©2004 Littelfuse, Inc. E4 - 1 http://www.littelfuse.com
Thyristor Product Catalog +1 972-580-7777
*
Selected Packages
U.L. RECOGNIZED
File #E71639
Alternistor Triacs
(6 A to 40 A)
E4
General Description
Teccor offers bidirectional alternistors with current ratings from
6 A to 40 A and voltages from 200 V to 1000 V as part of Tec-
cor's broad line of thyristors. Teccor's alternistor is specifically
designed for applications that switch highly inductive loads.
A special chip offers the same performance as two thyristors
(SCRs) wired inverse parallel (back-to-back), providing better
turn-off behavior than a standard triac. An alternistor may be trig-
gered from a blocking to conduction state for either polarity of
applied AC voltage with operating modes in Quadrants I, II,
and III.
This new chip construction provides two electrically separate
SCR structures, providing enhanced dv/dt characteristics while
retaining the advantages of a single-chip device.
All alternistors have glass-passivated junctions to ensure long-
term reliability and parameter stability. Teccor's glass-passivated
junctions offer a reliable barrier against junction contamination.
Teccor's TO-218X package is designed for heavy, steady power-
handling capability. It features large eyelet terminals for ease of
soldering heavy gauge hook-up wire. All the isolated packages
have a standard isolation voltage rating of 2500 V rms.
Variations of devices covered in this data sheet are available for
custom design applications. Consult the factory for further
information.
R
o
H
S
Features
•RoHS Compliant
• High surge current capability
• Glass-passivated junctions
• 2500 V ac isolation for L, J, and K Packages
• High commutating dv/dt
• High static dv/dt
*TO-220
*TO-218
*TO-218X
MT2 MT1
G
E4
TO-263
D2Pak
TO-252
D-Pak
TO-251
V-Pak
Alternistor Triacs Data Sheets
http://www.littelfuse.com E4 - 2 ©2004 Littelfuse, Inc.
+1 972-580-7777 Thyristor Product Catalog
See “General Notes” and “Electrical Specification Notes” on page E4 - 5.
IT(RMS)
Part Number
VDRM IGT IDRM
Isolated Non-isolated
(4)(16)
T0-220 TO-220
TO-251
V-Pak
TO-252
D-Pak
TO-263
D2Pak
(1)
Volts
(3) (7) (15) (17)
mAmps
(1) (18)
mAmps
QI QII QIII
TC =
25 °C
TC =
100 °C
TC =
125 °C
MAX See “Package Dimensions” section for variations. (11) MIN MAX MAX
6A
Q2006VH3 Q2006DH3 200 10 10 10 0.01 0.5 2
Q4006VH3 Q4006DH3 400 10 10 10 0.01 0.5 2
Q6006VH3 Q6006DH3 600 10 10 10 0.01 0.5 2
Q2006VH4 Q2006DH4 200 35 35 35 0.01 0.5 2
Q4006VH4 Q4006DH4 400 35 35 35 0.01 0.5 2
Q6006VH4 Q6006DH4 600 35 35 35 0.01 0.5 2
Q8006VH4 Q8006DH4 800 35 35 35 0.01 0.5 2
QK006VH4 QK006DH4 1000 35 35 35 0.02 2
Q2006LH4 Q2006RH4 Q2006NH4 200 35 35 35 0.01 0.5 2
Q4006LH4 Q4006RH4 Q4006NH4 400 35 35 35 0.01 0.5 2
Q6006LH4 Q6006RH4 Q6006NH4 600 35 35 35 0.01 0.5 2
Q8006LH4 Q8006RH4 Q8006NH4 800 35 35 35 0.01 0.5 2
QK006LH4 QK006RH4 QK006NH4 1000 35 35 35 0.02 3
8A
Q2008VH3 Q2008DH3 200 10 10 10 0.01 0.5 2
Q4008VH3 Q4008DH3 400 10 10 10 0.01 0.5 2
Q6008VH3 Q6008DH3 600 10 10 10 0.01 0.5 2
Q2008VH4 Q2008DH4 200 35 35 35 0.01 0.5 2
Q4008VH4 Q4008DH4 400 35 35 35 0.01 0.5 2
Q6008VH4 Q6008DH4 600 35 35 35 0.01 0.5 2
Q8008VH4 Q8008DH4 800 35 35 35 0.01 0.5 2
QK008VH4 QK008DH4 1000 35 35 35 0.02 2
Q2008LH4 Q2008RH4 Q2008NH4 200 35 35 35 0.01 0.5 2
Q4008LH4 Q4008RH4 Q4008NH4 400 35 35 35 0.01 0.5 2
Q6008LH4 Q6008RH4 Q6008NH4 600 35 35 35 0.01 0.5 2
Q8008LH4 Q8008RH4 Q8008NH4 800 35 35 35 0.01 0.5 2
QK008LH4 QK008RH4 QK008NH4 1000 35 35 35 0.02 3
10 A
Q2010LH5 Q2010RH5 Q2010NH5 200 50 50 50 0.01 0.5 2
Q4010LH5 Q4010RH5 Q4010NH5 400 50 50 50 0.01 0.5 2
Q6010LH5 Q6010RH5 Q6010NH5 600 50 50 50 0.01 0.5 2
Q8010LH5 Q8010RH5 Q8010NH5 800 50 50 50 0.01 0.5 2
QK010LH5 QK010RH5 QK010NH5 1000 50 50 50 0.02 3
12 A
Q2012LH5 Q2012RH5 Q2012NH5 200 50 50 50 0.01 0.5 2
Q4012LH5 Q4012RH5 Q4012NH5 400 50 50 50 0.01 0.5 2
Q6012LH5 Q6012RH5 Q6012NH5 600 50 50 50 0.01 0.5 2
Q8012LH5 Q8012RH5 Q8012NH5 800 50 50 50 0.01 0.5 2
QK012LH5 QK012RH5 QK012NH5 1000 50 50 50 0.02 3
MT1 MT2 GMT1 G
MT2
MT2 MT2
MT2
G
MT1
MT2
MT2
MT1
G
Data Sheets Alternistor Triacs
©2004 Littelfuse, Inc. E4 - 3 http://www.littelfuse.com
Thyristor Product Catalog +1 972-580-7777
See “General Notes” and “Electrical Specification Notes” on page E4 - 5.
VGT VTM IHIGTM PGM PG(AV) ITSM dv/dt(c) dv/dt tgt I2tdi/dt
(2) (6)
(15) (17)
(20)
Volts
(1) (5)
Volts
(1) (8)
(12)
mAmps
(14)
Amps
(14)
Watts Watts
(9) (13)
Amps
(1) (4) (13)
Volts/µSec
(1)
Volts/µSec
(10)
µSec Amps2Sec
(19)
Amps/µSec
TC = 25 °C 60/50 Hz TC = 100 °C TC = 125 °C
MAX MAX MAX MIN MIN TYP
1.3 1.6 15 1.6 18 0.4 65/55 20 100 75 417.5 70
1.3 1.6 15 1.6 18 0.4 65/55 20 100 75 417.5 70
1.3 1.6 15 1.6 18 0.4 65/55 20 75 50 417.5 70
1.3 1.6 35 1.6 18 0.5 65/55 25 500 400 417.5 70
1.3 1.6 35 1.6 18 0.5 65/55 25 500 400 417.5 70
1.3 1.6 35 1.6 18 0.5 65/55 25 400 300 417.5 70
1.3 1.6 35 1.6 18 0.5 65/55 25 300 200 417.5 70
1.3 1.6 35 1.6 18 0.5 65/55 25 150 417.5 70
1.3 1.6 35 1.6 18 0.5 85/80 25 750 600 430 70
1.3 1.6 35 1.6 18 0.5 85/80 25 575 450 430 70
1.3 1.6 35 1.6 18 0.5 85/80 25 425 350 430 70
1.3 1.6 35 1.6 18 0.5 85/80 25 300 250 430 70
1.3 1.6 35 1.6 18 0.5 85/80 25 150 430 70
1.3 1.6 15 1.6 18 0.4 85/80 20 100 75 4 30 70
1.3 1.6 15 1.6 18 0.4 85/80 20 100 75 4 30 70
1.3 1.6 15 1.6 18 0.4 85/80 20 75 50 4 30 70
1.3 1.6 35 1.6 18 0.5 85/80 25 750 400 4 30 70
1.3 1.6 35 1.6 18 0.5 85/80 25 575 450 4 30 70
1.3 1.6 35 1.6 18 0.5 85/80 25 425 350 4 30 70
1.3 1.6 35 1.6 18 0.5 85/80 25 300 250 4 30 70
1.3 1.6 35 1.6 18 0.5 85/80 25 150 4 30 70
1.3 1.6 35 2 20 0.5 100/83 25 500 400 4 41 70
1.3 1.6 35 2 20 0.5 100/83 25 500 400 4 41 70
1.3 1.6 35 2 20 0.5 100/83 25 400 300 4 41 70
1.3 1.6 35 2 20 0.5 100/83 25 300 200 4 41 70
1.3 1.6 35 2 20 0.5 100/83 25 150 4 41 70
1.3 1.6 50 220 0.5 120/110 30 1150 1000 460 70
1.3 1.6 50 220 0.5 120/110 30 1000 750 460 70
1.3 1.6 50 220 0.5 120/110 30 850 650 460 70
1.3 1.6 50 220 0.5 120/110 30 650 500 460 70
1.3 1.6 50 220 0.5 120/110 30 300 460 70
1.3 1.6 50 2 20 0.5 120/110 30 1150 1000 4 60 70
1.3 1.6 50 2 20 0.5 120/110 30 1000 750 4 60 70
1.3 1.6 50 2 20 0.5 120/110 30 850 650 4 60 70
1.3 1.6 50 2 20 0.5 120/110 30 650 500 4 60 70
1.3 1.6 50 2 20 0.5 120/110 30 300 4 60 70
Alternistor Triacs Data Sheets
http://www.littelfuse.com E4 - 4 ©2004 Littelfuse, Inc.
+1 972-580-7777 Thyristor Product Catalog
See “General Notes” and “Electrical Specification Notes” on page E4 - 5.
Test Conditions
di/dt — Maximum rate-of-change of on-state current
dv/dt — Critical rate-of-rise of off-state voltage at rated VDRM gate open
dv/dt(c) — Critical rate-of-rise of commutation voltage at rated VDRM
and IT(RMS) commutating di/dt = 0.54 rated IT(RMS)/ms; gate
unenergized
I2t — RMS surge (non-repetitive) on-state current for period of 8.3 ms
for fusing
IDRM — Peak off-state current gate open; VDRM = maximum rated value
IGT — DC gate trigger current in specific operating quadrants;
VD = 12 V dc
IGTM — Peak gate trigger current
IH — Holding current (DC); gate open
IT(RMS) — RMS on-state current conduction angle of 360°
ITSM — Peak one-cycle surge
PG(AV) — Average gate power dissipation
PGM — Peak gate power dissipation; IGT ≤ IGTM
tgt — Gate controlled turn-on time; IGT = 300 mA with 0.1 µs rise time
VDRM — Repetitive peak blocking voltage
VGT — DC gate trigger voltage; VD = 12 V dc
VTM — Peak on-state voltage at maximum rated RMS current
IT(RMS)
Part Number
VDRM IGT
Isolated Non-isolated
(4)(16)
T0-220
TO-218
(16) TO-218X TO-220
TO-263
D2Pak
(1)
Volts
(3) (7) (15) (17)
mAmps
QI QII QIII
MAX See “Package Dimensions” section for variations. (11) MAX
16 A
Q2016LH3 Q2016RH3 Q2016NH3 200 20 20 20
Q4016LH3 Q4016RH3 Q4016NH3 400 20 20 20
Q6016LH3 Q6016RH3 Q6016NH3 600 20 20 20
Q8016LH3 Q8016RH3 Q8016NH3 800 20 20 20
QK016LH3 QK016RH3 QK016NH3 1000 20 20 20
Q2016LH4 Q2016RH4 Q2016NH4 200 35 35 35
Q4016LH4 Q4016RH4 Q4016NH4 400 35 35 35
Q6016LH4 Q6016RH4 Q6016NH4 600 35 35 35
Q8016LH4 Q8016RH4 Q8016NH4 800 35 35 35
QK016LH4 QK016RH4 QK016NH4 1000 35 35 35
Q2016LH6 Q2016RH6 Q2016NH6 200 80 80 80
Q4016LH6 Q4016RH6 Q4016NH6 400 80 80 80
Q6016LH6 Q6016RH6 Q6016NH6 600 80 80 80
Q8016LH6 Q8016RH6 Q8016NH6 800 80 80 80
QK016LH6 QK016RH6 QK016NH6 1000 80 80 80
25 A
Q2025L6 Q2025K6 Q2025J6 Q2025R6 Q2025NH6 200 80 80 80
Q4025L6 Q4025K6 Q4025J6 Q4025R6 Q4025NH6 400 80 80 80
Q6025L6 Q6025K6 Q6025J6 Q6025R6 Q6025NH6 600 80 80 80
Q8025L6 Q8025K6 Q8025J6 Q8025R6 Q8025NH6 800 80 80 80
QK025L6 QK025K6 QK025R6 QK025NH6 1000 80 80 80
30 A
Q2030LH5 200 50 50 50
Q4030LH5 400 50 50 50
Q6030LH5 600 50 50 50
35 A
Q2035RH5 Q2035NH5 200 50 50 50
Q4035RH5 Q4035NH5 400 50 50 50
Q6035RH5 Q6035NH5 600 50 50 50
40 A
Q2040K7 Q2040J7 200 100 100 100
Q4040K7 Q4040J7 400 100 100 100
Q6040K7 Q6040J7 600 100 100 100
Q8040K7 Q8040J7 800 100 100 100
QK040K7 1000 100 100 100
MT1 MT2 G
MT1 G
MT2
MT1
G
MT2 MT1 G
MT2
MT2
MT2
MT2
MT1
G
Data Sheets Alternistor Triacs
©2004 Littelfuse, Inc. E4 - 5 http://www.littelfuse.com
Thyristor Product Catalog +1 972-580-7777
General Notes
• All measurements are made at 60 Hz with a resistive load at an
ambient temperature of +25 °C unless specified otherwise.
• Operating temperature range (TJ) is -40 °C to +125 °C.
• Storage temperature range (TS) is -40 °C to +125 °C.
• Lead solder temperature is a maximum of 230 °C for 10 seconds
maximum ≥1/16" (1.59 mm) from case.
• The case temperature (TC) is measured as shown in the dimen-
sional outline drawings. See “Package Dimensions” section.
Electrical Specification Notes
(1) For either polarity of MT2 with reference to MT1 terminal
(2) For either polarity of gate voltage (VGT) with reference to MT1
terminal
(3) See Gate Characteristics and Definition of Quadrants.
(4) See Figure E4.1 through Figure E4.4 for current rating at specific
operating temperature and Figure 4.16 for free air rating (no heat
sink).
(5) See Figure E4.5 and Figure E4.6 for iT and vT
.
(6) See Figure E4.7 for VGT versus TC.
(7) See Figure E4.8 for IGT versus TC.
(8) See Figure E4.9 for IH versus TC.
(9) See Figure E4.10 and Figure E4.11 for surge rating with specific
durations.
IDRM VGT VTM IHIGTM PGM PG(AV) ITSM dv/dt(c) dv/dt tgt I2tdi/dt
(1) (18)
mAmps
(2) (6)
(15) (17)
(20)
Volts
(1) (5)
Volts
(1) (8)
(12)
mAmps
(14)
Amps
(14)
Watts Watts
(9) (13)
Amps
(1) (4) (13)
Volts/µSec
(1)
Volts/µSec
(10)
µSec Amps2Sec
(19)
Amps/µSec
TC =
25 °C
TC =
100 °C
TC =
125 °C
TC =
25 °C
TC =
25 °C 60/50 Hz
TC =
100 °C
TC =
125 °C
MAX MAX MAX MAX MIN MIN TYP
0.05 0.5 21.5 1.6 35 220 0.5 200/167 20 500 400 3166 100
0.05 0.5 21.5 1.6 35 220 0.5 200/167 20 400 350 3166 100
0.05 0.5 21.5 1.6 35 220 0.5 200/167 20 300 250 3166 100
0.1 1 3 1.5 1.6 35 220 0.5 200/167 20 275 200 3166 100
0.1 31.5 1.6 35 220 0.5 200/167 20 200 3166 100
0.05 0.5 2 2 1.6 50 220 0.5 200/167 25 650 500 3166 100
0.05 0.5 2 2 1.6 50 220 0.5 200/167 25 600 475 3166 100
0.05 0.5 2 2 1.6 50 220 0.5 200/167 25 500 400 3166 100
0.1 1 3 2 1.6 50 220 0.5 200/167 25 425 350 3166 100
0.1 3 2 1.6 50 220 0.5 200/167 25 300 3166 100
0.05 0.5 22.5 1.6 70 220 0.5 200/167 30 1090 925 5166 100
0.05 0.5 22.5 1.6 70 220 0.5 200/167 30 1090 925 5166 100
0.05 0.5 22.5 1.6 70 220 0.5 200/167 30 1000 850 5166 100
0.1 1 3 2.5 1.6 70 220 0.5 200/167 30 700 475 5166 100
0.1 32.5 1.6 70 220 0.5 200/167 30 350 5166 100
0.05 0.5 2 2.5 1.8 100 2 20 0.5 250/208 30 875 600 5 259 100
0.05 0.5 2 2.5 1.8 100 2 20 0.5 250/208 30 875 600 5 259 100
0.05 0.5 2 2.5 1.8 100 2 20 0.5 250/208 30 800 520 5 259 100
0.1 1 3 2.5 1.8 100 2 20 0.5 250/208 30 700 475 5 259 100
0.1 3 2.5 1.8 100 2 20 0.5 250/208 30 400 5 259 100
0.05 0.5 2 2 1.4 75 220 0.5 350/290 20 650 500 3508 100
0.05 0.5 2 2 1.4 75 220 0.5 350/290 20 600 475 3508 100
0.05 0.5 2 2 1.4 75 220 0.5 350/290 20 500 400 3508 100
0.05 0.5 2 2 1.5 75 2 20 0.5 350/290 20 650 500 3 508 100
0.05 0.5 2 2 1.5 75 2 20 0.5 350/290 20 600 475 3 508 100
0.05 0.5 2 2 1.5 75 2 20 0.5 350/290 20 500 400 3 508 100
0.2 2 5 2.5 1.8 120 440 0.8 400/335 50 1100 700 5664 150
0.2 2 5 2.5 1.8 120 440 0.8 400/335 50 1100 700 5664 150
0.2 2 5 2.5 1.8 120 440 0.8 400/335 50 1000 625 5664 150
0.2 2 5 2.5 1.8 120 440 0.8 400/335 50 900 575 5664 150
0.2 52.5 1.8 120 440 0.8 400/335 50 500 5664 150
Alternistor Triacs Data Sheets
http://www.littelfuse.com E4 - 6 ©2004 Littelfuse, Inc.
+1 972-580-7777 Thyristor Product Catalog
(10) See Figure E4.12 for tgt versus IGT.
(11) See package outlines for lead form configurations. When ordering
special lead forming, add type number as suffix to part number.
(12) Initial on-state current = 400 mA dc for 16 A to 40 A devices and
100 mA for 6 A to 12 A devices.
(13) See Figure E4.1 through Figure E4.4 for maximum allowable case
temperature at maximum rated current.
(14) Pulse width ≤10 µs; IGT ≤ IGTM
(15) For 6 A to 12 A devices, RL = 60 Ω; 16 A and above, RL = 30 Ω
(16) 40 A pin terminal leads on K package can run 100 °C to 125 °C.
(17) Alternistor does not turn on in Quadrant IV.
(18) TC = TJ for test conditions in off state
(19) IGT = 200 mA for 6 A to 12 A devices and 500 mA for 16 A to 40 A
devices with gate pulse having rise time of ≤0.1 µs.
(20) Minimum non-trigger VGT at 125 °C is 0.2 V.
Gate Characteristics
Teccor triacs may be turned on in the following ways:
• In-phase signals (with standard AC line) using Quadrants I
and III
• Application of unipolar pulses (gate always negative), using
Quadrants II and III with negative gate pulses
In all cases, if maximum surge capability is required, gate pulses
should be a minimum of one magnitude above minimum IGT rat-
ing with a steep rising waveform (≤1 µs rise time).
If QIV and QI operation is required (gate always positive), see
Figure AN1002.8, “Amplified Gate” Thyristor Circuit.
Definition of Quadrants
Electrical Isolation
Teccor’s isolated alternistor packages withstand a minimum high
potential test of 2500 V ac rms from leads to mounting tab, over
the operating temperature range of the device. The following iso-
lation table shows standard and optional isolation ratings.
* UL Recognized File E71639
** For 4000 V isolation, use V suffix in part number.
* UL Recognized Product per UL File E71639
** For 4000 V isolation, use V suffix in part number.
Electrical Isolation
from Leads to Mounting Tab *
VACRMS
TO-218
Isolated
TO-220
Isolated
TO-218X
Isolated
2500 Standard Standard Standard
4000 N/A Optional ** N/A
MT2 POSITIVE
(Positive Half Cycle)
MT2 NEGATIVE
(Negative Half Cycle)
MT1
MT2
+ IGT
REF QII
MT1
IGT
GATE
MT2
REF
MT1
MT2
REF
MT1
MT2
REF
QI
QIV
QIII
ALL POLARITIES ARE REFERENCED TO MT1
(-)
IGT
GATE
(+)
IGT -
IGT
GATE
(-)
IGT
GATE
(+)
+
-
NOTE: Alternistors will not operate in QIV
Thermal Resistance (Steady State)
R θ JC [R θ JA] (TYP.) °C/W
Package Code KJLRDVN
Type
TO-218
Isolated *
TO-218X
Isolated *
TO-220
Isolated **
TO-220
Non-Isolated
TO-252
D-Pak
TO-251
V-Pak
TO-263
D2Pak
6 A 3.3 [50] 1.80 [45] 2.1 2.3 [64] 1.80
8 A 2.8 1.50 1.8 2.1 1.50
10 A 2.6 1.30 1.30
12 A 2.3 1.20 1.20
16 A 2.1 1.10 1.10
25 A 1.35 1.32 2.0 0.87 0.87
30 A 2.3
35 A 0.85
40 A 0.97 0.95
Data Sheets Alternistor Triacs
©2004 Littelfuse, Inc. E4 - 7 http://www.littelfuse.com
Thyristor Product Catalog +1 972-580-7777
Figure E4.1 Maximum Allowable Case Temperature versus
On-state Current (6 A to 12 A)
Figure E4.2 Maximum Allowable Case Temperature versus
On-state Current (8 A to 12 A)
Figure E4.3 Maximum Allowable Case Temperature versus
On-state Current (16 A)
Figure E4.4 Maximum Allowable Case Temperature versus
On-state Current (25 A to 40 A)
Figure E4.5 On-state Current versus On-state Voltage (Typical)
(6 A to 12 A)
Figure E4.6 On-state Current versus On-state Voltage (Typical)
(16 A to 40 A)
02468101214
0
60
70
80
90
100
110
120
130
RMS On-State Current [l
T(RMS)
] - AMPS
Maximum Allowable Case Temperature (T
C
) -
˚
C
12A TO-220 (ISOLATED)
10A TO-220 (NON-ISOLATED)
and D
2
PAK
6A TO-220 (ISOLATED)
6A TO-220
(NON-ISOLATED)
TO-263, TO-251
and TO-252
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360
˚
CASE TEMPERATURE: Measured as
shown on Dimensional Drawing
02468101214
0
60
70
80
90
100
110
120
130
RMS On-state Current [l
T(RMS)
] – Amps
Maximum Allowable Case
Temperature (T
C
) – ˚C
12 A TO-220 (Non-isolated)
and TO-263
10 A TO-220 (Isolated)
8 A TO-220 (Non-isolated),
TO-263, TO-251, and TO-252
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360˚
CASE TEMPERATURE: Measured as
shown on Dimensional Drawing
8 A TO-220 (Isolated)
0
60
70
80
90
100
110
120
130
0 5 10 15
RMS On-state Current [IT(RMS)] – Amps
Maximum Allowable
Case Temperature (TC) – ˚C
16A TO-220 (Non-isolated) and TO-263
16A TO-220 (Isolated)
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360˚
CASE TEMPERATURE: Measured as
shown on Dimensional Drawing
0 1020304050
50
60
70
80
90
100
110
120
130
RMS On-state Current [lT(RMS)] – Amps
Maximum Allowable Case Temperature (TC) – ˚C
35 A TO-220 (Non-isolated)
and TO-263
25 A and 30 A
TO-220 (Isolated)
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360˚
CASE TEMPERATURE: Measured as
shown on Dimensional Drawing
40 A TO-218
(Isolated)
25
25 A TO-220 (Non-isolated)
TO-218 (Isolated)
TO-263
0
2
6
8
10
12
14
16
18
20
0 0.6 0.8 1.0 1.2 1.4 1.6
Positive or Negative Instantaneous
On-state Voltage (vT) – Volts
Positive or Negative Instantaneous
On-state Current (iT) – Amps
T
C
= 25 ˚C
4
6 A to 12 A Devices
90
80
70
60
50
40
30
20
10
000.6 0.8 1.0 1.2 1.4 1.6
Positive or Negative Instantaneous
On-state Current (iT) – Amps
T
C
= 25˚C
1.8
Positive or Negative Instantaneous On-state Voltage (vT) – Volts
40 A Devices
16 A Devices
25 A to 35 A Devices
Alternistor Triacs Data Sheets
http://www.littelfuse.com E4 - 8 ©2004 Littelfuse, Inc.
+1 972-580-7777 Thyristor Product Catalog
Figure E4.7 Normalized DC Gate Trigger Voltage for all Quadrants
versus Case Temperature
Figure E4.8 Normalized DC Gate Trigger Current for all Quadrants
versus Case Temperature
Figure E4.9 Normalized DC Holding Current versus Case Temperature
Figure E4.10 Peak Surge Current versus Surge Current Duration
(6 A to 12 A)
Figure E4.11 Peak Surge Current versus Surge Current Duration
(16 A to 40 A)
Figure E4.12 Turn-on Time versus Gate Trigger Current (Typical)
0
.5
1.0
1.5
2.0
-65 -15 +65+25 +125-40Case Temperature (TC) – ˚C
VGT (TC = 25 ˚C)
Ratio of VGT
0
1.0
2.0
3.0
4.0
-65 -15 +65+25 +125
-40
Case Temperature (T
C
) – ˚C
I
GT
(T
C
= 25 ˚C)
Ratio of I
GT
0
1.0
2.0
3.0
4.0
-65 -15 +65+25 +125-40
Case Temperature (T
C
) – ˚C
I
H
(T
C
= 25 ˚C)
Ratio of I
H
INITIAL ON-STATE CURRENT
= 400 mA dc 16 A to 40 A Devices
= 100 mA dc 6 to 12A Devices
200
120
40
123456810 20 30 40 60 80 100 200 300 600 1000
80
60
50
100
8
6
5
10
30
20
4
1
3
2
Surge Current Duration – Full Cycles
Peak Surge (Non-Repetitive)
On-state Current (I
TSM
) – Amps
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS ON-STATE CURRENT [IT(RMS)]: Maximum
Rated Value at Specified Case Temperature
Notes:
1) Gate control may be lost during and
immediately following surge current
interval
2) Overload may not be repeated until
junction temperature has returned
to steady state rated value.
10 A to 12 A Devices
8 A TO-251
and TO-252
8 A Devices
6 A Devices
6 A TO-251
and TO-252
110
100 1000
10
20
30
40
50
60
80
100
250
300
400
1000
Surge Current Duration – Full Cycles
Peak Surge (Non-repetitive)
On-state Current (I
TSM
) – Amps
200
Notes:
1) Gate control may be lost during and
immediately following surge current
interval.
2) Overload may not be repeated until
junction temperature has returned to
steady-state rated value.
SUPPLY FREQUENCY: 60Hz Sinusoidal
LOAD: Resistive
RMS ON-STATE CURRENT [I
T(RMS)
]: Maximum
Rated Value at Specified Case Temperature
40 A Devices
35 A Devices
30 A Devices
25 A Devices
16 A Devices
0100 200 300 400 500
0
2
4
6
8
10
DC Gate Trigger Current (I
GT
) – mA
IGT = 80 to 100 mA
Typical Turn-on
Time (t
gt
) – µs
IGT = 10 mA to 35 mA
IGT = 50 mA
Data Sheets Alternistor Triacs
©2004 Littelfuse, Inc. E4 - 9 http://www.littelfuse.com
Thyristor Product Catalog +1 972-580-7777
Figure E4.13 Power Dissipation (Typical) versus On-state Current
(6 A to 12 A)
Figure E4.14 Power Dissipation (Typical) versus On-state Current
(16 A)
Figure E4.15 Power Dissipation (Typical) versus On-state Current
(25 A to 40 A)
Figure E4.16 Maximum Allowable Ambient Temperature versus
On-state Current
01234567891011121314151
6
0
2
4
6
8
10
12
14
16
18
RMS On-state Current [l
T(RMS)] – AmpsS
Average On-state Power
Dissipation [PD(AV)] – Watts
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360
˚
6A to 12A Devices
0246810 12 14 16
0
2
4
6
8
10
12
14
16
18
RMS On-state Current [I
T(RMS)
] – Amps
Average On-state Power
Dissipation [P
D (AV)
] – Watts
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or inductive
CONDUCTION ANGLE: 360˚
16A Devices
012
20 28 36
416 24 32 40
8
0
5
10
15
20
25
30
35
40
45
RMS On-State Current [I
T(RMS)
]—Amps
Average On-State Power
Dissipation [P
D(AV)
]—Watts
25 A
40 A
Current Waveform: Sinusoidal
Load: Resistive or Inductive
Conduction Angle: 360˚
30 A and
35 A Devices
120
100
80
60
40
25
20
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.
0
TO-220 Devices
RMS On-state Current [I
T (RMS)
] – Amps
Maximum Allowable Ambient Temperature (T
A
) – ˚C
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360
˚
FREE AIR RATING – NO HEATSINK
TO-251 Devices
Notes
