3M Personal Safety 3MTM Protective Apparel The suit that leaves you free to focus on the job. Introduction At 3M we have a select and high quality range of products which help protect against many hazards. The range of 3MTM Protective Apparel includes a variety of features, from fabrics with specialized treatments for enhanced wear and added protection, to breathable back panels for increased comfort. Our specialists can work closely with you, to help you identify hazards and support you in protecting your workers against them. For additional information: Call Technical Assistance: 1-800-243-4630 Call Customer Care Center: 1-800-328-1667 Visit website: 3M.com/protectiveapparel View brochure: 3M.com/pabrochure 3M Personal Safety 3MTM Protective Apparel | 3 Contents Selection4-5 Protection Types 4 Additional Standards 5 Product Features 6 Materials 6 Selection Flow Chart 7 3MTM Protective Coveralls 8-9 Accessories10 Selection Guide by Application 11-12 Summary: Materials and design 12 4 | 3M Personal Safety 3MTM Protective Apparel Selection There are many tests and standards that apply to 3MTM Protective Coveralls and selection can be a daunting task. The following section outlines the different options available to help you select the right product for your employees. Protection Types Depending on the materials and construction, protective coveralls can be designed for either hazardous applications (certified to CE Category III) or non-hazardous applications. Products for hazardous applications can be tested and certified to any of six different "Type" standards, providing guidance on suitability of use. Category CE Category III Symbol Protection Type Standard 3M Product Code Type 1 Gas Protection N/A Type 2 Non-Gas Protection N/A Type 3 Liquid Jet Protection EN 14605 (EN ISO 17491-3) HIGH 4570 PROTECTION Type 4 Liquid Spray Protection EN 14605 (EN ISO17491-3) Type 5 Particle Protection EN ISO 13982-1 Type 6 Limited Liquid Splash Protection EN 13034 (EN ISO 17491-4) 4570, 4565 4570, 4565, 4545, 4540+, 4535, 4530, 4520, 4515, 4510 LOW 3M Personal Safety 3MTM Protective Apparel | 5 Additional Standards Some 3M protective coveralls and their materials are approved to additional standards* for specialized applications. Protection against nuclear particles (EN 1073-2) Protection against nuclear particles (EN 1073-2) with exception of EN863 puncture resistance Total Inward Leakage Class 1 Total Inward Leakage Class 2 Anti-static coating (EN 1149-5) Refer to User Instructions for further information on anti-static compliance Protection against micro-organisms (EN 14126) with exception of ISO 16604 (see table below) Protection against micro-organisms (EN 14126) Tests for Protection against micro-organisms 4510 4545 4565 4570 ASTM 1671 bloodborne pathogen penetration resistance -- -- -- Pass ASTM 1670 synthetic blood penetration resistance -- -- -- Pass ISO 16603 assesses resistances to penetration under pressure by synthetic blood (visual assessment) Class 4 of 6 Class 4 of 6 Class 6 of 6* Class 6 of 6* ISO 16604 models resistance to viral penetration under pressure (biological assay) Unclassified Unclassified Unclassified Class 6 of 6* ISO 22610 assesses resistances to wet bacterial penetration during mechanical contact Class 6 of 6* Class 6 of 6* Class 6 of 6* Class 6 of 6* ISO 22611 determines resistance to penetration by aerosols containing bacteria Class 3 of 3* Class 3 of 3* Class 3 of 3* Class 3 of 3* ISO 22612 assesses resistance to dry microbial penetration using talc contaminated with spores Class 3 of 3* Class 3 of 3* Class 3 of 3* Class 3 of 3* *P lease refer to product user instructions and packaging for more information. An "*" denotes highest level of performance according to test method. 6 | 3M Personal Safety 3MTM Protective Apparel Product features Sizes M - 4XL 3M protective coveralls can offer a variety of benefits depending on your needs. The illustration below highlights some of the features available. 3-Panel hood Provides improved fit and comfort Whole suit tested Simulated workplace conditions that test coverall performance as designed and constructed, not just fabric tests. Breathable back panels For comfort in hot environments. Two-way zip Sealable storm flap for protection from contaminants Elastic waist Helps increase comfort and mobility Knitted cuffs For increased wearer comfort Anatomical design and fit For optimal wear, coverage and comfort Extra material in arms and legs Helps increase freedom of movement Materials The following is a guide that offers a comparison between the materials used in the 3MTM Protective Coverall range. For full penetration and permeation data please contact Technical Assistance: 1-800-243-4630. SMS Microporous PE Laminate Spunbound Meltblown Spunbound are robust breathable fabrics, designed to offer a good barrier against hazardous particles and limited liquid splashes. Polypropylene PE laminate is designed to offer a good barrier against hazardous particles and limited liquid splashes, while the micropores allow for some breathability. Protective Coveralls 4515, 4520, 4530 and back panels of Protective Coveralls 4535 and 4540+ Protective Coveralls 4510 and 4545. Also white material of Protective Coveralls 4535 and 4540+ Non-microporous PE Laminate Designed to offer a very good barrier against hazardous particles and certain liquid splashes and sprays. Protective Coverall 4565 Multi-Layer Non-Microporous PE Laminate Designed to offer an excellent barrier against hazardous particles and certain liquid splashes, sprays and jets. Protective Coverall 4570 3M Personal Safety 3MTM Protective Apparel | 7 Selection flow chart WARNING: This product selector is intended to provide guidance on key features of the 3M product range. Product selection should always be made after a risk assessment by a competent person with knowledge of the actual working conditions and limitations of the PPE. Do you require protection from liquids or particles? Need flame spread resistance? Particles (Type 5) Yes 4530 No Liquids Splash (Type 6) Type of exposure Jets (Type 3) Suggested Option Taped seams? Additional breathability required? Spray (Type 4) No Is low linting critical? No Anti-static required? Yes No Yes Yes No Yes Suggested Option Suggested Option Suggested Options Suggested Options Suggested Option Suggested Options Suggested Option Suggested Option 4570 4565 4535 4540+ 4510 4545 4565 4510 4565 4515 4520 *The fabric complies with ISO 14116:2008 for limited flamespread index 1 (must be worn over and index 2 or 3 garment and must not be worn next to skin). WARNING: Cuffs and zipper are not flame resistant. Cuffs must be worn under gloves. Review Product Selection Guide Important Notice This guide is only an outline. It should not be used as the only means for selecting protective clothing. Before using any protective clothing, the wearer must read and understand the user instructions for each product. Specific country legislation must be observed. If in doubt, contact a safety professional. Selection of the most appropriate PPE will depend on the particular situation and should only be made by a competent person knowledgeable of the actual working conditions and the limitations of PPE. Final determination as to the suitability of these products for a particular situation is the employer's responsibility. This information is subject to revision at any time. Always read and follow all User Instructions supplied with your 3MTM Protective Coveralls in order to ensure correct operation. If you have questions contact 3M Technical Service. LIMITATION OF LIABILITY: Except as provided above, 3M shall not be liable or responsible for any loss or damage, whether direct, indirect, incidental, special or consequential arising out of the sale, use or misuse of 3M PSD products, or the user's inability to use such products. THESE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE. WARRANTY: 3M will replace or refund the purchase price of any Personal Safety Division product found to be defective in material, manufacture, or not in conformance with any expressed warranty. THIS WARRANTY IS EXCLUSIVE 8 | 3M Personal Safety 3MTM Protective Apparel 3MTM Protective Coveralls 3MTM Protective Coverall 4510 Designed to offer cost effective protection against hazardous dusts and limited liquid splashes. * E lasticized hood, ankles, cuffs and waist * 2 way zip with storm flap * U ltra low linting * C ollared and hooded available * Anti-static Limited Splash Particle Antistatic Limited Microorganism 3MTM Protective Coverall 4515 Made from lightweight and extremely breathable material and is designed to offer protection against hazardous dusts and limited liquid splashes. * E lasticized hood, cuffs, ankles and waist * 2 way zip with storm flap * L ow linting 4515 Limited Splash Particle 3MTM Protective Coverall 4520 Made from lightweight and extremely breathable material and is designed to offer protection against hazardous dusts and limited liquid splashes. * E lasticized hood, ankles and waist * 2 way zip with sealable tab on storm flap * 3 -panel hood * K nitted cuffs * L ow linting * C ollared and hooded available * Anti-static Limited Splash Particle Antistatic 3M Personal Safety 3MTM Protective Apparel | 9 3MTM Protective Coverall 4530 3MTM Protective Coverall 4545 Made from extremely lightweight and breathable material and is designed to offer protection against hazardous dusts and limited liquid splashes. The fabric complies with ISO 14116:2008 for limited flamespread index 1 (must be worn over an index 2 or 3 garment and must not be worn next to skin). Made from soft, lightweight, yet durable fabric which provides a good barrier to hazardous particles and limited liquid splash. Supplied in vacuum packaging. * * * * Elasticized hood, ankles and waist 2 way zip with fully sealable storm flap 3-panel hood Anti-static Limited Splash Particle * K nitted cuffs * Low linting * C ollared and hooded available Antistatic * * * * Elasticized hood, ankles, and waist 2 way zip with fully sealable storm flap 3-panel hood Knitted cuffs * Ultra low linting * Anti-static Limited Splash Antistatic Particle Limited Microorganism 3MTM Protective Coverall 4535 3MTM Protective Coverall 4565 Provides a superb balance of comfort and protection. The microporous PE laminate at the front of the garment is designed to offer a good barrier to limited liquid splash, while the large SMMMS breathable back panel helps increase wearer comfort. Made from a soft lightweight fabric with taped seams, providing a very good barrier to hazardous particles and limited liquid splash and spray. * Elasticized hood, ankles and waist * 2 way zip with storm flap * Knitted cuff * Low linting Limited Splash Particle * Anti-static Antistatic * Elasticized hood, ankles and waist * 2 way zip with fully sealable storm flap * 3-panel hood * Knitted cuffs * Ultra low linting * Anti-static Limited Particle Splash Spray Antistatic Limited Microorganism 3MTM Protective Coverall 4540+ 3MTM Protective Coverall 4570 A highly versatile protective coverall, which is mostly made from a unique microporous PE laminate, designed to be softer and drape better over the body. It is designed to offer a good barrier to particles and limited liquid splash but it also features a breathable SMMMS back panel. Designed to offer a barrier to hazardous particles and certain liquid splashes, sprays and jets. * Elasticized hood, ankles and waist * 2 way zip with fully sealable storm flap * 3-panel hood * Knitted cuffs * L ow linting * Collared and hooded available * Anti-static Limited Splash * , , Particle Antistatic , see page 5 for details. * Elasticized hood and ankles * Double front closing system with large ring zip pull for easy wear * 3-panel hood * Elasticized cuffs with thumb loops * Ultra low linting * Anti-static Limited Particle Spray Splash Jet Nuclear Anti- Microstatic organisms 10 | 3M Personal Safety 3MTM Protective Apparel Accessories Overboot Covers 3MTM Overboot 450 Reduced Slip Sole 3MTM Overboot 440 Standard Sole * M ade from the same microporous PE laminate material as the protective coverall 4535 * Elastic at the calf * Universal size with ties to help provide a good fit * L aminated material ties to minimize particle shed and contamination in particle restricted environments such as clean rooms * Overboot 450 features a reduced slip sole * Anti-static Overshoe Covers 3MTM Overshoe 402 * O ffers a general barrier to non-hazardous substances * R educed slip print on base * E lastic at ankle 3MTM Overshoe 442 * M ade from the same microporous PE laminate material as the protective coverall 4535 * E lastic at ankle * A nti-static Oversleeves 3MTM Oversleeve 444 * M ade from the same laminated material as the 3MTM Protective Coverall 4510 * O ffers a general barrier to non-hazardous substances * 1 6 inch/40.5cm protection covering wrist to top of arm * Elastic finish on top end Lab Coats 3MTM Lab Coat 4440 Head Protection 3MTM Overhood 446 * M ade from the same * M ade from the same laminated material as the protective coverall 4510 * D rapes over the shoulders offering microporous PE laminate material as the 3MTM Protective Coverall 4535 excellent coverage * K nitted cuffs * O ffers a barrier against non-hazardous particles and light liquid splashes * Z ip fastener 3MTM Hair Net 407 * D esigned to help prevent hair from contaminating the working environment * U niversal size * A nti-static treatment N.B. 3M Accessories (excluding lab coats) are not CE marked and are not intended as PPE for use in hazardous environments. 3M Personal Safety Selection guide by application 3MTM Protective Apparel | 11 Suggested Possible alternative Click on photos to view web content. 4510 Limited Splash Particle Antistatic Limited Microorganism 4515 Limited Splash Particle 4520 Limited Splash Particle Antistatic 4530 Limited Splash Particle 4535 Limited Splash Particle Antistatic Antistatic 4540+ Limited Splash Particle Antistatic 4545 Limited Splash Particle Antistatic Limited Microorganism 4565 Limited Splash Particle Spray Limited Microorganism Sizes Limited Splash Particle Spray Jet Nuclear Antistatic Antistatic Certification** Material weight 4570 Microorganisms organism 1.38 oz/yd2 (47gsm) 1.47 oz/yd2 (50gsm) 1.26 oz/yd2 (43gsm) 1.59 oz/yd2 (54gsm) 1.62 oz/yd2 (55gsm) 1.44 oz/yd2 (49gsm) 1.44 oz/yd2 (49gsm) 1.44 oz/yd2 (49gsm) 2.71 oz/yd2 (92gsm) M-4XL M-4XL M-4XL M - 4XL M - 4XL M-4XL M-4XL M-4XL S - 4XL Colors * Abatement/remediation Exposure to radioactive particles Mold remediation/ mold spores Asbestos inspection, site preparation Asbestos removal * Agriculture Fertilizer application (dry/granular) Animal waste (solid) Pesticide spraying3 * Emergency response/biohazard Bloodborne pathogens Hazardous biological aerosol * Pharmaceutical/clean room Pharmaceutical processing Handling powders Clean rooms * Painting Spray Painting Resin application Fiberglass application continues on back page > ** See pages 4-5 for additional overview and technical data sheets at 3M.com/protectiveapparel for fuller specifications. Click on photos to view web content. Product Guide (continued) 4510 4515 4520 4530 4535 4540+ 4545 4565 4570 * Cleaning and maintenance Dirt Machine or vehicle maintenance Light duty building maintenance Grease (general) Light duty warehousing, janitorial * General industry Electronics/circuit board assembly 1 Fiberglass/cellulose insulation installation Food processing General powder handling Lime handling Woodworking Non-hazardous aerosols (sprays) Non-hazardous liquids Non-hazardous solids Coal dust * Oil & gas/chemical Maintenance (refinery) Tank cleaning Chemical mixing and handling * Metal work Metal grinding Welding in certain applications (worn over appropriate welding garment)2 Summary: Materials and design * Color options * Suit material * * Fabric weight Coating * Storm flap * * * Cuffs * Reinforced gusset Hood design Seams type White White, blue White White with blue full back SMMS PE laminate + SMMMS White with blue triangle BICO PE laminate + SMMMS 49 gsm White White with red taped seams Grey BICO PE laminate BICO PE laminate Multi-layer PE laminate 49 gsm 49 gsm 92 gsm Anti-static Sealable flap Anti-static Sealable flap Knitted PE laminate SMS 47 gsm 50 gsm 43 gsm 54 gsm 55 gsm Anti-static Anti-static Storm flap with tabs Anti-static, FR Sealable flap Anti-static Basic flap None Storm flap with tabs Basic flap Anti-static Sealable flap Elastic Elastic Knitted Knitted Knitted Knitted Knitted No No No Yes Yes Yes Yes 2-panel Stitched & partially bound 2-panel 3-panel 3-panel Stitched Stitched Stitched 1 F or applications conducted in a controlled environment refer to "Cleanroom Applications". 2 Material will melt when contacting spatter and hot surfaces. 3 Refer to pesticide manufacturer's recommendations for appropriate level of liquid/particulate protection. ** See pages 4-5 for additional overview and technical data sheets at 3M.com/ protectiveapparel for fuller specifications. 3 Personal Safety Division SMMMS Blue 2-panel 3-panel 3-panel Stitched & Stitched & Stitched & partially bound partially bound partially bound No Anti-static Double flap, double zip Elastic + thumb loops No 3-panel 3-panel Taped Taped Important Notice This guide is only an outline. It should not be used as the only means for selecting protective clothing. Before using any protective clothing, the wearer must read and understand the user instructions for each product. Specific country legislation must be observed. If in doubt, contact a safety professional. Selection of the most appropriate PPE will depend on the particular situation and should only be made by a competent person knowledgeable of the actual working conditions and the limitations of PPE. Final determination as to the suitability of these products for a particular situation is the employer's responsibility. This information is subject to revision at any time. Always read and follow all User Instructions supplied with your 3MTM Protective Coveralls in order to ensure correct operation. If you have questions contact 3M Technical Service. LIMITATION OF LIABILITY: Except as provided above, 3M shall not be liable or responsible for any loss or damage, whether direct, indirect, incidental, special or consequential arising out of the sale, use or misuse of 3M PSD products, or the user's inability to use such products. THESE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE. WARRANTY: 3M will replace or refund the purchase price of any Personal Safety Division product found to be defective in material, manufacture, or not in conformance with any expressed warranty. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 3M Center, Building 235-2NW-70 St. Paul, MN 55144-1000 www.3m.com/workersafety 3M PSD products are for occupational use only Please recycle. Printed in USA. (c) 3M 2016. All rights reserved. Issued: 9/16 11683HB 70-0716-7207-8 3M is a trademark of 3M Company. Used under license by 3M subsidiaries and affiliates.