TEN 30-4810WIN - TRACO Power

http://www.tracopower.com

Features

◆ Smallest encapsulated 30 W converter

◆ 2” x 1” x 0.4” shielded metal package

◆ Ultra wide 4:1 input voltage range

◆ Single- dual- and triple output models

◆ Very high efﬁciency up to 91%

◆ Operating temp. range –40°C to +75°C

◆ I/O isolation 1500 VDC

◆ Over temperature and

short circuit protection

◆ Remote On/Off

◆ Adjustable output voltage

◆ 3-year product warranty

DC/DC Converters

TEN 30WIN Series, 30 Watt

Page 1 of 4

Order code Input voltage

range

Output 1 Output 2 Output 3

Efﬁciency

typ.

TEN 30-2410WIN 3.3 VDC / 7.5 A 86 %

TEN 30-2411WIN 5.1 VDC / 6.0 A 88 %

TEN 30-2412WIN 12 VDC / 2.5 A 89 %

TEN 30-2413WIN 15 VDC / 2.0 A 89 %

TEN 30-2421WIN 9 – 36 VDC + 5 VDC / 3.0 A –5 VDC / 3.0 A 88 %

TEN 30-2422WIN (24 VDC nominal) +12 VDC / 1.25 A –12 VDC / 1.25 A 87 %

TEN 30-2423WIN +15 VDC / 1.0 A –15 VDC / 1.0 A 87 %

TEN 30-2433WIN 3.3 VDC / 5.0 A +12 VDC / 0.416 A –12 VDC / 0.416 A 86 %

TEN 30-2434WIN 3.3 VDC / 5.0 A +15 VDC / 0.333 A –15 VDC / 0.333 A 86 %

TEN 30-2431WIN 5 VDC / 4.0 A +12 VDC / 0.416 A –12 VDC / 0.416 A 88 %

TEN 30-2432WIN 5 VDC / 4.0 A +15 VDC / 0.333 A –15 VDC / 0.333 A 88 %

TEN 30-4810 WIN 3.3 VDC / 7.5 A 86 %

TEN 30-4811WIN 5.1 VDC / 6.0 A 88 %

TEN 30-4812WIN 12 VDC / 2.5 A 90 %

TEN 30-4813WIN 15 VDC / 2.0 A 91 %

TEN 30-4821WIN 18 – 75 VDC + 5 VDC / 3.0 A –5 VDC / 3.0 A 88 %

TEN 30-4822WIN (48 VDC nominal) +12 VDC / 1.25 A –12 VDC / 1.25 A 88 %

TEN 30-4823WIN +15 VDC / 1.0 A –15 VDC / 1.0 A 88 %

TEN 30-4833WIN 3.3 VDC / 5.0 A +12 VDC / 0.416 A –12 VDC / 0.416 A 86 %

TEN 30-4834WIN 3.3 VDC / 5.0 A +15 VDC / 0.333 A –15 VDC / 0.333 A 86 %

TEN 30-4831WIN 5 VDC / 4.0 A +12 VDC / 0.416 A –12 VDC / 0.416 A 88 %

TEN 30-4832WIN 5 VDC / 4.0 A +15 VDC / 0.333 A –15 VDC / 0.333 A 88 %

Models

The TEN 30WIN series is a family of high performance 30W dc-dc converter

modules featuring ultra wide 4:1 input voltage ranges in a compact low proﬁle case

with industry-standard footprint. Standard features include remote On/Off, output

voltage trimming, over voltage protection, under voltage lockout, over temperature

and short circuit protection.

Typical applications for these products are battery operated equipment and

distributed power architectures in communication and industrial electronics, every-

where where isolated, tightly regulated voltages are required and space is limited

on the PCB.

Scheme

UL 60950-1

http://www.tracopower.com

Input Specifications

Input current at no load ±12 & ±15 VDC models, 24 V: 30 mA typ.

(nominal input) other models, 24 V: 100 mA typ.

±12 & ±15 V models, 48 V: 15 mA typ.

other models, 48 V: 55 mA typ.

Input current at full load 3.3 VDC model, 24 V: 1250 mA typ.

other models, 24 V: 1500 mA typ.

3.3 VDC model, 48 V: 630 mA typ.

other models, 48 V: 750 mA typ.)

Start-up voltage / under voltage lockout 24 V models: 9 VDC / 8 VDC (typ.)

48 V models: 18 VDC / 16 VDC (typ.)

Surge voltage (100 msec. max.) 24 V models: 50 VDC max.

48 V models: 100 VDC max

Conducted noise (input) EN 55022 class A with input capacitor

24 V models: 4.7 µF / 50 V 1812 MLCC

48 V models: 2.2 µF / 100 V 1812 MLCC)

Output Specifications

Voltage set accuracy ±1 % (±5 % for auxilary outputs)

Output voltage adjustment (only for single output models) ±10 % with external resistor (see page 3)

Regulation – Input variation single- and dual output models: 0.25 % max.

triple output models: 1 % / 5 % max. (main / auxilary)

– Load variation single output models: 0.5 % max. (0 – 100 %)

dual output models balanced load: 1 % max. (0 – 100 %)

dual output models unbalanced load: 5 % max. (25 / 100 %)

triple output models (main/auxiliary): 1 % max. / 5 % max. (10 – 100 %)

Minimum load

single- and dual output models:

not required

triple output models:

10% of rated max current on each output

(operation at lower load condition will not damage

the converters. However, they may not meet all listed

specifications)

Temperature coefficient ±0.02 %/K max.

Ripple and noise (20 MHz Bandwidth) 1.5 V – 5.1 VDC models: 100 mVpk-pk. typ.

triple output models: 50 / 75 mVpk-pk typ. (main / auxilary)

other models: 150 mVpk-pk typ.

Start up time (nominal Vin and constant resistive load) 30 ms typ.

Transient response time (25% load change) 250 µs typ.

Short circuit protection indefinite (automatic recovery)

Over load protection 150 % of Iout max. typ.

Thermal shutdown at +115°C typ.

Over voltage protection 3.3 VDC models: 3.9 V

5.1 VDC models: 6.2 V

12 VDC models: 15 V

15 VDC models: 18 V

Capacitive load output models 3.3 VDC models: 20’000 µF max.

5.1 VDC models: 14’000 µF max.

12 & 15 VDC models: 2’000 µF max.

±5 VDC models: ±3’000 µF max.

other dual output models: ±1’300 µF max.

3.3 VDC triple output models: 15’000 / ±220 µF max. (main / auxilary)

5 VDC triple output models: 8’000 / ±220 µF max. (main / auxilary)

DC/DC Converters

TEN 30WIN 30 Watt

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Page 2 of 4

http://www.tracopower.com

DC/DC Converters

TEN 30WIN 30 Watt

General Specifications

Temperature ranges – Operating –40°C to +75°C

– Case temperature +105°C max.

– Storage –55°C to +125°C

Derating 3.5 %/K above +60°C

Humidity (non condensing) 95 % rel. H max.

Thermal inpedance – Natural convection 12°C/W

– Natural convection with heat sink 10°C/W

Reliability, calculated MTBF single- and dual output models: 1.2 Mio. h

(MIL-HDBK-217F, at +70°C, ground benign)

triple output models:

1.1 Mio. h

Isolation voltage (60 s) – Input / Output 1500 VDC

Isolation resistance – Input / Output 1000 MOhm min.

Isolation capacitance – Input / Output 1500 pF max.

Remote On/Off – On: 3.0 to 12 VDC or open circuit.

– Off: 0 to 1.2 VDC or short circuit pin 3 and pin 2

– Off idle current: 3 mA max.

Switching frequency (pulse width modulation PWM) single- and dual output models: 430 kHz typ.

triple output models:

400 kHz typ.

Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F

– Test conditions www.tracopower.com/products/mil810.pdf

Safety standards UL 60950-1, IEC/EN 60950-1

– Certification documents www.tracopower.com/overview/ten30win

Output Voltage Adjustment (for single output models only)

Trim

+Vout

Trim

Vout

Trim up Trim down

Page 3 of 4

Nominal output voltage at open Trim input!

Physical Specifications

Casing material copper, nickel plated

Baseplate material none conductive FR4

Potting material epoxy (UL 94V-0 -rated)

Weight 31 g (1.1oz )

Soldering temperature 265°C / 10 s max.

Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf

– RoHS RoHS Directive 2011/65/EU

Ru [kohm]

output 3.3V 5.1V 12V 15V

+5% 6.8 5.1 43 47

+10% 0.75 0.75 4.3 1.8

Rd [kohm]

output 3.3V 5.1V 12V 15V

–5% 8.2 6.2 56 56

–10% 0.62 0.82 5.6 2.2

Application note: www.tracopower.com/overview/ten30win

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

Outline Dimensions

Rev. June 29, 2018

Dimensions in [mm], () = Inch

Pin diameter: 1.0 ±0.1 (0.04 ±0.004)

Pin pitch tolerances: ±0.25 (± 0.01)

Case tolerances: ±0.5 (±0.02)

Page 4 of 4

DC/DC Converters

TEN 30WIN 30 Watt

Bottom View

456

5.6

(0.22)

10.2

(0.4)

50.8

(2.0)

45.72

(1.8)

2.5

(0.1)

2.54

(0.1)

5.08

(0.2)

15.24

(0.6)

10.16

(0.4)

20.32

(0.8)

Bottom View

457

7.62

(0.3)

5.08

(0.2)

12.7

(0.5)

5.08

(0.2)

25.4

(1.0)

25.4

(1.0)

Pin Single Dual Triple

1+Vin (Vcc) +Vin (Vcc) +Vin (Vcc)

2–Vin (GND) –Vin (GND) –Vin (GND)

Remote On/Off Remote On/Off Remote On/Off

4+Vout 1 Output 1 Output 2

5–Vout 1 Common Output 3

6Trim Output 2 Common

7No pin No pin Output 1

Pin-Out

Single- and dual

output models

56.0 (2.2) max.

14.5 (0.57)

16.8 (0.66)

max.

Converter

Heat-sink

Thermal pad

Clamp

Note:

Before attaching the heatsink, the product

label on converter has to be removed for

optimal performance.

For volume orders we can supply the

converters with heatsink already mounted.

Please contact us for a relative quotation.

Order code: TEN-HS1

(cont.: heat-sink, thermal pad, 2 clamps)

Material: Aluminum

Finish: Anodic treatment (black)

Weight: 17g (0.60oz) without converter

Thermal impedance after assembling: 10 K/W

Heat-Sink (Option)

Triple output

models

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TRACO Power:

TEN 30-2412WIN TEN 30-2432WIN TEN 30-2411WIN TEN 30-4822WIN TEN 30-4812WIN TEN 30-2423WIN

TEN 30-2410WIN TEN 30-2431WIN TEN 30-4833WIN TEN 30-2409WIN TEN 30-4807WIN TEN 30-2433WIN TEN

30-4809WIN TEN 30-4832WIN TEN 30-4831WIN TEN 30-2407WIN TEN 30-2434WIN TEN 30-4823WIN TEN 30-

4821WIN TEN 30-4834WIN TEN 30-2413WIN TEN 30-4810WIN TEN 30-2422WIN TEN 30-2421WIN TEN 30-

4811WIN TEN 30-4813WIN