TLP320 TLP320-4 TLP320-2 1 4 1 8 1 16 2 3 2 7 2 15 3 6 3 14 4 5 4 13 5 12 6 11 7 10 8 9 1 : Anode Cathode 2 : Cathode Anode 3 : Emitter 4 : Collector TOSHIBA 11-10C4 Weight: 0.54g (typ.) Unit: mm 1,3 : Anode Cathode 2,4 : Cathode Anode 5,7 : Emitter 6,8 : Collector 1,3,5,7 : Anode Cathode 2,4,6,8 : Cathode Anode 9,11,13,15 : Emitter 10,12,14,16 : Collector TOSHIBA 11-20A3 Weight: 1.1 g (typ.) Start of commercial production 1994-03 1 2017-05-09 TLP320,TLP320-2,TLP320-4 Absolute Maximum Ratings (Ta = 25C) Rating Characteristic Symbol TLP320-2 TLP320-4 TLP320 Forward current IF 150 mA IF/C -1.5 mA/C Pulse forward current (100s pulse, 100 pps) IFP 1 A Diode power dissipation PD 200 mW PD/C -2.0 mW/C Tj 125 C Collector-emitter voltage VCEO 55 V Emitter-collector voltage VECO 7 V Collector current IC 80 mA Collector power dissipation (1 circuit) PC 150 100 mW Collector power dissipation derating (1 circuit) (Ta 25C) PC/C -1.5 -1.0 mW/C LED Forward current derating (Ta 25C) Diode power dissipation derating (Ta 25C) Junction temperature Detector Unit Junction temperature Tj 125 C Storage temperature range Tstg -55 to 125 C Operating temperature range Topr -55 to 100 C Lead soldering temperature (10 s) Tsol 260 C Total package power dissipation (1 circuit) PT 250 200 mW Total package power dissipation derating (1 circuit) (Ta25C) PT/C -2.5 -2.0 mW/C Isolation voltage (AC, 60 s, R.H. 60%) (Note 1) BVS 5000 Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: The device is considered as a two terminal device: LED side pins shorted together and detector side pins shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage VCC 5 24 V Forward current IF 20 120 mA Collector current IC 1 10 mA Topr -25 85 C Operating temperature Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2017-05-09 TLP320,TLP320-2,TLP320-4 Electrical Characteristics (Ta = 25C) Detector LED Characteristic Symbol Test Condition Min Typ. Max Unit Forward voltage VF IF = 100 mA -- 1.4 1.7 V Forward current IF VF = 0.7 V -- 2.5 10 A Capacitance CT V = 0 V, f = 1 MHz -- 60 -- pF Collector-emitter breakdown voltage V(BR)CEO IC = 0.5 mA 55 -- -- V Emitter-collector breakdown voltage V(BR)ECO IE = 0.1 mA 7 -- -- V VCE = 24 V -- 10 100 nA VCE = 24 V, Ta = 85C -- 2 50 A V = 0 V, f = 1 MHz -- 10 -- pF Min Typ. Max Unit Collector dark current ICEO Capacitance collector to emitter CCE Coupled Electrical Characteristics (Ta = 25C) Characteristic Symbol IC/IF IF = 20 mA, VCE = 1 V 25 -- -- IC/IF(high) IF = 100 mA, VCE = 1 V 20 -- 80 IC = 2.4 mA, IF = 20 mA -- -- 0.4 IC = 2.4 mA, IF = 100 mA -- -- 0.4 VF = 0.7 V, VCE = 24 V -- 1 10 A IC(IF = -20mA)/IC(IF = +20mA) 0.5 1 2 -- Current transfer ratio Collector-emitter saturation voltage Off-state collector current CTR symmetry Note 1: Test Condition VCE(sat) IC(off) (Note 1) IC(ratio) I (I = I , V = 1V) IC(ratio) = C2 F F2 CE IC1(IF = IF1, VCE = 1V) % V IC1 VCE IF1 IC2 IF2 Isolation Characteristics (Ta = 25C) Characteristic Symbol Test Condition Min Typ. Max Unit -- 0.8 -- pF 5x1010 1014 -- 5000 -- -- AC, 1 s, in oil -- 10000 -- DC, 60 s, in oil -- 10000 -- Capacitance input to output CS VS = 0 V, f = 1 MHz Isolation resistance RS VS = 500 V, R.H. 60% AC, 60 s Vrms Isolation voltage BVS 3 Vdc 2017-05-09 TLP320,TLP320-2,TLP320-4 Switching Characteristics (Ta = 25C) Characteristic Symbol Rise time tr Fall time tf Turn-on time ton Test Condition VCC = 10 V, IC = 2 mA RL = 100 Min Typ. Max -- 2 -- -- 3 -- -- 3 -- Turn-off time toff -- 3 -- Turn-on time tON -- 2 -- -- 15 -- -- 25 -- Storage time ts Turn-off time tOFF Fig. 1 RL = 1.9 k VCC = 5 V, IF = 16 mA (Fig.1) Unit s s Switching time test circuit IF VCC IF RL tS VCE VCE VCC 4.5V 0.5V tON 4 tOFF 2017-05-09 TLP320,TLP320-2,TLP320-4 PC - Ta 200 160 160 TLP320 Allowable collector power dissipation PC (mW) Allowable forward current IF (mA) IF - Ta 200 120 80 40 0 -20 0 20 40 60 80 100 120 TLP320-2, -4 80 40 0 -20 120 0 40 20 Ambient temperature Ta (C) Ta = 25C 50 (mA) Ta = 25C 30 10 500 Forward current IF IFP (mA) Allowable pulse forward current 120 I F - VF 1000 300 100 50 30 5 3 1 0.5 0.3 10 10-3 10-2 10-1 100 0.1 0.6 Duty cycle ratio DR 0.8 1.0 1.2 Forward voltage VF / Ta - IF 1.4 VF 1.6 1.8 (V) IFP - VFP -3.2 -2.8 (mA) -2.4 IFP 1000 Pulse forward current Forward voltage temperature coefficient VF / Ta (mV / C) 100 100 Pulse width 100s 3000 80 Ambient temperature Ta (C) IFP - DR 5000 60 -2.0 -1.6 -1.2 -0.8 500 300 100 50 30 10 Pulse width 10s 5 Repetitive 3 frequency = 100Hz Ta = 25C -0.4 0.1 0.3 1 3 Forward current 10 IF 30 1 0.6 50 (mA) 1.0 1.4 1.8 Pulse forward voltage VFP 5 2.6 2.2 (V) 2017-05-09 TLP320,TLP320-2,TLP320-4 IC - IF IC / IF - IF 200 2000 Ta = 25C 50 1000 500 1 30 0.4 10 5 3 1 50 30 5 3 1 3 Forward current 10 IF 30 1 0.1 100 (mA) 0.4 10 0.3 0.3 1 100 0.5 0.1 0.1 VCE=5V 300 Current transfer ratio IC / IF (%) (mA) IC Collector current Ta = 25C VCE=5V 100 0.3 1 3 Forward current 10 IF 30 100 (mA) ICEO - Ta 101 Collector dark current ICEO (A) VCE=24V 10 100 5 10-1 10-2 10-3 10-4 0 20 40 60 80 100 120 Ambient temperature Ta (C) 6 2017-05-09 TLP320,TLP320-2,TLP320-4 RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. 7 2017-05-09