EcoSPARK(R)2 335mJ, 400V, N-Channel Ignition IGBT Features Applications o SCIS Energy = 335mJ at TJ = 25 C Automotive lgnition Coil Driver Circuits Logic Level Gate Drive Coil On Plug Applications Qualified to AEC Q101 RoHS Compliant Package Symbol JEDEC TO-263AB D-Pak JEDEC TO-220AB E C G COLLECTOR G E R1 GATE JEDEC TO-252AA D-Pak R2 G E EMITTER COLLECTOR (FLANGE) Device Maximum Ratings TA = 25C unless otherwise noted Symbol Parameter BVCER Collector to Emitter Breakdown Voltage (IC = 1mA) Ratings 400 Units V BVECS Emitter to Collector Voltage - Reverse Battery Condition (IC = 10mA) 28 V ESCIS25 Self Clamping Inductive Switching Energy (Note 1) 335 mJ 195 mJ ESCIS150 Self Clamping Inductive Switching Energy (Note 2) IC25 Collector Current Continuous, at VGE = 4.0V, TC = 25C 26.9 A IC110 Collector Current Continuous, at VGE = 4.0V, TC = 110C 25 A VGEM Gate to Emitter Voltage Continuous 10 V Power Dissipation Total, at TC = 25C 166 W 1.1 W/oC PD Power Dissipation Derating, for TC > 25oC TJ Operating Junction Temperature Range -40 to +175 o C TSTG Storage Junction Temperature Range -40 to +175 o C TL Max. Lead Temp. for Soldering (Leads at 1.6mm from case for 10s) 300 o C TPKG Max. Lead Temp. for Soldering (Package Body for 10s) 260 o C ESD Electrostatic Discharge Voltage at100pF, 1500 @2014 Semiconductor Components Industries, LLC. August-2017, Rev.3 4 kV Publication Order Number: FGB3440G2-F085/D FGB3440G2-F085 / FGD3440G2-F085 / FGP3440G2-F085 FGB3440G2-F085 / FGD3440G2-F085 FGP3440G2-F085 Device Device Marking Package FGB3440G2 FGB3440G2-F085 FGD3440G2 FGD3440G2-F085 TO-263AB TO-252AA FGP3440G2 FGP3440G2-F085 TO-220AB Reel Size 330mm Tape Width 24mm 800 330mm 16mm N/A 2500 50 Tube Quantity Electrical Characteristics TA = 25C unless otherwise noted Symbol Parameter Test Conditions Min Typ Max Units Off State Characteristics BVCER ICE = 2mA, VGE = 0, Collector to Emitter Breakdown Voltage RGE = 1K, TJ = -40 to 150oC 370 400 430 V BVCES ICE = 10mA, VGE = 0V, Collector to Emitter Breakdown Voltage RGE = 0, TJ = -40 to 150oC 390 420 450 V BVECS Emitter to Collector Breakdown Voltage ICE = -20mA, VGE = 0V, TJ = 25C 28 - - V BVGES Gate to Emitter Breakdown Voltage IGES = 2mA 12 14 - V Collector to Emitter Leakage Current VCE = 250V, RGE=1K - - 25 A - - 1 mA IECS Emitter to Collector Leakage Current VEC = 24V, - - 1 - - 40 R1 Series Gate Resistance R2 Gate to Emitter Resistance ICER TJ = 25oC TJ = 150oC TJ = 25oC TJ = 150oC mA - 120 - 10K - 30K - 1.1 1.2 V - 1.3 1.45 V - 1.6 1.75 V - - 335 mJ On State Characteristics VCE(SAT) Collector to Emitter Saturation Voltage ICE = 6A, VGE = 4V, VCE(SAT) Collector to Emitter Saturation Voltage ICE = 10A, VGE = 4.5V, VCE(SAT) Collector to Emitter Saturation Voltage ICE = 15A, VGE = 4.5V, L = 3.0 mHy, VGE = 5V ESCIS Self Clamped Inductive Switching RG = 1K, (Note 1) TJ = 25oC TJ = 150oC TJ = 150oC o TJ = 25 C Notes: 1: Self Clamping Inductive Switching Energy(ESCIS25) of 335mJ is based on the test conditions that is starting TJ=25 oC; L=3mHy, ISCIS=15A,VCC=100V during inductor charging and VCC=0V during the time in clamp . 2: Self Clamping Inductive Switching Energy (ESCIS150) of 195mJ is based on the test conditions that is starting TJ=150 oC; L=3mHy, ISCIS=11.4A,VCC=100V during inductor charging and VCC=0V during the time in clamp. www.onsemi.com 2 FFGB3440G2-F085 / FGD3440G2-F085 / FGP3440G2-F085 Package Marking and Ordering Information Symbol Parameter Test Conditions Min Typ - 24 Max Units Dynamic Characteristics QG(ON) Gate Charge ICE = 10A, VCE = 12V, VGE = 5V - nC 1.3 1.7 2.2 0.75 1.2 1.8 VCE = 12V, ICE = 10A - 2.8 - V Current Turn-On Delay Time-Resistive VCE = 14V, RL = 1 VGE = 5V, RG = 1K Current Rise Time-Resistive TJ = 25oC, - 1.0 4 s - 2.0 7 s - 5.3 15 s - 2.3 15 s - - 0.9 oC/W VGE(TH) Gate to Emitter Threshold Voltage ICE = 1mA, VCE = VGE, VGEP Gate to Emitter Plateau Voltage TJ = 25oC TJ = 150oC V Switching Characteristics td(ON)R trR td(OFF)L tfL Current Turn-Off Delay Time-Inductive VCE = 300V, L = 1mH, VGE = 5V, RG = 1K Current Fall Time-Inductive ICE =6.5A, TJ = 25oC, Thermal Characteristics RJC Thermal Resistance Junction to Case www.onsemi.com 3 FGB3440G2-F085 / FGD3440G2-F085 / FGP3440G2-F085 Electrical Characteristics TA = 25C unless otherwise noted 10 o TJ = 150 C 1 10 SCIS Curves valid for Vclamp Voltages of <430V 100 tCLP, TIME IN CLAMP (S) 1000 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 1. Self Clamped Inductive Switching Current vs. Time in Clamp 1.20 o TJ = 25 C 10 o TJ = 150 C 0 SCIS Curves valid for Vclamp Voltages of <430V 0 6 9 L, INDUCTANCE (mHy) 15 12 Figure 2. Self Clamped Inductive Switching Current vs. Inductance ICE = 10A VGE = 4.0V VGE = 3.7V 1.35 1.30 VGE = 8V 1.25 VGE = 5V 1.05 Figure 3. Collector to Emitter On-State Voltage vs. Junction Temperature 30 VGE = 8.0V VGE = 5.0V VGE = 4.5V VGE = 4.0V 20 VGE = 3.7V 10 o TJ = -40 C 1 2 3 4 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 5. Collector to Emitter On-State Voltage vs. Collector Current VGE = 4.5V VGE = 8V 1.15 1.00 -75 -50 -25 0 25 50 75 100 125 150 175 o TJ, JUNCTION TEMPERTURE ( C) 0 VGE = 5V 1.20 VGE = 4.5V 0 3 1.40 1.10 ICE, COLLECTOR TO EMITTER CURRENT (A) 20 1.45 VGE = 4.0V 1.15 RG = 1K, VGE = 5V, VCE = 100V 1.50 ICE = 6A VGE = 3.7V ISCIS, INDUCTIVE SWITCHING CURRENT (A) o TJ = 25 C 30 VCE, COLLECTOR TO EMITTER VOLTAGE (V) RG = 1K, VGE = 5V, VCE = 100V 1.10 -75 -50 -25 0 25 50 75 100 125 150 175 o TJ, JUNCTION TEMPERTURE ( C) Figure 4. Collector to Emitter On-State Voltage vs. Junction Temperature ICE, COLLECTOR TO EMITTER CURRENT (A) ISCIS, INDUCTIVE SWITCHING CURRENT (A) 100 30 VGE = 8.0V VGE = 5.0V VGE = 4.5V VGE = 4.0V 20 VGE = 3.7V 10 o 0 TJ = 25 C 0 1 2 3 4 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 6. Collector to Emitter On-State Voltage vs. Collector Current www.onsemi.com 4 FGB3440G2-F085 / FGD3440G2-F085 / FGP3440G2-F085 Typical Performance Curves 30 VGE = 8.0V VGE = 5.0V VGE = 4.5V VGE = 4.0V 20 VGE = 3.7V 10 o 0 TJ = 175 C 0 1 2 3 4 VCE, COLLECTOR TO EMITTER VOLTAGE (V) ICE, COLLECTOR TO EMITTER CURRENT (A) ICE, COLLECTOR TO EMITTER CURRENT (A) (Continued) 30 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VCE = 5V 20 TJ = 175oC 10 TJ = 25oC TJ = -40oC 0 1 VTH, THRESHOLD VOLTAGE (V) ICE, DC COLLECTOR CURRENT (A) VGE = 4.0V 20 10 0 25 50 100 125 150 75 o TC, CASE TEMPERATURE( C) 2.0 VCE = VGE ICE = 1mA 1.8 1.6 1.4 1.2 1.0 -50 175 Figure 9. DC Collector Current vs. Case Temperature -25 0 25 50 75 100 125 150 175 TJ, JUNCTION TEMPERATURE(oC) Figure 10. Threshold Voltage vs. Junction Temperature 10000 12 VECS = 24V SWITCHING TIME (S) LEAKAGE CURRENT (A) ICE = 6.5A, VGE = 5V, RG = 1K 1000 100 10 VCES = 300V 1 8 0 25 50 75 100 125 150 175 o TJ, JUNCTION TEMPERATURE ( C) Figure 11. Leakage Current vs. Junction Temperature Inductive tOFF 6 4 2 -25 Resistive tOFF 10 VCES = 250V 0.1 -50 4 Figure 8. Transfer Characteristics Figure 7. Collector to Emitter On-State Voltage vs. Collector Current 30 2 3 VGE, GATE TO EMITTER VOLTAGE (V) 0 25 Resistive tON 50 75 100 125 150 o TJ, JUNCTION TEMPERATURE ( C) Figure 12. Switching Time vs. Junction Temperature www.onsemi.com 5 175 FGB3440G2-F085 / FGD3440G2-F085 / FGP3440G2-F085 Typical Performance Curves VGS, GATE TO EMITTER VOLTAGE(V) (Continued) CAPACITANCE (pF) 2000 f = 1MHz VGE = 0V 1600 CIES 1200 800 CRES 400 0 COES 20 5 10 15 VDS, DRAIN TO SOURCE VOLTAGE (V) 25 10 o ICE = 10A, TJ = 25 C 8 VCE = 6V 6 VCE = 12V 4 2 0 0 10 BVCER, BREAKDOWN VOLTAGE (V) Figure 13. Capacitance vs. Collector to Emitter Voltage 20 30 40 50 Qg, GATE CHARGE(nC) 60 70 Figure 14. Gate Charge 440 ICER = 10mA 420 o TJ = -40 C o TJ = 25 C 400 o TJ = 175 C 380 10 100 RG, SERIES GATE RESISTANCE () 1000 6000 Figure 15. Break down Voltage vs. Series Gate Resistance 2 DUTY CYCLE - DESCENDING ORDER NORMALIZED THERMAL IMPEDANCE, ZJC 1 D = 0.50 0.2 PDM 0.1 0.1 0.01 -5 10 0.05 t1 0.02 t2 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJC x RJC + TC 0.01 SINGLE PULSE -4 10 -3 -2 10 10 t, RECTANGULAR PULSE DURATION(s) -1 10 Figure 16. IGBT Normalized Transient Thermal Impedance, Junction to Case www.onsemi.com 6 1 FGB3440G2-F085 / FGD3440G2-F085 / FGP3440G2-F085 Typical Performance Curves L VCC R or L C PULSE GEN RG G LOAD C RG = 1K DUT G + DUT 5V E VCC E Figure 17. Inductive Switching Test Circuit Figure 18. tON and tOFF Switching Test Circuit BVCES VCE tP VCE L C VARY tP TO OBTAIN REQUIRED PEAK ISCIS VGE ISCIS VCC + RG G VCC DUT - E tP 0V ISCIS 0 0.01 tAV Figure 19. Energy Test Circuit Figure 20. Energy Waveforms www.onsemi.com 7 FGB3440G2-F085 / FGD3440G-F085 / FGP3440G2-F085 Test Circuit and Waveforms FGB3440G2-F085 / FGD3440G2-F085 / FGP3440G2-F085 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com (c) Semiconductor Components Industries, LLC www.onsemi.com 8