28-21SURC/S530-A3/TR8 - Everlight Electronics Co Ltd

EVERLIGHT ELECTRONICS CO.,LTD

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 9

Device No. : SZDLE-281-005 Prepared date:24-May-2005 Prepared by: Aihua hong

Technical Data Sheet

1.4 mm Height Subminiature , Axial Flat Top View LED

28-21SURC/S530-XX/TR8

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-free.

․The product itself will remain within RoHS complaint versio

Descriptions

․The 28-21 SMD taping is much smaller

than leaded components .Thus enable

smaller board size. Higher packing density.

Reduced storage space and finally smaller

equipment to be obtained.

․Besides, light weight makes them

ideal for miniature applications.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide Chip

Part No. Material Emitted Color

Lens Color

28-21SURC/S530-XX/TR8 AlGaInP Brilliant Red Water Clear

EVERLIGHT ELECTRONICS CO.,LTD

28-21SURC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 9

Device No. : SZDLE-281-005 Prepared date:24-May-2005 Prepared by: Aihua hong

Package Outline Dimensions

Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD

28-21SURC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 9

Device No. : SZDLE-281-005 Prepared date:24-May-2005 Prepared by: Aihua hong

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF 25 mA

Peak Forward Current

(Duty 1/10 @1KHz) I

FP 60 mA

Power Dissipation Pd 60 mW

Electrostatic Discharge ESD 2000 V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +100 ℃

Soldering Temperature Tsol Reflow Soldering : 260 ℃for 10 se

c

Hand Soldering : 350 ℃ for 3 sec.

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol

Chip Rank MIN. TYP. MAX. Unit Condition

A2 11 26 ----

A3 25 38 ----

A4 35 51 ----

A5 42 64 ----

Luminous Intensity IV

A6 50 77 ----

mcd

Viewing Angle 2θ1/2 ---- ---- 150 ---- deg

Peak Wavelength λp ---- ---- 632 ---- nm

Dominant Wavelength λd ---- ---- 624 ---- nm

Spectrum Radiation

Bandwidth △λ ---- ---- 20 ---- nm

Forward Voltage VF ---- ---- 2.0 2.4 V

IF=20mA

Reverse Current IR ---- ---- ---- 10

μA VR=5V

Notes:

1.Tolerance of Luminous Intensity ±10%

2.Tolerance of Dominant Wavelength ±1nm

EVERLIGHT ELECTRONICS CO.,LTD

28-21SURC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 9

Device No. : SZDLE-281-005 Prepared date:24-May-2005 Prepared by: Aihua hong

Typical Electro-Optical Characteristics Curves

EVERLIGHT ELECTRONICS CO.,LTD

28-21SURC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 9

Device No. : SZDLE-281-005 Prepared date:24-May-2005 Prepared by: Aihua hong

xxxxxx

xxxxxxxxxxxx

xxxx

xxxxxxxx

RoHS

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel & Carrier Tape Dimensions

EVERLIGHT ELECTRONICS CO.,LTD

28-21SURC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 9

Device No. : SZDLE-281-005 Prepared date:24-May-2005 Prepared by: Aihua hong

Loaded quantity per reel 1000 PCS/reel

Moisture Resistant Packaging

Label Aluminum moisture-proof bag Desiccant Label

Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD

28-21SURC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 9

Device No. : SZDLE-281-005 Prepared date:24-May-2005 Prepared by: Aihua hong

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level : 90 %

LTPD : 10 %

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260℃±5℃

Min. 5 sec. 6 Min. 22 Pcs. 0/1

2 Temperature Cycle

H : +100℃ 15 min.

∫ 5 min.

L : -40℃ 15 min. 300 Cycles 22 Pcs. 0/1

3 Thermal Shock

H : +100℃ 5 min.

∫ 10 sec.

L : -10℃ 5 min. 300 Cycles 22 Pcs. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 Pcs. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 Pcs. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 Pcs. 0/1

7 High Temperature /

High Humidity 85℃/ 85% RH 1000 Hrs. 22 Pcs. 0/1

EVERLIGHT ELECTRONICS CO.,LTD

28-21SURC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 9

Device No. : SZDLE-281-005 Prepared date:24-May-2005 Prepared by: Aihua hong

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

EVERLIGHT ELECTRONICS CO.,LTD

28-21SURC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 9

Device No. : SZDLE-281-005 Prepared date:24-May-2005 Prepared by: Aihua hong

4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3

seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more

intervals, and do soldering of each terminal. Be careful because the damage of the product is often

started at the time of the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed

beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com