Classification: "Lithium Coin"
Lithium / Manganese Dioxide (Li/MnO2)
Designation: ANSI-5012LC, IEC-CR1220
Nominal Voltage: 3.0 Volts
Typical Capacity: 37 mAh (to 2.0 volts)
(Rated at 45K ohms at 21°C)
Typical Weight: 0.8 grams (0.03 oz.)
Typical Volume: 0.25 cubic centimeters (0.02 cubic inch)
Max Rev Charge: 1 microampere
Energy Density: 153 milliwatt hr/g, 464 milliwatt hr/cc
Typical Li Content: 0.006 grams (0.0002 oz.)
Operating Temp: -30C to 70C
Self Discharge: ~1% / year
62,000 800 Bkgnd Drain: Continuous
Pulse Drain: 2 seconds X 12 times/day
Simulated Application test
Typical Performance at 21°C (70°F)
Industry Standard Dimensions
1) KEEP OUT OF REACH OF CHILDREN. Swallowing may lead to
serious injury or death in as little as 2 hours due to chemical burns and
potential perforation of the esophagus. Immediately see doctor; have
doctor phone (800) 498-8666.
(2) Battery compartment design. To prevent children from removing
batteries, battery compartments should be designed with one of the
following methods: a) a tool such as screwdriver or coin is required to open
battery compartment or b) the battery compartment door/cover requires
the application of a minimum of two independent and simultaneous
movements of the securing mechanism to open by hand. Screws should
remain captive with the battery door or cover.
Contents herein do not constitute a warranty and are for reference only.
Pulse Test at 21°C (70°F)
Typical Discharge Characteristics
Internal Resistance Characteristics
This datasheet contains typical information specific to products manufactured at the time of its publication.
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
0 200 400 600 800 1000
Voltage, CCV
Service, Hours
Load: 45K ohms - Continuous
Typical Drain @ 2.9V: 0.046 mA
0
10
20
30
40
50
60
70
80
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
0 5 10 15 20 25 30 35 40
IR, ohms
Voltage, CCV
Capacity, mAh
2.00 (0.079)
1.80 (0.071)
1.60 (0.063) Ref.
1.40 (0.055) Ref.
12.25 (0.482)
12.50 (0.492)
4.00 (0.157)
Minimum
0.20 (0.008) Maximum Ref.
Permissible deflection from a flat.
0.03 (0.001) Minimum Ref.
(Applies to top edge of gasket or
edge of crimp, whichever is higher.)