F1772 X2
www.vishay.com Vishay Roederstein
Revision: 16-Aug-17 1Document Number: 28161
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Interference Suppression Film Capacitor - Class X2
Radial MKT 310 VAC - High Stability Grade
FEATURES
• 15 mm to 37.5 mm lead pitch
• Internal series construction
• AEC-Q200 qualified for C 470 nF
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
High stability grade for continuous across the line X2
applications.
See also application note: www.vishay.com/doc?28153
Note
•For more detailed data and test requirements, contact rfi@vishay.com
QUICK REFERENCE DATA
Capacitance range (E12 series) 0.01 µF to 2.2 µF
(preferred values acc. to E6)
Capacitance tolerance ± 10 %, ± 20 % (± 5 % on request)
Rated AC voltage 310 VAC; 50 Hz to 60 Hz
Permissible DC voltage 800 VDC at 85 °C
630 VDC at 110 °C
Climatic testing class according to IEC 60068-1 40/110/56/C
Maximum application temperature 110 °C
Reference standards
IEC 60384-14 ed-4 and EN 60384-14
IEC 60065 pass. flamm. class C
CSA-E384-14
UL 60384-14
Dielectric Polyester film
Electrodes Metallized
Construction
Series construction
Encapsulation Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
Leads Tinned wire
Marking
C-value; tolerance; rated voltage; sub-class; manufacturer’s type;
code for dielectric material; manufacturer location, year and week;
manufacturer’s logo or name; safety approvals
DIMENSIONS in millimeters
Pitch
P ± 0.4
h
lt
l
Ø dt
w
F1772 X2
www.vishay.com Vishay Roederstein
Revision: 16-Aug-17 2Document Number: 28161
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
COMPOSITION OF CATALOG NUMBER
Notes
• For detailed tape specifications refer to packaging information www.vishay.com/doc?28139
(1) Taped on reel pitch 27.5 mm is not available
(2) Same capacitance values 0.15 µF are available in two different pitch sizes and dimensions
Note
• See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
SPECIFIC REFERENCE DATA
DESCRIPTION VALUE
Rated AC voltage (URAC)310 V
Permissible DC voltage (URDC)630 V
Tangent of loss angle 100 x 10-4 at 1 kHz
Rated voltage pulse slope at (dU/dt)R 435 VDC 100 V/µs
R between leads, for C 0.33 µF at 100 V; 1 min > 15 000 M
RC between leads, C > 0.33 µF at 100 V; 1 min > 5000 s
R between leads and case; 100 V; 1 min > 30 000 M
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s
C 0.47 µF 2200 V; for 1 min
C > 0.47 µF 2150 V; for 1 min
Withstanding (AC) voltage between leads and case 2120 V; 1 min
Maximum application temperature 110 °C
F 1772 X XX X X X X
CAPACITANCE
(numerically)
Example:
468 = 680 nF
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
TYPE
PACKAGING (Loose)
Tolerance
Example: F17724152215 means 0.15 µF, ± 20 %; standard pitch 22.5 mm; lead length 15 mm - 1 mm;
F17724152265 means 0.15 µF, ± 20 %; reduced pitch 15.0 mm; lead length 15 mm - 1 mm
Lead length
(mm)
± 10 %
2004
2000
2015
2030
2204 4 - 1
6 - 1
15 - 1
30 + 5
2200
2215
2230
± 20 %
Standard
pitch size
and
dimension
2264 4 - 1
6 - 1
15 - 1
30 + 5
2260
2265
2263
2164
2160
2165
2163
Reduced
pitch size
and
dimension (2)
PACKAGING (Taped on reel) (1)
Tolerance Taping height
(mm)
± 10 %
2900
2901
16.5
18.5
2290
2291
± 20 %
Standard
pitch size
and
dimension
16.5
18.5
2960
2961
2970
2971
Reduced
pitch size
and
dimension (2)
F1772 X2
www.vishay.com Vishay Roederstein
Revision: 16-Aug-17 3Document Number: 28161
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL DATA AND ORDERING INFORMATION
URAC
(V)
CAP.
(μF)
PITCH
(mm)
DIMENSIONS (4)
w x h x l
MAX. (mm)
MASS (3)
(g)
SPQ
(pieces)
SHORT LEAD
ORDERING CODE
BULK
LEAD LENGTH
6 mm - 1 mm (1)(2)
310
dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 %
0.010 15 5.0 x 11.0 x 17.5 1.4 750 F17723102000
0.012 15 5.0 x 11.0 x 17.5 1.4 750 F17723122000
0.015 15 5.0 x 11.0 x 17.5 1.4 750 F17723152000
0.018 15 5.0 x 11.0 x 17.5 1.4 750 F17723182000
0.022 15 5.0 x 11.0 x 17.5 1.4 750 F17723222000
0.027 15 5.0 x 11.0 x 17.5 1.4 750 F17723272000
0.033 15 5.0 x 11.0 x 17.5 1.4 750 F17723332000
0.039 15 6.0 x 12.0 x 17.5 2.0 500 F17723392000
0.047 15 6.0 x 12.0 x 17.5 2.0 500 F17723472000
0.056 15 6.0 x 12.0 x 17.5 2.0 500 F17723562000
dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 %
0.068 15 7.0 x 13.5 x 17.5 2.4 450 F17723682000
0.082 15 8.5 x 15.0 x 17.5 2.7 300 F17723822000
0.10 15 8.5 x 15.0 x 17.5 2.7 325 F17724102000
0.12 15 8.5 x 15.0 x 17.5 2.7 300 F17724122000
0.15 15 8.5 x 15.0 x 17.5 2.7 300 F17724152160
0.15 22.5 7.0 x 16.5 x 26.0 4.1 235 F17724152000
0.18 22.5 7.0 x 16.5 x 26.0 4.1 235 F17724182000
0.22 15 10.0 x 16.5 x 17.5 3.0 235 F17724222160
0.22 22.5 8.5 x 16.5 x 26.5 4.6 200 F17724222000
0.27 22.5 10.0 x 19.5 x 26.0 6.7 170 F17724272000
0.33 15 13.5 x 22.5 x 18.0 5.5 185 F17724332160
0.33 22.5 10.0 x 19.5 x 26.0 6.7 170 F17724332000
0.39 27.5 11.0 x 21.0 x 31.0 9.1 125 F17724392000
0.47 22.5 12.0 x 22.0 x 26.0 13.0 110 F17724472160
0.47 27.5 11.0 x 21.0 x 31.0 9.1 125 F17724472000
0.56 27.5 11.0 x 21.0 x 31.0 9.1 125 F17724562000
0.68 22.5 15.5 x 26.5 x 26.5 13.5 110 F17724682160
0.68 27.5 13.0 x 23.0 x 31.0 12.9 110 F17724682000
0.82 27.5 13.0 x 23.0 x 31.0 12.9 110 F17724822000
1.0 22.5 15.5 x 26.5 x 26.5 13.5 110 F17725102160
1.0 27.5 15.0 x 25.0 x 31.5 15.0 100 F17725102000
1.2 37.5 14.5 x 24.5 x 41.5 18.9 80 F17725122000
1.5 27.5 18.0 x 28.0 x 31.0 19.0 85 F17725152160
1.5 37.5 15.5 x 28.5 x 41.5 24.0 70 F17725152000
1.8 37.5 15.5 x 28.5 x 41.5 24.0 70 F17725182000
2.2 27.5 21.0 x 31.0 x 31.0 28.0 70 F17725222160
2.2 37.5 18.0 x 32.5 x 41.5 31.6 60 F17725222000
dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 %
0.010 15 5.0 x 11.0 x 17.5 1.4 750 F17723102200
0.015 15 5.0 x 11.0 x 17.5 1.4 750 F17723152200
0.022 15 5.0 x 11.0 x 17.5 1.4 750 F17723222200
0.033 15 5.0 x 11.0 x 17.5 1.4 750 F17723332200
0.047 15 5.0 x 11.0 x 17.5 1.4 750 F17723472200
0.068 15 6.0 x 12.0 x 17.5 2.0 600 F17723682200
0.10 15 6.0 x 12.0 x 17.5 2.0 600 F17724102200
F1772 X2
www.vishay.com Vishay Roederstein
Revision: 16-Aug-17 4Document Number: 28161
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• SPQ = Standard Packing Quantity
• For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
(1) For further packaging see table “Composition of Catalog Number”
(2) Further information about packaging quantities with different lead length and / or taped versions, see document “Packing Quantities”
www.vishay.com/doc?27608
(3) Weight for short lead product only
(4) For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
310
dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 %
0.15 15 8.5 x 15.0 x 17.5 2.7 325 F17724152260
0.15 22.5 6.0 x 15.5 x 26.0 3.3 260 F17724152200
0.22 15 10.0 x 16.5 x 17.5 4.5 300 F17724222260
0.22 22.5 7.0 x 16.5 x 26.0 4.1 235 F17724222200
0.33 15 13.5 x 22.5 x 18.0 5.5 185 F17724332260
0.33 22.5 8.5 x 18.0 x 26.0 5.3 190 F17724332200
0.47 22.5 10.0 x 19.5 x 26.0 6.7 170 F17724472260
0.47 27.5 9.0 x 19.0 x 31.5 6.8 160 F17724472200
0.68 22.5 12.0 x 22.0 x 26.0 13.4 110 F17724682260
0.68 27.5 11.0 x 21.0 x 31.0 12.9 125 F17724682200
1.0 22.5 15.5 x 26.5 x 26.5 13.5 110 F17725102260
1.0 27.5 15.0 x 25.0 x 31.5 15.0 100 F17725102200
1.5 27.5 18.0 x 28.0 x 31.5 19.0 85 F17725152260
1.5 37.5 14.5 x 24.5 x 41.5 18.9 80 F17725152200
2.2 27.5 21.0 x 31.0 x 31.0 28.0 70 F17725222260
2.2 37.5 15.5 x 28.5 x 41.5 24.0 70 F17725222200
APPROVALS
SAFETY APPROVALS X2 VOLTAGE VALUE FILE NUMBERS LINK
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-4) 310 VAC 0.01 µF to 2.2 µF X2 40005079 www.vishay.com/doc?28196
UL 60384-14 310 VAC 0.01 µF to 2.2 µF X2 E354331 www.vishay.com/doc?28191
CSA-E 384-14 310 VAC 0.01 µF to 2.2 µF X2 E354331
CB test-certificate 310 VAC 0.01 µF to 2.2 µF X2 DE1-58410 www.vishay.com/doc?28226
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
ELECTRICAL DATA AND ORDERING INFORMATION
URAC
(V)
CAP.
(μF)
PITCH
(mm)
DIMENSIONS (4)
w x h x l
MAX. (mm)
MASS (3)
(g)
SPQ
(pieces)
SHORT LEAD
ORDERING CODE
BULK
LEAD LENGTH
6 mm - 1 mm (1)(2)
F1772 X2
www.vishay.com Vishay Roederstein
Revision: 16-Aug-17 5Document Number: 28161
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139.
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that stand-off pips are in good contact with the printed-circuit
board:
• For pitches 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
SPACE REQUIREMENTS FOR PRINTED-CIRCUIT BOARD APPLICATIONS AND DIMENSION
TOLERANCES
For the maximum product dimensions and maximum space requirements for length (lmax.), width (wmax.) and height (hmax.)
following tolerances must be taken in account in the envelopment of the components as shown in the drawings below.
• For products with pitch 15 mm,w = l = 0.3 mm, and h = 0.1 mm
• For products with15 mm <pitch 27.5 mm, w = l = 0.5 mm, and h = 0.1 mm
• For products withpitch = 37.5 mm,w = l = 0.7 mm, and h = 0.5 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
For the minimum product dimensions for length (lmin.), width (wmin.) and height (hmin.) following tolerances of the components
are valid:
lmin. = l - l, wmin. = w - w, and hmin. = h - h following
• For products with pitch 10 mm, l = 0.3 mm, and w = h = 0.3 mm
• For products with pitch = 15 mm, l = 0.5 mm, and w = h = 0.5 mm
• For products with15 mm <pitch 27.5 mm, l = 1.0 mm and w = h = 0.5 mm
• For products withpitch = 37.5 mm,l = 1.0 mm and w = h = 1.0 mm
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note: “Soldering Guidelines for Film
Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
CBA116
Eccentricity
wmax. = w + Δw
hmax. = h + Δh
Imax. = I + ΔI
Seating plane
F1772 X2
www.vishay.com Vishay Roederstein
Revision: 16-Aug-17 6Document Number: 28161
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHARACTERISTICS
Capacitance as a function of ambient temperature
(typical curve)
Impedance as a function of frequency
(typical curve)
Tangent of loss angle as a function of frequency
(typical curve)
Resonant frequency as a function of capacitance
(typical curve)
Max. RMS voltage as a function of frequency Max. RMS current as a function of frequency
- 60 - 20 20
ΔC/C
(%)
2
- 2
- 4
- 6
0
60 100Tamb (°C)
4
6
min.
max.
1 kHz
typical
Z (Ω)
10 1
0.01 0.05 1.0 5.0 10 50 100
100
10-1
10-2
10-3
0.1 0.5
2.2 µF
0.47 µF
1.5 µF
0.22 µF
1.0 µF
0.1 µF
0.68 µF
0.047 µF
0.33 µF
0.022 µF
0.15 µF
0.068 µF
0.033 µF
0.015 µF
0.01 µF
f (MHz)
Dissipation factor
(x 10
-4
)
10
1
10
2
10
3
f (Hz)
10
2
10
3
10
4
10
5
3
2
1
C ≤ 0.33 µF (curve 1)
0.33 µF < C ≤ 1.2 µF (curve 2)
1.2 µF < C ≤ 2.2 µF (curve 3)
101102103104
C (nF)
f (MHz)
10-1
100
101
102
X2
Tamb ≤ 110 °C
AC voltage
(V)
103
102
101
f (Hz)
101102103104105
f (Hz)
AC current (mA)
T
amb
≤ 110 °C
2200 nF
101102103104105
10-1
100
101
102
103
104
1000 nF
470 nF
100 nF
47 nF
10 nF
F1772 X2
www.vishay.com Vishay Roederstein
Revision: 16-Aug-17 7Document Number: 28161
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Insulation resistance as a function of ambient temperature (typical curve)
APPLICATION NOTES AND LIMITING CONDITIONS
• For X2 electromagnetic interference suppression where a higher stabililty grade is needed for continuous across the line
applications (50 Hz/60 Hz) with a maximum mains voltage of 310 VAC.
• These capacitors are not intended for continuous pulse application. For these situations capacitors of the AC and pulse
programs must be used.
• For series impedance applications we refer to application note: www.vishay.com/doc?28153
• The maximum ambient temperature must not exceed 110 °C.
• Rated voltage pulse slope:
if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 VDC and
divided by the applied voltage.
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14
ed 3 and Specific Reference Data”.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1 Dimensions (detail) As specified in chapter “General Data” of this
specification
Initial measurements Capacitance
Tangent of loss angle:
for C 1 µF at 10 kHz
for C > 1 µF at 1 kHz
4.3 Robustness of terminations Tensile: load 10 N; 10 s
Bending: load 5 N; 4 x 90°
No visible damage
4.4 Resistance to soldering heat No pre-drying
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
T
amb
(°C)
105
104
102
103
- 60 - 20 20 60 100
RC (s)
F1772 X2
www.vishay.com Vishay Roederstein
Revision: 16-Aug-17 8Document Number: 28161
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.19 Component solvent resistance Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time: min. 1 h, max. 2 h
4.4.2 Final measurements Visual examination No visible damage
Legible marking
Capacitance |C/C| 5 % of the value measured initially
Tangent of loss angle Increase of tan
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured initially
Insulation resistance As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
Initial measurements Capacitance
Tangent of loss angle:
for C 1 µF at 10 kHz
for C > 1 µF at 1 kHz
4.20 Solvent resistance of the marking Isopropylalcohol at room temperature
Method: 1
Rubbing material: cotton wool
Immersion time: 5 min ± 0.5 min
No visible damage
Legible marking
4.6 Rapid change of temperature A = -40 °C
B = +110 °C
5 cycles
Duration t = 30 min
4.6.1 Inspection Visual examination No visible damage
4.7 Vibration Mounting:
see section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s
(whichever is less severe)
Total duration 6 h
4.7.2 Final inspection Visual examination No visible damage
4.9 Shock Mounting:
See section “Mounting” for more information
Pulse shape: half sine
Acceleration: 490 m/s
Duration of pulse: 11 ms
4.9.2 Final measurements Visual examination No visible damage
Capacitance |C/C| 5 % of the value measured initally
Tangent of loss angle Increase of tan
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured initially
Insulation resistance As specified in section “Specific Reference”
of this specification
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
F1772 X2
www.vishay.com Vishay Roederstein
Revision: 16-Aug-17 9Document Number: 28161
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SUB-GROUP C1 COMBINED SAMPLE
OF SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.11 Climatic sequence Capacitance
4.11.1 Initial measurements Measured in 4.4.2 and 4.9.2
Tangent of loss angle
Measured initally in C1A and C1B
4.11.2 Dry heat Temperature: 110 °C
Duration: 16 h
4.11.3 Damp heat cyclic
Test Db, first cycle
4.11.4 Cold Temperature: -40 °C
Duration: 2 h
4.11.5 Damp heat cyclic
Test Db, remaining cycles
4.11.6 Final measurements Visual examination No visible damage
Legible marking
Capacitance |C/C| 5 % of the value measured in 4.11.1
Tangent of loss angle Increase of tan
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured in 4.11.1
Voltage proof
1350 VDC 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.12 Damp heat steady state 56 days, 40 °C, 90 % to 95 % RH
No load
4.12.1 Initial measurements Capacitance
Tangent of loss angle: 1 kHz
4.12.3 Final measurements Visual examination No visible damage
Legible marking
Capacitance |C/C| 5 % of the value measured in 4.12.1
Tangent of loss angle Increase of tan
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured in 4.12.1
Voltage proof
1350 VDC; 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
F1772 X2
www.vishay.com Vishay Roederstein
Revision: 16-Aug-17 10 Document Number: 28161
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SUB-GROUP C3
4.13.1 Initial measurements Capacitance
Tangent of loss angle:
for C 1 µF at 10 kHz
for C > 1 µF at 1 kHz
4.13 Impulse voltage 3 successive impulses, full wave, peak
voltage:
X2: 2.5 kV for C 1 µF
X2: 2.5 kV/C for C > 1 µF
Max. 24 pulses
No self healing breakdowns or flash-over
4.14 Endurance Duration: 1000 h
1.25 x URAC at 110 °C
Once in every hour the voltage is increased to
1000 V (RMS) for 0.1 s via resistor of
47 ± 5 %
4.14.7 Final measurements Visual examination No visible damage
Legible marking
Capacitance |C/C| 5 % compared to values measured
in 4.13.1
Tangent of loss angle Increase of tan
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured in 4.13.1
Voltage proof
1350 VDC; 1 min between terminations
2120 VAC; 1 min between terminations and
case
No permanent breakdown or flash-over
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.15 Charge and discharge 10 000 cycles
Charged to 435 VDC
Discharge resistance:
4.15.1 Initial measurements Capacitance
Tangent of loss angle:
for C 1 µF at 10 kHz
for C > 1 µF at 1 kHz
4.13.3 Final measurements Capacitance |C/C| 10 % compared to values measured
in 4.15.1
Tangent of loss angle Increase of tan
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured in 4.15.1
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
R435 VDC
1.5 x C dU dt
------------------------------------------
=
F1772 X2
www.vishay.com Vishay Roederstein
Revision: 16-Aug-17 11 Document Number: 28161
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SUB-GROUP C5
4.16 Radio frequency characteristic Resonance frequency 0.9 times the value as specified in section
“Resonant Frequency” of this specification.
SUB-GROUP C6
4.17 Passive flammability
Class C
Bore of gas jet: Ø 0.5 mm
Fuel: butane
Test duration for actual volume V in mm:
V 250: 5 s
250 < V 500: 10 s
500 < V 1750: 20 s
V > 1750: 30 s
One flame application
After removing test flame from capacitor, the
capacitor must not continue to burn for more
than 30 s. No burning particle must drop from
the sample.
SUB-GROUP C7
4.18 Active flammability 20 cycles of 2.5 kV discharges on the test
capacitor connected to URAC.
The cheese cloth around the capacitors shall
not burn with a flame.
No electrical measurements are required.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
45.0°
~ 8 mm
12 mm
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
