Product catalogue | Terminals | Tension clamp technology | Accessories | Test adapter | ZTA 4 General ordering data Order No. Part designation Version EAN Qty. Product notes Product description 1688110000 ZTA 4 Modular terminal, accessories, Test adapter 4008190855666 25 pc(s). The clip-on test adapter ZTA is used as a single thin element and as a test adapter strip for measurements in electrical cabinets. Conductors with cross-sections from 0.5 mm to 1.5 mm can be connected. The test adapter simply clips onto the terminal and thus guarantees reliable contact with the live busbar. Additional technical data Installation advice Direct mounting Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection Stripping length Solid, min. Solid, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) 0.5 mm 1.5 mm Plug-in connection 10 mm 0.5 mm 1.5 mm 0.5 mm 1.5 mm 0.5 mm 1.5 mm Dimensions Width Height of lowest version Length 5.1 mm 69 mm 31 mm -1- Product catalogue | Terminals | Tension clamp technology | Accessories | Test adapter | ZTA 4 Dimensions Rating data Rated cross-section Rated current 1.5 mm 11 A Test adapter Function With snap-in pegs Test adapter Yes Test adapter dimensions Height with TS 35 With snap-in pegs 69 mm Yes Test adapter rated data Rated voltage 250 V Approvals Approvals institutes Classifications eClass 4.1 eClass 5.0 eClass 5.1 NK NK NK Similar products Order No. Part designation Version -2-