MPG06M-E3/73 - Vishay [General Semiconductor]

Document Number: 88682 For technical questions within your region, please contact one of the following: www.vishay.com

Revision: 15-Mar-11 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

Miniature Glass Passivated Junction Plastic Rectifier

MPG06A thru MPG06M

Vishay General Semiconductor

FEATURES

• Glass passivated chip junction

• Low forward voltage drop

• Low leakage current, typical IR less than 0.1 μA

• High forward surge capability

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• AEC-Q101 qualified

• Compliant to RoHS Directive 2002/95/EC and in

accordance to WEEE 2002/96/EC

TYPICAL APPLICATIONS

For use in general purpose rectification of power supplies,

inverters, converters, and freewheeling diodes application.

MECHANICAL DATA

Case: MPG06, molded epoxy over passivated chip

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS compliant, commercial grade

Base P/NHE3 - RoHS compliant, AEC-Q101 qualified

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

Polarity: Color band denotes cathode end

PRIMARY CHARACTERISTICS

IF(AV) 1.0 A

VRRM 50 V to 1000 V

IFSM 40 A

VF1.1 V

IR5.0 μA

TJ max. 150 °C

MPG06

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL MPG06A MPG06B MPG06D MPG06G MPG06J MPG06K MPG06M UNIT

Maximum repetitive peak

reverse voltage VRRM 50 100 200 400 600 800 1000 V

Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V

Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V

Maximum average forward

rectified current 0.375" (9.5 mm)

lead length at TA = 25 °C

IF(AV) 1.0 A

Peak forward surge current

8.3 ms single half sine-wave

superimposed on rated load

IFSM 40 A

Operating junction and

storage temperature range TJ, TSTG - 55 to + 150 °C

www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 88682

2DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 15-Mar-11

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

MPG06A thru MPG06M

Vishay General Semiconductor

Note

(1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, PCB mounted with 0.22" x 0.22"

(5.5 mm x 5.5 mm) copper pads

Note

(1) AEC-Q101 qualified

RATINGS AND CHARACTERISTICS CURVES

(TA = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL MPG06A MPG06B MPG06D MPG06G MPG06J MPG06K MPG06M UNIT

Maximum

instantaneous

forward voltage

1.0 A VF1.1 V

Maximum DC

reverse current

at rated DC

blocking voltage

TA = 25 °C

5.0

μA

TA = 125 °C 50

Typical reverse

recovery time

IF = 0.5 A, IR = 1.0 A,

Irr = 0.25 A trr 1.6 μs

Typical junction

capacitance 4.0 V, 1 MHz CJ10 pF

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL MPG06A MPG06B MPG06D MPG06G MPG06J MPG06K MPG06M UNIT

Typical thermal resistance RJA (1) 67 °C/W

RJL (1) 30

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

MPG06J-E3/54 0.202 54 5500 13" diameter paper tape and reel

MPG06J-E3/73 0.202 73 3000 Ammo pack packaging

MPG06JHE3/54 (1) 0.202 54 5500 13" diameter paper tape and reel

MPG06JHE3/73 (1) 0.202 73 3000 Ammo pack packaging

7550250 100 125 150 175

0.2

0.4

0.6

0.8

1.0

1.2

Ambient Temperature (°C)

Average Forward Rectied Current (A)

Capacitive

Loads

5.0

60 Hz

Resistive or Inductive Load

0.375" (9.5 mm) Lead Length

1 10010

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

= T

Max.

8.3 ms Single Half Sine-Wave

Rated Load

No Load Condition

Document Number: 88682 For technical questions within your region, please contact one of the following: www.vishay.com

Revision: 15-Mar-11 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

MPG06A thru MPG06M

Vishay General Semiconductor

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Characteristics

Fig. 5 - Typical Junction Capacitance

Fig. 6 - Typical Transient Thermal Impedance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

0.4 0.8 1.0 1.2 1.6 1.81.40.6

0.01

0.1

100

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

TJ = 150 °C

TJ = 25 °C

Pulse Width = 300 μs

1 % Duty Cycle

0.01

0.1

0 20 40 60 80 100

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Current (μA)

TJ = 125 °C

TJ = 25 °C

TJ = 75 °C

1 10 100

100

Reverse Voltage (V)

Junction Capacitance (pF)

TJ = 25 °C

f = 1.0 MHz

Vsig = 50 mVp-p

100

0.1

0.01 0.1 1 10 100

Transient Thermal Impedance (°C/W)

t - Pulse Duration (s)

0.100 (2.54)

0.090 (2.29)

DIA.

0.025 (0.635)

0.023 (0.584)

DIA.

1.0 (25.4)

MIN.

1.0 (25.4)

MIN.

0.125 (3.18)

0.115 (2.92)

MPG06

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.