The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high reliability connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB 2.0). Receptacles and plugs are available in a wide variety of mounting and termination configurations, permitting their use in various applications. Features Reverse (Top mount) Drop-in (Mid-mount) Standard (Bottom mount) 1. Size reduction Compared with the standard Mini-B connectors, the size of ZX connectors is reduced by approximately 60% while still allowing a high-speed data transfer of 480 Mbps, specified in USB 2.0. 2. Receptacle styles Two interface configurations: Micro-B and Micro-AB in standard, mid-mount and reverse mounting styles. SMT and through-hole (shell) PC board terminations 3. Plug styles 4. High durability Unique contact and lock configuration assures high durability while maintaining easy insertion / disconnection. Fully mated condition (when mated with corresponding HRS connector) is confirmed by a definite tactile sensation 5. RoHS compliant All components and materials comply with the requirements of EU directive 20/95/EC Applications USB 2.0 Hi-Speed (480 Mbps) Eye pattern measurement results: Measured with USB 2.0 cable 2.4 m long 200 mV/div Corresponding to the receptacle styles, two interface configurations: Micro-B and Micro-A, with direct wire or PCB wire soldering. Several plug styles can be used for data transmission, earphone or charging applications. TP2 500ps/div Mobile phones, PDA, portable music players, digital cameras, digital camcorders and other applications requiring high reliability Micro-B interface connectors. 2008.7 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.requirements Please check the products status onStandard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ZX SeriesMicro-USB connectors meeting of USB 2.0 Specifications Ratings Current rating 1 A (per contact) or Voltage rating 30 V AC 1.8 A (contacts No. 1 and 5) and Operating temperature range -30C to +85 C 0.5 A (contacts No. 2, 3, and 4) Storage temperature range -30 C to +85C Item Specification Conditions 1. Contact resistance 30 mo max. 100 mA 2. Withstanding voltage No flashover or insulation breakdown 100 V AC / 1 minute 3. Capacitance 2 pF max. Between adjacent contacts at 1,000 Hz (AC voltage) 4. Durability Contact resistance: Rise from initial value of 10 mo max. 10,000 cycles 5. Total insertion/removal force Insertion force: 35 N max., Removal force: 8 N min. Mated with corresponding connector Materials Receptacles Part Material Insulator LCP Contacts Copper alloy Shell Stainless steel Finish Remarks Micro-B: Black, Micro-AB: Gray UL94V-0 Selective gold plated --------------- Tin alloy plating --------------- Plugs Part Material Insulator Synthetic resin Contacts Copper alloy Lock spring Stainless steel Shell Stainless steel Ordering information Finish Remarks Micro-A: White, Micro-B: Black Selective gold plated --------------- ----------------------------- Nickel plated or unfinished 1 Series name 2 Termination style Receptacles ZX 62 RD - B - 5 P * 8 1 2 3 4 5 6 7 8 3 Board mounting style (Receptacles) Plugs ZX 40 - B - 5 S * - UNIT 1 2 4 5 6 7 9 ZX 40 - B - SLDA 1 2 4 4 Mating side configuration 5 Number of contacts 6 Contact type 9 Receptacles 9 Components-plugs Interface Micro-A Micro-B Micro-AB 2 Receptacle Plug Blank D R RD M A B AB P S 7 Serial No. 8 Shell termination style - Product Styles Table UL94V-0 --------------- Blank 8 UNIT SLD* ZX 10's: Right-angle PCB wire, SMT 20's: Straight, PCB wire 40's: Direct wire 60's: Right-angle, PCB wire 80's: Cradle SMT Standard (Bottom mount) Standard (Bottom mount) through hole Reverse (Top mount) Reverse (Top mount) through hole Drop-in (Mid-mount) Micro-A Micro-B Micro-AB 5 Receptacle- Male Plug - Female SMT Through hole (solder tab length: 0.8mm) Assembly (Insulator/contact/lock) Cover (Note 1) Note 1: Classifiers such as A, B, and C are entered for *. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. ZX SeriesMicro-USB connectors meeting requirements ofyour USB 2.0sales Standard Configurations Mating side Mounting, termination Application configuration styles/wire attachment Part Number 3D Image Page SMT ZX62-B-5PA 4 SMT + DIP ZX62D-B-5P8 4 Reverse SMT ZX62R-B-5P 5 Drop-in SMT ZX62M-B-5P 5 SMT ZX62-AB-5PA 6 SMT + DIP ZX62D-AB-5P8 6 SMT ZX62R-AB-5P 7 SMT + DIP ZX62RD-AB-5P8 7 Direct wire soldering Assembly :ZX40-B-5S-UNIT(12) (insulator/contacts/lock) Cover-top :ZX40-B-SLDA Cover-bottom :ZX40-SLDB 9 and 10 PCB wire soldering (right angle, through hole) Assembly :ZX10-B-5S-UNIT(12) (insulator/contacts/lock) Cover-top :ZX10-B-SLDA Cover-bottom :ZX10-SLDB(3.3) 11 and 12 Standard R e c e p t a c l e s Micro-B Standard Micro-AB Reverse P l u g s Data Micro-B C r a d l e s Micro-A Micro-B Earphone PCB wire soldering Assembly :ZX20-B-5S-UNIT(12) (insulator/contacts/lock) (straight, through hole) Cover :ZX20-B-SLDC Charging PCB wire soldering (SMT) Assembly :ZX64-B-5S-UNIT(14) (insulator/contacts/lock) Cover-top :ZX64-B-SLDA Cover- bottom :ZX64-SLDB 14 and 15 Charging PCB wire soldering (SMT) Earphone Assembly :ZX64-B-5S-UNIT(14) (insulator/contacts/lock) Cover :ZX64-B-SLDC 14 and 16 Assembly :ZX40-A-5S-UNIT (insulator/contacts/lock) Cover-top :ZX40-A-SLDA Cover- bottom :ZX40-SLDB 17 and 18 Data Direct wire soldering Cradle SMT + DIP 13 ZX80-B-5S With lock 19 ZX80-B-5SA Without lock 19 Note: 1. Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers. Note: 2. Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors. Note: 3. The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to the Materials (Page 2) for correct colors. 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.requirements Please check the products status onStandard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ZX SeriesMicro-USB connectors meeting of USB 2.0 Receptacles Micro B - Standard (Bottom mount), Shell SMT Part Number CL No. Packaging RoHS ZX62-B-5PA 242-0033-8 2,000 pieces per reel YES BRecommended PCB mounting pattern 8.3 4.1 2.6 0.6 7.5 4.3 6.2 9.8 5 2.5 1.45 0.5 2.8 1.6 3.35 1.35 1.9 No.5 1.3 0.4 No.1 NO CONDUCTIVE TRACES PCB EDGE No.1 7.9 No.5 2.15 Micro B - Standard (Bottom mount), Shell through hole All dimensions: mm Part Number CL No. Packaging RoHS ZX62D-B-5P8 242-0034-0 2,000 pieces per reel YES BRecommended PCB mounting pattern 4.85 2.6 0.65 0.4 D) No.1 1.05(LAND) 0.65(TH) No.5 1.35 AN 7.5 PCB EDGE 2.8 5 2.5 0.5 4.1 5.2 7.2 9.4 1.3 R0.325(TH) 0.5(TH) 0.6 2.75 NO CONDUCTIVE TRACES (TH) .3 R0 1.5(TH) 1.9 2.9 R0.5(LAND) R0.325(TH) No.1 4.85 7.2 0.8 5(L 3.35 .52 0.2 0.1 1.25(LAND) 0.85(TH) R0 2.15 2.9 No.5 All dimensions: mm 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. ZX SeriesMicro-USB connectors meeting requirements ofyour USB 2.0sales Standard Receptacles Micro B - Reverse (Top mount) Shell SMT Part Number CL No. Packaging RoHS ZX62R-B-5P 242-0028-8 2,000 pieces per reel YES BRecommended PCB mounting pattern 8.3 4.1 2.6 1.3 No.1 1.35 0.5 2.9 3.9 5.6 6.6 9.8 0.6 No.1 5 2.5 No.5 1.45 1.9 2 3.35 0.4 0.43 No.5 NO CONDUCTIVE TRACES 7.5 8.8 2.15 All dimensions: mm Micro B - Drop-in (Mid-mount), Shell SMT Part Number CL No. Packaging RoHS ZX62M-B-5P 242-0024-7 2,000 pieces per reel YES 11.5 7.5 2.74 4.3 5 5.3 2.4 4.8 1.9 3.6 1.05 0.6 0.4 1.3 2.6 6.9 7.8 8.8 12 PCB EDGE 1.25 2.4 1.5 1.4 No.5 3 7.15 4.3 0. 5.15 1.9 7.5 C .4 R0 No.1 4.7 2 1.23 BRecommended PCB mounting pattern No.5 No.1 0.25 1.3 2.6 4.7 All dimensions: mm 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.requirements Please check the products status onStandard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ZX SeriesMicro-USB connectors meeting of USB 2.0 Receptacles Micro AB - Standard (Bottom mount), Shell SMT Part Number CL No. Packaging RoHS ZX62-AB-5PA 242-0045-7 2,000 pieces per reel YES 8.3 4.1 2.6 1.3 No.1 No.5 3.35 1.6 0.4 1.35 BRecommended PCB mounting pattern 0.6 5 2.5 2.8 1.9 0.5 4.3 6.2 9.8 1.45 7.5 PCB EDGE NO CONDUCTIVE TRACES No.1 No.5 8.8 2.15 Micro AB - Standard (Bottom mount), Shell through hole All dimensions: mm Part Number CL No. Packaging RoHS ZX62D-AB-5P8 242-0027-5 2,000 pieces per reel YES 0.4 No.1 1.05(LAND) 0.65(TH) NO CONDUCTIVE TRACES No.5 1.35 1.5 1.7 0.325 0.5 6 0.5 4.1 5.2 7.35(TH) 9(TH) 9.4 0.6 5 2.025 3.125 2.5 1.3 1.5(TH) 1.9 R0.5(LAND) PCB EDGE 7.5 2.625 R0.25(TH) 2.8 R0.3(TH) No.1 4.45 8.35 0.6 0.85(TH) R0.45(LAND) 4.45 2.6 1.3 3.475 3.125 1.25(LAND) BRecommended PCB mounting pattern No.5 All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. ZX SeriesMicro-USB connectors meeting requirements ofyour USB 2.0sales Standard Receptacles Micro AB - Reverse (Top mount), Shell SMT Part Number CL No. Packaging RoHS ZX62R-AB-5P 242-0035-3 2,000 pieces per reel YES BRecommended PCB mounting pattern No.5 NO CONDUCTIVE TRACES 8.3 4.1 2.6 1.3 No.1 1.45 0.43 0.5 0.6 PCB EDGE 5 .4 R0 4- 2.9 0.85 4.75 6.6 9.8 7.5 2.5 1.9 3.35 1.6 1.35 0.4 No.5 No.1 8.8 2.15 Micro AB - Reverse (Top mount), Shell through hole All dimensions: mm Part Number CL No. Packaging RoHS ZX62RD-AB-5P8 242-0025-0 2,000 pieces per reel YES BRecommended PCB mounting pattern R0.45(LAND) No.1 R0.2MAX 1.05(LAND) 0.65(TH) 1.35 1.5 1.7 NO CONDUCTIVE TRACES 7.5 No.1 0.6 5 2.5 No.5 R0 .5( LA ND ) 4.45 8.35 0.6 1.9 4.75 0.85 1.5(TH) 2.9 1.3 (TH) (0.325) R0.3 (0.5) 3.475 3.125 0.555 0.4 2.625 No.5 1.25(LAND) 0.85(TH) R0.25(TH) 9.4 9(TH) 7.35(TH) 6.6 4.45 2.6 1.3 2.025 3.125 All dimensions: mm PCB EDGE 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.requirements Please check the products status onStandard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ZX SeriesMicro-USB connectors meeting of USB 2.0 Plugs - assembled (not-terminated, without overmold) Components ZX40 - Direct wire soldering ZX40-*-SLDA Cover-top ZX40-*-5S-UNIT Assembly (insulator/contacts/lock) *No PCB required ZX40-SLDB Cover-bottom ZX10 - PCB wire soldering ZX10-B-SLDA Cover-top ZX10-B-5S-UNIT Assembly (insulator/contacts/lock) *SMT PCB termination ZX10-SLDB Cover-bottom ZX20 - PCB wire soldering ZX20-*-SLDC Cover ZX20-*-5S-UNIT Assembly (insulator/contacts/lock) *Straight through hole PCB termination ZX64 - PCB wire soldering ZX64-*-SLDA Cover-top ZX64-*-5S-UNIT Assembly (insulator/contacts/lock) *Right angle through hole PCB termination ZX64-SLDB Cover-bottom 8 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. ZX SeriesMicro-USB connectors meeting requirements ofyour USB 2.0sales Standard Plugs Micro B - Assembly (insulator/contacts/lock) - Direct wire soldering Part Number CL No. RoHS ZX40-B-5S-UNIT(12) 242-0002-4-12 YES 14.1 Contact HRS for Cable Termination Procedure Manual. 7.9 No.1 4.2 No.5 All dimensions: mm Micro B - Component, Cover-top - Direct wire soldering CL No. Packaging RoHS ZX40-B-SLDA 242-0003-7 4,000 pieces per reel YES 22.6 Part Number 6.85 1.8 8 All dimensions: mm 9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.requirements Please check the products status onStandard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ZX SeriesMicro-USB connectors meeting of USB 2.0 Plugs 16.2 16.2 Micro A, Micro B - Component, Cover-bottom - Direct wire soldering 8 8 All dimensions: mm ZX40-SLDB(3.3) ZX40-SLDB Part Number CL No. ZX40-SLDB 242-0004-0 ZX40-SLDB(3.3) 242-0023-4 Packaging Cable dia. 4,000 pieces per reel O3.8 O3.3 RoHS YES 22.6 Assembled 6.85 1.8 4.75 8.6 All dimensions: mm 10 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. ZX SeriesMicro-USB connectors meeting requirements ofyour USB 2.0sales Standard Plugs Micro B - Assembly (insulator/contacts/lock) - Right angle through hole PCB wire soldering (non-direct) Part Number CL No. Packaging RoHS ZX10-B-5S-UNIT(12) 242-0030-0-12 1,500 pieces per reel YES Contact HRS for Cable Termination Procedure Manual. 2.6 A No.1 O0 .5 5 (T H) 4 1.25 0.95 0.45 0.15 1.55 0.95 3.35 7.6 No.5 5- D) AN L ( .9 O0 5- No.5 1.3 X X 12.05 *PCB required (not supplied) Max. thickness: 0.6mm 7.3 3.05 2.6 0.79 0.3 0.45 0.95 1.25 A PCB mounting pattern No.1 A-A 1 1.3 0.15 Micro B - Component, Cover-top - Right angle through hole All dimensions: mm CL No. Packaging RoHS ZX10-B-SLDA 242-0031-2 4,500 pieces per reel YES 23.4 Part Number 6.85 1.8 7.7 All dimensions: mm 11 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.requirements Please check the products status onStandard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ZX SeriesMicro-USB connectors meeting of USB 2.0 Plugs Micro B - Component, Cover-bottom - Right angle through hole CL No. Packaging RoHS 242-0032-5 4,500 pieces per reel YES 16.95 Part Number ZX10-SLDB(3.3) 7.7 All dimensions: mm 23.4 Assembled 6.85 1.8 4.4 8.1 All dimensions: mm 12 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. ZX SeriesMicro-USB connectors meeting requirements ofyour USB 2.0sales Standard Plugs Micro B - Assembly (insulator/contacts/lock) - Straight through hole PCB wire soldering (non-direct) Part Number CL No. RoHS ZX20-B-5S-UNIT(12) 242-0012-8-12 YES Contact HRS for Cable Termination Procedure Manual. 1 1.4 2.6 1.3 5-0.15 PCB mounting pattern (Th 0.7 No.5 1(Land) hro (Lan 10.25 R0 0.35 1.55 No.1 d) .3(T 8.2 7.9 No.5 3.975 2.6 1.6(Land) 1.55 e) hol ugh 1.3 R0.5 1.2(Through hole) 4.2 5-O ) nd 0.6(Through hole) La .1( No.1 rou O1 5- gh ho le) 12.2 *PCB required (not supplied) Max. thickness: 0.6mm All dimensions: mm Micro B - Component, Cover - Straight, through hole CL No. Packaging RoHS 242-0022-1 4,000 pieces per reel YES 12.1 8.2 2-0.2 1.1 Part Number ZX20-B-SLDC Assembled 8.2 2.6 1.3 2-0.2 1 1.4 5-0.15 6.85 6.85 Assembly (insulator/contacts/lock) 0.6 12.2 1.8 8 Cover 0.6 4.4 1.8 0.35 1.55 8.4 All dimensions: mm 13 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.requirements Please check the products status onStandard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ZX SeriesMicro-USB connectors meeting of USB 2.0 Plugs Micro B - Assembly (insulator/contacts/lock) - Right angle SMT Part Number CL No. RoHS ZX64-B-5S-UNIT(14) 242-0009-0-14 YES Contact HRS for Cable Termination Procedure Manual. 2.6 1.3 16.1 5-0.15 PCB mounting pattern 1.5 6 *PCB required (not supplied) Max. thickness: 1.0mm 7.9 1.3 No.5 2.6 No.1 No.1 3.7 0.35 1.1 0.5 No.5 6.8 All dimensions: mm Micro B - Component, Cover-top - Right angle SMT CL No. Packaging RoHS 242-0013-0 4,000 pieces per reel YES 24.7 Part Number ZX64-B-SLDA 6.85 1.8 8 All dimensions: mm 14 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. ZX SeriesMicro-USB connectors meeting requirements ofyour USB 2.0sales Standard Plugs Micro B - Component, Cover-bottom - Right angle SMT CL No. Packaging RoHS ZX64-SLDB 242-0049-8 4,000 pieces per reel YES 18.25 Part Number 8 Assembled 24.7 All dimensions: mm 4.1 8.4 Assembly (insulator/contacts/lock) Cover-top 1.8 6.85 Cover-bottom All dimensions: mm 15 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.requirements Please check the products status onStandard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ZX SeriesMicro-USB connectors meeting of USB 2.0 Plugs Micro B - Component, Shell/cover - Right angle SMT Part Number CL No. Packaging RoHS ZX64-B-SLDC 242-0018-4 4,000 pieces per reel YES Shell/cover, without cable clamp This shell/cover does not require ZX64-SLDB. 6.85 16.1 1.8 8 16.1 Assembled 6.85 Assembly (insulator/contacts/lock) Cover-top 1.8 4.1 8.4 Cover-bottom All dimensions: mm 16 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. ZX SeriesMicro-USB connectors meeting requirements ofyour USB 2.0sales Standard Plugs Micro A - Assembly (insulator/contacts/lock) - Direct wire soldering Part Number CL No. RoHS ZX40-A-5S-UNIT 242-0010-2 YES 12.4 Contact HRS for Cable Termination Procedure Manual. Contacts 7.9 No.1 4.2 No.5 Insulator body (color grey) All dimensions: mm Micro A - Component, Cover-top - Direct wire soldering CL No. Packaging RoHS ZX40-A-SLDA 242-0011-5 4,000 pieces per reel YES 22.6 Part Number 6.85 1.8 8 All dimensions: mm 17 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.requirements Please check the products status onStandard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ZX SeriesMicro-USB connectors meeting of USB 2.0 Plugs 16.2 16.2 Micro A, Micro B - Component, Cover-bottom - Direct wire soldering 8 8 All dimensions: mm ZX40-SLDB Part Number CL No. ZX40-SLDB 242-0004-0 ZX40-SLDB(3.3) 242-0023-4 ZX40-SLDB(3.3) Cable dia. Packaging 4,000 pieces per reel RoHS O3.8 YES O3.3 22.6 Assembled 6.85 Assembly (insulator/contacts/lock) Cover-top 1.8 4.75 8.6 Cover-bottom 18 All dimensions: mm The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. ZX SeriesMicro-USB connectors meeting requirements ofyour USB 2.0sales Standard Plug-Vertical, cradle mount, Shell through hole Micro B, with lock 6.65 2-0.2 2.6 1.3 5-0.15 No.1 CL No. Packaging RoHS ZX80-B-5S 242-0017-1 100 pieces YES 6 Part Number 2.5 0.7 R1. 3.52 2.32 0.37 3.15 No.5 1 1.86 2.78 2.42 1.88 6.85 8.55 7.1 16.55 20.55 13 1.15 All dimensions: mm Micro B, without lock 6.65 2-0.2 2.6 1.3 5-0.15 No.1 CL No. Packaging RoHS ZX80-B-5SA 242-0019-7 100 pieces YES BPCB mounting pattern 25 13 0.7 1.15 .55 0.4 1.3 Contact No.1 0.5(Through hole) 1.1(Land) 2.6 6.65 16.55 Contact No.5 1.86 R0 2.2(Land) 8- 1.6(Through hole) 2.2 2.9 3.15 0.37 e) ol H ( .2 O2 . R0 8- 2- 1.1(Land) 0.5(Through hole) 2.5 7.1 16.55 20.55 1.3(Through hole) 1.9(Land) Part Number 6 R1. 3.52 2.32 0.37 3.15 No.5 1 1.86 2.78 2.42 1.88 6.85 8.55 All dimensions: mm 19 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.requirements Please check the products status onStandard the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ZX SeriesMicro-USB connectors meeting of USB 2.0 BPackaging Specifications Embossed carrier tape dimensions Unreeling direction 12 C 0.5 .5 D O1 2 3 O1 1.75 4 Reel Dimensions Unreeling direction O3 A B 80 1.8 Part Number ZX62-B-5PA ZX62-AB-5PA ZX62M-B-5P Other A dimension 24 24 24 16 Part Number C dimension D dimension ZX62-B-5PA 30.4 24.4 ZX62-AB-5PA 30.4 24.4 ZX62M-B-5P 30.4 24.4 Other 22.4 16.4 Note : Tape and reel packaging (2,000 pieces/reel). Order by number of reels. B dimension 11.5 11.5 11.5 7.5 BRecommended Temperature Profile - Receptacles Using lead-free solder paste HRS test condition (c) Solder composition :Paste,96.5%Sn/3.0%Ag/0.5%Cu 250 Test board :Glass epoxy 35mm35mm0.8mm thick 250c The temperature profile is based on the left conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Contact your solder paste and equipment manufacturer for specific recommendations. 220cmin. 200 180c 150 150c 100 120 S 70 S 50 (S) Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. BPrecautions 1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating. 2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable. 3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected. 4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function. (R) 20 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of 07/2008. Contents are subject to change without notice for the purpose of improvements.