Surface Mount
Monolithic Amplier
Page 1 of 4
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
simplified schematic and pin description
Function Pin Number Description
RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen
for the frequency of operation.
RF-OUT and DC-IN 3
RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking
capacitor is necessary for proper operation. An RF choke is needed to feed DC bias
without loss of RF signal due to the bias connection, as shown in “Recommended
Application Circuit”.
GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB
Design” to reduce ground path inductance for best performance.
GROUND
RF IN
RF-OUT and DC-IN
REV. A
M108520
ED-11756/3E
GALI-24+
110118
DC-6 GHz
CASE STYLE: DF782
PRICE: $1.75 ea. QTY. (20)
Product Features
• High gain, 25 dB typ. at 100 MHz
• High IP3, 35 dBm typ.
• High Pout, P1dB 19 dBm typ.
• Internally Matched to 50 Ohms
• Transient protected
• Excellent ESD Protection
• Unconditionally stable
• Aqueous washable
• Protected by US patent 6,943,629
Typical Applications
• Base station infrastructure
• Portable Wireless
• CATV & DBS
• MMDS & Wireless LAN
General Description
Gali 24+ (RoHS compliant) is a wideband amplier offering high dynamic range. Lead nish is SnAgNi.
It has repeatable performance from lot to lot and is enclosed in a SOT-89 package. It uses patented
Transient Protected Darlington conguration and is fabricated using InGaP HBT technology. Expected
MTBF is 3,000 years at 85°C case temperature. Gali 24+ is designed to be rugged for ESD and supply
switch-on transients.
Gali 24+
3 RF-OUT & DC-IN
2 GROUND
1 RF-IN
4
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Monolithic InGaP HBT MMIC Amplier
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
Page 2 of 4
Electrical Specications at 25°C and 80mA, unless noted
Parameter Min. Typ. Max. Units Cpk
Frequency Range* DC 6 GHz
Gain f=0.1 GHz 24.0 25.3 26.6 dB >1.5
f=1 GHz 22.6
f=2 GHz 18.1 19.1 20.1
f=3 GHz 16.6
f=4 GHz 14.2 14.9 15.6
f=6 GHz 12.4
Magnitude of Gain Variation versus Temperature
(values are negative)
f=0.1 GHz 0.0021 dB/°C
f=1 GHz 0.0035
f=2 GHz 0.0045 0.0090
f=3 GHz 0.0056
f=4 GHz 0.0074
f=6 GHz 0.0154
Input Return Loss f=0.1 GHz 21.6 dB
f=1 GHz 20.4
f=2 GHz 14 17.5
f=3 GHz 15.4
f=4 GHz 14.9
f=6 GHz 19.0
Output Return Loss f=0.1 GHz 18.5 dB
f=1 GHz 11.5
f=2 GHz 79.1
f=3 GHz 8.8
f=4 GHz 8.8
f=6 GHz 7.2
Reverse Isolation f=2 GHz 26.7 dB
Output Power @1 dB compression f=0.1 GHz 18.3 19.3 dBm >1.5
f=1 GHz 18.2 19.2
f=2 GHz 18.4 19.4
f=3 GHz 19.3
f=4 GHz 18.1
f=6 GHz 14.7
Saturated Output Power
(at 3dB compression)
f=0.1 GHz 21.1 dBm
f=1 GHz 20.9
f=2 GHz 21.0
f=3 GHz 20.4
f=4 GHz 19.1
f=6 GHz 16.0
Output IP3 f=0.1 GHz 30.4 33.8 dBm >1.5
f=1 GHz 31.5 35.0
f=2 GHz 32.7 36.3
f=3 GHz 35.3
f=4 GHz 33.1
f=6 GHz 30.3
Noise Figure f=0.1 GHz 4.2 5.2 dBm >1.5
f=1 GHz 4.3
f=2 GHz 4.2 5.2
f=3 GHz 4.3
f=4 GHz 4.5 5.5
f=6 GHz 5.3
Group Delay f=2 GHz 97 psec
Recommended Device Operating Current 80 mA
Device Operating Voltage 5.4 5.8 6.2 V >1.5
Device Voltage Variation vs. Temperature at 80mA -3.6 mV/°C
Device Voltage Variation vs Current at 25°C 3.3 mV/mA
Thermal Resistance, junction-to-case164 °C/W
Parameter Ratings
Operating Temperature* -45°C to 85°C
Storage Temperature -65°C to 150°C
Operating Current 160mA
Power Dissipation 1W
Input Power 13 dBm
Note: Permanent damage may occur if any of these limits are exceeded.
These ratings are not intended for continuous normal operation.
1Case is dened as ground leads.
*Based on typical case temperature rise 7°C above ambient.
Absolute Maximum Ratings
*Guaranteed specication DC-6 GHz. Low frequency cut off determined by external coupling capacitors.
Gali 24+
Monolithic InGaP HBT MMIC Amplier
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
Page 3 of 4
R BIAS
Vcc “1%” Res. Values (ohms)
for Optimum Biasing
8 28.7
941.2
10 53.7
11 66.5
12 78.7
13 90.9
14 105
15 115
16 127
17 140
18 154
19 165
20 178
Suggested Layout for PCB Design: PL-019
Recommended Application Circuit
Test Board includes case, connectors, and components (in bold) soldered to PCB
Plastic package, exposed paddle, lead nish: tin/silver/nickel
Evaluation Board: TB-409-24+
Tape & Reel: F55
7” reels with 20, 50, 100, 200, 500, 1K devices.
Additional Detailed Technical Information
Additional information is available on our web site. To access this information enter the model number on
our web site home page.
Environmental Ratings: ENV08T2
Product Marking
Performance data, graphs, s-parameter data set (.zip le)
Case Style: DF782
4
2
3
1
C block
IN
C block
Ibias
OUT
Vd
R FC (Optional)
C bypas s
Vcc
R bias (R equired)
Gali 24+
4
1 2 3
24
Markings in addition to model number designation may appear for internal quality control purposes.
Monolithic InGaP HBT MMIC Amplier
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
Page 4 of 4
ESD Rating
Human Body Model (HBM): Class 1C (1000v to < 2000v) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M2 (100v to < 200v) in accordance with ANSI/ESD STM 5.2 - 1999
No. Test Required Condition Standard Quantity
1 Visual Inspection Low Power Microscope
Magnication 40x
MIP-IN-0003
(MCT spec) 45 units
2 Electrical Test Room Temperature SCD
(MCL spec) 45 units
3 SAM Analysis Less than 10% growth in term of
delamination
J-Std-020C
(Jedec Standard) 45 units
4Moisture Sensitivity
Level 1
Bake at 125°C for 24 hours
Soak at 85°C/85%RH for 168 hours
Reflow 3 cycles at 260°C peak
J-Std-020C
(Jedec Standard) 45 units
Visual
Inspection Electrical Test SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection Electrical Test SAM Analysis
Start
MSL Test Flow Chart
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C
Gali 24+