ADM00345 - Microchip Technology

MTD6505

3-Phase BLDC

Sensorless Fan Controller

Demonstration Board

User’s Guide

Information contained in this publication regarding device

applications and the like is provided only for your convenience

and may be superseded by updates. It is your responsibility to

ensure that your application meets with your specifications.

MICROCHIP MAKES NO REPRESENTATIONS OR

WARRANTIES OF ANY KIND WHETHER EXPRESS OR

IMPLIED, WRITTEN OR ORAL, STATUTORY OR

OTHERWISE, RELATED TO THE INFORMATION,

INCLUDING BUT NOT LIMITED TO ITS CONDITION,

QUALITY, PERFORMANCE, MERCHANTABILITY OR

FITNESS FOR PURPOSE. Microchip disclaims all liability

arising from this information and its use. Use of Microchip

devices in life support and/or safety applications is entirely at

the buyer’s risk, and the buyer agrees to defend, indemnify and

hold harmless Microchip from any and all damages, claims,

suits, or expenses resulting from such use. No licenses are

conveyed, implicitly or otherwise, under any Microchip

intellectual property rights.

Trademarks

The Microchip name and logo, the Microchip logo, dsPIC,

KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART,

PIC32 logo, rfPIC and UNI/O are registered trademarks of

Microchip Technology Incorporated in the U.S.A. and other

countries.

FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,

MXDEV, MXLAB, SEEVAL and The Embedded Control

Solutions Company are registered trademarks of Microchip

Technology Incorporated in the U.S.A.

Analog-for-the-Digital Age, Application Maestro, chipKIT,

chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net,

dsPICworks, dsSPEAK, ECAN, ECONOMONITOR,

FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP,

Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB,

MPLINK, mTouch, Omniscient Code Generation, PICC,

PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE,

rfLAB, Select Mode, Total Endurance, TSHARC,

UniWinDriver, WiperLock and ZENA are trademarks of

Microchip Technology Incorporated in the U.S.A. and other

countries.

SQTP is a service mark of Microchip Technology Incorporated

in the U.S.A.

All other trademarks mentioned herein are property of their

respective companies.

Printed on recycled paper.

ISBN: 978-1-61341-886-4

Note the following details of th e code protectio n feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the

intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our

knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data

Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not

mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our

products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts

allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2009 certification for its worldwide

headquarters, design and wafer fabrication facilities in Chandler and

Tempe, Arizona; Gresham, Oregon and design centers in California

and India. The Company’s quality system processes and procedures

are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping

devices, Serial EEPROMs, microperiph erals, nonvolatile memory and

analog products. In addition, Microchip’s quality system for the design

and manufacture of development systems is ISO 9001:2000 certified.

MTD6505 3-PHASE BLDC

SENSORLESS FAN CONTROLLER

DEMO BOARD USER’S GUIDE

Table of Contents

Preface ...........................................................................................................................5

Introduction............................................................................................................ 5

Document Layout .................................................................................................. 5

Conventions Used in this Guide ............................................................................ 6

Recommended Reading........................................................................................ 7

The Microchip Web Site ........................................................................................ 7

Customer Support ................................................................................................. 7

Document Revision History ................................................................................... 7

Chapter 1. Product Overview

1.1 Introduction ..................................................................................................... 9

1.2 MTD6505 3-Phase BLDC Sensorless Fan Controller

Demonstration Board Hardware Description .......................................... 10

1.3 What the MTD6505 3-Phase BLDC Sensorless Fan Controller

Demonstration Board Kit Includes .......................................................... 10

Chapter 2. Installation and Operation

2.1 Getting Started ............................................................................................. 11

2.1.1 Software Installation .................................................................................. 11

2.1.2 Board Installation ....................................................................................... 11

2.2 MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board

Software Description .............................................................................. 13

2.2.1 Controlling and Monitoring Tab ................................................................. 13

2.2.2 Measurement Tab ..................................................................................... 15

2.3 How to Define the Correct RPROG Value ...................................................... 18

2.3.1 Operation ................................................................................................... 18

Appendix A. Schema tics and Layouts

A.1 Introduction .................................................................................................. 19

A.2 Board – Schematic: Power Management Part and Resistor for

Programming Part .................................................................................. 20

A.3 Board – Schematic: Direction Pin Management Part, PIC Reserves Part,

and MTD6505 Voltage and Current Monitoring Part .............................. 21

A.4 Board – Schematic: PIC24FJ256GB106 Part .............................................. 22

A.5 Board – Schematic: IC Part/MTD6505 Plug-in Module Socket Part,

USB Connection Part, LED Part, and Reset Switch Part ....................... 23

A.6 Board – Top Silk and Pads .......................................................................... 24

A.7 Board – Top Trace and Pads ....................................................................... 25

A.8 Board – Bottom Trace and Pads .................................................................. 26

Appendix B. Bill of Materials

Worldwide Sales and Service ....................................................................................30

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

MTD6505 3-PHASE BLDC

SENSORLESS FAN CONTROLLER

DEMO BOARD USER’S GUIDE

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board. Items

discussed in this chapter include:

• Document Layout

• Conventions Used in this Guide

• Recommended Reading

• The Microchip Web Site

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the MTD6505 3-Phase BLDC Sensorless Fan

Controller Demonstration Board as a development tool to emulate and debug firmware

on a target board. The manual layout is as follows:

•Chapter 1. “Product Overview” – Important information about the MTD6505

3-Phase BLDC Sensorless Fan Controller Demonstration Board.

•Chapter 2. “Installation and Operation” – Includes instructions on how to get

started with MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration

Board.

•Appendix A. “Schematics and Layouts” – Shows the schematic and layout

diagrams for the MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstra-

tion Board.

•Appendix B. “Bill of Materials” – Lists the parts used to build the MTD6505

3-Phase BLDC Sensorless Fan Controller Demonstration Board.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

For the most up-to-date information on development tools, see the MPLAB® IDE online help.

Select the Help menu, and then Topics to open a list of available online help files.

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description Represents Examples

Arial font:

Italic characters Referenced books MPLAB® IDE User’s Guide

Emphasized text ...is the only compiler...

Initial caps A window the Output window

A dialog the Settings dialog

A menu selection select Enable Programmer

Quotes A field name in a window or

dialog

“Save project before build”

Underlined, italic text with

right angle bracket

A menu path File>Save

Bold characters A dialog button Click OK

A tab Click the Power tab

N‘Rnnnn A number in verilog format,

where N is the total number of

digits, R is the radix and n is a

digit.

4‘b0010, 2‘hF1

Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>

Courier New font:

Plain Courier New Sample source code #define START

Filenames autoexec.bat

File paths c:\mcc18\h

Keywords _asm, _endasm, static

Command-line options -Opa+, -Opa-

Bit values 0, 1

Constants 0xFF, ‘A’

Italic Courier New A variable argument file.o, where file can be

any valid filename

Square brackets [ ] Optional arguments mcc18 [options] file

[options]

Curly brackets and pipe

character: { | }

Choice of mutually exclusive

arguments; an OR selection

errorlevel {0|1}

Ellipses... Replaces repeated text var_name [,

var_name...]

Represents code supplied by

user

void main (void)

{ ...

}

Preface

RECOMMENDED READING

This user's guide describes how to use MTD6505 3-Phase BLDC Sensorless Fan

Controller Demonstration Board. Other useful documents are listed below. The

following Microchip documents are available and recommended as supplemental

reference resources.

• MTD6505 Dat a Sheet, “3-Phase BLDC Sinusoidal Sensorless Fan Motor Drive”

(DS22281)

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at www.microchip.com. This web

site is used as a means to make files and information easily available to customers.

Accessible by using your favorite Internet browser, the web site contains the following

information:

•Product Support – Data sheets and errata, application notes and sample

programs, design resources, user’s guides and hardware support documents,

latest software releases and archived software

•General Technical Support – Frequently Asked Questions (FAQs), technical

support requests, online discussion groups, Microchip consultant program

member listing

•Business of Microchip – Product selector and ordering guides, latest Microchip

press releases, listing of seminars and events, listings of Microchip sales offices,

distributors and factory representatives

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support

Customers should contact their distributor, representative or field application engineer

(FAE) for support. Local sales offices are also available to help customers. A listing of

sales offices and locations is included in the back of this document.

Technical support is available through the web site at: http://www.microchip.com/support .

DOCUMENT REVISION HISTORY

Revision A (December 2011)

• Initial Release of this Document.

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

NOTES:

MTD6505 3-PHASE BLDC

SENSORLESS FAN CONTROLLER

DEMO BOARD USER’S GUIDE

Chapter 1. Product Overview

1.1 INTRODUCTION

The MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board allows

the control and monitoring of the MTD6505 device, using a PC software connected to

the MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board via a

USB connection.

The MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board

Software provides several features, such as VDD control and monitoring, pulse-width

modulation (PWM) control, speed and current consumption monitoring. It also allows

controlling the RPROG resistor value for fan fitting.

FIGURE 1-1: System Overview.

MTD6505

Plug-in

Module

MTD6505 3-Phase BLDC

Sensorless Fa n Contro ller

Demonstration Board

6V VIN

USB Connection

WVU

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

1.2 MTD6505 3-PHASE BLDC SENSORLESS FAN CONTROLLE R

DEMONSTRATION BOARD HARDWARE DESCRIPTION

The MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board

contains several components, such as:

• A microcontroller (PIC24FJ256GB) for USB connection, PWM generation, FG

frequency measurement, VDD measurement, other’s signal’s activations and

component’s communication.

• An adjustable LDO (MCP1827) combined to a digital potentiometer (MCP42050)

to provide the VDD to the MTD6505 device. The LDO can be enabled or disabled

by the microcontroller.

• The digital potentiometer is also used to set the MTD6505 RPROG external

resistor value.

• A Delta-Sigma (MCP3421) combined to a shunt resistor for sensing the MTD6505

current consumption on the VDD pin.

More details of the schematic are available in Appendix A. “Schematics and

Layouts”.

1.3 WHAT THE MTD65 05 3-PHASE BLDC SENSORLE SS FAN CONTROLLER

DEMONSTRATION BOARD KIT INCLUDES

The MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board

includes:

• MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board

(ADM00345)

• 3 x MTD6505 plug-in modules with soldered on MTD6505 (3x3 UDFN-10L)

• A mini-USB cable

• A 3-Phase BLDC fan (use with KM=1)

• Important Information Sheet

MTD6505 3-PHASE BLDC

SENSORLESS FAN CONTROLLER

DEMO BOARD USER’S GUIDE

Chapter 2. Installation and Operation

2.1 GETTING STARTED

The following sections describe how to use the MTD6505 3-Phase BLDC Sensorless

Fan Controller Demonstration Board.

2.1.1 Software Installation

Download the MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration

Board software installer from the Microchip web site at http://www.microchip.com. From

the web site, search for the evaluation board by part number ADM00345. The GUI can

be downloaded from this web page.

2.1.2 Board installation

Figure 2-1 identifies the required points for using the MTD6505 3-Phase BLDC Sensor-

less Fan Controller Demonstration Board.

FIGURE 2-1: Top View - Hardware Components.

Note: This application requires Microsoft .NET Framework 2.0 or later.

102-00345

ON OFF

6[V] V

RESET

mini-USB

6505 Daughter

Board socket

3-Phase Fan

Connector

POWER

LED

USB

LED

Legend:

1 = Input connector 4 = Plug-in module connector

2 = ON/OFF switch 5 = MTD6505 plug-in module socket

3 = Reset button 6 = 3-Phase fan connector

MTD6505 Plug-in

Module socket

6V VIN

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

To use the MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board,

follow the next steps:

1. Plug in the MTD6505 plug-in module (with an MTD6505 soldered on it) on its

socket (see Figure 2-1).

2. To plug in a 3-Phase BLDC sensorless fan, choose one of these connections:

- 3-Phase fan connector from the MTD6505 3-Phase BLDC Sensorless Fan

Controller Demonstration Board (J5)

- On the MTD6505 plug-in module fan connector.

3. Connect the Power Supply to the VIN test point. VIN value is +6V ±5%. The

Power Supply should be able to deliver up to 1.0A.

4. Turn on the power switch. The POWER LED should be activated.

5. Plug the mini-USB cable from the USB port of a computer to the MTD6505

3-Phase BLDC Sensorless Fan Controller Demonstration Board connector.

6. If required, let the computer identify the MTD6505 3-Phase BLDC Sensorless

Fan Controller Demonstration Board.

7. Restart the computer, if required.

8. Start the MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration

Board Software.

Note: Once the MTD6505 3-Phase BLDC Sensorless Fan Controller

Demonstration Board Software is installed, it will automatically detect if the

MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board

is attached and its configuration. This means it is possible to start the

MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board

Software before or after enabling the board.

Installation and Op eration

2.2 MTD6505 3-PHASE BLDC SENSORLESS FAN CONTROLLE R

DEMONSTRATION BOARD SOFTWARE DESCRIPTION

The MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board

Software window contains two tabs. The first tab is for controlling and monitoring the

MTD6505 3-Phase BLDC Sensorless Fan Controller Demonstration Board; the second

tab is the Measurement tab.

2.2.1 Controlling and Monitoring Tab

Figure 2-2 shows the options and functions available to control and monitor the board.

FIGURE 2-2: GUI - Controlling and Monitoring Tab.

All functions presented in Figure 2-2 are enabled only when the MTD6505 3-Phase

BLDC Sensorless Fan Controller Demonstration Board is connected to the PC via a

USB connection.

Legend:

1 = Control Group box 5 = Instant current measurement

2=R

PROG Pin Group box 6 = PWM Control Group box

3 = Chart Group box 7 = VDD Control Group box

4 = Instant speed measurement

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

2.2.1.1 CONTROL/MONITORING

The Control/Monitoring Group box contains two buttons:

•Turn On/O ff VDD button enables/disables the power supply on the VDD pin of the

MTD6505 device.

•Change Direction is used to inverse the sense of the fan rotation. The Change

Direction button is available only when VDD is turned off.

2.2.1.2 RPROG PIN

The RPROG Pin Group box allows the selection of the desired RPROG resistor value.

This value depends on the KM (mV/Hz) of the fan. See the section Section 2.3 “How

to define the correct RPROG Value” for more information on the RPROG selection.

One particular mode, HighZ, allows the setting of an external RPROG resistor value

directly on the plug-in module.

In order to use the MTD6502B with the MTD6505 3-Phase BLDC Sensorless Fan Con-

troller Demo Board, use KM= 0.

2.2.1.3 CHART

This part of the GUI displays a chart of the MTD6505 current consumption (mA) on the

VDD pin, and the fan speed (Revolutions Per Minute - RPM) by measuring the FG fre-

quency. The chart adds 10 values per second. The three buttons have the following

functions:

•Start/Stop – allows the values acquisition to start or stop

•Clear – removes all the values added to the chart

•Auto Scale – allows the restoration of the default scaling. In the default scaling

mode, the chart will automatically adjust the scaling to ensure the complete view

of the whole added values. In addition, when selecting a part of the chart with the

mouse, it is possible to zoom in the selection. The mouse wheel zoom in/out is

also enabled.

2.2.1.4 PWM PIN

The PWM Group box provides a slide bar to set the PWM ratio on the MTD6505 PWM

pin. The gauge below indicates the current PWM applied.

2.2.1.5 VDD PIN

The VDD Group box also provides a slide bar to set the desired VDD value. The gauge

below indicates the instant VDD value measured by the MTD6505 3-Phase BLDC

Sensorless Fan Controller Demonstration Board.

2.2.1.6 CURRENT/SPEED FIELDS

Current field shows the instant current measure (mA). Speed field shows the instant

speed measure (RPM).

Installation and Op eration

2.2.2 Measurement Tab

The Measurement tab is used to check if the fan is correctly adapted to the MTD6505

by testing the fan several times in different conditions. This tab contains two more tabs,

for settings and results.

2.2.2.1 SETTINGS TAB

Figure 2-3 shows the Setting tab.

FIGURE 2-3: GUI - Measurement tab – Settings.

Legend:

1 = Measurement Settings Group box

2 = Startup measurement

3 = PWM Change Measurement Group box

4 = Speed Curve and Stability Measurement Group box

5 = Measurement Control Group box

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

2.2.2.1.1 Measurement Settings

The M eas ureme n t Settin gs Group box is used to specify the measurement corners

required:

•Number of iterations – for one corner

•PWM Corner s Measur emen t – requires the PWM Max (%), PWM Step (%) and

PWM Min (%) values setting. The software will start with the maximum value

entered, and will decrease the PWM by the step value until reaches the minimum

entered PWM value.

•VDD corners are similar to the PWM corners. A VDD corner includes all PWM

corners. This means that for one VDD corner, all PWM corners are measured.

•Startup max delay – if the speed of the fan is measured as 0 RPM after this

delay, the startup is considered a fail. The recommended value for this field is 3s.

•Inter test delay – specifies how many seconds are allocated to stop the fan

between two tests. This value will depend on the fan lag.

2.2.2.1.2 Startup

When the Startup box is checked, the startup measurements are enabled, measuring

every corner for this test. If Startup is not enabled, the Startup test is skipped. The other

tests will be executed if they are enabled.

2.2.2.1.3 PWM Change

The PWM Change Measurement starts up with a PWM value of 100%. After the

specified startup delay (entered in the Startup max delay field), the PWM changes

depending on the PWM corner specified. The software will then verify if the fan is still

running. This last check will occur after a delay value is specified in the

Braking Delay (s) field.

2.2.2.1.4 Speed Curve and Stability

This measurement requires a specified number of samples in a specified condition to

check speed stability. If the Do every percent PWM and/or Do every 0.1(V ) for VDD

are not checked, the corners are measured. For this test, the iterations numbering will

always be 1. When the Do every pe rce n t PW M option is enabled, the software will

override the specified settings, and the measurement will occur for every PWM; the

same procedure will happen for VDD, if the check box Do every 0.1[V] for VDD is

checked.

2.2.2.1.5 Measurement Control

This group box contains three buttons that allows the user to control the work flow:

•Stop Measuring – starts and stops the required measuring

•Clear Result – clears the current result from the screen

•Save Results – stores the current measurement in an Excel file

Installation and Op eration

2.2.2.2 MEASUREMENT RESULTS TAB

Figure 2-4 shows the Measurement Results sub-tab:

FIGURE 2-4: GUI - Measurement – Results Tab.

The results are stored in this table. All the tests have the first six columns in common,

with the other columns being significant only for a specific test. Settings’ control buttons

are also visible in this tab (see description in Section 2.2.2.1.5 “Measurement

Control”).

Legend:

1 = Measurement Results table

2 = Measurement Control Group box

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

2.3 HOW TO DEFINE THE CORRECT RPROG VALUE

This section explains how to define the correct KM value for a specific fan. The KM is

linked to the RPROG (see Ta b le 2 - 1 ). An incorrect KM selection can create issues, or

reduce the efficiency.

2.3.1 Operation

Follow the next steps to define the right RPROG value:

1. Apply a constant stream of air to a fan that is not connected.

2. Using an oscilloscope, measure the waveform between two phases, when the

fan is rotating.

3. Measure the generated peak-to-peak voltage (Vp-p) value and the frequency (f).

4. Compute KM based on the measured Vp-p and f (in mV/Hz):

EQUATION 2-1: KM COMPUTE

KM should be constant, for all fan rotation speeds, but for the KM measurement, the fan

rotation speed due to the air stream, should be close to the nominal fan rotation speed.

Ta b l e 2 - 1 shows the corresponding KM for different RPROG values.

TABLE 2-1: RPROG VALUE

RPROG KMKM Range

(mV/Hz)

VBIAS (0Ω) 3 26 - 52

3.9 kΩ2 13 - 26

24 kΩ16.5 - 13

GND 0 3.25 - 6.5

KmVpp–

------------=

MTD6505 3-PHASE BLDC

SENSORLESS FAN CONTROLLER

DEMO BOARD USER’S GUIDE

Appendix A. Schematics and Layouts

A.1 INTRODUCTION

This appendix contains the following schematics and layouts for the MTD6505 3-Phase

BLDC Sensorless Fan Controller Demonstration Board:

• Board - Schematic: Power Management Part and Resistor for Programming Part

• Board – Schematic: Direction Pin Management Part, PIC Reserves Part and

MTD6505 Voltage and Current Monitoring Part

• Board – Schematic: PIC24FJ256GB106 Part

• Board – Schematic: IC Part/MTD6505 Plug-in Module Socket Part, USB Connection

Part, LED Part and Reset Switch Part

• Board – Top Silk and Pads

• Board – Top Trace and Pads

• Board – Bottom Trace and Pads

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

A.2 BOARD – SCHEMATIC: POWER MANAGEMENT PART AND RESISTOR FOR

PROGRAMMING PART

R PROG PART

R_PROG

0, 3.9K, 24K

POWER PART

R_ADJ

(Max R on code 0, low output)

R20

100K

Schematics and Layouts

A.3 BOARD – SCHEMATIC: DIRECTION PIN MANAGE ME NT PART, PIC

RESERVES PART, AND MTD6505 VO LTAGE AND CURRENT MONITORING

PART

12 1

TRAP TNEMGANAM NIP RID CI

0.05R shunt 1%

VOLTAGE AND CURRENT MONITORING PART CI

PIC RESERVE PART

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

A.4 BOARD – SCHEMATIC: PIC24FJ256GB106 PART

PIC24F Part

Schematics and Layouts

A.5 BOARD – SCHEMATIC: IC PART/MTD6505 PLUG-IN MODULE SOCKET

PART, USB CONNECTION PART, LED PART, AND RESET SWITCH PART

LED PART

IC PART

RESET SWITCH PART

USB CONNECTION PART

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

A.6 BOARD – TO P SILK AND PADS

Schematics and Layouts

A.7 BOARD – TOP TRACE AND PADS

MTD6505 3-Phase BLDC Sensorless Fan Controller Demo Board User’s Guide

A.8 BOARD – BOTTOM TRACE AND PADS

MTD6505 3-PHASE BLDC

SENSORLESS FAN CONTROLLER

DEMO BOARD USER’S GUIDE

Appe nd ix B. Bill of Materials

TABLE B-1: BILL OF MATERIALS (BOM)

Qty Reference Description Manufacturer Part Number

2 C1, C2 CAP CER 20PF 50V C0G 0603 TDK® Corporation C1608C0G1H200J

8 C3, C6, C7,

C8, C9, C10,

C11, C21

CAP CER .1UF 16V 10% X7R 0603 Murata Electronics®GRM188R71C104KA01D

3 C4, C16, C22 CAP CERAMIC 10.0UF 16V X5R

1206

KEMET® Electronics

Corp.

C1206C106K4PACTU

2 C5, C23 CAP CER 10UF 6.3V X5R 0603 KEMET Electronics

Corp.

C0603C106M9PACTU

4 C12, C13,

C18, C20

CAP CERAMIC 4.7UF 16V X7R 1206 KEMET Electronics

Corp.

C1206C475K4RACTU

4 C14, C15,

C17, C19

CAP CER 1.0UF 16V 10% X5R 0603 Murata Electronics GRM188R61C105KA93D

1 C24 CAP ALUM 10UF 16V 20% SMD Panasonic® - ECG EEE-HC1C100R

2 D1, D5, D6 DIODE SCHOTTKY 30V 200MA

SC-76

NXP Semiconductors 1PS76SB10,115

3 D2, D3, D4 LED INGAN BLUE CLEAR 1206 SMD Dialight Corp. 598-8291-107F

1 D6 DIODE ZENER 12V 400MW SOD323 NXP Semiconductors PDZ12B,115

1 F1 Fuse 044901.5MR - FUSE, SMD, 1.5A,

TIME DELAY

Littelfuse®044901.5MR

1 F1 Holder 0154007.DR - FUSE BLOCK W/ 7A

FUSE, FAST ACTING

Littelfuse R154007

1 J1, J2 PC TEST POINT COMPACT SMT Keystone Electronics 5016

3 J3, J3, U2 CONN RCPT .100" 5POS SNGL TIN Samtec, Inc. SLW-105-01-T-S

1 J4 CONN HDR BRKWAY .100 05POS

VERT

TE Connectivity 9-146282-0-05

1 J5 CONN HDR BRKWAY .100 03POS

VERT

TE Connectivity 9-146282-0-03

1 R1 RES 150K OHM 1/10W 5% 0603

SMD

Panasonic - ECG ERJ-3GEYJ154V

1 R2 RES .05 OHM 1W 1% 1206 SMD Vishay®/Dale WSLP1206R0500FEA

2 R3, R4 RES 100K OHM 1/10W 1% 0603

SMD

Panasonic - ECG ERJ-3EKF1003V

9 R5, R6, R10,

R13, R20,

R23, R24,

R25, R26

RES 100K OHM 1/10W 5% 0603

SMD

Panasonic - ECG ERJ-3GEYJ104V

8R7, R11,

R12, R14,

R15, R16,

R21, R22

RES 1.0K OHM 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ102V

Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The

released BOM used in manufacturing uses all RoHS-compliant components.

MTD6505 3-Phase BLDC Sensorless Fan Controller Demostration Board

2 R8, R18 RES 10K OHM 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ103V

1 R9 RES 4.7K OHM 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ472V

2 R17, R19 RES 470 OHM 1/10W 5% 0603 SMD Panasonic - ECG ERJ-3GEYJ471V

1 S1 SWITCH, TACTILE SPST 50mA,

SMD GULL WING

TE Connectivity

Alcoswitch

FSM2JSMATR

1 U1 300 mA, Low Voltage, Low Quiescent

Current LDO Regulator

Microchip Technology

Inc.

MCP1824S-3302E/DB:3.3V

1 U3 18-Bit Analog-to-Digital Converter

with I2C Interface and On-Board

Reference

Microchip Technology

Inc.

MCP3421A0T-E/CH

1 U4 Single/Dual Digital Potentiometer with

SPI Interface

Microchip Technology

Inc.

MCP42050-E/SL

1 U5 Positive Doubling Charge Pumps with

Shutdown

Microchip Technology

Inc.

TC1240AXCHTR

1 U6 64-Pin, 16-Bit Flash Microcontroller

with USB On-The-Go (OTG)

Microchip Technology

Inc.

PIC24FJ256GB106-I/PT

2 U7, U11 MOSFET N-CH 20V 1.2A SC59-3 Diodes Incorporated®DMN2112SN-7

1 U8 1.5A, Low Voltage, Low Quiescent

Current LDO Regulator

Microchip Technology

Inc.

MCP1827-ADJE/ET

3 U12, U13,

U16

MOSFET P-CH 20V 1A SSOT3 Fairchild

Semiconductor®

NDS332P

1 U14 Plug-in Module connector Type B

(USB 2.0)

Hsuan Mao Technology

Co., Ltd

C8320-05BFRSB0R

1 U15 SLIDE SWITCH, SPDT Knitter-Switch MFP106D

1 Y1 CRYSTAL, HC49/SMD, 16.000MHZ Aker Technology CAA-16.000-18-3050-X

1 FAN 3-Phase BLDC Fan Kunshan Kipo

Technology Co., LTD

FAKL600EPA

TABLE B-1: BILL OF MATERIALS (BOM) (CONTINUED)

Qty Reference Description Manufacturer Part Number

Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The

released BOM used in manufacturing uses all RoHS-compliant components.

NOTES:

AMERICAS

Corporate Office

2355 West Chandler Blvd.

Chandler, AZ 85224-6199

Tel: 480-792-7200

Fax: 480-792-7277

Technical Support:

http://www.microchip.com/

support

Web Address:

www.microchip.com

Atlanta

Duluth, GA

Tel: 678-957-9614

Fax: 678-957-1455

Boston

Westborough, MA

Tel: 774-760-0087

Fax: 774-760-0088

Chicago

Itasca, IL

Tel: 630-285-0071

Fax: 630-285-0075

Cleveland

Independence, OH

Tel: 216-447-0464

Fax: 216-447-0643

Dallas

Addison, TX

Tel: 972-818-7423

Fax: 972-818-2924

Detroit

Farmington Hills, MI

Tel: 248-538-2250

Fax: 248-538-2260

Indianapolis

Noblesville, IN

Tel: 317-773-8323

Fax: 317-773-5453

Los A n ge les

Mission Viejo, CA

Tel: 949-462-9523

Fax: 949-462-9608

Santa Clara

Santa Clara, CA

Tel: 408-961-6444

Fax: 408-961-6445

Toronto

Mississauga, Ontario,

Canada

Tel: 905-673-0699

Fax: 905-673-6509

ASIA/PACIFIC

Asia Pacific Office

Suites 3707-14, 37th Floor

Tower 6, The Gateway

Harbour City, Kowloon

Hong Kong

Tel: 852-2401-1200

Fax: 852-2401-3431

Australia - Sydney

Tel: 61-2-9868-6733

Fax: 61-2-9868-6755

China - Beijing

Tel: 86-10-8569-7000

Fax: 86-10-8528-2104

China - Chengdu

Tel: 86-28-8665-5511

Fax: 86-28-8665-7889

China - Chongqing

Tel: 86-23-8980-9588

Fax: 86-23-8980-9500

China - Hangzhou

Tel: 86-571-2819-3187

Fax: 86-571-2819-3189

China - Hong Kong SAR

Tel: 852-2401-1200

Fax: 852-2401-3431

China - Nanjing

Tel: 86-25-8473-2460

Fax: 86-25-8473-2470

China - Qingdao

Tel: 86-532-8502-7355

Fax: 86-532-8502-7205

China - Shanghai

Tel: 86-21-5407-5533

Fax: 86-21-5407-5066

China - Shenyang

Tel: 86-24-2334-2829

Fax: 86-24-2334-2393

China - Shenzhen

Tel: 86-755-8203-2660

Fax: 86-755-8203-1760

China - Wuhan

Tel: 86-27-5980-5300

Fax: 86-27-5980-5118

China - Xian

Tel: 86-29-8833-7252

Fax: 86-29-8833-7256

China - Xiamen

Tel: 86-592-2388138

Fax: 86-592-2388130

China - Zhuhai

Tel: 86-756-3210040

Fax: 86-756-3210049

ASIA/PACIFIC

India - Bangalore

Tel: 91-80-3090-4444

Fax: 91-80-3090-4123

India - New Delhi

Tel: 91-11-4160-8631

Fax: 91-11-4160-8632

India - Pune

Tel: 91-20-2566-1512

Fax: 91-20-2566-1513

Japan - Osaka

Tel: 81-66-152-7160

Fax: 81-66-152-9310

Japan - Yokohama

Tel: 81-45-471- 6166

Fax: 81-45-471-6122

Korea - Daegu

Tel: 82-53-744-4301

Fax: 82-53-744-4302

Korea - Seoul

Tel: 82-2-554-7200

Fax: 82-2-558-5932 or

82-2-558-5934

Malaysia - Kuala Lumpur

Tel: 60-3-6201-9857

Fax: 60-3-6201-9859

Malaysia - Penang

Tel: 60-4-227-8870

Fax: 60-4-227-4068

Philippines - Manila

Tel: 63-2-634-9065

Fax: 63-2-634-9069

Singapore

Tel: 65-6334-8870

Fax: 65-6334-8850

Taiwan - Hsin Chu

Tel: 886-3-5778-366

Fax: 886-3-5770-955

Taiwan - Kaohsi ung

Tel: 886-7-536-4818

Fax: 886-7-330-9305

Taiwan - Taipei

Tel: 886-2-2500-6610

Fax: 886-2-2508-0102

Thailand - Bangkok

Tel: 66-2-694-1351

Fax: 66-2-694-1350

EUROPE

Austria - Wels

Tel: 43-7242-2244-39

Fax: 43-7242-2244-393

Denmark - Cop e nha gen

Tel: 45-4450-2828

Fax: 45-4485-2829

France - Paris

Tel: 33-1-69-53-63-20

Fax: 33-1-69-30-90-79

Germany - Munich

Tel: 49-89-627-144-0

Fax: 49-89-627-144-44

Italy - Milan

Tel: 39-0331-742611

Fax: 39-0331-466781

Netherlands - Drunen

Tel: 31-416-690399

Fax: 31-416-690340

Spain - Madrid

Tel: 34-91-708-08-90

Fax: 34-91-708-08-91

UK - Wokingham

Tel: 44-118-921-5869

Fax: 44-118-921-5820

Worldwide Sales and Service

11/29/11