240-053P - Digilent, Inc. - Product.Network

Digilentinc.com Blog Learn

Accessories

Screws, clips, speakers, battery holders, cables, wires, and other assorted useful parts.

Software Defined Radio (SDR) Kit

• Contains all the parts needed to construct a complete software radio station

with a Xilinx ML605 & an Analog Devices FMCOMMS1 board (boards sold seperately)

• Kit includes:

◦2 plexiglass covers

◦cooling fan

◦mounting hardware

◦2 antennae

USB A to B cable

• Nearly 5 feet in length

•Part# 250-059

USB A to mini B cable

• Nearly 5 feet in length

•Part# 310-054P

USB A to micro B cable

• Nearly 5 feet in length

•Part# 310-053P

IR Range Sensor

• Measuring range: 10-80 cm

• Current consumption: 30mA typical

• Supply voltage: 4.5 - 5.5 V

• Includes 10" 3-wire cable

BNC Oscilloscope Probes (pair)

• BNC-terminated

• Selectable 1X/10X input attenuation

• Contraction hook tip

• 12cm ground clip

• Localization sleeve adapts to IC testing

Mini "Grabber" test hooks

• Lightweight and durable construction

• Two signal connection points for Discovery signal wires

• Six colors coordinated to Discovery signal wire colors

• Able to grasp conductors up to 1.27mm in diameter

Page 1 of 6

Learn more about

Digilent Design Contest

2014!

IR Proximity Sensor (

-pack)

• Fairchild QRB1134 Phototransistor Reflective Object Sensor

• Ideal for use with the PmodLS1

•Part# 240-012

40-pin DIP Socket

• Perfect for our C-MOD or anything in the 2x20-pin DIP package

• Current rating: 1Amp

• Contact resistance: 20mΩ max

• Note: This product has pins for through-hole mounting and is not suitable for surface

mounting.

•Part# 163-053

Desktop Switching Power Supply

• 5VDC Switching Power Supply, 4000mA

• Suitable for use with the Virtex-II Pro (V2-Pro)

• US, EU, UK Plug options available

5V 4000mA Switching Power Supply

• 5VDC switching supply, with 4000mA current

• Comes with US and EU plug adapters

• For use with Digilent FPGA & Microcontroller boards

•Part# 240-030

5V 2.5A Switching Power Supply

• 5V, 2.5A Switching Power Supply

• Suitable for use with the ZYBO™ FPGA board.

•Part# 300-031P

Heatsink w/ Clip

• Self-adhesive backing with clip for easy installation and removal

• Measures 35mm X 35mm X 10mm

• Perfect for the Virtex-5 board

•Part# 6003-170-003

Pmod Clip

• Useful for securely attaching a Pmod to your project or application

• Works with any Pmod 0.80" in width

• Can also accomodate a Cerebot Nano

• Ships with 8-32 nut & screw

•Part# 240-107

Standoffs

•Contains:

◦4 hexagonal standoffs (6-32 x 0.375)

◦4 machine screws (6-32 x 0.250)

◦4 nylon washers

•Part# 240-020

Speaker

• Nominal Impedance 4 Ohms at 1V (1000Hz)

• Frequency Bandwidth 880Hz to 10kHZ

• Max power input 5W

•Part# 310-027

512Mbytes DDR DRAM

• 512Mbytes of fast DDR DRAM

Page 2 of 6

• Can be used with the XUPV2P boar

•Part# D350-000

256Mbytes DDR DRAM

• 256Mbytes of fast DDR DRAM

• Can be used with the XUPV2P board

•Part# 350-001

Battery Holder (4 x AA)

• Holds four AA cells

• Header connector for easy connection to many Digilent boards

• Polycarbonate construction

•Part# 163-165

Battery Holder (2 x AA)

• Holds two AA cells

• Header connector for easy connection to many Digilent boards

• Polycarbonate construction

•Part# 163-043

Solderless Breadboard Kit - Small

• Convenient breadboard for constructing small-to-medium circuits

• Self-adhesive backing - can be affixed to any surface

• 1x 630 tie point terminal strip

• 1x 100 tie point distribution strip

• 1.75 x 4.5 inches

•Part# 340-015

Solderless Breadboard Kit - Large

• Large breadboard with rugged steel backing

• 3x 630 tie point terminal strips

• 5x 100 tie point distribution strips

• Four screw terminals for power supply connections

• 5 adhesive rubber feet

•Part# 340-002P

Analog Parts Kit

• Large selection of components designed to create a wide variety of useful

experiments & devices

• Includes transistors, resistors, capacitors, diodes, sensors, and more

• Also includes a variety of useful ICs like Op Amps, convertors, and regulators

• Comes with an assortment of lead wires, a solderless breadboard, and a screwdiver

•This kit can also be bundled with an Analog Discovery for $20 off!

Wire Kit

• 140 pieces of pre-trimmed .22ga jumper wires, in various lengths and colors

• Contained in hard plastic box

•Part# 310-001

XUP Fly Wire Assembly

• For use with the XUP USB-JTAG Programming Cable (above)

• Breaks out each of the six JTAG signals to individual female headers, the signal name printed

on each wire

• Allows for use of the Programming Cable with boards utilizing different JTAG connectors.

•Part# 250-041

USB to Serial Adapter Cable

• Plugs into any USB port and provides a serial connection

• Allows newer PCs without their own serial ports to program serial-only system boards

Page 3 of 6

•Part# 310-035P

UART Crossover Cable

• 6", 6-pin crossover cable

• Connects newer UART-interface Pmods (PmodBT) to older microcontroller boards (Cerebot

2, Cerebot 32MX4, etc.)

• Connects older UART-interface Pmods (PmodCLS, PmodRS232, etc.) to newer

microcontroller boards (Coming soon)

• For more information on where / how to use this cable, please see this document.

•Part# 250-047

VHDCI Male-to-Male Cable

• VHDCI male connector on both ends

• 16" in length

• Useful for connecting Vmods to VHDCI-equipped system boards (Genesys, Atlys, ...)

•Part# 250-045P

HDMI Cable (Type A to Type A)

• 40" in length

•Part# 240-053P

HDMI Cable (Type A to Type D micro)

• 40" in length

•Part# 310-051P

6 Pin Cable Connector

• available in lengths of 6", 12", and 18"

• designed for use with Digilent peripheral modules

• can be used to send FPGA signals to an outside device

• 6-pin connectors are standard 100mil spaced 25mil square connectors

• allow signals to be routed to and from an FPGA on a Digilent system board

•Part# 310-009 / 310-034 / 310-010

2x6 Pin Cable

• Designed to connect a 12-pin Pmod to a 12-pin system board connector

• Can be used to send Digilent System board signals to and from outside devices

• Uses standard 100mil-spaced 25mil square connectors

• 7" (18mm) in length

•Part# 250-032P

2x6 Pin to Dual 6 Pin Cable

• Designed for use with Digilent Peripheral Modules that have 2x6 pin connectors

• Designed to connect two 6-pin system board connectors to a 12-pin Pmod connector, or to

connect a 12-pin system board connector to two 6-pin Pmod connectors

• Uses standard 100mil-spaced 25mil square connectors

• 7" (18mm) in length

•Part# 250-030

6Pin Header & Gender Changer

• Changes gender for any 6 pin female header, female to male

• Connects any 2 digilent 6 pin cables together

• Provides easy access for test and measurement

• Ships in pack of 5

•Part# 240-004

PICkit3 Programming Cable Kit

• For connecting a chipKIT™ board to Microchip's PICkit3 debugger/programmer.

Page 4 of 6

• Includes a 6"

-pin cable, a 6-pin gender changer, and a

-pin right angle male header

•Part# 240-035

2x6 Pin Header

• Acts as a female-to-male gender changer for a 2x6 pin female header or cable

• Can connect any two Digilent 2x6 pin cables together

• Provides easy access for test and measurement

• Ships in pack of 5

•Part# 240-062P

VHDCI Connector

• 2x34 pins, male

• Right angle type for through-hole mounting

• Part #: R-HI-008068-2

•Part# 163-433P

Hirose FX2 Socket Connector

• Right angle type for through-hole mounting

• Hirose part# FX2-100S-1.27DS

•Part# 163-062

Cat 5E Ethernet Cable

• Standard RJ-45 connectors

• 10' Category 5E ethernet cable

•Part# 310-011

Coax Power Cable

• 2.1mm female power connector for use with Digilent power supplies

• Useful for any Digilent product that can accept power from an outside source

•Part# 310-024

6 Pin MTE Cable

• Provides the option to separate 6 signals using MTE connectors

• 6-pin connectors are standard 100mil spaced 25mil square connectors

• Can be used with any Digilent board

• Ideal for testing and verification

•Part# 310-014P

4-Pin MTE Cable

• 9" in length

• Can be used with any Digilent board

• Ideal for testing and verification

•Part# 250-060

4-pin to 2x2-pin MTE Cable

• 9" in length

• Can be used with any Digilent board

• Ideal for testing and verification

•Part# 240-021-4P

2 Pin MTE Cable

• available in lengths of 9" and 18"

Page 5 of 6

• Ships in pack o

• Can be used with any Digilent board

• Ideal for testing and verification

•Part# 240-006 / 240-007

1 Pin MTE Cable

• 6" in length

• Ships in pack of 5

• Can be used with any Digilent board

• Ideal for testing and verification

•Part# 240-005

2 Pin MTE Power Cable

• Provide power to battery connection on a Digilent Board

• Provides access to any 2 signals that are tied to any 100mil spaced pins

•Part# 310-025P

Protective covers for your XUPV2P board.

• Protects both sides of the V2P board

• Made from durable plexiglas

• Covers have cutouts for all connectors, buttons, and switches

•Part# 6003-170-002

European/UK wall plug adapter

• convienent way to switch from US wall plug to European or UK wall plugs

• simple snap-on design

• used with Digilent Inc.'s switching power supplies

• US to European wall plug adapter

• US to UK wall plug adapter

•Part# 300-008 / 300-009

Digilent, Inc. | P.O. Box 428 Pullman, WA 99163-0428 | (509) 334-6306 (voice) (509) 334-6300 (fax) | Contact us

Page 6 of 6

201

htt

://www.di

ilentinc.com/Products/Catalo

.cfm?NavPath=2,393&Cat=