AOD464 N-Channel Enhancement Mode Field Effect Transistor General Description Features The AOD464 uses advanced trench technology and design to provide excellent RDS(ON) with low gate charge. This device is suitable for use in high voltage synchronous rectification , load switching and general purpose applications. VDS (V) = 105V ID = 40 A (VGS =10V) RDS(ON) < 28 m (VGS =10V) @ 20A RDS(ON) < 31 m (VGS = 6V) 100% UIS Tested! 100% Rg Tested! -RoHS Compliant -Halogen Free* TO-252 D-PAK Top View D Bottom View D G S G S S G Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Symbol VDS Drain-Source Voltage VGS Gate-Source Voltage TC=25C Continuous Drain Current Avalanche Current C C Repetitive avalanche energy L=0.1mH C TC=25C Power Dissipation B Junction and Storage Temperature Range Alpha & Omega Semiconductor, Ltd. V A 28 IAR 20 A EAR 20 mJ 80 100 2.3 W 1.5 TJ, TSTG -55 to 175 Symbol t 10s Steady-State Steady-State W 50 PDSM TA=70C Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A Maximum Junction-to-Case B 25 ID IDM PD TC=100C TA=25C Power Dissipation A Units V 40 TC=100C Pulsed Drain Current Maximum 105 RJA RJC Typ 15 45 1 C Max 18 55 1.5 Units C/W C/W C/W www.aosmd.com AOD464 Electrical Characteristics (TJ=25C unless otherwise noted) Parameter Symbol STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage Conditions Min ID=10mA, VGS=0V 105 1 Zero Gate Voltage Drain Current IGSS Gate-Body leakage current VDS=0V, VGS=25V VGS(th) Gate Threshold Voltage VDS=VGS, ID=250A 2.5 ID(ON) On state drain current VGS=10V, VDS=5V 80 TJ=55C VGS=10V, ID=20A TJ=125C Static Drain-Source On-Resistance VGS=6V, ID=20A gFS Forward Transconductance VSD Diode Forward Voltage IS=1A, VGS=0V Maximum Body-Diode Continuous Current IS VDS=5V, ID=20A DYNAMIC PARAMETERS Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance SWITCHING PARAMETERS Qg(10V) Total Gate Charge Qgs Gate Source Charge Max VGS=0V, VDS=0V, f=1MHz VGS=10V, VDS=50V, ID=20A A 5 100 nA 3.2 4 V 21.5 28 32 40 24 31 m 1 V 55 A 2445 pF A m 50 0.73 2038 VGS=0V, VDS=25V, f=1MHz Units V VDS=84V, VGS=0V IDSS RDS(ON) Typ S 204 pF 85 pF 1.3 1.56 38.5 46 nC 8 nC Qgd Gate Drain Charge 10 nC tD(on) Turn-On DelayTime 12.7 ns tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf Turn-Off Fall Time trr Body Diode Reverse Recovery Time IF=20A, dI/dt=100A/s 59.6 Qrr Body Diode Reverse Recovery Charge IF=20A, dI/dt=100A/s 161 VGS=10V, VDS=50V, RL=2.7, RGEN=3 8.2 ns 31.5 ns 11.2 ns 74 ns nC A: The value of R JA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25C. The Power dissipation P DSM is based on R JA and the maximum allowed junction temperature of 150C. The value in any given application depends on the user's specific board design, and the maximum temperature of 175C may be used if the PCB allows it. B. The power dissipation P D is based on T J(MAX)=175C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C: Repetitive rating, pulse width limited by junction temperature T J(MAX)=175C. D. The R JA is the sum of the thermal impedence from junction to case R JC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300 s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of T J(MAX)=175C. G. The maximum current rating is limited by bond-wires. H. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with T A=25C. The SOA curve provides a single pulse rating. *This device is guaranteed green after data code 8X11 (Sep 1 ST 2008). Rev1: Sep. 2008 THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev0: July2005 Alpha & Omega Semiconductor, Ltd. www.aosmd.com AOD464 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 100 25 10V 80 VDS=5V 20 6V 15 ID (A) ID(A) 60 125C 10 40 5V 5 20 25C VGS=4.5V 0 0 0 1 2 3 4 2 5 VDS (Volts) Fig 1: On-Region Characteristics 2.5 3 3.5 4 4.5 5 VGS(Volts) Figure 2: Transfer Characteristics 40 2.4 Normalized On-Resistance RDS(ON) (m) 2.2 30 VGS=6V 20 VGS=10V VGS=10V, 20A 2 1.8 VGS=6V,20A 1.6 1.4 1.2 1 10 0 10 20 30 0.8 40 0 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 25 75 100 125 150 175 Temperature (C) Figure 4: On-Resistance vs. Junction Temperature 1.0E+02 60 ID=20A 1.0E+01 125C 50 1.0E+00 IS (A) 125C RDS(ON) (m) 50 40 1.0E-01 25C 1.0E-02 30 1.0E-03 25C 1.0E-04 20 0.0 4 8 12 16 20 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage Alpha & Omega Semiconductor, Ltd. 0.2 0.4 0.6 0.8 1.0 1.2 VSD (Volts) Figure 6: Body-Diode Characteristics www.aosmd.com AOD464 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 3 10 VDS=50V ID=20A Ciss Capacitance (nF) VGS (Volts) 8 6 4 2 1 Coss 2 0 0 10 20 30 0 40 0 20 40 60 80 VDS (Volts) Figure 8: Capacitance Characteristics Qg (nC) Figure 7: Gate-Charge Characteristics 1000 Crss 300 TJ(Max)=175C, TA=25C TJ(Max)=175C TC=25C 10s RDS(ON) limited 100s DC 1ms, DC Power (W) ID (Amps) 100 10 100 200 100 1 0 0.0001 0.1 0.1 10 100 1000 VDS (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note F) ZJC Normalized Transient Thermal Resistance 10 1 D=Ton/T TJ,PK=TA+PDM.ZJC.RJC RJC=1.5C/W 0.001 0.01 0.1 1 10 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toCase (Note F) In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 1 PD 0.1 Ton Single Pulse 0.01 0.00001 0.0001 0.001 T 0.01 0.1 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Alpha & Omega Semiconductor, Ltd. www.aosmd.com AOD464 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 150 tA = L ID BV - V DD 40 Power Dissipation (W) ID(A), Peak Avalanche Current 60 TA=25C TA=150C 20 0 0.000001 0.00001 0.0001 100 50 0 0.001 0 25 50 75 100 125 150 175 TCASE (C) Figure 13: Power De-rating (Note B) 50 100 40 80 Power (W) Current rating ID(A) Time in avalanche, tA (s) Figure 12: Single Pulse Avalanche capability 30 20 TA=25C 60 40 20 10 0 0.01 0 0 25 50 75 100 125 150 TCASE (C) Figure 14: Current De-rating (Note B) 0.1 1 10 100 1000 Pulse Width (s) Figure 15: Single Pulse Power Rating Junction-toAmbient (Note H) 175 ZJA Normalized Transient Thermal Resistance 100 10 D=Ton/T TJ,PK=TA+PDM.ZJA.RJA RJA=55C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 1 0.1 PD 0.01 0.001 0.00001 Single Pulse 0.0001 0.001 Ton 0.01 0.1 1 T 10 100 1000 Pulse Width (s) Figure 16: Normalized Maximum Transient Thermal Impedance (Note H) Alpha & Omega Semiconductor, Ltd. www.aosmd.com AOD464 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - VDC DUT Qgs Qgd - Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs 90% + Vdd VDC Rg - 10% Vgs Vgs td(on) tr td(off) ton tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 EAR= 1/2 LIAR Vds BVDSS Vds Id Vgs Vgs + Vdd VDC Rg - I AR Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vds - Isd Vgs Isd L Vgs Ig Alpha & Omega Semiconductor, Ltd. + Vdd VDC - IF t rr dI/dt I RM Vdd Vds www.aosmd.com