DS-117 / 308 Three-Way Power Divider, 1 - 300 MHz Features * * * * * * Rev. V3 FP-3 (DS-117) Low Loss: 0.5 dB Typical Impedance: 50 Ohms Nominal Power Rating: 1W Max. Internal Load Dissipation: 0.05 W Max. Flatpack and Connectorized Packages MIL-STD-202 Screening Available Description A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. C-8 (DS-308) Pin Configuration (DS-117) Pin No. Function Pin No. Function 1 GND 5 Output 2 GND 6 GND 3 Input 7 Output 4 GND 8 GND 5 GND 10 Output 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS-117 / 308 Three-Way Power Divider, 1 - 300 MHz Rev. V3 DS-113 Electrical Specifications1: TA = -55C to +85C Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 2 - 200 MHz 1 - 300 MHz dB dB -- -- -- -- 0.75 1.0 Isolation -- 2 - 200 MHz 1 - 300 MHz dB dB 30 20 -- -- -- -- Amplitude Balance -- 1 - 300 MHz dB -- -- 0.25 Phase Balance -- 2 - 200 MHz 1 - 300 MHz -- -- -- -- 3 4 VSWR All Ports 2 - 200 MHz 1 - 300 MHz Ratio Ratio -- -- -- -- 1.3:1 1.5:1 1. All specifications apply with 50 ohm source and load impedance. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS-117 / 308 Three-Way Power Divider, 1 - 300 MHz Rev. V3 Typical Performance Curves Insertion Loss VSWR Isolation Ordering Information Part Number Package DS-117 PIN FP-3 DS-308 BNC C-8 DS-308 N C-8 DS-308 SMA C-8 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.