Intelligent DALI(R) Dimmer For Home Automation Designed to meet the newest in DALI (Digital Addressable Lighting Interface) Lighting control protocol IEC 62386, the GRE Alpha lighting automation projects. Working with DALI Lighting controllers has never been easier. With wide input voltage settings and compatibility with DALI(R) enabled Lighting control systems, the GRE Alpha DALI Dimmer module provides smooth, 0-100% linear dimming with <0.1 Watts of standby power. SLD-DIM-DALI DALI 240W LED Dimming Module Features t Wide range DC input t 0-100% Dimming t Low standing Power t 255 Dimming levels t With terminal block connectors for easy connection t Comply with EN55015 and FCC Part 15 without t t t Suitable for LED lighting and signage applications Compact size, high reliability 3 years warranty Applications t t t t Model SLD-DIM-DALI DALI Lighting Control Home Automation DALI LED Lighting Fixtures Interior and Exterior LED lighting Input Voltage Range (Vdc) Output Voltage Range * Max Output Current (A)** Max Output Power (W) Power 8 - 48V Vin-0.2V 5 240 97% (Typ) * - SLD-DIM-DALI dimming module requires an external CV LED driver, connected to the DC input, and should not exceed the above input voltage range. The voltage drop is measured directly from the input connector to the output connector. Copyright (c) 2015 GRE Alpha. All rights reserved. Reproduction in whole or in part without permission is prohibited. SLD_DIM_201605 Voltage Range 8-48 V Input Current 5A max Control Voltage DALI BUS Control Range 0-100% DALI protocol Short Circuit Protection Hiccup-Mode, Auto-Recovery upon removal of short circuit condition Over Voltage Auto Recovery upon input voltage under Vin (max) Over Temperature Protection Auto recovery upon operating temperature <105C Under voltage Logout Auto Recovery upon input voltage over Vin (min) Output Frequency 1k Hz PWM Output Current 5A max. at full load ** 97% Typ Dimming Level 255 dimming levels ** - Max. output current is dependent on LED driver output current, which should not exceed the Class 2 maximum of 5A Ambient Temperature Storage Temp Relative Humidity -20C -40C - 85C 5% - 95 % 50C (Full Load ) Compliance / Safety Safety Standards LED Status EN55015, IEC62386-101 / 102 / 207 UL244A Power Unit Dimensions 6 mm(L) x 40mm(W) x mm(H) Case Design/Material Polycarbonate White Connector Type WAGO terminal block connectors Connectors Vin+, Vin-, DALIx2, LED+, LED- Wire Size AWG 24 - 16 (0.25-1mm2 ) LED Status Description Green ashing Normal / Ready Green rapid ashing Communication in progress Red ON OCP / OVP/ OTP/ UVP / Lamp failure (<100mA) Copyright (c) 2015 GRE Alpha. All rights reserved. Reproduction in whole or in part without permission is prohibited. SLD_DIM_201 05 Derating Curve 120 Load (%) 100 80 60 40 20 0 -20 -10 0 10 20 30 40 50 Operating Temperature ( ) Mechanical Diagram Packing Information: 0.04kg/pc; 150 pcs/carton; 6.8kg/ carton; L435*W250*H193(mm) Copyright (c) 2015 GRE Alpha. All rights reserved. Reproduction in whole or in part without permission is prohibited. SLD_DIM_201605 Wiring Diagrams "MQIB$7%SJWFST Information furnished is believed to be accurate and reliable. However, GRE Alpha assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by without notice. This publication supersedes and replaces all information previously supplied. The GRE Alpha logo is a registered trademark of GRE Alpha Electronics Ltd. All other names are the property of their respective owners Copyright (c) 2015 GRE Alpha. All rights reserved. Reproduction in whole or in part without permission is prohibited. SLD_DIM_20105