TSG-4100-ATT - Tektronix - Product.Network

RF Vector Signal Generators

TSG4100A Series

The TSG4100A Series RF Vector Signal Generator offers mid-range

performance and up to 200 MHz modulation bandwidth at an entry-level RF

signal generator price. They use a new technique to provide spurious free

outputs with low phase noise (-113 dBc/Hz at 20 kHz offset from 1 GHz

carrier) and extraordinary frequency resolution (1 μHz at any frequency).

The TSG4100A Series comes standard with analog modulation.

Convenient, in-field software upgrades allow for easy transition from analog

to more advanced vector and digital modulation capabilities, providing the

most flexible configuration and best CAPEX protection. These instruments

complement other leading mid-range RF test solutions from Tektronix, such

as the USB-based RSA306 Spectrum Analyzer and MDO4000B and

MDO3000 Mixed Domain Oscilloscopes.

The TSG4100A Series instruments use an ovenized SC-cut oscillator

(TSG410xA-M00 or E1 models) time-base, providing a 100 X improvement

in stability (and a 100 X reduction in the in-close phase noise) compared to

instruments that use a TCXO time-base.

Key features

Analog and vector/digital signal generation capabilities

Dual baseband ARB generators

Analog modulation standard

Soft key upgrade to vector/digital modulation at very low cost

Digital modulation applications for GSM, EDGE, W-CDMA, APCO-25,

DECT, NADC, PDC, and TETRA

USB, GPIB, RS-232, and LAN interfaces

12 pounds (5.6 kg)

2U high and half standard rack width

Key performance specifications

True DC to 2 GHz, 4 GHz or 6 GHz to support both analog and vector/

digital signal generation

Typical ≤±0.30 dB amplitude accuracy (0 dBm CW signal at 22 ºC)

from 10 MHz to 6 GHz

I/Q modulation inputs (400 MHz RF bandwidth)

ASK, FSK, MSK, PSK, QAM, VSB, and custom I/Q

Analog modulation

The Tektronix TSG4100A Series RF Vector Signal Generators offer a wide

variety of modulation capabilities. Modes include amplitude modulation

(AM), frequency modulation (FM), phase modulation (ΦM), and pulse

modulation. There is an internal modulation source as well as an external

modulation input. The internal modulation source produces sine, ramp,

saw, square, and noise waveforms. An external modulation signal may be

applied to the rear panel modulation input. The internal modulation

generator is available as an output on the rear panel.

Vector modulation

The TSG4100A Series builds on this performance by adding full support for

vector signal modulation on RF carriers between 400 MHz and 6.0 GHz. It

features a dual arbitrary waveform generator operating at 125 MHz for

baseband signal generation. The generator has built-in support for the most

common vector modulation schemes: ASK, QPSK, DQPSK, π/4 DQPSK,

8PSK, FSK, CPM, QAM (4 to 256), 8VSB, and 16VSB. It also includes

built-in support for all the standard pulse shaping filters used in digital

communications: raised cosine, root-raised cosine, Gaussian, rectangular,

triangular, and more. Lastly, it provides direct support for the controlled

injection of additive white Gaussian noise (AWGN) into the signal path.

www.tektronix.com 1

Internal baseband generators

Using a novel architecture for I/Q modulation, the TSG4100A Series

provides quick, user-friendly waveform generation. The baseband

generator supports the playback of pure digital data. It automatically maps

digital symbols into a selected I/Q constellation at symbol rates of up to

6 MHz and passes the result through the selected pulse shaping filter to

generate a final waveform updated in real time at 125 MHz. This baseband

signal is then modulated onto an RF carrier using standard IQ modulation

techniques.

Digital communications protocols (GSM, GSM EDGE, W-CDMA, APCO-25,

DECT, NADC, PDC, and TETRA) quickly configure the signal generator to

the correct modulation type, symbol data rates, TDMA duty cycles, and

digital waveform filters. The preset protocols also configure the rear-panel

TDMA, START of FRAME, and SYMBOL CLOCK digital outputs. The

baseband generators can be configured for these protocols without the use

of external computers or third party software.

The I/Q waveforms are computed in real time. Symbols are mapped to

constellations, digitally filtered, and up-sampled to 125 Msps to drive the I/

Q modulator via dual 14-bit DACs. The symbols can be a fixed pattern,

PRBS data from an internal source, or come from a downloaded user list of

up to 16 Mbits.

The constellation mapping can be modified by the user. Digital filters

include raised cosine, root raised cosine, Gaussian, rectangular, linear,

sinc, and user-defined FIR.

External IQ modulation

The rear-panel BNC I/Q modulation inputs and outputs enable arbitrary

vector modulation via an external source. The external signal path supports

maximally 400 MHz of RF bandwidth with a full scale range of ±0.5 V and a

50 Ω input impedance.

Power vs. frequency

All TSG4100A Series models have cascaded stages of amplifiers and

digital attenuators to drive the RF output. Five stages can provide up to

+25 dB of gain to -130 dB of attenuation in 156 digitally controlled steps.

During factory calibration, the output power is measured at 32 frequencies

per octave for each of the 156 attenuator steps to populate a memory

matrix with about 40,000 elements. When set to a particular frequency and

power, the instrument interpolates between these matrix elements to

determine the best attenuator setting. An analog attenuator is used to

provide 0.01 dB resolution between matrix elements and to compensate for

residual thermal effects.

OCXO time-base

These instruments offer an oven-controlled crystal oscillator (OCXO) time-

base. The time-base uses a third-overtone stress-compensated 10 MHz

resonator in a thermostatically controlled oven. The time-base provides

very low phase noise and very low aging.

Easy remote communications

Remote operation is supported with RS-232, LAN, and GPIB interfaces. All

instrument functions can be controlled and read over any of the interfaces.

Up to nine instrument configurations can be saved in non-volatile memory.

TSG4100A Series RF Vector Signal Generator

2 www.tektronix.com

Specifications

All specifications apply to all models unless noted otherwise.

Frequency

BNC output, all models DC to 62.5 MHz

N-type outputs

TSG4102A 950 kHz to 2.0 GHz

TSG4104A 950 kHz to 4.0 GHz

TSG4106A 950 kHz to 6.0 GHz

Frequency resolution 1 μHz at any frequency

Switching speed <8 ms (to within 1 ppm)

Frequency error <(10–18 + time-base error) × fc

Frequency stability 1 × 10–11 (1 s Allan variance)

Front panel BNC output

Frequency range DC to 62.5 MHz

Amplitude 1.00 VRMS to 0.001 VRMS (-47 dBm to +14.96 dBm)

Offset ±1.5 VDC

Offset resolution 5 mV

Maximum excursion 1.817 V (amplitude + offset)

Amplitude resolution <1 %

Amplitude accuracy ±0.7 dB

Harmonics, typical <–40 dBc

Spurious, typical <–65 dBc

Output coupling DC, 50 Ω ±2%

Impedance 50 Ω

Reverse protection ±5 VDC

VSWR, typical < 1.6 :1

Datasheet

www.tektronix.com 3

Front panel N-type output

Power output

TSG4102A +16.5 dBm to –110 dBm

TSG4104A +16.5 dBm to –110 dBm (<3 GHz)

TSG4106A +16.5 dBm to –110 dBm (<4 GHz)

+10 dBm to –110 dBm (4-6 GHz)

Voltage output

TSG4102A 1.5 VRMS to 0.7VRMS

TSG4104A 1.5 VRMS to 0.7 μVRMS (<3 GHz)

TSG4106A 1.5 VRMS to 0.7 μVRMS (<4 GHz)

Amplitude resolution 0.01 dBm

Amplitude accuracy

CW, 50 Ω load (dB, typical) CW, 18 °C to 28 °C >10 dBm 10 to -30 dBm -30 to -60 dBm -60 to -100 dBm <-100 dBm

10 MHz to 0.1 GHz ±0.2 ±0.25 ±0.35 ±0.45 ±0.6

0.1 GHz to 2 GHz ±0.15 ±0.15 ±0.25 ±0.35 ±0.6

2 GHz to 4 GHz ±0.3 ±0.2 ±0.35 ±0.6 ±0.8

4 GHz to 6 GHz NA ±0.3 ±0.4 ±0.75 ±1.25

CW, 50 Ω load (dB, max) Level range: +5 to -30 dBm (max) +5 to -30 dBm (typical)

Temperature: 18 °C to 28 °C 5 °C to 40 °C 5 °C to 40 °C

10 MHz to 0.1 GHz ±0.6 ±1.0 ±0.7

0.1 GHz to 2 GHz ±0.6 ±1.0 ±0.6

2 GHz to 4 GHz ±0.6 ±1.0 ±0.7

4 GHz to 6 GHz ±1 ±1.5 ±0.9

Impedance 50 Ω

Output coupling AC, 50 Ω

VSWR, typical <1.5 (2 MHz to 2 GHz)

<1.8 (2 GHz to 6 GHz)

Reverse protection 30 VDC, +25 dBm

IQ modulation output level

accuracy

Output amplitude is -5 dBm.

Temperature: 18 °C to 28 °C 5 °C to 40 °C

Fc: Typical (dB) Max (dB) Typical (dB)

<2 GHz ±0.1 ±0.4 ±0.4

2 GHz to 4 GHz ±0.2 ±0.6 ±0.4

4 GHz to 6 GHz ±0.4 ±0.8 ±0.7

TSG4100A Series RF Vector Signal Generator

4 www.tektronix.com

Spectral purity of the RF output

Subharmonics None

Harmonics, maximum Output level <0 dBm, 1 GHz CW signal

TSG4102A and TSG4104A < -38 dBc

TSG4106A < -30 dBc

Harmonics, typical (output level <

0 dBm)

< -35 dBc, CW , Fc < 2 GHz

Spurious (typical) Output level -10 dBm, CW

< -68 dBc >10 kHz from carrier in 950 kHz to 1 GHz

< -60 dBc >10 kHz from carrier in 1 GHz to 2 GHz

< -55 dBc >10 kHz from carrier in 2 GHz to 4 GHz

< -55 dBc >10 kHz from carrier in 4 GHz to 6 GHz

Residual FM, typical 1 Hz rms (300 Hz to 3 kHz bandwidth)

Residual AM, typical 0.006 % rms (300 Hz to 3 kHz bandwidth)

SSB phase noise Output level is +5 dBm at 18 °C to 28 °C.

Carrier Offset from carrier, typical (dBc/Hz)

1 kHz 10 kHz 20 kHz 1 MHz

1 GHz -102 -110 -113 -124

2 GHz -96 -104 -107 -118

3 GHz -93 -102 -105 -120

6 GHz -87 -96 -99 -114

SSB phase noise at 1 GHz carrier,

maximum (output level +5 dBm,

5 ℃ to 40 ℃)

1 kHz offset –95 dBc/Hz

10 kHz offset –106 dBc/Hz

20 kHz offset –107 dBc/Hz

1 MHz offset –120 dBc/Hz

2 GHz offset –118 dBc/Hz

>3 GHz offset –120 dBc/Hz

Datasheet

www.tektronix.com 5

Phase setting (front panel outputs)

Maximum phase step ±360º

Phase resolution 0.01º (DC to 100 MHz)

0.1º (100 MHz to 1 GHz)

1.0º (1 GHz to 6 GHz)

OCXO time-base (Option M00 or Option E1)

Oscillator type Oven-controlled, 3rd OT, SC-cut crystal

Initial accuracy at calibration

(20 minute warm-up, at 18 ºC to

28 ºC)

<±0.02 ppm

Temperature drift (0 ºC to 40 ºC) <±0.003 ppm

Aging <±0.05 ppm/year

TSG4100A Series RF Vector Signal Generator

Spectral purity of the RF output

6 www.tektronix.com

VCXO time base (Option M01)

Initial accuracy at calibration

(20 minute warm-up, at 18 ºC to

28 ºC)

<±0.5 ppm

Temperature drift (0 ºC to 40 ºC) <±5.0 ppm

Aging <±3.0 ppm/year

Time-base input

Frequency 10 MHz, ±2 ppm

Amplitude 0.5 VP-P to 4 VP-P (–2 dBm to +16 dBm)

Input impedance 50 Ω, AC coupled

Time-base output

Frequency 10 MHz, sine

Source 50 Ω, DC transformer coupled

Amplitude >7.5 dBm

Internal modulation source

Waveforms Sine, ramp, saw, square, pulse, noise

Sine THD –74 dBc (typical at 20 kHz)

Ramp linearity <0.05 % (1 kHz)

Rate

TSG4102A and TSG4104A 1 μHz to 500 kHz: < 62.5 MHz CF

1 μHz to 50 kHz: ≥62.5 MHz

TSG4106A 1 μHz to 500 kHz: < 93.75 MHz CF

1 μHz to 50 kHz: ≥93.75 MHz

Rate resolution 1 μHz

Rate error 1:231 + time-base error

Noise function White Gaussian noise (rms = dev / 5)

Noise bandwidth 1 μHz < ENBW < 50 kHz

Pulse generator period 1 μs to 10 s

Pulse generator width 100 ns to 9999.9999 ms

Pulse timing resolution 5 ns

Pulse noise function Length 2N-1 PRBS 5 ≤ N ≤ 32, bit period 100 nS to 10 S

Datasheet

www.tektronix.com 7

Analog modulation output

Connector type BNC (rear panel)

Impedance 50 Ω

Function AM, FM, ΦM, Pulse

Scale factor ±1 V for ± full deviation

Pulse/Blank Low = 0 V

Hi = 3.3 V

External analog modulation input

Connector type BNC (rear panel)

Impedance 100 kΩ

Function AM, FM, ΦM, Pulse

Scale factor ±1 V for ± full deviation

Pulse/Blank Low = 0 V

Hi = 3.3 V

Input coupling DC or 4 Hz High-pass

Pulse Threshold +1 VDC

Input Offset < 500 μV

Amplitude modulation

Range 0 to 100% (decreases above +7 dBm)

Resolution 0.1%

Modulation source Internal or external

Modulation distortion, typical

BNC output <1 % (fc < 62.5 MHz, fm = 1 kHz)

N-type output <3 % (fc > 62.5 MHz, fm = 1 kHz)

Modulation bandwidth (external) >100 kHz

TSG4100A Series RF Vector Signal Generator

8 www.tektronix.com

Frequency modulation

Minimum frequency deviation 0.01 Hz

Maximum frequency deviation

TSG4102A and TSG4104A Smaller of fc and 64 MHz – In 0 to 62.5 MHz

Frequency range Maximum deviation

62.5 MHz < fc ≤ 126.5625 MHz 1 MHz

126.5625 MHz < fc ≤253.1250 MHz 2 MHz

253.1250 MHz < fc ≤ 506.25 MHz 4 MHz

506.25 MHz < fc ≤ 1.0125 GHz 8 MHz

1.0125 GHz < fc ≤ 2.0 GHz 16 MHz

2.025 GHz < fc ≤ 4.0 GHz (TSG4104A) 32 MHz

TSG4106A Smaller of fc and 96 MHz – In 0 to 93.75 MHz

Frequency range Maximum deviation

93.75 MHz < fc ≤ 189.84375 MHz 1 MHz

189.84375 MHz < fc ≤ 379.6875 MHz 2 MHz

379.6875 MHz< fc ≤ 759.375 MHz 4 MHz

759.375 MHz < fc ≤ 1.51875 GHz 8 MHz

1.51875 GHz < fc ≤ 3.0375 GHz 16 MHz

3.0375 GHz < fc ≤ 6.0 GHz 32 MHz

Deviation resolution 0.1 Hz

Deviation accuracy, typical

TSG4102A and TSG4104A < 0.1% of selected deviation + 5 Hz (fc < 62.5 MHz)

< 2% of selected deviation + 20 Hz (fc > 62.5 MHz)

TSG4106A < 0.1% of selected deviation + 5 Hz (fc < 93.75 MHz)

< 2% of selected deviation + 20 Hz (fc > 93.75 MHz)

Modulation source Internal or external

Modulation distortion, typical < -60 dB (fc=100 MHz, fm=1 KHz, fd= 3 KHz)

External FM carrier offset, typical < ±0.001 X FM deviation

Modulation bandwidth, typical

TSG4102A and TSG4104A 500 kHz (fc < 62.5 MHz)

100 kHz (fc > 62.5 MHz)

TSG4106A 500 kHz (fc < 93.75 MHz)

100 kHz (fc > 93.75 MHz)

Datasheet

www.tektronix.com 9

Phase modulation

Deviation 0º to 360º

Deviation resolution, typical 0.01º (DC to 100 MHz)

0.1º (100 MHz to 1 GHz)

1º (1 GHz and above)

Deviation accuracy, typical

TSG4102A and TSG4104A 2% (fc < 62.5 MHz)

3% (fc > 62.5 MHz)

TSG4106A 2% (fc < 93.75 MHz)

3% (fc > 93.75 MHz)

Modulation source Internal or external

Modulation distortion, typical < -60 dB (fc = 100 MHz, fm =1 kHz, ΦD = 50º)

Modulation bandwidth, typical

TSG4102A and TSG4104A 500 kHz (fc < 62.5 MHz)

100 kHz (fc > 62.5 MHz)

TSG4106A 500 kHz (fc < 93.75 MHz)

100 kHz (fc > 93.75 MHz)

Pulse modulation

Pulse mode Logic High turns RF output ON

On-Off ratio, typical

BNC output > 70 dB

Type-N output > 57 dB (fc < 1.0 GHz)

> 40 dB (1.0 GHz ≤ fc < 4.0 GHz)

> 35 dB (4.0 GHz ≤ fc < 6.0 GHz)

Pulse feed-through, typical 10% of carrier for 20 ns at turn on

Turn On-Off delay 60 ns

RF Rise-Fall time, typical 20 ns

Modulation source Internal or external pulse

TSG4100A Series RF Vector Signal Generator

10 www.tektronix.com

Interface connectors

USB USB 2.0, host

Ethernet (LAN) 10/100 Base-T.TCP/IP and DHCP default

GPIB IEEE488.2

RS-232 4800 to 115,200 baud, RTS/CTS flow

External I/Q modulation (Option EIQ)

Carrier frequency range 400 MHz to 2.0 GHz (TSG4102A)

400 MHz to 4.0 GHz (TSG4104A)

400 MHz to 6.0 GHz (TSG4106A)

I/Q inputs (rear panel) 50 Ω, ±0.5 V

I/Q full scale input (I2 + Q2)1/2 = 0.5 V

Modulation bandwidth max 400 MHz RF bandwidth

I or Q input offset <500 μV

Carrier suppression > -45 dBc for fc ≤ 3 GHz

> -40 dBc for 3 GHz < fc ≤ 5 GHz

> -35 dBc for fc > 5 GHz

I and Q baseband modulation

bandwidth (3 dB from fc)

> 200 MHz (fc < 2.5 GHz, RF BW >400 MHz)

> 150 MHz (fc > 2.5 GHz, RF BW >300 MHz)

Dual baseband generator (Option VM00)

Channels 2 (I and Q)

DAC data format Dual 14-bit at 125 MS/s

Reconstruction filter 10 MHz, 3rd order Bessel LPF

Arbitrary symbol memory Up to 16 Mbits

Symbol rate 1 Hz to 6 MHz (1 μHz resolution)

Symbol length 1 to 9 bits (maps to constellation)

Symbol mapping Default or user-defined constellation

Symbol source (User-defined

symbols, built-in PRBS generator,

or settable pattern generator)

PRBS length 2n – 1 (5 < n < 32; 31 to about 4.3 × 109 symbols)

Pattern generator 16 bits

Datasheet

www.tektronix.com 11

Digital filtering

Filter type Raised Cosine, Root Raised Cosine, Gaussian, Rectangular, Linear, Sinc, linearized Gaussian, C4FM, customized FIR

Filter length 24 symbols

Noise impairments

Additive noise White, Gaussian

Level –70 dBc to –10 dBc

Basic vector modulation formats (Option VM00)

Formats by bit Constellation 1-bit 2-bit 3-bit 4-bit 5-bit 6-bit 8-bit

ASK 2ASK 4ASK 8ASK 16ASK

FSK BFSK 4FSK 8FSK 16FSK

PSK BPSK QPSK 8PSK 16PSK

QAM n/a 4QAM n/a 16QAM 32QAM 64QAM 256QAM

CPM BCPM 4CPM 8CPM 16CPM

VSB n/a n/a 8VSB 16VSB

Others OQPSK, DQPSK, π/4DQPSK, 3π/8 8 PSK

TSG4100A Series RF Vector Signal Generator

Dual baseband generator (Option VM00)

12 www.tektronix.com

Digital modulation applications (typical)

Digital modulation applications

options

Option Application

VM01 GSM

VM02 GSM-EDGE

VM03 W-CDMA

VM04 APCO-25 Phase 1

VM05 DECT

VM06 NADC

VM07 PDC

VM08 TETRA

VM10 Audio clip (analog AM and FM)

Option VM01 GSM, (GMSK, 270.833 kS/s, 935 MHz, 0 dBm), RMS EVM: 0.6%

Option VM02 GSM-EDGE, (3π/8 8PSK, 270.833 kS/s, 935 MHz, 0 dBm), RMS EVM: 0.30%

Datasheet

www.tektronix.com 13

Option VM03 W-CDMA, (QPSK,3.840Mcps, 2.1425GHz, 0dBm), RMS EVM: 1.7%

TSG4100A Series RF Vector Signal Generator

Digital modulation applications (typical)

14 www.tektronix.com

Option VM03 W-CDMA (QPSK,3.840Mcps, 1.85 GHz, 0dBm), RMS EVM: 1.7%

Option VM04 APCO-25, (4FSK-C4FM, 4.8 kS/s,850 MHz, 0 dBm), Freq Err: 0.5%

Datasheet

Digital modulation applications (typical)

www.tektronix.com 15

Option VM05 DECT, (2FSK 1.152 Mbps,1.925 GHz, 0 dBm), RMS FSK Err: 1.5%

Option VM06 NADC, (π/4 DQPSK, 24.3 kS/s, 875 MHz, 0 dBm), RMS EVM: 0.3%

TSG4100A Series RF Vector Signal Generator

Digital modulation applications (typical)

16 www.tektronix.com

Option VM07 PDC, (π/4 DQPSK, 21 kS/s, 800 MHz, 0 dBm), RMS EVM: 0.6%

Option VM08 TETRA, (π/4 DQPSK,18 kS/s, 420 MHz, 0 dBm), RMS EVM: 0.7%

Datasheet

Digital modulation applications (typical)

www.tektronix.com 17

32QAM, (6 MS/s, 5.8 GHz, Root raised cosine filter, 0 dBm), RMS EVM: 1.6%

256QAM, (6 MS/s, 2.45 GHz, Root raised cosine filter, -5.00 dBm), RMS EVM: 0.6%

TSG4100A-ATT Option

Nominal impedance 50 Ω

Nominal attenuation 30 dB

Frequency range DC to 6 GHz

Attenuation deviation ±0.75 dB (DC to 6 GHz)

Maximum VSWR 1.15 (DC to 4 GHz)

1.2 (4 GHz to 6 GHz)

Power rating 5 Watt average power up to 25 ˚C ambient temperature, linearly derated to 1 Watt at 125 ˚C ambient temperature.

Weight 0.052 kg

TSG4100A Series RF Vector Signal Generator

Digital modulation applications (typical)

18 www.tektronix.com

Operating temperature -65 °C to 125 °C

Compliance 2011/65/EU (RoHS) compliant

Rear-panel markers

Type Symbol Clock, Data Frame, TDMA, and user-defined

Amplitude 0.5 to 4 Vpp (–2 dBm to +16 dBm)

Output impedance 50 Ω, AC coupled

Physical characteristics

Dimensions

Height 114 mm (4.5 in)

Width 216 mm (8.5 in)

Depth 347 mm (13.7 in)

Weight 5.4 kg (12 lbs)

Operating characteristics

Temperature

Operating +5 °C to +40 °C

Non-operating -20 °C to +60 °C

Humidity Operating Non-operating

5% to 95% relative humidity (%RH) at up to +30 °C 5% to 95% RH (Relative Humidity) at up to +30 °C

5% to 45% RH above +30 °C up to +40 °C, non-condensing 5% to 45% RH above +30 °C up to +40 °C, non-condensing

Altitude

Operating Up to 3,000 m

Non-operating Up to 12,000 m

Line power <90 W, 90 to 264 VAC, 47 to 63 Hz with PFC

Vibration and shock

Random vibration Operating Non-operating

0.27 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes

total for Option M01)

2.28 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes

total for Option M01)

0.22 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes

total for Options M00 or E1)

2.13 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes

total for Options M00 or E1)

Mechanical shock Non-operating

Half-sine mechanical shocks, 50 g peak amplitude, 11 msec duration, 3 drops in each direction of each axis (18 total for Option

M01)

Half-sine mechanical shocks, 30 g peak amplitude, 11 msec duration, 3 drops in each direction of each axis (18 total for Options

M00 or E1)

Datasheet

TSG4100A-ATT Option

www.tektronix.com 19

Regulatory information

EC Declaration of Conformity -

EMC

EMC Directive 2004/108/EC EN 61326-1

Radiated and Conducted

emissions

Class A

Australia/New Zealand Australia Radio Communications Act 1992

Korea KCC

Safety

Third Party Certification

Standards

UL 61010; CSA C22.2 No. 61010-1

EC Declaration of Conformity -

Low Voltage

Low Voltage Directive 2006/95/EC; EN61010-1

Safety Certification

Compliance

Equipment type: Test and measuring

Safety class: Class 1 - grounded product

Pollution degree: 2 (as defined in IEC61010-1)

Rated for indoor use only.

TSG4100A Series RF Vector Signal Generator

20 www.tektronix.com

Ordering information

Models

For each of the basic models, there are three required but exclusive model options that need to be specified at the time of order: M00, M01, and E1. Pricing varies based on

chosen option. See the Instrument Options section for details.

TSG4102A Analog signal generator with 2 GHz frequency coverage, basic model

TSG4104A Analog signal generator with 4 GHz frequency coverage, basic model

TSG4106A Analog signal generator with 6 GHz frequency coverage, basic model

Standard accessories

Accessory Description

RF cable 1 meter, N-type to N-type RF cable

Documentation CD All instrument models ship with a CD containing PDF files of user manuals in all available languages.

Installation and Safety Instructions All instrument models ship with a printed Installation and Safety Instructions manual (multi-language: English and Russian).

Calibration Statement of Calibration

Power cord Country specific (see Power cord options)

Warranty

Three years

Instrument options

Hardware options (All regions except North America)

Options M00 or M01 must be specified at the time of instrument order.

M00 Instrument with oven-controlled crystal oscillator (OCXO)

M01 Instrument with voltage-controlled crystal oscillator (VCXO)

GPIB Adds GPIB interface

Hardware options (North America only)

Option E1 must be specified at the time of instrument order.

E1 Instrument with oven-controlled crystal oscillator (OCXO) time-base and GPIB interface

Hardware options (All regions)

TSG4100A-RM1 Single rack mount kit (can be ordered separately)

TSG4100A-RM2 Dual rack mount kit (can be ordered separately)

TSG4100A-ATT 30 dB, 5 W RF attenuator up to 6 GHz

D1 A list of performance verification test results

Datasheet

www.tektronix.com 21

Software options

To upgrade to vector/digital modulation capability and/or add more modulation options after initial purchase, order "TSG4100A-UP + VM xx” instead of “TSG410xA VMxx”.

VM00 Basic vector modulation package with internal 6 MHz modulation bandwidth

VM01 GSM modulation (requires Option VM00)

VM02 GSM EDGE modulation (requires Option VM00)

VM03 W-CDMA modulation (requires Option VM00)

VM04 APCO-25 modulation (requires Option VM00)

VM05 DECT modulation (requires Option VM00)

VM06 NADC modulation (requires Option VM00)

VM07 PDC modulation (requires Option VM00)

VM08 TETRA modulation (requires Option VM00)

VM10 Audio Clip (analog AM and FM)

EIQ External 200 MHz modulation bandwidth (requires Option VM00)

Power plug options

Opt. A0 North America power plug (115 V, 60 Hz)

Opt. A1 Universal Euro power plug (220 V, 50 Hz)

Opt. A2 United Kingdom power plug (240 V, 50 Hz)

Opt. A3 Australia power plug (240 V, 50 Hz)

Opt. A5 Switzerland power plug (220 V, 50 Hz)

Opt. A6 Japan power plug (100 V, 50/60 Hz)

Opt. A10 China power plug (50 Hz)

Opt. A11 India power plug (50 Hz)

Opt. A12 Brazil power plug (60 Hz)

Opt. A99 No power cord

Language options

Request the option below if you would like to order a printed verison of the English User Manual. (An electronic version of this manual is provided as a PDF on the CD that

shipped with your instrument and is also available for download from the Tektronix Web site.)

Opt. L0 English manual

Service options

Opt. C3 Calibration Service 3 Years

Opt. C5 Calibration Service 5 Years

Opt. D1 Calibration Data Report

Opt. D3 Calibration Data Report 3 Years (with Opt. C3)

Opt. D5 Calibration Data Report 5 Years (with Opt. C5)

Opt. R5 Repair Service 5 Years (including warranty)

TSG4100A Series RF Vector Signal Generator

22 www.tektronix.com

Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.

Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.

Product Area Assessed: The planning, design/development and manufacture of electronic Test and Measurement instruments.

Datasheet

www.tektronix.com 23

TSG4100A Series RF Vector Signal Generator

ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777

Belgium 00800 2255 4835* Brazil +55 (11) 3759 7627 Canada 1 800 833 9200

Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401

Finland +41 52 675 3777 France 00800 2255 4835* Germany 00800 2255 4835*

Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835*

Japan 81 (3) 6714 3010 Luxembourg +41 52 675 3777 Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90

Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 00800 2255 4835* Norway 800 16098

People's Republic of China 400 820 5835 Poland +41 52 675 3777 Portugal 80 08 12370

Republic of Korea 001 800 8255 2835 Russia & CIS +7 (495) 6647564 South Africa +41 52 675 3777

Spain 00800 2255 4835* Sweden 00800 2255 4835* Switzerland 00800 2255 4835*

Taiwan 886 (2) 2656 6688 United Kingdom & Ireland 00800 2255 4835* USA 1 800 833 9200

* European toll-free number. If not accessible, call: +41 52 675 3777

For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com.

Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and

price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.

23 Feb 2015 37W-60043-0

www.tektronix.com

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Tektronix:

TSG4100A-UP-VM03 TSG4100A-UP-EIQ TSG4100A-UP-VM08 TSG-4100-RM2 TSG4100A-UP-VM01 TSG4100A-

UP-VM05 TSG4100A-UP-VM10 TSG4100A-UP-VM00 TSG4100A-UP-VM04 TSG4100A-UP-VM07 TSG-4100-ATT

TSG4100A-UP-VM02 TSG-4100-RM1 TSG4100A-UP-VM06

Other:

TSG-4102A TSG-4104A TSG-4106A