DATA BRIEF
February 2005 Version 1.0 1/3
ST7-DVP3
Low Cost, Real Time Emulator Series for ST7
®
The ST7-DVP3 series emulator is the third
generation of low cost emulators, providing
powerful, affordable development solutions that
included everything you need for real-time
emulation, In-Circuit Debugging (ICD) and In-
Circuit Programming (ICP) of your ST7
microcontroller.
In combination with ST7 Visual Develop (STVD7)
and ST7 Visual Programmer (STVP7), the DVP3
series emulators allow you to build and debug your
application, then program it to the ST7 on your
application board. STVD7 and STVP7 are free
software tools developed by ST Microelectronics.
The ST7-DVP3 series emulators offer start-to-finish
control of application development by providing
both emulation and In-Circuit Communication (ICC)
configurations from a single platform.
In the emulation configuration, the DVP3 emulator
and STVD7 software allow you to debug your
program while connected to your application board
in place of your target ST7.
The ICC configuration allows you to In-Circuit
Debug (ICD) your application while it runs on the
ST7 on your application board, and to In-Circuit
Program (ICP) your ST7 microcontrollers.
Emulator Architecture
For affordability and flexibility, the DVP3 series
emulators have a modular design based on a
common Main Emulation Board and ST7 family-
specific Target Emulation Boards.
Main Emulation Board – Provides the
communication interface with the host PC via
parallel or USB connection when working in both
the Emulation and ICC configurations. Any Main
Emulation Board for the DVP3 series can be
adapted to emulate a supported ST7 with the
appropriate Target Emulation Board and
Connection kit. This board also includes the
system’s ICC connection, which allows you to
connect to the ST7 on your application board via a
10-pin ICC cable and an ICC connector that you
install on your application board.
Target Emulation Board – Allows the system to
emulate a specific family of ST7 devices. It
connects to your application board via the adapters
and sockets furnished in Connection kits, which are
specific to the package of the target device.
Connection Kits – Provide the package-specific
adapters and sockets/connectors that allow
connection to your application board in place of the
target ST7.
ST7 Visual Develop – Integrated development
environment (IDE) that runs on the host PC
connected to the emulator and allows you to build
and debug your application software and then
program it to your target ST7.
ST7 Visual Programmer – Software programming
interface that runs on the host PC connected to the
emulator and allows you to program the application
to your ST7.
Figure 1: ST7-DVP3 Emulator
Parallel Cable
USB Cable
Power Supply
10-pin ICC Cable
Device Adapters
ST7-DVP3
2/3
Emulation Features
In the emulation configuration the ST7-DVP3 emulator provides a complete range of debugging features,
including:
Ordering a DVP series emulator
Because of the modularity of the DVP3 series emulators it is possible to order just the components that you
need to emulate your target ST7, including:
Product selectors to help you select the appropriate DVP3 series emulator and Adapter kit for your target
ST7 are available at
www.st.com/mcu
.
For more information...
The following documents are available for free download from our internet site:
ST7 Visual Develop User Manual
- Information and tutorials to help you build and debug your application
software and program it to your ST7 using the STVD7 Integrated Development Environment and an ST7-
DVP3 series emulator.
ST7 Visual Programmer online help
- Information to help you program your application to your ST7 using
this Windows-based programming software and an ST7-DVP3 series emulator.
ST7-DVP3 Emulator User Manual
- Information about setting up an ST7-DVP3 series emulator in the
emulation or ICC configuration. This manual provides information that is common to all emulators in the
DVP3 series.
ST7xxxx-DVP3 Probe User Guide
- Information about connecting the DVP3 emulator to your application
board in the emulation configuration. These documents provide information that is specific to each type of
DVP3 emulator (ST7MDTxx-DVP3 emulator).
ST7xxxx Datasheet
- Complete information about the features of your target ST7 microcontroller.
●Real-time debugging
●Up to 64 Kbytes of breakpoints with counter and
condition
●Output trigger
●External input trigger
●512 record trace with filtering capability
●Emulation at 3.3 or 5 V
●Programmable Clock frequency up to 16 MHz
●Hardware Test feature for emulator
troubleshooting
●DVP3 emulator –
ST7MDTxx-DVP3
part
numbers are for ordering an emulator and target
emulation board. DVP3 emulators do not include
connection kits for all supported packages.
●Target Emulation Board (TEB) – when
adapting a DVP3 to emulate another ST7 family,
the
ST7MDTxx-TEB/DVP
part numbers are for
ordering the appropriate TEB. The TEB does not
include connection kits for all supported
packages.
●Adapter kit –
ST7MDTxx-xxx/DVP
part numbers
are for ordering the package-specific
Adapter
kits
for a DVP3.
Note: Sockets are provided in the connection kits.
However, socket part numbers (AS-xxxx)
can be used to order additional or
replacement sockets as required.
ST7MDTxx-DVP3
ST7MDTxx-TEB/DVP
ST7MDTxx-xxx/DVP
Main Emulation Board
Target Emulation Board
Adapter
kit
3/3
ST7-DVP3
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are
subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products
are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics.
All other names are the property of their respective owners
© 2005 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
